首页 |元器件品牌

RCA060310R0FKEAHP [VISHAY]

RES SMD 10 OHM 1% 1/4W 0603;
RCA060310R0FKEAHP
型号： RCA060310R0FKEAHP
厂家： VISHAY    VISHAY
描述：

RES SMD 10 OHM 1% 1/4W 0603
文件： 总10页 (文件大小：157K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
RCA-HP e3  
Vishay Draloric  
www.vishay.com  
Sulfur Resistant, Pulse Proof, High Power  
Thick Film Chip Resistors  
FEATURES  
• Superior resistance against sulfur containing  
atmosphere, according to ASTM B809-95  
• Excellent pulse load capability  
• Enhanced power rating  
• Double sided printed resistor element  
• AEC-Q200 qualified  
• Material categorization: for definitions of compliance  
please see www.vishay.com/doc?99912  
The sulfur resistant, high power thick film chip resistors  
series combines the capability to stand harsh environment  
operation with high power rating and excellent pulse load  
performance, being the perfect choice for power  
measurement electronics.  
APPLICATIONS  
• Automotive  
• Industrial  
• Commercial  
• High power  
• Harsh environmental  
TECHNICAL SPECIFICATIONS  
RCA0402-HP RCA0603-HP RCA0805-HP RCA1206-HP RCA1210-HP RCA1218-HP RCA2010-HP RCA2512-HP  
DESCRIPTION  
e3  
e3  
e3  
e3  
e3  
e3  
e3  
e3  
Imperial size  
0402  
0603  
0805  
1206  
1210  
1218  
2010  
2512  
Metric size code  
RR1005M  
RR1608M  
RR2012M  
RR3216M  
RR3225M  
RR3246M  
RR5025M  
RR6332M  
Resistance range  
Resistance tolerance  
Temperature coefficient  
1 to 1 M  
5 %; 1 %  
200 ppm/K; 100 ppm/K  
(1)  
Rated dissipation, P70  
0.2 W (2)  
50 V  
0.33 W  
75 V  
0.5 W  
150 V  
0.75 W (3)  
0.75 W  
1.5 W  
200 V  
1.0 W  
400 V  
1.5 W  
500 V  
Operating voltage,  
200 V  
200 V  
Umax. ACRMS/DC  
Permissible film  
temperature, F max.  
155 °C  
(1)  
Operating temperature  
range  
-55 °C to +155 °C  
Max. resistance change  
at P70 for resistance  
range, |R/R| after:  
1000 h  
8000 h  
2.0 %  
4.0 %  
Permissible voltage  
against ambient  
(insulation):  
1 min, Uins  
75 V  
100 V  
200 V  
300 V  
300 V  
300 V  
300 V  
300 V  
Notes  
(1)  
(2)  
(3)  
Please refer to APPLICATION INFORMATION below  
RCA0402-HP resistors feature a single side printed resistive layer only  
Specified power rating requires a thermal resistance of Rth = 110 K/W  
APPLICATION INFORMATION  
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal  
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted  
film temperature is not exceeded.  
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift  
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a  
functional lifetime.  
Revision: 16-Jan-2020  
Document Number: 20067  
1
For technical questions, contact: thickfilmchip@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
RCA-HP e3  
Vishay Draloric  
www.vishay.com  
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE  
TYPE / SIZE  
TCR  
TOLERANCE  
RESISTANCE  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
1 to 1 M  
E-SERIES  
E24  
200 ppm/K  
100 ppm/K  
200 ppm/K  
100 ppm/K  
200 ppm/K  
100 ppm/K  
200 ppm/K  
100 ppm/K  
200 ppm/K  
100 ppm/K  
200 ppm/K  
100 ppm/K  
200 ppm/K  
100 ppm/K  
200 ppm/K  
100 ppm/K  
5 %  
RCA0402-HP e3  
1 %  
E24; E96  
E24  
5 %  
RCA0603-HP e3  
RCA0805-HP e3  
RCA1206-HP e3  
RCA1210-HP e3  
RCA1218-HP e3  
RCA2010-HP e3  
RCA2512-HP e3  
1 %  
E24; E96  
E24  
5 %  
1 %  
E24; E96  
E24  
5 %  
1 %  
E24; E96  
E24  
5 %  
1 %  
E24; E96  
E24  
5 %  
1 %  
E24; E96  
E24  
5 %  
1 %  
E24; E96  
E24  
5 %  
1 %  
E24; E96  
PACKAGING  
PACKAGING  
TYPE / SIZE  
CODE  
