PR25L5%F251K [VISHAY]
RES,AXIAL,METAL FILM,51K OHMS,750WV,5% +/-TOL,-250,250PPM TC;型号: | PR25L5%F251K |
厂家: | VISHAY |
描述: | RES,AXIAL,METAL FILM,51K OHMS,750WV,5% +/-TOL,-250,250PPM TC 电阻器 |
文件: | 总4页 (文件大小:118K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PR02L, PR2.5L, PR2.5LS
Vishay BCcomponents
HID Lamp Metal Film Leaded Resistors
FEATURES
• Metal film technology
• High power in small package (2 W/0309,
2.5 W/0414)
• High stability, reliability during lamp ignitions
• Suitable for high temperature operations
• Compatible with lead (Pb)-free and lead containing
soldering processes
• Compliant to RoHS directive 2002/95/EC
A homogenous film of CrSi alloy is deposited on a high-
grade ceramic body. The ohmic value is adjusted by means
of a helical groove on the resistive layer. Steel copper plated
wires are then welded on the stainless steel end caps. The
resistor is not coated.
APPLICATIONS
• HID lamps
TECHNICAL SPECIFICATIONS
DESCRIPTION
PR02L
PR2.5L
PR2.5LS
Resistance Range (1)
Resistance Tolerance (2)
Temperature Coefficient
Rated Dissipation P70
2 kΩ to 70 kΩ
5 ꢀ, E24 series
250 ppm/K
2 W
2.5 W
750 V
Maximum Permissible Voltage
(Umax. AC/DC)
500 V
≥ 4 kgf
Pull Test
≥ 2.3 kgf
Notes
(1)
(2)
Other values available on request
Other tolerances available on request
PART NUMBER AND PRODUCT DESCRIPTION (3)
PART NUMBER (4): PR02L00001802JR500
P
R
0
2
L
0
0
0
0
1
8
0
2
J
R
5
0
0
MODEL/SIZE
VARIANT
WIRE TYPE TCR/MATERIAL
0 = Standard 0 = Standard
VALUE
TOLERANCE PACKAGING (5)
SPECIAL
PR02L0
PR25L0
PR25LS
0 = Neutral
3 digit value
1 digit multiplier
MULTIPLIER
1 = *101
J = 5 ꢀ
R2
R5
F5
F2
Up to 2 digits
00 = Standard
2 = *102
3 = *103
4 = *104
PRODUCT DESCRIPTION: PR02L 5 % R5 18K
PR02L
5 %
R5
18 kΩ
MODEL
TOLERANCE
PACKAGING (5)
RESISTANCE VALUE
PR02L
PR25L
PR25LS
5 %
R2
R5
F5
F2
18K = 18 kΩ
Notes
(3) The PART NUMBER is shown to facilitate the introduction of the unified part numbering system
(4) For historical 12NC information please contact factory
(5) Please refer to table PACKAGING, see next page
Document Number: 30258
Revision: 16-Oct-09
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
45
PR02L, PR2.5L, PR2.5LS
HID Lamp Metal Film Leaded Resistors
Vishay BCcomponents
PACKAGING
REEL
LOOSE IN BOX
MODEL
PIECES
CODE
R5
PIECES
5000
1500
-
CODE
PR02L
5000
2500
2500
F5
F2
-
PR2.5L
PR2.5LS
R2
R2
Note
• F2 and F5 are formed leads
DIMENSIONS
A
L1
Ø d
Ø D
DIMENSIONS - resistor types, mass and relevant physical dimensions
L1
(mm)
Dmax.
(mm)
Ø d
(mm)
A
(mm)
MASS
TYPE
(mg)
600
650
750
PR02L
8.3 0.1
15.5 0.3
21.5 0.3
3.55
3.55
3.55
0.80 0.03
0.80 0.03
0.80 0.03
59.0 1.5
63.0 1.5
63.0 1.5
PR2.5L
PR2.5LS
PREFORMED STYLE
A1
A3
L
A2
Ø D
H
Ø d
DIMENSIONS - preformed style
Lmax.
(mm)
Dmax.
(mm)
Ø d
(mm)
H
(mm)
A1
(mm)
A2
(mm)
A3
(mm)
MASS
(mg)
TYPE
PR02L
8.3 0.1
3.55
0.80 0.03
9.0 1.0
30.7 2.0
10.0 1.0
3.5 1.0
400
www.vishay.com
46
For technical questions, contact: filmresistorsleaded@vishay.com
Document Number: 30258
Revision: 16-Oct-09
PR02L, PR2.5L, PR2.5LS
HID Lamp Metal Film Leaded Resistors
Vishay BCcomponents
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with IEC 60115-1 specification, category LCT/UCT/56 (rated temperature
range: Lower category temperature, upper category temperature; damp heat, long term, 56 days). The tests are carried out in
accordance with IEC 60068-2-xx test method under standard atmospheric conditions according to IEC 60068-1, 5.3.
In the Test Procedures and Requirements table, tests and requirements are listed with reference to the relevant clauses of
IEC 60115-1 and IEC 60068-2-xx test methods.
A short description of the test procedure is also given. In some instances deviations from the IEC recommendations were
necessary for our method of specifying.
PERFORMANCE
IEC
IEC
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
60068-2-xx
TEST
60115-1
TEST
PROCEDURE
CLAUSE
METHOD
Temperature
coefficient
Between
- 55 °C and + 155 °C
4.8
-
250 ppm/K
Pull force in horizontal directions until
the product breakdown
-
Pull test
PR02L
≥ 4 kgf
PR2.5L, PR2.5LS
≥ 2.3 kgf
Robustness of
terminations:
4.16
4.16.2
4.16.3
21 (Ua1)
21 (Ub)
Tensile all samples
Load 10 N; 10 s
Load 5 N; 4 x 90°
No damage
(0.5 ꢀ R + 0.05 Ω)
Bending half number
of samples
Torsion other half
of samples
4.16.4
21 (Uc)
3 x 360° in opposite direction
Document Number: 30258
Revision: 16-Oct-09
For technical questions, contact: filmresistorsleaded@vishay.com
www.vishay.com
47
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明