PT10104 [VISHAY]
Pulse/Datacom Transformer, PULSE TRANSFORMER FOR GENERAL PURPOSE APPLICATION(S);
| 型号： | PT10104 |
| 厂家： | 
VISHAY |
| 描述： | Pulse/Datacom Transformer, PULSE TRANSFORMER FOR GENERAL PURPOSE APPLICATION(S) |
| 文件： | 总3页 (文件大小：152K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Models PT-10 and PT-20
Vishay Dale
Transformers
Pulse, Trigger Type
FEATURES
• Choice of printed circuit or bobbin-type configurations.
• Designed to transfer high amplitude or long duration
pulses without saturation.
• Designed for low-cost trigger source isolation in half and
full wave SCR power control circuits, including motor
speed controls, heater controls and incandescent
lighting controls.
STANDARD ELECTRICAL SPECIFICATIONS
LEAKAGE
INTERWINDING
CAPACITY
DCR
MAXIMUM
(Ohms)
PRIMARY
INDUCTANCE
INDUCTANCE
DASH
NUMBER
TURNS
RATIO
UNIPOLAR
ET (V-µSEC)
MAXIMUM (µH) MAXIMUM (pF)
MINIMUM (µH)
FIGURE
101*
102*
103*
104
570
912
1:1 ± 10%
1:1 ± 10%
1/3
200
500
3
6
800
1500
2000
2800
3500
800
1.5-1.5
4.5-4.5
8-8
1/3
1/3
1/3
1/3
2/4
2/4
2/4
2/4
2/4
1/3
1/3
1/3
1/3
2/4
2/4
2/4
2/4
2/4
1/3
2/4
1:1 ± 10%
1000
2000
5000
200
12
13
15
3
1283
1853
2850
570
1:1 ± 10%
12-12
18-18
2-2-2
105
1:1 ± 10%
106*
107
1:1:1 ± 10%
1:1:1 ± 10%
1:1:1 ± 10%
1:1:1 ± 10%
1:1:1 ± 10%
2:1 ± 10%
912
500
6
1500
2000
2800
3500
1000
1300
1800
2400
700
6-6-6
108
1283
1853
2850
912
1000
2000*
5000
500
12
13
15
6
10-10-10
15-15-15
27-27-27
4-2
109
110
111*
112*
113
2:1 ± 10%
1000
2000
5000
200
10
12
15
8
10-2
1288
1881
2850
570
2:1 ± 10%
10-5
114
2:1 ± 10%
18-10
4-2-2
115*
116*
117*
118
2:1:1 ± 10%
2:1:1 ± 10%
2:1:1 ± 10%
2:1:1 ± 10%
2:1:1 ± 10%
5:1 ± 10%
500
11
15
60
75
1500
1500
1000
1300
2000
2100
400
6-2-2
912
1311
1881
2850
2850
2850
1000
2000
5000
5000
5000
5-2-2
10-5-5
20-10-10
19-3
119
120*
121
5:1:1 ± 10%
400
20-4-4
*Standard items in PT-10 Model. Other Dash Numbers available on request. All Dash Numbers standard in PT-20 Model.
ELECTRICAL SPECIFICATIONS
MATERIAL SPECIFICATIONS
Bobbin: Nylon.
Leads: Tinned, solderable.
PT-10 = Polyurethane insulated magnet wire for clip or
bracket mounting.
PT-20 = Tinned copper 0.025 [0.635]Sq. for printed circuit
mounting.
Primary Inductance Values: From 200µH to 5000µH.
Turns Ratio: 1:1, 1:1:1, 2:1, 2:1:1 and 5:1.
Temperature Range: - 10°C to + 70°C.
Dielectric Test @ 60 Hz: 1600V RMS (Windings to case).
Header: Thermoset plastic.
Covering: Thermoplastic.
AC Line Voltage @ 60 Hz: 240V RMS maximum in test
circuits shown.
For technical questions, contact: Magnetics@vishay.com
www.vishay.com
2
Document Number: 34073
Revision 11-Dec-02
Models PT-10 and PT-20
Vishay Dale
CIRCUIT DIAGRAMS
Load
Load
Line
Line
Transformer Coupled Unijunction Transistor Triggering Circuit
Transformer Coupled Breakdown Diode Triggering Circuit
DIMENSIONS in inches (millimeters)
PT-10
PT-10
0.010 [0.254]
Dia., 6 Leads
0.010 [0.254]
Dia., 4 Leads
0.593 ± 0.062
[15.06 ± 1.57]
Dia.
0.593 ± 0.062
[15.06 ± 1.57]
Dia.
0.828 ± 0.062
[21.03 ± 1.57]
0.828 ± 0.062
[21.03 ± 1.57]
NAT.
NAT.
5
6
4
2
1
2
4
RED
RED
GRN.
RED
GRN.
RED
3
1
GRN.
3
GRN.
1.50 [38.10]
Min. Typ.
1.50 [38.10]
Min. Typ.
GRN.
3
NAT.
5
RED GRN.
RED
1
1
3
PRI.
SEC.
PRI.
SEC.
TER.
4
6
2
RED
2
RED
4
GRN.
NAT.
GRN.
Figure 1
Figure 2
PT-20
PT-20
0.800 [20.32]
Max.
0.800 [20.32]
Max.
0.968 [24.59]
0.968 [24.59]
0.775 [19.68]
Max.
0.775 [19.68]
Max.
Max.
Max.
0.250
[6.35]
Min.
0.250
[6.35]
Min.
2
4
2
4
5
1
6
0.600 [15.24]
0.600 [15.24]
0.300 [7.62]
Ref.
0.300 [7.62]
Ref.
3
1
3
0.250 [6.35]
Ref.
0.250 [6.35]
Ref.
0.025 [0.635]Sq.
4 Leads
0.025 [0.635]Sq
6 Leads
0.500
[12.70]
0.500
[12.70]
1
2
3
3
4
5
1
SEC.
PRI.
TER.
PRI.
SEC.
4
2
6
Figure 3
Figure 4
PART MARKING
ORDERING INFORMATION
PT
MODEL
10
STYLE
101
— Vishay Dale
— Model
— Style
DASH NUMBER
Contact factory for special designs not listed.
— Dash number
For technical questions, contact: Magnetics@vishay.com
Document Number: 34073
Revision 11-Dec-02
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明