PT020EB110 [VISHAY]
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT;型号: | PT020EB110 |
厂家: | VISHAY |
描述: | Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT 变压器 晶闸管触发器 |
文件: | 总4页 (文件大小:94K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Models PT-10 and PT-20
www.vishay.com
Vishay Dale
Through-Hole Transformers
Pulse, Trigger Type
FEATURES
• Choice of printed circuit or bobbin-type
configurations
• Designed to transfer high amplitude or long
duration pulses without saturation
• Designed for low-cost trigger source isolation in half and
full wave SCR power control circuits, including motor
speed controls, heater controls and incandescent lighting
controls
• Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PRIMARY
IND. MIN.
(μH)
LEAKAGE
IND. MAX.
(μH)
INTERWINDING
CAPACITYMAX.
(pF)
DASH
NUMBER
TURNS
RATIO
DCR MAX.
UNIPOLAR
ET (V-μs)
FIGURE
()
101 (1)
102 (1)
103 (1)
104
1:1 10 ꢀ
1:1 10 ꢀ
1:1 10 ꢀ
1:1 10 ꢀ
1:1 10 ꢀ
1:1:1 10 ꢀ
1:1:1 10 ꢀ
1:1:1 10 ꢀ
1:1:1 10 ꢀ
1:1:1 10 ꢀ
2:1 10 ꢀ
2:1 10 ꢀ
2:1 10 ꢀ
2:1 10 ꢀ
2:1:1 10 ꢀ
2:1:1 10 ꢀ
2:1:1 10 ꢀ
2:1:1 10 ꢀ
2:1:1 10 ꢀ
5:1 10 ꢀ
5:1:1 10 ꢀ
1/3
1/3
1/3
1/3
1/3
2/4
2/4
2/4
2/4
2/4
1/3
1/3
1/3
1/3
2/4
2/4
2/4
2/4
2/4
1/3
2/4
200
500
3
6
800
1500
2000
2800
3500
800
1.5-1.5
4.5-4.5
8-8
570
912
1000
2000
5000
200
12
13
15
3
1283
1853
2850
570
12-12
18-18
2-2-2
105
106 (1)
107
500
6
1500
2000
2800
3500
1000
1300
1800
2400
700
6-6-6
912
108
1000
2000 (1)
5000
500
12
13
15
6
10-10-10
15-15-15
27-27-27
4-2
1283
1853
2850
912
109
110
111 (1)
112 (1)
113
1000
2000
5000
200
10
12
15
8
10-2
1288
1881
2850
570
10-5
114
18-10
4-2-2
115 (1)
116 (1)
117 (1)
118
500
11
15
60
75
1500
1500
1000
1300
2000
2100
400
6-2-2
912
1000
2000
5000
5000
5000
5-2-2
1311
1881
2850
2850
2850
10-5-5
20-10-10
19-3
119
120 (1)
121
400
20-4-4
Note
(1)
Standard items in PT-10 Model. Other dash numbers available on request. All dash numbers standard in PT-20 model
ELECTRICAL SPECIFICATIONS
Primary Inductance Values: From 200 μH to 5000 μH
Turns Ratio: 1:1, 1:1:1, 2:1, 2:1:1 and 5:1
MATERIAL SPECIFICATIONS
Bobbin: Nylon
Leads: Tinned, solderable
Temperature Range: - 10 °C to + 70 °C
Dielectric Test at 60 Hz: 1600 VRMS (Windings to case)
PT-10 = Polyurethane insulated magnet wire for clip or
bracket mounting
PT-20 = Tinned copper 0.025 [0.635] sq. for printed circuit
mounting
AC Line Voltage at 60 Hz: 240 VRMS maximum in test
circuits shown
Header: Thermoset plastic
Covering: Thermoplastic
Revision: 06-Dec-11
Document Number: 34073
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Models PT-10 and PT-20
www.vishay.com
Vishay Dale
CIRCUIT DIAGRAMS
Load
Load
Line
Line
Transformer Coupled Unijunction Transistor Triggering Circuit
DIMENSIONS in inches (millimeters)
PT-10
Transformer Coupled Breakdown Diode Triggering Circuit
PT-10
0.010 [0.254]
Dia., 6 Leads
0.010 [0.254]
Dia., 4 Leads
0.593 0.062
[15.06 1.57]
Dia.
0.593 0.062
[15.06 1.57]
Dia.
0.828 0.062
[21.03 1.57]
0.828 0.062
[21.03 1.57]
NAT.
NAT.
5
6
4
2
1
2
4
RED
RED
GRN.
RED
GRN.
RED
3
1
GRN.
3
GRN.
1.50 [38.10]
Min.Typ.
1.50 [38.10]
Min.Typ.
GRN.
3
NAT.
5
RED GRN.
RED
1
1
3
PRI.
SEC.
PRI.
SEC.
TER.
4
6
NAT.
2
RED
2
RED
4
GRN.
GRN.
Figure 1
PT-20
Figure 2
PT-20
0.800 [20.32]
Max.
0.800 [20.32]
Max.
0.968 [24.59]
0.968 [24.59]
0.775 [19.68]
Max.
0.775 [19.68]
Max.
Max.
Max.
0.250
[6.35]
Min.
0.250
[6.35]
Min.
2
4
2
4
5
1
6
0.600 [15.24]
0.600 [15.24]
0.300 [7.62]
Ref.
0.300 [7.62]
Ref.
3
1
3
0.250 [6.35]
Ref.
0.250 [6.35]
Ref.
0.025 [0.635]Sq.
4 Leads
0.025 [0.635]Sq
6 Leads
0.500
[12.70]
0.500
[12.70]
1
2
3
3
4
5
1
2
SEC.
PRI.
TER.
PRI.
SEC.
4
6
Figure 3
Figure 4
PART MARKING
- Vishay Dale
- Model
- Style
- Dash number
Revision: 06-Dec-11
Document Number: 34073
2
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Models PT-10 and PT-20
www.vishay.com
Vishay Dale
ORDERING INFORMATION
PT
10
101
EB
e2
MODEL
STYLE
DASH NUMBER
PACKAGE CODE
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
P
T
0
1
0
E
B
1
0
1
MODEL
PACKAGE
CODE
STYLE
DASH NUMBER
Revision: 06-Dec-11
Document Number: 34073
3
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
PT020EB111
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT
VISHAY
PT020EB112
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT
VISHAY
PT020EB113
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT
VISHAY
PT020EB114
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT
VISHAY
PT020EB115
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT
VISHAY
PT020EB116
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT
VISHAY
PT020EB118
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT
VISHAY
PT020EB119
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT
VISHAY
PT020EB120
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR THYRISTOR TRIGGER APPLICATION(S), ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明