QUANTITY  
PACKAGING STYLE  
WIDTH  
PITCH  
DIMENSIONS  
Ø 180 mm / 7"  
Ø 330 mm / 13"  
Ø 180 mm / 7"  
Ø 180 mm / 7"  
Ø 285 mm / 11.25"  
Ø 330 mm / 13"  
Ø 180 mm / 7"  
Ø 285 mm / 11.25"  
Ø 330 mm / 13"  
Ø 180 mm / 7"  
Ø 285 mm / 11.25"  
Ø 330 mm / 13"  
Ø 180 mm / 7"  
Ø 285 mm / 11.25"  
Ø 330 mm / 13"  
Ø 180 mm / 7"  
Ø 285 mm / 11.25"  
Ø 330 mm / 13"  
Ø 180 mm / 7"  
Ø 180 mm / 7"  
ED = ET7  
EE = EF4  
EI = ET2  
10 000  
50 000  
5000  
RCA0402-HP e3  
2 mm  
2 mm  
ED = ET3  
EL = ET4  
EE = ET8  
EA = ET1  
EB = ET5  
EC = ET6  
EA = ET1  
EB = ET5  
EC = ET6  
EA = ET1  
EB = ET5  
EC = ET6  
EA = ET1  
EB = ET5  
EC = ET6  
EK = ET9  
EF = E02  
EG = E67  
EH = E82  
10 000  
20 000  
20 000  
5000  
RCA0603-HP e3  
10 000  
20 000  
5000  
4 mm  
4 mm  
4 mm  
4 mm  
Paper tape acc. to  
IEC 60286-3, type 1a  
8 mm  
RCA0805-HP e3  
RCA1206-HP e3  
RCA1210-HP e3  
10 000  
20 000  
5000  
10 000  
20 000  
5000  
10 000  
20 000  
4000  
RCA1218-HP e3  
RCA2010-HP e3  
4 mm  
4 mm  
8 mm  
4 mm  
4000  
Blister tape acc. to  
IEC 60286-3, type 2a  
12 mm  
2000  
RCA2512-HP e3  
Ø 180 mm / 7"  
4000  
Revision: 16-Jan-2020  
Document Number: 20067  
2
For technical questions, contact: thickfilmchip@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
RCA-HP e3  
Vishay Draloric  
www.vishay.com  
PART NUMBER AND PRODUCT DESCRIPTION  
Part Number: RCA0603562RFKEAHP  
R
C
A
0
6
0
3
5
6
2
R
F
K
E
A
H
P
TYPE / SIZE  
VALUE  
TOLERANCE  
TCR  
PACKAGING  
SPECIAL  
RCA0402  
RCA0603  
RCA0805  
RCA1206  
RCA1210  
RCA1218  
RCA2010  
RCA2512  
R = decimal  
K = thousand  
M = million  
F = 1 %  
J = 5 %  
K = 100 ppm/K  
N = 200 ppm/K  
EA  
EB  
EC  
ED  
EE  
EF  
EG  
EI  
Up to 2 digits  
HP = pulse proof,  
high power  
EH  
EK  
EL  
Product Description: RCA0603-HP 100 562R 1 % ET1 e3  
RCA0603-HP  
100  
562R  
1 %  
ET1  
e3  
TYPE / SIZE  
TCR  
RESISTANCE  
TOLERANCE  
PACKAGING  
LEAD (Pb)-FREE  
RCA0402-HP  
RCA0603-HP  
RCA0805-HP  
RCA1206-HP  
RCA1210-HP  
RCA1218-HP  
RCA2010-HP  
RCA2512-HP  
100 ppm/K  
200 ppm/K  
10R = 10   
562R = 562   
10K = 10 k  
1M = 1 M  
1 %  
5 %  
ET1, ET2, ET3,  
ET4, ET5, ET6,  
ET7, ET8, ET9,  
EF4, E02, E67,  
E82  
e3 = pure tin  
termination finish  
Revision: 16-Jan-2020  
Document Number: 20067  
3
For technical questions, contact: thickfilmchip@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
RCA-HP e3  
Vishay Draloric  
www.vishay.com  
DESCRIPTION  
• The REACH regulation (1907/2006/EC) and the related list  
(4)  
of substances with very high concern (SVHC)  
supply chain  
for its  
Production is strictly controlled and follows an extensive set  
of instructions established for reproducibility. A cermet film  
layer and a glass-over are deposited on both sides of a high  
grade (Al2O3) ceramic substrate with its prepared inner  
contacts on both sides. A special laser is used to achieve  
the target value by smoothly fine trimming the resistive layer  
without damaging the ceramics. A special process is used  
to ensure resistor long term operation in harsh environment  
(sulfur atmosphere). The resistor elements are covered by a  
protective coating designed for electrical, mechanical and  
climatic protection. The terminations receive a final pure tin  
on nickel plating.  
The products do not contain any of the banned  
substances as per IEC 62474, GADSL, or the SVHC list,  
see www.vishay.com/how/leadfree.  
Hence the products fully comply with the following  
directives:  
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and  
