REC16LA [VISHAY]
Precision Linear Transducers, Designed;型号: | REC16LA |
厂家: | VISHAY |
描述: | Precision Linear Transducers, Designed |
文件: | 总4页 (文件大小:389K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series REC 16 LA
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Designed for Mounting in Hydraulic
or Pneumatic Cylinder, Conductive Plastic Element
(Sealed Series/Ø 16 mm)
FEATURES
• Large range of strokes from 25 mm to 2000 mm
• High accuracy
• Very good repeatability
• Continuous resolution
• Easy mounting
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
LINEAR, conductive plastic
Those sensors are to be installed in the high pressure
chamber of cylinders and are equipped with glass-sealed
electrical outputs.
Output type
Wires
Industrial
Market appliance
Dimensions
L x 16 mm dia. (with L = TET + 77 mm)
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET = E)
Independent linearity over TET
From 25 mm to 2000 mm in increments of 25 mm
1 ꢀ% 0.1 ꢀ
On request
0.05 ꢀ if E 100 mm, 0.025 ꢀ if E 200 mm
Actual electrical travel (AET)
Total resistance RT
Resistance tolerance at 20 °C
Repeatability
TET + 6 mm 0.5
150 /cm
20 ꢀ
0.01 ꢀ
Maximum power rating
Wiper current
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few μA - 1 mA max. (continuous)
1000 times RT minimum
Load impedance
Insulation resistance
Dielectric strength
> 1000 M 500 VDC
> 300 VRMS at 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical travel MT
MT = TET
Anodized aluminum
16 LA: Ø 18 mm
Body
Rod internal diameter
Support
Stainless steel
Operating force
Sealing
1 N typical
Glass-sealing on electrical outputs
Electrical outputs
On request
Connector
Wires
Oil
Insulating mineral hydraulic
300 bars continuous, 1000 bars accidentally
Precious metal multifinger
Pressure
Wiper
PERFORMANCE
Life
25 million cycles typical/1 Hz/T° = 20 °C 5 °C/80 ꢀ TET
Temperature limits
Speed at 20 °C
-20 °C to +80 °C
1.5 m/s max.
Note
Nothing stated herein shall be construed as a guarantee of quality or durability.
•
Revision: 26-Mar-15
Document Number: 54018
1
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 16 LA
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance 1 mm
L = TET + 77
AET = TET + 6
55 MAX.
O. RING
53
+ 0
- 0.2
Ø A
CONNECTOR
Ø 20
Ø 36
+ 0
+ 0
Ø 24
- 0.2
- 0.05
Ø A
7
8.5
18
17
MT = TET
3
+ 0.2
- 0.2
+ 0.4
+ 0.1
Ø C
Ø D
+ 0.6
+ 0.1
+ 0.2
- 0
Ø D
Ø B
MODEL
+ 0.1
- 0
E
A
B
C
D
E
F
G
+ 0.1
DIMENSIONS
16 LA
G
- 0.1
+ 1
F
18
25.2
24
18
1.3
17.8
16.3
- 0
ELECTRICAL CONNECTIONS
PIN 3 OR GREEN WIRE: +
PIN 2 OR RED WIRE: WIPER
PIN 1 OR YELLOW WIRE: -
TET
AET
TET = Theoretical electrical travel
AET = Actual electrical travel
MOUNTING IN ACTUATOR
Revision: 26-Mar-15
Document Number: 54018
2
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 16 LA
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance 1 mm
OTHER DESIGNS OF SUPPORT
...W04200
50
13
12
15
12
Ø 32
Ø 25
+ 0.02
- 0
Ø 31.7
Ø 50 MAX.
M 42 x 1.5
...W04707
...W04700
47 MAX.
23
23
O. RING +
BACK-UP RING
2
- 0.007
- 0.02
Ø 23
- 0.05
- 0.1
Ø 18.9
f7
Ø 23
- 0.02
- 0.041
Ø 23
- 0.05 Ø 18
Ø 23 - 0.1
Ø 18.4
Ø 23
- 0.05
- 0.1
2.25
4
5
4
4
11
5
8
ORDERING INFORMATION/DESCRIPTION
REC
16
LA
4
D
152
W...
e.
SERIES
MODEL
TYPE
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
RESISTANCE
MODIFICATIONS
LEAD FINISH
Sealed
Times 25 mm
A: 1 ꢀ
First 2 digits are
significant
Special feature
code number
D: 0.1 ꢀ
E: 0.05 ꢀ
F: 0.025 ꢀ
numbers
3rd indicates
number of zeros
SAP PART NUMBERING GUIDELINES
RE
16 LA
4
D
152
W....
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 26-Mar-15
Document Number: 54018
3
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
REC16LA4A152
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC, 25-2000mm, ROHS COMPLIANT PACKAGE
VISHAY
REC16LA4E152
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC, 25-2000mm, ROHS COMPLIANT PACKAGE
VISHAY
REC16LA4F152
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC, 25-2000mm, ROHS COMPLIANT PACKAGE
VISHAY
REC16LH4A152
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC, 25-2000mm, ROHS COMPLIANT PACKAGE
VISHAY
REC16LH4A152W
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element (REC)
VISHAY
REC16LH4D152
Position, Linear, Potentiometric Sensor, POSITION, LINEAR SENSOR-CONDUCTIVE PLASTIC, 25-2000mm, ROHS COMPLIANT PACKAGE
VISHAY
REC16LH4D152W
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element (REC)
VISHAY
©2020 ICPDF网 联系我们和版权申明