RCWE0603R240JKEA [VISHAY]
RES 0.24 OHM 5% 1/5W 0603;型号: | RCWE0603R240JKEA |
厂家: | VISHAY |
描述: | RES 0.24 OHM 5% 1/5W 0603 |
文件: | 总5页 (文件大小:115K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RCWE
Vishay Dale
www.vishay.com
Thick Film Surface Mount Chip Resistors,
Wraparound, Extremely Low Value (0.01 to 0.976 )
FEATURES
• Extremely low resistance values
(0.01 to 0.976 )
• Sulfur resistant (per ASTM B809-95 humid vapor
test)
• Enhanced power rating due to long side terminal
construction (0612, 1020 types)
• Suitable for current sensing and shunts
• Metal glaze on high quality ceramic
• Protective overglaze
click logo to get started
DESIGN SUPPORT TOOLS
• Lead (Pb)-free solder contacts on Ni barrier layer
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Models
Available
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
TEMPERATURE
COEFFICIENT
ppm/°C
RESISTANCE
RANGE
GLOBAL
MODEL
TOLERANCE
ꢀ
CASE SIZE
P70 °C
E-SERIES (2)
W
400
200
100
700
400
200
100
400
300
200
100
300
200
100
600
300
200
100
500
300
200
100
200
100
600
300
200
100
600
300
200
100
0.033 to 0.05
0.051 to 0.196
0.2 to 0.976
5.0
1.0, 5.0
0.5 (1), 1.0, 5.0
5.0
1.0, 5.0
1.0, 5.0
0.5 (1), 1.0, 5.0
5.0
1.0, 5.0
1.0, 5.0
0.5 (1), 1.0, 5.0
2.0, 5.0
2.0, 5.0
1.0, 5.0
5.0
1.0, 5.0
1.0, 5.0
0.5 (1), 1.0, 5.0
5.0
1.0, 5.0
1.0, 5.0
0.5 (1), 1.0, 5.0
2.0, 5.0
1.0, 5.0
5.0
1.0, 5.0
1.0, 5.0
0.5 (1), 1.0, 5.0
5.0
24
24; 96
24
RCWE0402
0402
0.125
0.2
0.010 to 0.018
0.02 to 0.0324
0.033 to 0.105
0.11 to 0.976
0.010 to 0.018
0.02 to 0.0324
0.033 to 0.05
0.051 to 0.976
0.010 to 0.016
0.018 to 0.2
0.205 to 0.976
0.010 to 0.018
0.02 to 0.0324
0.033 to 0.05
0.051 to 0.976
0.010 to 0.018
0.02 to 0.0324
0.033 to 0.05
0.051 to 0.976
0.010 to 0.016
0.0162 to 0.976
0.010 to 0.018
0.02 to 0.0324
0.033 to 0.05
0.051 to 0.976
0.010 to 0.018
0.02 to 0.0324
0.033 to 0.05
0.051 to 0.976
RCWE0603
0603
24; 96
24
RCWE0805
RCWE0612
RCWE1206
0805
0612
1206
0.25
1.0
24; 96
24
24; 96
24
0.5
24; 96
24
RCWE1210
RCWE1020
RCWE2010
1210
1020
2010
1.0
2.0
1.0
24; 96
24
24; 96
24
24; 96
24
1.0, 5.0
1.0, 5.0
0.5 (1), 1.0, 5.0
RCWE2512
2512
2.0
24; 96
Notes
•
Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
Part marking: Reference “Surface Mount Resistor Marking” (www.vishay.com/doc?20020)
•
(1)
(2)
Tight tolerance of 0.5 % is available for resistance values above 0.300 (0402 size) and above 0.200 (0603 to 2512 sizes)
Use E24 decades only for 5.0 % tolerance. E24 or E96 decades are available for 0.5 % and 1.0 % tolerance. Refer to standard decade table
(www.vishay.com/doc?31001)
Revision: 10-Jan-2019
Document Number: 20019
1
For technical questions, contact: ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWE
Vishay Dale
www.vishay.com
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: RCWE060351L0FNEA (visit www.vishay.net Vishay Dale parts numbering manual for all options)
R
C
W
E
0
6
0
3
5
1
L
0
F
N
E
A
GLOBAL MODEL
(8 digits)