Annex II (ELV II)  
• 2011/65/EU Restriction of the Use of Hazardous  
Substances  
2015/863/EU  
Directive  
(RoHS)  
with  
amendment  
The result of the determined production is verified by an  
extensive testing procedure on 100 % of the individual chip  
resistors. Only accepted products are laid directly into the  
tape in accordance with IEC 60286-3 Type 1a and  
• 2012/19/EU Waste Electrical and Electronic Equipment  
Directive (WEEE)  
Vishay pursues the elimination of conflict minerals from its  
supply chain, see the Conflict Minerals Policy at  
www.vishay.com/doc?49037.  
Type 2a (1)  
.
ASSEMBLY  
APPROVALS  
The resistors are suitable for processing on automatic SMD  
assembly systems. They are suitable for automatic  
soldering wave, reflow or vapor phase as shown in  
IEC 61760-1 (1). The encapsulation is resistant to all  
cleaning solvents commonly used in the electronics  
industry, including alcohols, esters and aqueous solutions.  
The suitability of conformal coatings, potting compounds  
and their processes, if applied, shall be qualified by  
appropriate means to ensure the long-term stability of the  
whole system.  
The resistors are qualified according to AEC-Q200.  
Where applicable, the resistors are tested in accordance  
with EN 140401-802 which refers to EN 60115-1,  
EN 60115-8 and the variety of environmental test  
procedures of the IEC 60068 (1) series.  
RELATED PRODUCTS  
For  
more  
information  
about  
products  
for  
non-sulfur-containing environment applications, but with  
superior pulse performance please refer to datasheet:  
D/CRCW-HP e3, Pulse Proof, High Power Thick Film Chip  
Resistors   
The resistors are RoHS-compliant, the pure tin plating  
provides  
compatibility  
with  
lead  
(Pb)-free  
and  
lead-containing soldering processes. Solderability is  
specified for 2 years after production or requalification. The  
permitted storage time is 20 years. The immunity of the  
plating against tin whisker growth has been proven under  
extensive testing.  
www.vishay.com/doc?20043.  
For thick film resistors with standard requirements for power  
rating, please refer to datasheet:  
D/CRCW e3, Standard Thick Film Chip  
www.vishay.com/doc?20035.  
MATERIALS  
Vishay acknowledges the following systems for the  
regulation of hazardous substances:  
For anti-surge products and high power rating, please refer  
to datasheet:  
RCS e3, Anti-Surge High Power Thick Film Chip Resistors   
www.vishay.com/doc?20065.  
• IEC 62474, Material Declaration for Products of and for the  
Electrotechnical Industry, with the list of declarable  
substances given therein (2)  
• The Global Automotive Declarable Substance List  
(GADSL) (3)  
Notes  
(1)  
The quoted IEC standards are also released as EN standards with the same number and identical contents  
(2)  
(3)  
(4)  
The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474  
The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council and available at www.gadsl.org  
The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table  
Revision: 16-Jan-2020  
Document Number: 20067  
4
For technical questions, contact: thickfilmchip@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
RCA-HP e3  
Vishay Draloric  
www.vishay.com  
FUNCTIONAL PERFORMANCE  
PERFORMANCE IN SULFUR-CONTAINING AMBIANCE  
HUMID SULFUR VAPOR TEST  
TEST NAME  
HUMID SULFUR VAPOR TEST  
(Accelerated)  
ASTM B809-95  
accelerated conditions  
Reference specification  
ASTM B809-95  
Test conditions  
