PTN0502E8060BST [VISHAY]
Fixed Resistor, Thin Film, 0.1W, 806ohm, 75V, 0.1% +/-Tol, -25,25ppm/Cel, 0602,;型号: | PTN0502E8060BST |
厂家: | VISHAY |
描述: | Fixed Resistor, Thin Film, 0.1W, 806ohm, 75V, 0.1% +/-Tol, -25,25ppm/Cel, 0602, |
文件: | 总4页 (文件大小:98K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PTN
Vishay Thin Film
Commercial Thin Film Chip Resistors
FEATURES
• Lead (Pb)-free or Sn/Pb terminations available
• Moisture resistant
• High purity alumina substrate
• Non-standard values available
• Will pass + 85 °C, 85 % relative humidity and
10 % rated power
Actual Size
1505
These chip resistors are available in both “top side” and
“wraparound” termination styles in a variety of sizes. They
incorporate self passivated, enhanced Tantalum Nitride
films, to give superior performance on moisture resistance,
voltage coefficient, power handling and resistance stability.
The terminations consist of an adhesion layer, a leach
resistant nickel barrier, and solder coating. This product will
• 100 % visual inspected per MIL-PRF-55342
• Very low noise and voltage coefficient (< - 30 dB)
• Non-inductive
• Laser-trimmed tolerances to 0.1 %
• Wraparound resistance less than 10 mΩ
• Epoxy bondable termination available
• Compliant to RoHS directive 2002/95/EC
out-perform all requirements of characteristic
MIL-PRF-55342.
E
of
CONSTRUCTION
Tantalum Nitride
Resistive Film
TYPICAL PERFORMANCE
Passivation
Solder
Coating
ABS
TCR
TOL
25
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Tantalum nitride
Absolute TCR
Absolute Tolerance
Operating Temperature Range
Noise
25 ppm/°C, 50 ppm/°C, 100 ppm/°C
1.0 %, 0.5 % and 0.1 %
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
< - 30 dB
CASE SIZE
0402
POWER RATING (mW)
MAX. WORKING VOLTAGE
RESISTANCE RANGE (Ω)
20 to 35K
50
100
150
150
200
250
500
400
400
750
800
1000
75
75
0502
20 to 65K
0505
75
20 to 130K
10 to 80K
0603
0805 (1), 0705 (1)