VALUE
(4 digits)
TOLERANCE
(1 digit)
TCR
(1 digit)
PACKAGING
(2 digits)
SPECIAL
(up to 2 digits)
RCWE0402
RCWE0603
RCWE0805
RCWE0612
RCWE1206
RCWE1210
RCWE1020
RCWE2010
RCWE2512
L = m *
D = 0.5 %
F = 1.0 %
G = 2.0 %
J = 5.0 %
K = 100 ppm/°C
N = 200 ppm/°C
M = 300 ppm/°C
Q = 400 ppm/°C
P = 500 ppm/°C
T = 600 ppm/°C
G = 700 ppm/°C
EA = lead (Pb)-free,
(dash number)
from 1 to 99 as
applicable
R = decimal
tape/reel
10L0 = 0.01
R470 = 0.47
Note:
* Use “
L
” for resistance
values < 0.1
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
°C
V
0402
0603
0805
0612
1206
1210
1020
2010
2512
Operating temperature range
Maximum operating voltage
Insulation voltage Uins (1 min)
Insulation resistance
-55 to +155
(P x R)1/2
> 300
V
> 75
0.7
> 100
3
> 200
5.5
> 100
11.5
> 300
17.5
> 300
27.5
> 300
26
> 300
40.5
> 109
Weight/1000 pieces (typical)
g
10.5
DIMENSIONS
RCWE0402 to RCWE2512
RCWE0612, RCWE1020
T2
L
a
H
b
l
l
b
a
W
T1
• 3D models available: www.vishay.com/doc?31106
• Surface mount solder profile recommendations: www.vishay.com/doc?31052
DIMENSIONS in millimeters
SOLDER PAD DIMENSIONS in millimeters
RESISTANCE
SIZE
RANGE
L
W
H
T1
T2
a
b
l
0402
0603
0.033 to 0.976 1.05 0.05 0.55 0.05 0.35 0.1 0.3 0.15 0.25 0.1
0.7
0.9
0.7
1.0
0.8
0.9
1.3
1.2
1.0
1.3
0.9
1.2
2.3
1.4
1.4
0.7
1.0
1.0
1.4
1.4
3.5
1.8
1.8
1.8
2.6
2.6
5.5
3.0
3.0
3.0
0.3
0.4
0.8
0.6
1.0
0.8
1.0
1.2
1.6
1.1
2.0
1.4
1.4
3.2
3.2
0.01 to 0.03
0.033 to 0.976
0.01 to 0.03
0.5 0.2
0.3 0.2
0.6 0.2
0.4 0.2
1.6 0.1
0.85 0.1 0.5 0.1
1.3 0.1 0.55 0.1
0.3 0.2
0805
0612
2.0 0.15
1.6 0.2
0.35 0.2
0.033 to 0.976
0.01 to 0.976
0.01 to 0.03
3.2 0.2
0.6 0.1 0.4 0.15 0.25 0.15
0.9 0.2
1206
0.033 to 0.05 3.1 0.15 1.6 0.15 0.6 0.1
0.8 0.2
0.45 0.2
0.8 0.2
0.4 0.2
0.45 0.2
0.051 to 0.976
0.01 to 0.03
1210
1020
3.1 0.2
2.5 0.2
2.5 0.2
5.0 0.2
0.6 0.1
0.4 0.2
0.033 to 0.976
0.01 to 0.976
0.01 to 0.03
0.6 0.1 0.55 0.15 0.30 0.15
1.6 0.3
2010
0.033 to 0.05
0.051 to 0.976
5.0 0.2
2.5 0.15 0.6 0.1
0.7 0.3
0.7 0.3
0.6 0.2
Revision: 10-Jan-2019
Document Number: 20019
2
For technical questions, contact: ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWE
Vishay Dale
www.vishay.com
DIMENSIONS
RCWE0402 to RCWE2512
RCWE0612, RCWE1020
T2
L
a
H
b
l
l
b
a
W
T1
• 3D models available: www.vishay.com/doc?31106
• Surface mount solder profile recommendations: www.vishay.com/doc?31052
DIMENSIONS in millimeters
SOLDER PAD DIMENSIONS in millimeters
RESISTANCE
SIZE
RANGE
L
W
H
T1
T2
a
b
l
0.01 to 0.03
0.033 to 0.05
0.051 to 0.976
2.0 0.3
0.8 0.3
0.8 0.3
2.8
1.6
1.6
3.6
3.6
3.6
1.4
3.8
3.8
2512
6.3 0.2 3.15 0.15 0.6 0.1
0.6 0.2
DERATING
120
100
80
60
40
20
0
-55
-25
0
25
75
100
125
155
175
Ambient Temperature in °C
70
SINGLE PULSE
Axis Title
10 000
10000
1000
100
10000
Tested using a square wave pulse according to
EN60115-1. Max. pulse voltage defined by EN140401-802;
Upeak = Umax. + 2.5 Umax./(1 + 100 t). Failure defined
by visible damage or change > 1 % + 0.5 mΩ.