(temperature, humidity)  
60 °C 2 °C  
85 % 4 % RH  
90 °C 2 °C  
74 % 7 % RH  
Aggressive agent  
Sulfur (saturated vapor)  
Sulfur (saturated vapor)  
No silver sulfide growth at the interface  
No silver sulfide growth at the interface  
Failure criteria in VI under magnification  
between termination and protective overcoat. between termination and protective overcoat.  
No signs of mechanical damage.  
( 1 % R + 0.05 )  
8000 h  
No signs of mechanical damage.  
( 1 % R + 0.05 )  
1000 h  
Failure criteria in electrical test  
Time before failure  
Single Pulse  
Axis Title  
10 000  
1000  
100  
10  
10000  
RCA2512-HP  
RCA1218-HP  
RCA2010-HP  
RCA1210-HP  
RCA1206-HP  
RCA0805-HP  
RCA0603-HP  
RCA0402-HP  
1000  
100  
10  
1
0.1  
0.01  
0.000001  
0.00001  
0.0001  
0.001  
0.01  
0.1  
1
10  
100  
ti - Pulse Duration (s)  
Maximum pulse load, single pulse; applicable if P 0 and n < 1000 and Û Ûmax.  
;
for permissible resistance change equivalent to 8000 h operation  
Continuous Pulse  
Axis Title  
10 000  
1000  
100  
10  
10000  
1000  
100  
RCA2512-HP  
RCA1218-HP  
RCA2010-HP  
RCA1210-HP  
RCA1206-HP  
RCA0805-HP  
RCA0603-HP  
RCA0402-HP  
1
0.1  
0.01  
0.000001  
10  
0.00001  
0.0001  
0.001  
0.01  
0.1  
1
10  
100  
ti - Pulse Duration (s)  
Maximum pulse load, continuous pulses; applicable if P P (amb) and Û Ûmax.  
;
for permissible resistance change equivalent to 8000 h operation  
Revision: 16-Jan-2020  
Document Number: 20067  
5
For technical questions, contact: thickfilmchip@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
RCA-HP e3  
Vishay Draloric  
www.vishay.com  
Pulse Voltage  
Axis Title  
2000  
10000  
1000  
100  
RCA2512-HP  
1800  
1600  
1400  
1200  
1000  
800  
600  
400  
200  
0
RCA2010-HP  
RCA1206-HP, RCA1210-HP, RCA1218-HP  
RCA0805-HP  
RCA0603-HP  
RCA0402-HP  
10  
10  
0.000001  
0.00001  
0.0001  
0.001  
0.01  
0.1  
1
ti - Pulse Duration (s)  
ˆ
ˆ
Maximum pulse voltage, single and continuous pulses; applicable if P P  
;
max.  
for permissible resistance change equivalent to 8000 h operation  
Derating  
Axis Title  
1.8  
1.6  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0
10000  
1000  
100  
RCA1218-HP, RCA2512-HP  
RCA2010-HP  
RCA1206-HP, RCA1210-HP  
RCA0805-HP  
RCA0603-HP  
RCA0402-HP  
10  
-70 -60 -50 -40 -30 -20 -10  
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160  
ϑamb - Ambient Temperature (°C)  
Revision: 16-Jan-2020  
Document Number: 20067  
6
For technical questions, contact: thickfilmchip@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
RCA-HP e3  
Vishay Draloric  
www.vishay.com  
TESTS AND REQUIREMENTS  
All executed tests are carried out in accordance with the  
following specifications:  
The testing also covers most of the requirements specified  
by EIA/IS-703 and JIS-C-5201-1.  
EN 60115-1, generic specification  
The tests are carried out under standard atmospheric  
conditions in accordance with IEC 60068-1, 4.3, whereupon  
the following values are applied:  
EN 60115-8 (successor of EN 140400), sectional  
specification  
Temperature: 15 °C to 35 °C  
EN 140401-802, detail specification  
IEC 60068-2-xx, test methods  
Relative humidity: 25 % to 75 %  
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).  
The parameters stated in the Test Procedures and  
Requirements table are based on the required tests  
and permitted limits of EN 140401-802. The table presents  
only the most important tests, for the full test schedule refer  
to the documents listed above. However, some additional  
