PHMKDG415.3.40 [VISHAY]
Film Capacitor, Polypropylene, 415V, 739.2uF, Stud Mount;型号: | PHMKDG415.3.40 |
厂家: | VISHAY |
描述: | Film Capacitor, Polypropylene, 415V, 739.2uF, Stud Mount 电容器 |
文件: | 总3页 (文件大小:239K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PhMKDg
Vishay ESTA
ESTAdry D-Type Capacitor For Indoor Use
RATED OUTPUT
50 kvar, other outputs upon request
CASING
Aluminum, welded and hermetically sealed
DEGREE OF PROTECTION
IP00, Indoor (higher degrees of protection up to IP54 upon
request)
STANDARDS
EN60831-1/-2, IEC60831-1/-2 (VDE 0560-46/-47)
LOSSES (INCLUDING DISCHARGE RESISTORS)
Less than 0.45 W per kvar at upper temperature limit
DIELECTRIC
Polypropylene film
IMPREGNANT
Without, dry type, NON-PCB, NON-toxic
ELECTRODES
Self-healing
SAFETY DEVICES
Self-healing dielectric and overpressure tear-off fuses
external discharge resistors for U ≤ 50 V, t = 60 s
(for IP00 version)
TEMPERATURE CLASS
- 25/D (max. 55 °C), (- 40/D upon request)
SHELF TEMPERATURE
- 40/+ 70 °C
SWITCH-IN-CURRENT
Max. 300 x IN
INSULATION
6/15 kV
IP53
ESTAdry D-TYPE THREE PHASE MK-POWER
CAPACITOR ACCORDING TO EN60831-1/-2
FOR INDOOR APPLICATION
TESTS
Terminal/Terminal: 2.15 x UN/2 s
Terminal/Casing: 6000 V/2 s
MK = Metallized Plastic Film Dielectric
RECOMMENDED TORQUES
ESTAdry MK-type capacitor for power factor correction in
low voltage systems.
STYLE
RECOMMENDED TORQUE
Terminals M8
Terminals M10
M12 mounting stud
6 Nm
10 Nm
10 Nm
RATED VOLTAGES
400 V, 415 V, 440 V, 460 V, 525 V, 690 V, 760 V
RATED FREQUENCY
50 Hz*
* Can also be used for 60 Hz. The output will be 1.2 times higher. A lower class of temperature might be taken into account.
Document Number: 13050
Revision: 13-Nov-07
www.vishay.com
3
PhMKDg
ESTAdry D-Type Capacitor For Indoor Use
Vishay ESTA
REQUIRED SPACE FOR BULGING
M10
SCREW BOLT M10
HEXAGONAL NUT M10
SPRING WASHER WAVE
SLOTTED NUT M10
SCREW BOLT M8 x 15
TOOTHED LOCK WASHER
HEXAGONAL NUT M12
M12
172
70
DISCHARGE RESISTORS
Δ
Y
RATED VOLTAGE
RATED OUTPUT
kvar
CAPACITANCE
µF
CURRENT
A
WEIGHT
kg
HEIGHT H
mm
TYPE
V
PHMKDG 400.3.50
PHMKDG 415.3.40
PHMKDG 415.3.50
PHMKDG 440.3.50
PHMKDG 440.3.56, 2
PHMKDG 460.3.50
PHMKDG 525.3.50
PHMKDG 690.2.50
PHMKDG 760.2.50
400
415
415
440
440
460
525
690
760
50
40
3 x 331.6 Δ
3 x 246.4 Δ
3 x 308.0 Δ
3 x 274.0 Δ
3 x 308.0 Δ
3 x 250.7 Δ
3 x 192.5 Δ
3 x 334.3 Y
3 x 275.5 Y
72
56
70
66
74
63
55
42
38
app. 4.9
app. 4.9
app. 4.9
app. 4.9
app. 4.9
app. 4.9
app. 4.9
app. 4.9
app. 4.9
210
210
210
210
210
210
210
210
210
50
50
56.2
50
50
50
50
www.vishay.com
4
Document Number: 13050
Revision: 13-Nov-07
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号:
PHMKP440.3.14.0
Film Capacitor, Polypropylene, 440V, 10% +Tol, 5% -Tol, 76.7uF, Stud Mount, CAN
VISHAY
PHMKP440.3.30
Film Capacitor, Polypropylene, 440V, 5% +Tol, 5% -Tol, 164.4uF, Stud Mount, CAN
VISHAY
PHMKP525.3.13.8
Film Capacitor, Polypropylene, 525V, 10% +Tol, 5% -Tol, 53.1uF, Stud Mount, CAN
VISHAY
©2020 ICPDF网 联系我们和版权申明