RN55D3140FRSL [VISHAY]
RESISTOR, METAL FILM, 0.125 W, 1 %, 100 ppm, 314 ohm, THROUGH HOLE MOUNT, AXIAL LEADED;型号: | RN55D3140FRSL |
厂家: | VISHAY |
描述: | RESISTOR, METAL FILM, 0.125 W, 1 %, 100 ppm, 314 ohm, THROUGH HOLE MOUNT, AXIAL LEADED |
文件: | 总5页 (文件大小:152K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CMF (Military RN and RL)
Vishay Dale
Metal Film Resistors, Military, MIL-R-10509 Qualified,
Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
FEATURES
• Very low noise (- 40 dB)
• Very low voltage coefficient (5 ppm/V)
• Controlled temperature coefficient
• Flame retardant epoxy coating
• Commercial alternatives to military styles are available
with higher power ratings. See appropriate catalog or web
page.
STANDARD ELECTRICAL SPECIFICATIONS
POWER
RATING
RESISTANCE RANGE
Ω
MAX.
VISHAY
DALE
MODEL
MIL
SPEC.
SHEET
DIELECTRIC
STRENGTH
VAC
MIL
STYLE
TOLERANCE WORKING
MIL-R-10509
MIL-
PRF-
22684
ꢀ
VOLTAGE (1)
V
P70 °C P125 °C
100 ppm/°C
(D)
50 ppm/°C
(C)
25 ppm/°C
W
W
(E)
0.1, 0.25,
0.5, 1
CMF50 RN50
CMF55 RN55
CMF60 RN60
CMF65 RN65
CMF70 RN70
CMF07 RL07
CMF20 RL20
08
07
01
02
03
01
02
-
0.05
200
200
300
350
500
250
350
-
10 to 100K
10 to 100K
-
-
-
-
-
450
450
500
900
900
450
700
0.1, 0.25,
0.5, 1
0.125 0.10
0.25 0.125
10 to 301K 49.9 to 100K 49.9 to 100K
0.1, 0.25,
0.5, 1
10 to 1M
49.9 to 499K 49.9 to 499K
0.1, 0.25,
0.5, 1
0.50
0.25
10 to 2M
49.9 to 1M
49.9 to 1M
0.1, 0.25,
0.5, 1
0.75 (2) 0.50
10 to 2.49M
24.9 to 1M
24.9 to 1M
51 to
150K
0.25
0.50
-
-
2, 5
2, 5
-
-
-
-
-
-
4.3 to
470K
Notes
(1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less.
(2) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 Rev. D.
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
ppm/V
Ω
CONDITION
Voltage Coefficient
Insulation Resistance
Operating Temperature Range
Terminal Strength
5 when measured between 10 % and full rated voltage
≥ 1010 min. dry; ≥ 108 min. after moisture test
°C
- 65/+ 175 (see derating curves for military range)
5 pound pull test for RL07/RL20; 2 pound pull test for all others
Ib
Continuous satisfactory coverage when tested in accordance
with MIL-R-10509 and MIL-PRF-22684
Solderability
www.vishay.com
48
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31027
Revision: 11-Mar-10
CMF (Military RN and RL)
Metal Film Resistors, Military, MIL-R-10509 Qualified,
Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RN60D3483FR36 (preferred part numbering format)
R
N
6
0
D
3
4
8
3
F
R
3
6
RESISTANCE
VALUE
TOLERANCE
CODE
MIL STYLE
CHARACTERISTIC
PACKAGING
SPECIAL
RN50
RN55
RN60
RN65
RN70
E= 25 ppm
C = 50 ppm
= 100 ppm
3 digit significant
figure, followed by
a multiplier
Use “R” for
values < 100 Ω
10R0 = 10 Ω
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1 %
Blank = Standard
(Dash number)
B14 = Tin/lead, bulk
BSL = Tin/lead, bulk,
single lot date code
D
R36 = Tin/lead, T/R (full)
RE6 = Tin/lead, T/R (1000 pieces)
RSL = Tin/lead, T/R,
2152 = 21.5 kΩ
2494 = 2.49 MΩ
single lot date code
Historical Part Number example: RN60D3483F (will continue to be accepted)
RN60
D
3483
F
R36
MIL STYLE
CHARACTERISTIC
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
New Global Part Numbering: RL07S471JR36 (preferred part numbering format)
R
L
0
7
S
4
7
1
J
R
3
6
RESISTANCE
VALUE
2 digit significant
figure, followed by
a multiplier
TOLERANCE
CODE
G = 2 %
J = 5 %
MIL STYLE
LEAD MATERIAL
PACKAGING
B14 = Tin/lead, bulk
BSL = Tin/lead, bulk, single lot date code
R36 = Tin/lead, T/R (full)
RE6 = Tin/lead, T/R (1000 pieces)
RSL = Tin/lead, T/R, single lot date code
RL07
RL20
S = Solderable
Use “R” for
values < 10 Ω
4R3 = 4.3 Ω
202 = 2.0 kΩ
474 = 470 kΩ
Historical Part Number example: RL07S471J (will continue to be accepted)
RL07
S
471
J
R36
MIL STYLE
LEAD MATERIAL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
MATERIAL SPECIFICATIONS
CAGE CODE: 91637
Element
Coating
Core
Nickel-chrome alloy
Flame retardant epoxy, formulated for
superior moisture protection
Fire-cleaned high purity ceramic
Standard lead material is solder-coated
copper. Solderable and weldable.
ENVIRONMENTAL SPECIFICATIONS
Termination
Environmental performance is shown in the
Environmental Performance table. Test
methods are those specified in MIL-R-10509
General
APPLICABLE MIL-SPECS
MIL-R-10509 and MIL-PRF-22684: The CMF models meet or
exceed the electrical, environmental and dimensional requirements
of MIL-R-10509 and MIL-PRF-22684.
and MIL-PRF-22684.