tests and a number of improvements against those  
minimum requirements have been included.  
A climatic category LCT / UCT / 56 is applied, defined by the  
lower category temperature (LCT), the upper category  
temperature (UCT), and the duration of exposure in the  
damp heat, steady state test (56 days).  
The components are mounted for testing on boards in  
accordance with EN 60115-8, 2.4.2 unless otherwise  
specified.  
TEST PROCEDURES AND REQUIREMENTS  
IEC  
EN 60115-160068-2 (1)  
REQUIREMENTS  
PERMISSIBLE CHANGE (R)  
TEST  
PROCEDURE  
CLAUSE  
TEST  
METHOD  
Stability for product types:  
RCA-HP e3  
STABILITY CLASS 2 OR BETTER  
1 to 1 M  
4.5  
4.8  
-
-
Resistance  
-
1 %; 5 %  
Temperature  
coefficient  
(20 / -55 / 20) °C and  
(20 / 155 / 20) °C  
100 ppm/K; 200 ppm/K  
U = P70 x R or U = Umax.;  
whichever is the less severe;  
1.5 h on; 0.5 h off  
4.25.1  
-
Endurance at 70 °C  
70 °C; 1000 h  
70 °C; 8000 h  
(2 % R + 0.1 )  
(4 % R + 0.1 )  
Endurance at  
upper category  
temperature  
4.25.3  
4.24  
-
155 °C, 1000 h  
(2 % R + 0.1 )  
(1 % R + 0.05 )  
(2 % R + 0.1 )  
(40 2) °C; 56 days;  
(93 3) % RH;  
Damp heat,  
steady state  
78 (Cab)  
67 (Cy)  
Damp heat,  
steady state,  
accelerated  
(85 2) °C; (85 5) % RH;  
4.37  
U = 0.1 x P x R 100 V;  
85  
1000 h  
4.23  
-
Climatic sequence:  
dry heat  
-
4.23.2  
2 (Bb)  
125 °C; 16 h  
55 °C; 24 h; 90 % RH;  
4.23.3  
30 (Db)  
damp heat, cyclic  
1 cycle  
4.23.4  
4.23.5  
1 (Ab)  
13 (M)  
cold  
-55 °C; 2 h  
(2 % R + 0.1 )  
low air pressure  
8.5 kPa; 2 h; (25 10) °C  
55 °C; 24 h;  
90 % RH;  
5 cycles  
4.23.6  
30 (Db)  
damp heat, cyclic  
4.23.7  
-
-
DC load  
Cold  
U = P70 x R Umax.; 1 min  
1 (Aa)  
-55 °C; 2 h  
(0.5 % R + 0.05 )  
Revision: 16-Jan-2020  
Document Number: 20067  
7
For technical questions, contact: thickfilmchip@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
RCA-HP e3  
Vishay Draloric  
www.vishay.com  
TEST PROCEDURES AND REQUIREMENTS  
IEC  
EN 60115-160068-2 (1)  
REQUIREMENTS  
PERMISSIBLE CHANGE (R)  
TEST  
PROCEDURE  
CLAUSE  
TEST  
METHOD  
Stability for product types:  
RCA-HP e3  
STABILITY CLASS 2 OR BETTER  
1 to 1 M  
30 min at -55 °C and  
30 min at 125 °C;  
1000 cycles  
Rapid change of  
temperature  
(1 % R + 0.05 )  
4.19  
4.13  
14 (Na)  
-
no visible damage  
U = 2.5 x P70 x R 2 x Umax.;  
whichever is the less severe;  
5 s  
Short time overload  
(2 % R + 0.05 )  
Severity no. 4:  
U = 10 x P70 x R or  
U = 2 x Umax.;  
whichever is the less severe;  
10 pulses 10 μs/700 μs  
Single pulse high  
voltage overload  
(1 % R + 0.05 )  
no visible damage  
4.27  
-
U = 15 x P70 x R or  
U = 2 x Umax.;  
whichever is the less severe;  
0.1 s on; 2.5 s off;  
1000 cycles  
Periodic electric  
overload  
(1 % R + 0.05 )  
4.39  
4.38  
-
-
no visible damage  
Electrostatic  
discharge  
(human body model)  
IEC 61340-3-1 (1)  
;
3 pos. + 3 neg. discharges;  
ESD voltage acc. to the size  
(1 % R + 0.05 )  
Endurance by sweeping;  
10 Hz to 2000 Hz;  
no resonance;  
(0.5 % R + 0.05 )  
no visible damage  
4.22  
6 (Fc)  
Vibration  
amplitude 1.5 mm or  
200 m/s2;  
7.5 h  
Solder bath method;  
Sn60Pb40  
non-activated flux;  
(235 5) °C;  
(2 0.2) s  
Good tinning (95 % covered)  
4.17  
58 (Td)  
Solderability  
no visible damage  
Solder bath method;  
Sn96.5Ag3Cu0.5  
non-activated flux;  
(245 5) °C;  
(3 0.3) s  
Solder bath method  
(260 5) °C;  
Resistance to  
soldering heat  
4.18  
4.29  
58 (Td)  
45 (XA)  
(0.5 % R + 0.05 )  
