REC10LH4A152W [VISHAY]
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder;
| 型号： | REC10LH4A152W |
| 厂家： | 
VISHAY |
| 描述： | Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder |
| 文件： | 总3页 (文件大小：277K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Series REC 10 LH
www.vishay.com
Vishay Sfernice
Precision Linear Transducers,
Designed for Mounting in Hydraulic or Pneumatic Cylinder,
Conductive Plastic Element (Unsealed Series/Ø 10 mm)
FEATURES
• Large range of strokes from 25 mm to 500 mm
• High accuracy
• Very good repeatability
• Continuous resolution
• Easy mounting
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
These unsealed sensors are suitable for installation in the
high pressure chamber of cylinders.
QUICK REFERENCE DATA
Sensor type
LINEAR, conductive plastic
Output type
Wires
Market appliance
Dimensions
Industrial
10 mm dia.
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET) = E
From 25 mm to 500 mm in increments of 25 mm
1 ꢀ% 0.1 ꢀ
Independent linearity (over TET)
on request
0.05 ꢀ if E 100 mm
0.025 ꢀ if E 200 mm
Actual electrical travel (AET)
Total resistance RT
Resistance tolerance at 20 °C
Repeatability
TET + 6 mm 0.5
150 /cm
20 ꢀ
0.01 ꢀ
Maximum power rating
Wiper current
0.05 W/cm at 70 °C, 0 W at 125 °C
1 mA max. continuous, recommended: a few μA
1000 times RT minimum
Load impedance
Insulation resistance
Dielectric strength
> 1000 M, 500 VDC
> 300 VRMS at 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical travel (MT)
MT = TET
Anodized aluminum
Body
Rod internal diameter
Operating force
Electrical outputs
Oil
10 LH: Ø 12 mm
1 N typical
Wires, L = 300 mm
Insulating mineral hydraulic
300 bars continuous, 1000 bars accidentally
Precious metal multifinger
Pressure
Wiper
PERFORMANCE
Life
25 million cycles typical/1 Hz/T° = 20 °C 5 °C/80 ꢀ TET
Temperature Limits
Speed at 20 °C
-20 °C to +80 °C
1.5 m/s max.
Note
Nothing stated herein shall be construed as a guarantee of quality or durability.
•
Revision: 26-Mar-15
Document Number: 54020
1
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 10 LH
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance 1 mm
19.9
18.5
AET = TET + 6 1.5
MT = E
4.5
G VIEW
- 0.1
- 0.2
GREEN WIRE
Ø 12
RED WIRE
RESISTIVE TRACK
YELLOW WIRE
L = E + 51 MAX.
15.3
1.7
7
15.3 + 0.1
- 0.1
A
13.8 + 0.1
- 0.1
A
+ 0.2
Ø 19
- 0
+ 0.3
+ 0.1
Ø 12
+ 0.2
- 0
Ø 18
+ 0.1
- 0
1.1
MOUNTING IN ACTUATOR
ELECTRICAL CONNECTIONS
GREEN WIRE : +
RED WIRE: WIPER
YELLOW WIRE: -
TET
AET
TET = THEARETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
ORDERING INFORMATION/DESCRIPTION
REC
10
LH
4
D
152
W...
e.
SERIES
MODEL
TYPE
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
RESISTANCE
MODIFICATIONS
LEAD FINISH
Unsealed
Times 25 mm
A: 1 ꢀ
First 2 digits are
significantnumbers
third indicates
Special feature
code number
D: 0.1 ꢀ
E: 0.05 ꢀ
F: 0.025 ꢀ
number of zeros
SAP PART NUMBERING GUIDELINES
RE
10 LH
4
D
152
W...
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 26-Mar-15
Document Number: 54020
2
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
REC10LH4D152W
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder
VISHAY
REC10LH4E152W
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder
VISHAY
REC10LH4F152W
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder
VISHAY
REC110L3A102
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC
VISHAY
REC110L3A103
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC, 1%, RECTANGULAR, ROHS COMPLIANT PACKAGE
VISHAY
REC110L3D102
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC
VISHAY
©2020 ICPDF网 联系我们和版权申明