Resistance shifts due to storage at room
Shelf Life
temperature are negligible.
Noise: Vishay Dale metal film resistors have exceptionally low
noise level. Average for standard resistance range is 0.10 µV per V
over a decade of frequency, with low and intermediate resistance
values typically below 0.05 µV per V.
Document Number: 31027
Revision: 11-Mar-10
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
49
CMF (Military RN and RL)
Metal Film Resistors, Military, MIL-R-10509 Qualified,
Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
Vishay Dale
Vishay Dale CMF resistors have an operating temperature range of - 65 °C to + 175 °C. They must be derated according to the
following curves:
120
100
MIL-R-10509
Char. C and E Rating
MIL-R-10509
Char. D Rating
80
60
40
20
0
MIL-PRF-22684
110 130
50
70
90
150
170
AMBIENT TEMPERATURE °C
DERATING
DIMENSIONS in inches (millimeters)
1.50 0.125
[38.10 3.18]
A
C
D
B
(Max.)
VISHAY DALE
MODEL
C
A
B
D
(Max.)
0.150 0.020
(3.81 0.51)
0.065 0.015
(1.65 0.38)
0.244
(6.20)
0.016 0.002
(0.41 0.05)
CMF50
CMF55
CMF60
CMF65
CMF70
CMF07
CMF20
0.240 0.020
(6.10 0.51)
0.090 0.008
(2.29 0.20)
0.278
0.025 0.002
(0.64 0.05)
(7.06) (1)
0.344 0.031
(8.74 0.79)
0.145 0.015
(3.68 0.38)
0.425
(10.80)
0.025 0.002
(0.64 0.05)
0.562 0.031
(14.27 0.79)
0.180 0.015
(4.57 0.38)
0.687
(17.45)
0.025 0.002
(0.64 0.05)
0.562 0.031
(14.27 0.79)
0.180 0.015
(4.57 0.38)
0.687
(17.45)
0.032 0.002
(0.81 0.05)
0.240 0.020
(6.10 0.51)
0.090 0.008
(2.29 0.20)
0.278
(7.06)
0.025 0.002
(0.64 0.05)
0.375 0.040
(9.53 1.02)
0.145 0.015
(3.68 0.38)
0.425
(10.80)
0.032 0.002
(0.81 0.05)
Note
(1) 0.290" (7.37) for 0.25 % and 0.1 % resistance tolerances
MILITARY POWER RATING
MILITARY QUALIFIED
MIL-R-10509
MIL-PRF-22684
AT + 70 °C
WATTAGE
AT + 70 °C
AT + 125 °C
(C and E)
(D)
0.05
-
RN50
RN55
RN60
RN65
RN70
-
-
0.10
-
-
0.125
0.25
RN55
RN60
RN65
RN70
-
RL07
RL20
-
0.50
0.75 (1)
Notes
• Commercial equivalents of military styles are available with higher power ratings. Consult factory.
(1) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 Rev. D.
www.vishay.com
50
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31027
Revision: 11-Mar-10
CMF (Military RN and RL)
Metal Film Resistors, Military, MIL-R-10509 Qualified,
Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
Vishay Dale
120
CMF55
CMF07
CMF50
100
CMF60
CMF20
80
60
40
20
0
CMF65,
CMF70
0
0.125 0.25 0.375 0.5 0.625 0.75 0.875
1
1.125
APPLIED POWER IN W
THERMAL RESISTANCE
MARKING
Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm
Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 %
Value = three significant figures and multiplier
J = JAN (joint Army - Navy) brand
RN50: (3 lines)
RN55, RN60, RN65, RN70 (4 lines)
DALE
0137J
Company logo
4 digit date code and JAN brand
J50D JAN, type, characteristic
1211 Value
RN55D Type and characteristic
1211F Value and Tolerance
F137 Tolerance and 3 digit date code
Note
• RL series are color banded per MIL-PRF-22684
PERFORMANCE
MIL-R-10509
REQUIREMENT
MIL-PRF-22684
CHARACTERISTIC C
CHARACTERISTIC E
CHARACTERISTIC D
MIL Temperature Coefficient
+ 200 ppm/°C - 500 ppm/°C
50 ppm/°C
50 ppm/°C
25 ppm/°C
25 ppm/°C
200 ppm/°C
200 ppm/°C
Applicable Vishay Dale
Temperature Coefficient
100 ppm/°C
TEST
MILmax.
MILmax.
MILmax.
MILmax.
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Shock
0.50 % ΔR
0.50 % ΔR
0.50 % ΔR
1.50 % ΔR
0.50 % ΔR
0.50 % ΔR
1.00 % ΔR
0.50 % ΔR
0.50 % ΔR
0.25 % ΔR
0.25 % ΔR
0.25 % ΔR
0.50 % ΔR
0.25 % ΔR
0.25 % ΔR
0.50 % ΔR
0.25 % ΔR
0.10 % ΔR
0.25 % ΔR
0.25 % ΔR
0.25 % ΔR
0.50 % ΔR
0.25 % ΔR
0.25 % ΔR
0.50 % ΔR
0.25 % ΔR
0.10 % ΔR
1.00 % ΔR
0.50 % ΔR
0.50 % ΔR
1.50 % ΔR
0.50 % ΔR
0.50 % ΔR
2.00 % ΔR
0.50 % ΔR
0.50 % ΔR
Vibration
Load Life
Dielectric Withstanding Voltage
Effect of Solder
Document Number: 31027
Revision: 11-Mar-10
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
51
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
RN55D3162FB14
RESISTOR, METAL FILM, 0.125 W, 1 %, 100 ppm, 31600 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明