(10 1) s  
Component solvent  
resistance  
Isopropyl alcohol;  
+50 °C; method 2  
No visible damage  
RCA0402-HP: 9 N  
Shear  
(adhesion)  
4.32  
21 (Uu3)  
No visible damage  
RCA0603-HP to RCA2512-HP:  
17.7 N  
Depth 2 mm;  
3 times  
(0.25 % R + 0.05 )  
4.33  
4.7  
21 (Uu1)  
Substrate bending  
Voltage proof  
no visible damage, no open circuit in bent position  
-
-
U = 1.4 x Uins; 60 s  
No flashover or breakdown  
No burning after 30 s  
IEC 60695-11-5 (1)  
10 s  
;
Flammability,  
needle flame test  
4.35  
Note  
(1)  
The quoted IEC standards are also released as EN standards with the same number and identical contents  
Revision: 16-Jan-2020  
Document Number: 20067  
8
For technical questions, contact: thickfilmchip@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
RCA-HP e3  
Vishay Draloric  
www.vishay.com  
DIMENSIONS  
L
T2  
W
H
T1  
DIMENSIONS AND MASS  
L
W
H
T1  
T2  
MASS  
TYPE / SIZE  
(mm)  
(mm)  
(mm)  
(mm)  
(mm)  
(mg)  
0.65  
2
RCA0402-HP e3  
RCA0603-HP e3  
RCA0805-HP e3  
RCA1206-HP e3  
RCA1210-HP e3  
RCA1218-HP e3  
RCA2010-HP e3  
RCA2512-HP e3  
1.0 0.05  
1.6 0.10  
2.0 0.15  
3.1 0.20  
3.2 0.20  
3.1 0.20  
5.0 0.15  
6.3 0.20  
0.5 0.05  
0.85 0.10  
1.25 0.15  
1.6 0.15  
2.5 0.20  
4.6 0.20  
2.5 0.15  
3.15 0.15  
0.3 0.10  
0.25 0.10  
0.3 0.20  
0.4 0.20  
0.5 0.20  
0.45 0.20  
0.45 0.20  
0.6 0.20  
0.6 0.20  
0.2 0.10  
0.3 0.20  
0.35 0.20  
0.45 0.20  
0.4 0.20  
0.4 0.20  
0.6 0.20  
0.6 0.20  
0.45 0.10  
0.5 0.10  
0.5 0.15  
0.6 0.10  
0.6 0.10  
0.6 0.10  
0.6 0.10  
5.5  
10  
18  
31  
25.5  
42  
SOLDER PAD DIMENSIONS  
X
G
Y
Z
RECOMMENDED SOLDER PAD DIMENSIONS  
WAVE SOLDERING  
TYPE / SIZE  
REFLOW SOLDERING  
G
Y
X
Z
(mm)  
G
(mm)  
Y
X
(mm)  
Z
(mm)  
(mm)  
(mm)  
(mm)  
(mm)  
RCA0402-HP e3  
RCA0603-HP e3  
RCA0805-HP e3  
RCA1206-HP e3  
RCA1210-HP e3  
RCA1218-HP e3  
RCA2010-HP e3  
RCA2512-HP e3  
-
-
-
-
0.45  
0.75  
1.00  
1.50  
1.70  
1.70  
3.70  
5.00  
0.6  
0.6  
1.65  
2.25  
2.90  
3.60  
3.90  
3.90  
6.10  
7.50  
0.65  
0.90  
1.40  
1.80  
1.60  
3.60  
4.90  
1.10  
1.30  
1.40  
1.45  
1.50  
1.65  
1.60  
1.25  
1.60  
1.95  
2.95  
5.10  
2.85  
3.50  
2.85  
3.50  
4.20  
4.70  
4.60  
6.90  
8.10  
0.75  
0.95  
1.05  
1.10  
1.10  
1.20  
1.25  
1.00  
1.45  
1.8  
2.80  
4.90  
2.70  
3.35  
Notes  
•
The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g in standards IEC 61188-5-x (1) or  
in publication IPC-7351.  
Still, the given solder pad dimensions will be found adequate for most general applications  
The quoted IEC standards are also released as EN standards with the same number and identical contents  
(1)  
Revision: 16-Jan-2020  
Document Number: 20067  
9
For technical questions, contact: thickfilmchip@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product  
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in  
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating  
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.  
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited  
to the warranty expressed therein.  
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and  
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of  
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.  
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website  
or for that of subsequent links.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please  
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED  
Revision: 09-Jul-2021  
Document Number: 91000  
1

