RNC50H1742FSRE6 [VISHAY]
RESISTOR, METAL FILM, 0.05 W, 1 %, 50 ppm, 17400 ohm, THROUGH HOLE MOUNT, AXIAL LEADED;型号: | RNC50H1742FSRE6 |
厂家: | VISHAY |
描述: | RESISTOR, METAL FILM, 0.05 W, 1 %, 50 ppm, 17400 ohm, THROUGH HOLE MOUNT, AXIAL LEADED 电阻器 |
文件: | 总4页 (文件大小:147K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ERC (Military RNC/RNR)
www.vishay.com
Vishay Dale
Metal Film Resistors, Military/Established Reliability,
MIL-PRF-55182 Qualified, Precision, Type RNC, Characteristics
J, H, K
FEATURES
• Meets requirements of MIL-PRF-55182
• Very low noise (- 40 dB)
• Verified failure rate (contact factory for current level)
• 100 % stabilization and screening tests. Group A testing,
if desired, to customer requirements
• Controlled temperature coefficient
• Epoxy coating provides superior moisture protection
• Standard lead on RNC product is solderable and weldable
• Traceability of materials and processing
• Monthly acceptance testing
• Vishay Dale has complete capability to develop specific
reliability programs designed to customer requirements
• Extensive stocking program at distributors and factory on
RNC50, RNC55, RNC60 and RNC65
• For MIL-PRF-55182 characteristics E and C product, see
Vishay Angstrohm’s HDN (Military RNR/RNN) datasheet
(www.vishay.com/doc?66001)
STANDARD ELECTRICAL SPECIFICATIONS
POWER POWER
MAXIMUM
WORKING
VOLTAGE (2)
V
MIL
SPEC.
SHEET
RESISTANCE
RANGE
TEMPERATURE
COEFFICIENT
ppm/°C
LIFE
(4)
GLOBAL
MODEL
MIL-PRF-55182
STYLE
RATING RATING TOLERANCE
FAILURE
P70 °C
P125 °C
W
ꢀ
RATE (1)
W
ERC50,
M, P,
R, S
RNC50, RNR50
RNC55, RNR55
07
01
0.10
0.05
0.10
0.1, 0.5, 1
0.1, 0.5, 1
200
200
10 to 796K
10 to 2M
10 to 2M
100 (K), 50 (H), 25 (J)
100 (K), 50 (H), 25 (J)
100 (K), 50 (H), 25 (J)
ERC50..31 (3)
ERC55,
ERC55..65 (3)
M, P,
R, S
0.125
M, P,
R, S
ERC55..200,
ERC55..201 (3)
RNC60, RNR60
03
0.25
0.125
0.1, 0.5, 1
250
2.01M to 3.01M 100 (K), 50 (H), 25 (J)
M
ERC65,
M, P,
R
RNC65, RNR65
RNC70, RNR70
05
06
0.50
0.75
0.25
0.50
0.1, 0.5, 1
0.1, 0.5, 1
300
350
10 to 3.01M
10 to 3.01M
100 (K), 50 (H), 25 (J)
100 (K), 50 (H), 25 (J)
ERC65..65 (3)
ERC70
ERC70..4 (3)
M, P,
R
Notes
(1)
(2)
(3)
(4)
Consult factory for current QPL failure rates.
Continuous working voltage shall be P x R or maximum working voltage, whichever is less.
Hot solder dipped leads.
Tolerance of 0.1 % is not applicable to characteristics K.
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
ppm/V
VAC
CONDITION
Voltage Coefficient, max.
Dielectric Strength
Insulations Resistance
Operating Temperature Range
Terminal Strength
Solderability
5/V when measured between 10 % and full rated voltage
RNC50, RNC55 and RNC60 = 450; RNC65 and RNC70 = 900
1011 dry; 109 after moisture test
°C
- 65 to + 175
lb
2 lb pull test on RNC50, RNC55, RNC60 and RNC65; 4.5 lb pull test on RNC70
Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208
RNC50 = 0.11; RNC55 = 0.35; RNC60 = 0.35; RNC65 = 0.84; RNC70 = 1.60
Weight
g
Revision: 21-Sep-12
Document Number: 31025
1
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ERC (Military RNC/RNR)
www.vishay.com
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RNC55H2152FRR36 (preferred part numbering format)
R
N
C
5
5
H
2
1
5
2
F
R
R
3
6
RESISTANCE
VALUE
TOLERANCE
CODE
FAILURE
RATE
MIL STYLE
CHARACTERISTICS
PACKAGING
SPECIAL
RNC = Solderable/
J
H
K =
=
=
ꢀ2 ꢁꢁp
2ꢂ ꢁꢁp
.ꢂꢂ ꢁꢁp
3 digit significant
M = .0ꢂ ꢃ/.ꢂꢂꢂ h
P= ꢂ0. ꢃ/.ꢂꢂꢂ h
R= ꢂ0ꢂ. ꢃ/.ꢂꢂꢂ h
S = ꢂ0ꢂꢂ. ꢃ/.ꢂꢂꢂ h
B = ꢂ0. ꢃ
D = ꢂ02 ꢃ
F = . ꢃ
B14 = Tin/lead, bulk
BSL = Tin/lead, bulk,
single lot date code
R36 = Tin/lead,
Blank = Standard
(Dash nupber)
(Uꢁ to 3 digits)
Frop 1 to 999
as aꢁꢁlicable
= Hot solder diꢁ (7ꢂ’s)
= Hot solder diꢁ (2ꢂ’s)
= Hot solder diꢁ
weldable
RNR = Solderable
only
(see Standard
Electrical
Sꢁecifications
table)
figure, followed
by a pultiꢁlier
Use “R” for
values < .ꢂꢂ Ω
10R0 = .ꢂ Ω
2152 = ꢀ.02 kΩ
3014 = 30ꢂ. MΩ
T/R (full; 2ꢂ, 22, 6ꢂ)
R64 = Tin/lead,
4
31
65
T/R (full; 62, 7ꢂ)
RE6 = Tin/lead,
T/R (.ꢂꢂꢂ ꢁieces)
RSL = Tin/lead, T/R,
single lot date code
(22’s, 62’s)
= Hot solder diꢁ (6ꢂ’s)
201
Historical Part Number example: RNC55H2152FR R36 (will continue to be accepted)
RNC55
H
2152
F
R
R36
MIL STYLE
CHARACTERISTIC
RESISTANCE VALUE
TOLERANCE CODE
FAILURE RATE
PACKAGING
Note
For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544).
