RLR05C2202GRBSL [VISHAY]

RES 22K OHM 2% 1/8W AXIAL;


型号：	RLR05C2202GRBSL
厂家：	VISHAY
描述：	RES 22K OHM 2% 1/8W AXIAL
文件：	总4页 (文件大小：143K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

ERL (Military RLR)

www.vishay.com

Vishay Dale

Metal Film Resistors, Axial, Military / Established Reliability,

MIL-PRF-39017 Qualified, Type RLR

FEATURES

• Meets requirements of MIL-PRF-39017

• Failure rate: Verified failure rate (contact factory for current

level)

• Epoxy coated construction provides superior moisture

protection

• Traceability of materials and processing

• Monthly lot acceptance testing

• Very low noise (-40 dB)

• Extensive stocking program at distributors and factory in

1 ꢀ and 2 ꢀ tolerances

• Vishay Dale has complete capability to develop specific

reliability programs designed to customer requirements

STANDARD ELECTRICAL SPECIFICATIONS

POWER

RATING

70 °C

MAXIMUM

WORKING

VOLTAGE ⁽⁴⁾

VISHAY

DALE

MODEL



MIL

SPEC.

SHEET

RESISTANCE

RANGE ⁽¹⁾



TEMPERATURE

COEFFICIENT

ppm/°C

LIFE

MIL-PRF-39017

STYLE

TOLERANCE

ꢀ



FAILURE

RATE ⁽²⁾

4.7 to 100K

101K to 1M

1 to 9.76

10 to 3.01M

3.02M to 10M

M, P, R, S

M, P, R

M, P, R, S

M, P, R

ERL05,

RLR05

RLR07

0.125

1, 2

100

200

ERL05..19 ⁽³⁾

ERL07,

0.25

250

ERL07..23 ⁽³⁾

ERL20,

RLR20

RLR32

0.50

1.0

4.3 to 3.01M

1 to 2.7M

1, 2

100

350

500

M, P, R, S

M, P, R

ERL20..11 ⁽³⁾

ERL32,

ERL32..1 ⁽³⁾

Notes

(1)

Extended resistance range: DSCC has created a series of drawings intended to support extended resistance ranges left otherwise void by 

the discontinuation of MIL-R-39008 RCR carbon composition resistors. Vishay Dale is listed as a resource on these drawings as follows:

MAXIMUM

DSCC

DRAWING

NUMBER

POWER RATING RESISTANCE

TEMPERATURE

COEFFICIENT

ppm/°C

VISHAY DALE

MODEL

TOLERANCE

ꢀ

WORKING

VOLTAGE

V ⁽⁴⁾

P_{70 °C}

RANGE



98020

99011

98021

98022

ERL05..36, ERL05..37 ⁽³⁾

ERL07..100, ERL07..101 ⁽³⁾

ERL20..36, ERL20..37 ⁽³⁾

ERL32..36, ERL32..37 ⁽³⁾

0.125

0.25

0.50

1.0

1.1M to 22M

11M to 22M

3.3M to 22M

3M to 22M

2, 5, 10

350

200

250

350

10 to 2.7M

3M to 22M

100

350

97004

ERL62..1, ERL62..2 ⁽³⁾

2.0

1, 2, 5, 10

500

•

Low inductance: DSCC has created a drawing intended to support a resistor which exhibits low inductance over a frequency range of 1 MHz

to 30 MHz. Vishay Dale is listed as a resource on these drawings as follows:

POWER

RATING

P_{70 °C}

MAXIMUM

WORKING

VOLTAGE

V ⁽⁴⁾

DSCC

DRAWING

NUMBER

RESISTANCE

RANGE



MAXIMUM

TEMPERATURE

COEFFICIENT

ppm/°C

VISHAY DALE

MODEL

TOLERANCE

ꢀ

INDUCTANCE

1 to 10

11 to 49.9

96002

ERL07..62

0.25

1, 2

100

250

These drawings can be viewed at: http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg

(2)

(3)

(4)

Consult factory for current QPL failure rates

Hot solder dipped leads

Continuous working voltage shall be P x R or maximum working voltage, whichever is less.

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

ppm/V

V_AC



°C

CONDITION

5/V when measured between 10 ꢀ and full rated voltage

RLR05 = 300; RLR07 and RLR20 = 500; RLR32 = 1000

 10⁹min. dry;  10¹¹min. after moisture test

Voltage Coefficient, max.