相关型号：

RCA060311010.5%100ET5E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1100ohm, 75V, 0.5% +/-Tol, -100,100ppm/Cel, 0603,
VISHAY

RCA0603110KFKEA

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 110000ohm, 75V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603, CHIP, ROHS COMPLIANT
VISHAY

RCA060311320.5%100E27E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 11300ohm, 75V, 0.5% +/-Tol, -100,100ppm/Cel, 0603,
VISHAY

RCA060311340.5%50ET6E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1130000ohm, 75V, 0.5% +/-Tol, -50,50ppm/Cel, 0603,
VISHAY

RCA060311341%50ET6E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1130000ohm, 75V, 1% +/-Tol, -50,50ppm/Cel, 0603,
VISHAY

RCA060311541%50ET5E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1150000ohm, 75V, 1% +/-Tol, -50,50ppm/Cel, 0603,
VISHAY

RCA060311830.5%50E27E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 118000ohm, 75V, 0.5% +/-Tol, -50,50ppm/Cel, 0603,
VISHAY

RCA060311840.5%50ET6E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1180000ohm, 75V, 0.5% +/-Tol, -50,50ppm/Cel, 0603,
VISHAY

RCA060312010.5%50ET6E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1200ohm, 75V, 0.5% +/-Tol, -50,50ppm/Cel, 0603,
VISHAY

RCA060312011100E27E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1200ohm, 75V, 1% +/-Tol, -100,100ppm/Cel, 0603,
VISHAY

RCA060312030.5%50ET1E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 120000ohm, 75V, 0.5% +/-Tol, -50,50ppm/Cel, 0603,
VISHAY

RCA060312030.5%50ET6E3

 Fixed Resistor, Metal Glaze/thick Film, 0.1W, 120000ohm, 75V, 0.5% +/-Tol, -50,50ppm/Cel, 0603,
VISHAY
©2020 ICPDF网 联系我们和版权申明