75
100
100
150
200
150
150
200
200
10 to 301K
10 to 301K
50 to 600K
10 to 1M
1005
1010
1206
1505
10 to 1M
2208
10 to 1.75M
10 to 2M
2010
2512
10 to 3M
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 60026
Revision: 02-Nov-09
For technical questions, contact: thin-film@vishay.com
www.vishay.com
55
PTN
Commercial Thin Film Chip Resistors
Vishay Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
L
W
T
D
E
0402
0.042 0.008
0.055 0.006
0.055 0.006
0.064 0.006
0.080 0.006
0.105 0.007
0.105 0.007
0.126 0.008
0.155 0.007
0.209 0.009
0.230 0.007
0.259 0.009
0.022 0.005
0.025 0.005
0.050 0.005
0.032 0.005
0.050 0.005
0.050 0.005
0.100 0.005
0.063 0.005
0.050 0.005
0.098 0.005
0.075 0.005
0.124 0.005
0.012 to 0.033
0.012 to 0.033
0.012 to 0.033
0.020 Max.
0.010 0.005
0.010 0.005
0.010 0.005
0.012 0.005
0.015 0.005
0.015 0.005
0.015 0.005
0.010 0.005
0.015 0.005
0.015 0.005
0.015 0.005
0.015 0.005
0.015 0.005
0.015 0.005
0502
0505
0603
0805 (1), 0705 (1)
1005
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
1010
1206
0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010
1505
0.015 0.005
0.020 0.005
0.020 0.005
0.020 0.005
0.015 0.005
0.020 0.005
0.020 0.005
0.020 0.005
2010
2208
2512
ENVIRONMENTAL TESTS (VISHAY PERFORMANCE VS. MIL-PRF-55342 REQUIREMENTS)
LIMITS MIL-PRF-55342
CHARACTERISTIC “E”
TYPICAL VISHAY
PERFORMANCE
ENVIRONMENTAL TEST
Resistance Temperature Characteristic
Max. Ambient Temp. at Rated Wattage
Max. Ambient Temp. at Power Derating
Thermal Shock
25 ppm/°C
+ 70 °C
+ 150 °C
0.1 %
15 ppm/°C
+ 70 °C
+ 150 °C
ΔR
ΔR
ΔR
ΔR
ΔR
ΔR
ΔR
Ω
0.040 %
Low Temperature Operation
Short Time Overload
0.1 %
Average from Al qual. 0.001 %
PTN Al qual. 0.002 %
0.04 % based on PTN Al termination qual. reports
PTN Al qual. 0.008 %
PTN Al qual. 0.004 %
PTN Al qual. 0.014 %
> 100 000 MΩ
0.10 %
High Temperature Exposure
Resistance to Soldering Heat
Moisture Resistance
0.1 %
0.2 %
0.2 %
Life + 70 °C at 1000 h
0.50 %
Insulation Resistance
10 000 Minimum
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
www.vishay.com
56
For technical questions, contact: thin-film@vishay.com
Document Number: 60026
Revision: 02-Nov-09
PTN
Commercial Thin Film Chip Resistors
Vishay Thin Film
FILM LOAD LIFE STABILITY (at + 125 °C)
DERATING CURVE
0.1 %
100
80
0.06 %
0.05 %
0.04 %
0.03 %
Maximum
Absolute
Change
0.02 %
60
0.01 %
0.006 %
0.005 %
0.004 %
0.003 %
40
20
0.002 %
0.001 %
0
0
70
125
150
200 400 600 800 1000
1200 1400
1800
2000
1600
Time in h at + 125 °C
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PTN1206E1002BBT1 (preferred part number format)
P
T
N
1
2
0
6
E
1
0
0
2
B
B
T
1
GLOBAL
MODEL
CASE
SIZE
TCR
RESISTANCE
TOLERANCE
TERMINATION
PACKAGING
BS = BULK
100 Min 1 Mult
WS = WAFFLE
100 Min 1 Mult
W0 = WAFFLE
100 Min 100 Mult
CHARACTERISTIC
PTN
0402
0502
0505
0603
0805
1005
1010
1206
1505
2208
2010
2512
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
The first 3 digits
are significant
figures and the
last digit specifies
the number of
zeros to follow.
“R” designates
the decimal point.
B = 0.1 %
D = 0.5 %
F = 1 %
G = 2 %
J = 5 %
B = Wraparound
Sn/Pb solder
Min. 60 % Pb
w/nickel barrier
G = Wraparound Au
over Ni (gold)
termination
epoxy bondable
RoHS compliant - e4 T0 = 100 Min 100 Mult
TAPE AND REEL
Example:
S = Wraparound lead
(Pb)-free solder
96.5 % Sn/3.0 %Ag/
0.5 % Cu
T1 = 1000 Min 1000 Mult
10R0 = 10 Ω
1000 = 100 Ω
1001 = 1 kΩ
T3 = 300 Min 300 Mult
T5 = 500 Min 500 Mult
TF = Full Reel
RoHS compliant - e1 TS = 100 Min 1 Mult
Historical Part Number example: PTN0805H8801BBT
PTN
0805
H
8801
B
B
T
TCR
CHARACTERISTIC
STYLE
CASE SIZE
OHMIC VALUE
TOLERANCE
TERMINATION
PACKAGING
Document Number: 60026
Revision: 02-Nov-09
For technical questions, contact: thin-film@vishay.com
www.vishay.com
57
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明