•
DIMENSIONS in inches (millimeters)
E (1)
A
C
(Max.)
D
B
Note
(1)
Lead length for product in bulk pack. For product supplied in Tape and Reel, the actual lead length would be based on the body size, tape
spacing and lead trim.
VISHAY DALE
MODEL
MIL-PRF-55182
STYLE
C
A
B
D
E
(MAX.)
0.187
(4.75)
0.300
(7.62)
0.350
(8.89)
0.687
(17.45)
0.687
(17.45)
RNC50,
RNR50
0.150 0.020
(3.81 0.51)
0.070 0.010
(1.78 0.25)
0.094 0.012
(2.39 0.30)
0.097 0.012
(2.46 0.30)
0.180 0.015
(4.57 0.38)
0.180 0.015
(4.57 0.38)
0.016 0.002
(0.41 0.05)
0.025 0.002
(0.64 0.05)
0.025 0.002
(0.64 0.05)
0.025 0.002
(0.64 0.05)
0.032 0.002
(0.81 0.05)
1.25 0.266
(31.75 6.76)
1.50 0.125
(38.1 3.18)
1.50 0.125
(38.1 3.18)
1.50 0.125
(38.1 3.18)
1.50 0.125
(38.1 3.18)
ERC50
RNC55,
RNR55
RNC60,
RNR60
RNC65,
RNR65
RNC70,
RNR70
0.250 + 0.031 - 0.046
(6.35 + 0.79 - 1.17)
0.280 0.020
ERC55
ERC55..200
ERC65
(7.11 0.51)
0.562 0.031
(14.27 0.79)
0.562 0.031
ERC70
(14.27 0.79)
APPLICABLE MIL-SPECIFICATIONS
MATERIAL SPECIFICATIONS
MIL-PRF-55182:
The ERC series meets the electrical, environmental and
dimensional requirements of MIL-PRF-55182.
Element
Vacuum-deposited nickel-chrome alloy
Core
Fire-cleaned high purity ceramic
MIL-R-10509:
Encapsulation
Specially formulated epoxy compound
MIL-PRF-55182 supercedes MIL-R-10509 on new designs.
The ERC series meets or exceeds MIL-R-10509
requirements.
Standard lead material is solder-coated
copper solderable and weldable per
MIL-STD-1276, type C
Termination
DOCUMENTATION:
Qualification and failure rate verification test data is
maintained by Vishay Dale and is available upon request.
Lot traceability and identification data is maintained by
Vishay Dale for five years.
POWER RATING
Power ratings are based on the following two conditions:
1. 2.0 % maximum DR in 10 000 h load life
2. + 175 °C maximum operating temperature
CAGE CODE: 91637
Revision: 21-Sep-12
Document Number: 31025
2
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ERC (Military RNC/RNR)
www.vishay.com
Vishay Dale
Vishay Dale ERC resistors have an operating temperature range of - 65 °C to + 175 °C. They must be derated according to the
following curve:
120
100
120
100
ERC50
ERC55,
ERC55-200
80
60
80
60
40
20
0
ERC65,
ERC70
40
20
0
0
25
50
75 100
150 175 200
- 65 - 50 - 25
0
0.125 0.25 0.375 0.5 0.625 0.75 0.875
1
1.125
125
APPLIED POWER IN W
AMBIENT TEMPERATURE IN °C
DERATING
THERMAL RESISTANCE
MARKING (per MIL-PRF-55182)
Characteristics: K = 100 ppm, H = 50 ppm, J = 25 ppm
Tolerance: F = 1 %, D = 0.5 %, B = 0.1 %
Value = Three significant figures and multiplier
J = JAN (Joint Army - Navy) brand
RNC/RNR50, 55 (4 lines)
RNC/RNR60, 65, 70 (5 lines)
CAGE code
91637
1213J
RNC60J
1211FS
1209A
D
Manufacturer’s code
3 digit date code and characteristic
Value
4 digit date code and JAN
Style and characteristic
Value, tolerance, and failure rate
Production lot code
210H
1003
FSCJ
Tolerance, failure rate, lead material and JAN
Revision: 21-Sep-12
Document Number: 31025
3
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明