1020
2010
1000
100
10
1000
1206
2512
1210
100
1
0.1
0.000001
10
0.00001
0.0001
0.001
0.01
0.1
1
10
100
Time in s
Revision: 10-Jan-2019
Document Number: 20019
3
For technical questions, contact: ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWE
Vishay Dale
www.vishay.com
SINGLE PULSE
Axis Title
10 000
1000
100
10
10000
Tested using a square wave pulse according to
EN60115-1. Max. pulse voltage defined by EN140401-802;
Upeak = Umax. + 2.5 Umax./(1 + 100 t). Failure defined
by visible damage or change > 1 % + 0.5 mΩ.
1000
100
10
0612
0805
0603
0402
1
0.1
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
Time in s
PERFORMANCE
TEST
CONDITIONS OF TEST
TEST LIMITS
Thermal shock
MIL-STD-202, method 107, -55 °C to +125 °C, 300 cycles at each extreme
1.0 % + 0.0005
2x rated power; size and duration - 0402: 0.5 s, 0603 and 0805: 1 s,
1206 and larger: 2 s
Short time overload
0.5 % + 0.0005
High temperature exposure
Temperature cycling
Biased humidity
Mechanical shock
Vibration
MIL-STD-202, method 108, 1000 h at T = 125 °C, 0 % power
JESD 22, method JA-104, 1000 cycles (-55 °C to +125 °C)
2.0 % + 0.0005
2.0 % + 0.0005
2.0 % + 0.0005
1.0 % + 0.0005
1.0 % + 0.0005
2.0 % + 0.0005
MIL-STD-202, method 103, 1000 h 85 °C/85 % RH, 10 % x (P x R)1/2
MIL-STD-202, method 213, condition C, 10 g’s, 6 ms (half sine), 3 directions
MIL-STD-202, method 204, 5 g’s, 20 min, 12 cycles, 3 directions, 10 Hz to 2000 Hz
Operational life
MIL-STD-202, method 108, 1000 h at T = 125 °C at rated power
MIL-STD-202, method 210, +260 °C solder, 10 s to 12 s dwell, 25 mm/s
emergence
Resistance to solder heat
Moisture resistance
1.0 % + 0.0005
2.0 % + 0.0005
MIL-STD-202, method 106, 0 % power, 7a and 7b not required
PACKAGING
REEL
MODEL
TAPE WIDTH
DIAMETER
180 mm/7"
180 mm/7"
180 mm/7"
180 mm/7"
180 mm/7"
180 mm/7"
180 mm/7"
180 mm/7"
180 mm/7"
PITCH
2 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
8 mm
PIECES/REEL
10 000
5000
CODE
EA
RCWE0402
RCWE0603
RCWE0805
RCWE0612
RCWE1206
RCWE1210
RCWE1020
RCWE2010
RCWE2512
8 mm/punched paper
8 mm/punched paper
8 mm/punched paper
8 mm/punched paper
8 mm/punched paper
8 mm/punched paper
12 mm/embossed plastic
12 mm/embossed plastic
12 mm/embossed plastic
EA
5000
EA
5000
EA
5000
EA
5000
EA
4000
EA
4000
EA
2000
EA
Notes
•
•
Embossed carrier tape per EIA-481-1A
Additional packaging details at: www.vishay.com/doc?31543
Revision: 10-Jan-2019
Document Number: 20019
4
For technical questions, contact: ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明