RV0805E1323DN [VISHAY]

RESISTOR, THIN FILM, 0.2 W, 0.5 %, 25 ppm, 132000 ohm, SURFACE MOUNT, 0805, CHIP, ROHS COMPLIANT;


型号：	RV0805E1323DN
厂家：	VISHAY
描述：	RESISTOR, THIN FILM, 0.2 W, 0.5 %, 25 ppm, 132000 ohm, SURFACE MOUNT, 0805, CHIP, ROHS COMPLIANT
文件：	总4页 (文件大小：103K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

www.vishay.com

Vishay Sfernice

CECC ( ) 40401-010 Qualified Thin Film Resistor Chip

FEATURES

• Nickel barrier for high temperature operating

conditions

• Tight TCR < 10 ppm/°C, and in lot tracking

< 5 ppm/°C in (- 55 °C, + 155 °C temperature

range)

• Very low noise < 35 dB and voltage coefficient 0.1 ppm/V

• Non-inductive

• Laser trimmed down to 0.1 %

• Wraparound resistance less than 0.01 

Utilizing proven expertise in Thin Film resistors, VISHAY

provides a CECC qualified chip with the same reliability

available

and stability found in QPL resistors. These chips are

available in a wide range of sizes, values and performance

characteristics.

• Antistatic waffle-pack or tape and reel packaging

• High stability (0.05 % - 1000 h at Pn at + 70 °C)

• Lead (Pb)-free available

• Withstand moisture resistance test of AEC-Q200

• Conform to EN 140401 804

CONSTRUCTION

Passivated NiCr

resistance film

• Compliant to RoHS Directive 2002/95/EC

Passivation

Note

Solder

* Pb containing terminations are not RoHS compliant, exemptions

may apply

coating

Nickel barrier

TYPICAL PERFORMANCE

High purity

alumina substrate

Adhesion layer

ABS

TCR

TOL.

10 ppm/°C

ABS

0.1 %

STANDARD ELECTRICAL SPECIFICATIONS

TEST

SPECIFICATIONS

CONDITIONS

MODEL

E: 25 ppm/°C

Y: 10 ppm/°C

Absolute TCR

- 55 °C to + 155 °C

0.1 %, 0.5 %, 1 %, 2 %, 5 % (R  500 )

0.5 %, 1 %, 2 %, 5 % (R  100 )

0.1 ppm/V

Absolute tolerance

Voltage coefficient

Operating temperature range

Storage temperature range

Noise

- 55 °C to + 155 °C

- 35 dB typical

Thermal EMF

< 0.1 μV/°C

Load life stability

(0.1 % Rn ⁽¹⁾0.05 )

1000 h Pn at + 70 °C

CASE SIZES

0505, 0603

100  to 260 k

125 mW

0805

100  to 300 k

200 mW

1206

100  to 1 M

330 mW

Resistance range ⁽²⁾

Power rating Pn

Limiting voltage (UL)

50 V

75 V

Notes

(1)

Rn: Nominal resistance

Extended resistance range on request

(2)

Revision: 08-Feb-12

Document Number: 60022

For technical questions, contact: sfer@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

www.vishay.com

Vishay Sfernice

DIMENSIONS in millimeters (inches)

D/E

SERIES/

CASE SIZES

Min.

Max.

Min.

1.143

(0.045)

Max.

Min.

Max.

Min.

Max.

1.198

(0.047)

1.502

(0.059)

1.397

(0.055)

0.250

(0.010)

0.510

(0.020)

0.373

(0.015)

0.627

(0.025)

RV 0505

RV 0603

RV 0805

RV 1206

1.368

(0.054)

1.672

(0.066)

0.623

(0.025)

0.877

(0.035)

0.250

(0.010)

0.510

(0.020)

0.373

(0.015)

0.627

(0.025)

1.758

(0.069)

2.062

(0.081)

1.143

(0.045)

1.397

(0.055)

0.250

(0.010)

0.510

(0.020)

0.373

(0.015)

0.627

(0.025)

2.908

(0.114)

3.212

(0.126)

1.473

(0.058)

1.727

(0.068)

0.250

(0.010)

0.510

(0.020)

0.373

(0.015)

0.627

(0.025)

POPULAR OPTION

Option: AEC-Q200 moisture resistance

Option to order: 0058: Specific production process to withstand 85 °C/85 % RH at Pn/10

ENVIRONMENTAL TEST

VALUES AND DRIFTS (R/R %)

TEST

CONDITIONS

CECC REQUIREMENTS

TYPICAL PERFORMANCE

Overload

6.25 x rated power/2 s (or 2 UL)

0.05 % Rn ⁽²⁾+ 0.05 

0.01 % Rn ⁽²⁾

- 55/+ 155 °C

5 moisture cycles

Climatic sequences ⁽¹⁾

0.1 % Rn ⁽²⁾+ 0.05 

0.05 % Rn ⁽²⁾+ 0.05 

0.02 % Rn ⁽²⁾

- 55/+ 155 °C

5 cycles 30 min

Thermal shock ⁽¹⁾

+ 70 °C/Pn

1000 h

Load life ⁽¹⁾

0.1 % Rn ⁽²⁾+ 0.05 

0.05 % Rn ⁽²⁾+ 0.05 

0.1 % Rn ⁽²⁾+ 0.05 

0.05 % Rn ⁽²⁾

0.02 % Rn ⁽²⁾

0.01 % Rn ⁽²⁾

Resistance to solder heat

+ 260 °C/10 s

+ 40 °C/93 % HR

Pn/10

AEC-Q200 ⁽³⁾

85 °C/85 % RH/Pn/10

1000 h

Moisture resistance ⁽¹⁾

0.5 % + 0.05 

Max. < 0.3 % + 0.05 

High temperature storage

Bending ⁽¹⁾

1000 h at + 155 °C

10 bends/2 mm/5 s

0.1 % Rn ⁽²⁾+ 0.05 

0.05 % Rn ⁽²⁾+ 0.05 

0.05 % Rn ⁽²⁾

0.02 % Rn ⁽²⁾

SPECIFIC CONDITIONS DUE TO TERMINATION TYPE

CONDITIONS

VALUES AND DRIFTS

TEST

B; G

VISHAY REQUIREMENTS

TYPICAL PERFORMANCE

+ 235 °C/2 s

Sn60Pb40 alloy

+ 245 °C/3 s

Sn97Ag3 alloy

Solderability

VISUAL INSPECTION

+ 255 °C/40 s

(on parts)

High T° reflow profile

N/A

0.02 % Rn ⁽²⁾+ 0.05 

0.01 % Rn ⁽²⁾+ 0.05 

Notes

(1)

(2)

(3)

Test requiring parts to be mounted on PCB will be performed with the requirement that termination alloy will be the same as solder paste

alloy. Gold termination will be tested as B termination

Rn: Nominal Resistance

Pn: Nominal Power

Option to order: 0058

Revision: 08-Feb-12

Document Number: 60022

For technical questions, contact: sfer@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

www.vishay.com

Vishay Sfernice

DERATING CURVE

PACKAGING INFORMATION

NUMBER OF PIECES PER PACKAGE

100

SIZE

TAPE AND REEL

WAFFLE PACK

(2" x 2")

TAPE

WIDTH

Min.

Max.

0505

0603

0805

1206

400

8 mm

(0.315”)

100

4000

100

140

60 70 80

100 120

125

140 155

Ambient Temperature in °C

MECHANICAL SPECIFICATIONS

Resistive material

Nichrome

Alumina

Substrate material

Plating

Tin lead over nickel or tin silver over nickel or gold over nickel

Per CECC Specs

Marking resistance to solvents

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: RV0505E1001DBT1016

GLOBAL

MODEL

SIZE

TCR

VALUE

TOLERANCE

TERMINATION

PACKAGING

OPTION

0505

0603

0805

1206

E = 25 ppm/°C

Y = 10 ppm/°C

The first 3 digits

(2 digits are enough

for tolerance G and J)

are significant figures

and the last digit

specifies the number

of zeros to follow.

R designates

B = 0.1 %

D = 0.5 %

F = 1 %

G = 2 %

J = 5 %

B: SnPb over

nickel barrier

N: SnAg over

nickel barrier

G: Gold over

nickel barrier

Blank =

Waffle pack

T =

Leave blank

if no option

Tape and reel

B: Lead bearing version

N and G: Lead (Pb)-free/RoHS version

decimal point

10R0 = 10 

3901 = 3900 

1004 = 1 M

Historical Part Number example: RV 0505 25PPM 1K 0.5 % B TR R1016

PART NUMBER DESCRIPTION (for information only)

0505

25 PPM

0.5 %

R1016

MODEL

SIZE

TCR

OHMIC VALUE

TOLERANCE

TERMINATION

PACKAGING

OPTION

Revision: 08-Feb-12

Document Number: 60022

For technical questions, contact: sfer@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Revision: 12-Mar-12

Document Number: 91000

RV0805E1323DN [VISHAY]

相关型号：

RV0805E3651BN

RV0805E6570BG

RV0805FR-071M2L

RV0805FR-073M24L

RV0805FR-073M48L

RV0805FR-075M9L

RV0805FR-07750KL

RV0805FR-7113KL

RV0805FR-7510K

RV0805FR-7510KL

RV0805FR-7511K

RV0805FR-7511KL