Dielectric Strength

Insulations Resistance

Operating Temperature Range

Terminal Strength

Solderability

-65 to +150

2 lb pull test on RLR05; 5 lb pull test on all other sizes

Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208

RLR05 = 0.11; RLR07 = 0.35; RLR20 = 0.75; RLR32 = 1.05

Weight

Revision: 13-Oct-2020

Document Number: 31023

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ERL (Military RLR)

www.vishay.com

Vishay Dale

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: RLR07C3001FRR36 (preferred part numbering format)

RESISTANCE TOLERANCE

FAILURE

RATE

MIL STYLE

LEAD MATERIAL

PACKAGING

SPECIAL

VALUE

CODE

RLR05

RLR07

RLR20

RLR32

C = solderable /

3 digit

significant

F = 1 ꢀ

G = 2 ꢀ

M = 1.0 ꢀ/1000 h

P = 0.1 ꢀ/1000 h

R = 0.01 ꢀ/1000 h

S = 0.001 ꢀ/1000 h

B14 = tin / lead, bulk Blank = standard

weldable

BSL = tin / lead, bulk,

single lot date code

R36 = tin/lead,

(dash number)

(up to 3 digits)

From 1 to 999

as applicable

1 = hot solder

dip (32’s)

figure,

followed by

a multiplier

Use “R” for

values < 100 

1R00 = 1 

3302 = 33 k

1005 = 10 M

T/R (full, except 32’s)

R64 = tin / lead,

T/R (full; 32’s only)

RE6 = tin / lead,

T/R (1000 pieces)

RSL = tin / lead, T/R,

single lot date code

11 = hot solder

dip (20’s)

19 = hot solder

dip (05’s)

23 = hot solder

dip (07’s)

Historical Part Number Example: RLR07C3001FR (will continue to be accepted)

RLR07

3001

R36

MIL STYLE

LEAD MATERIAL

RESISTANCE VALUE

TOLERANCE CODE

FAILURE RATE

PACKAGING

Note

For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544)

•

DIMENSIONS in inches (millimeters)

E ⁽¹⁾

(Max.)

Note

(1)

Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape

spacing and lead trim

VISHAY DALE MODEL

C (Max.)

0.150 0.020

(3.81 0.51)

0.066 0.008

(1.68 0.21)

0.187

(4.75)

0.016 0.002

(0.41 0.05)

1.25 0.266

(31.75 6.76)

ERL05

0.250 + 0.031 - 0.046

(6.35 + 0.79 - 1.17)

0.090 0.008

(2.29 0.21)

0.138 0.023

(3.51 0.58)

0.190 0.015

(4.83 0.38)

0.230 0.015

(5.84 0.38)

0.300

(7.62)

0.450

(11.43)

0.625

(15.87)

0.650

(16.51)

0.025 0.002

(0.64 0.05)

0.032 0.002

(0.81 0.05)

1.50 0.125

(38.10 3.18)

1.50 0.125

(38.10 3.18)

1.50 0.125

(38.10 3.18)

1.50 0.125

(38.10 3.18)

ERL07

ERL20

ERL32

ERL62

0.375 0.041

(9.53 1.04)

0.562 0.031

(14.27 0.79)

0.032 + 0.002 - 0.001

(0.81 + 0.05 - 0.03)

0.032 + 0.002 - 0.001

(0.81 + 0.05 - 0.03)

0.562 + 0.031 - 0.042

(14.27 + 0.79 - 1.07)

APPLICABLE MIL-SPECIFICATIONS

MATERIAL SPECIFICATIONS

MIL-PRF-39017:

Element

Vacuum-deposited nickel-chrome alloy

The ERL series meets the electrical, environmental and

Core

Fire-cleaned high purity ceramic

dimensional requirements of MIL-PRF-39017.

Encapsulation

Specially formulated epoxy compound

MIL-PRF-22684:

Standard lead material is solder-coated

copper. Solderable and weldable per

MIL-STD-1276, Type C.

MIL-PRF-39017 supercedes MIL-PRF-22684 on new

designs. The ERL series meet or exceed MIL-PRF-22684

requirements.

Termination

Documentation:

POWER RATING

Qualification and failure rate verification test data is

maintained by Vishay Dale and is available upon request.

Lot traceability and identification data is maintained by

Vishay Dale for five years.

Power ratings are based on the following two conditions:

1. 2.0 ꢀ maximum R in 2000 h load life

2. +150 °C maximum operating temperature

CAGE CODE: 91637

Revision: 13-Oct-2020

Document Number: 31023

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ERL (Military RLR)

www.vishay.com

Vishay Dale

120

100

120

100

ERL05

ERL07

ERL20

ERL32

- 65

- 25

150

AMBIENT TEMPERATURE IN °C

- 50

75 100 125

175

200

0.125 0.25 0.375 0.5 0.625 0.75 0.875

1.125

APPLIED POWER IN W

DERATING

THERMAL RESISTANCE

MARKING (per MIL-PRF-39017)

Tolerance: F = 1 ꢀ, G = 2 ꢀ

Value = three significant figures and multiplier

J = JAN (Joint Army - Navy) brand

RLR05: (3 lines)

RLR07: (4 lines)

210A

1002

FSJD

3-digit date code and lot code

214AJ

RLR7C

1300G

3-digit date code, lot code and JAN

Style (“0” omitted) and lead material

Value and tolerance

Value

Tolerance, failure rate, JAN and manufacturer’s code

Failure rate and manufacturer’s code

RLR20, RLR32: (4 lines)

91637

RLR20C

4993FR

1225AJ

CAGE code

Style and lead material

Value, tolerance and failure rate

4-digit date code, lot code and JAN

Revision: 13-Oct-2020

Document Number: 31023

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

RLR05C2202GRBSL [VISHAY]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB