S102C19K300VB [VISHAY]
Fixed Resistor, Metal Foil, 0.6W, 19300ohm, 300V, 0.005% +/-Tol, -2,2ppm/Cel, 3011,;型号: | S102C19K300VB |
厂家: | VISHAY |
描述: | Fixed Resistor, Metal Foil, 0.6W, 19300ohm, 300V, 0.005% +/-Tol, -2,2ppm/Cel, 3011, |
文件: | 总6页 (文件大小:106K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
S Series
Vishay Foil Resistors
High Precision Foil Resistor with TCR of ꢀ2. ꢁꢁpm/C,
Tolerance of .2..0 ꢂ and Load Life Stability of .2..0 ꢂ
FEATURES
•
Tepꢁerature coefficient of resistance (TCR):
- 00 /C to + 1ꢀ0 /C, ꢀ0 /C ref2
- S102C series: 2 ppm/°C typical (see table 1)
- S102K series: 1 ppm/°C typical (see table 1)
Rated power: to 1 W at + 125 °C
Tolerance: 0.005 % (50 ppm)
Load life stability: to 0.005 % at 70 °C, 2000 h at rated
power
•
•
•
•
Resistance range: 0.5
Ω to 1 MΩ (higher or lower values of
resistance are available)
INTRODUCTION
• Vishay Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no extra
cost or delivery (e.g. 1K2345 vs. 1K)
Bulk Metal® Foil (BMF) technology outperforms all other
resistor technologies available today for applications that
require high precision and high stability.
• Electrostatic discharge up to 25 000 V
•
Non inductive, non capacitive design
• Rise time: 1 ns effectively no ringing
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications. BMF
technology allows us to produce customer orientated
products, designed to satisfy challenging and specific
technical requirements.
•
•
•
•
•
Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB)
Thermal EMF: 0.05 µV/°C typical
Voltage coefficient: < 0.1 ppm/V
Low inductance: < 0.08 µH typical
Non hot spot design
• Terminal finish: lead (Pb)-free or tin/lead alloy
Model S series made from Vishay BMF offers low TCR,
excellent load life stability, tight tolerance, fast response
time, low current noise, low thermal EMF and low voltage
coefficient, all in one resistor.
•
Matched sets are available per request
(TCR tracking: to 0.5 ppm/°C)
• Prototype quantities available in just 5 working days
or sooner. For more information, please contact
foil@vishay.com
The S series is virtually insensitive to destabillizing factors.
The resistor element is a solid alloy that displays the
desirable bulk properties of its parent material, thus it is
inherently stable and noise free.
Vishay’s Bulk Metal® S series resistors are the modern
generation of precision resistors. The standard design of
• For better TCR and PCR performances please review the
Zꢀ.1 datasheet
APPLICATIONS
• High precision amplifiers
• Down-hole (high temperature)
• High precision instrumentation
• Medical and test equipment
• Industrial
these resistors provides
a
unique combination of
characteristics found in no other single resistor.
• Audio (high end stereo equipment)
• EB applications (electron beam scanning and recording
equipment, electron microscopes)
• Military, airborne
Our application engineering department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
• Measurement instrumentation
FIGURE 1 - FOIL RESISTOR TCR COMPARISON OF
TABLE 1 - RESISTANCE VERSUS TCR
FOIL ALLOYS IN MILITARY RANGE
(- 55 °C to + 125 °C, + 25 °C ref.)
+ 10.
+ 1..
TYPICAL TCR AND
MAX SPREAD
(ꢁꢁpm/C)
RESISTANCE
VALUE (Ω)
RESISTOR
1 ꢁꢁpm°C
+ 0.
ΔR
R
.
S102(C)
S102(K)
S102(C)
S102(K)
S102(C)
S102(K)
80 to < 150K
80 to < 100K
2
1
2
1
2
1
2.5
2.5
3.5
3.5
4.5
4.5
(ꢁꢁp)
- 0.
- 1..
- 10.
- ꢀ..
ꢀ ꢁꢁpm°C
50 to < 80
1 to < 50
- 0.
- 00
- ꢀ0
.
+ ꢀ0
+ 0.
+ 70 + 1.. + 1ꢀ0
Tepꢁerature (/C)
C Alloy
ꢀ ꢁꢁpm°C
K Alloy
1 ꢁꢁpm°C
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63001
Revision: 25-Jun-09
For any questions, contact: foil@vishay.com
www.vishay.com
1
S Series
Vishay Foil Resistors
FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS
Front View
Rear View
Optional Customer Part Number
Print specification, etc. if required
L
W
Date Code
Resistance
01
10
VISHAY
XXXX
S102C
XXXXXX
100R01
0.01 %
Value Code
Year Week
H
Tolerance
ST1)
SW
LL
Model Number
LS
Lead Material #22 AWG
Round Solder Coated Copper
Note
1. The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board. This is to allow for proper cleaning of flux and other contaminants from the unit
after all soldering processes.
TABLE 2 - MODEL SELECTION
AMBIENT
TIGHTEST
TOLERANCE
VS2 LOWEST
RESISTANCE
VALUE
DIMENSIONS
pp
POWER RATING
RESISTANCE MAXIMUM
AVERAGE
WEIGHT
IN GRAMS
MODEL
NUMBER
RANGE
WORKING
VOLTAGE
at
at
F (1)
(INCHES)
(Ω)
INCHES
+ 7. /C + 1ꢀ0 /C
0.6 W
0.3 W
0.2 W
W: 0.105 0.010
L: 0.300 0.010
H: 0.326 0.010
ST: 0.010 min.
SW: 0.035 0.010 1.02 0.13
LL: 1.000 0.125 25.4 3.18
LS: 0.150 0.0054 3.81 0.13
2.67 0.25
7.62 0.25
8.28 0.25
0.254 min.
S102C
1 to 150K
1 to 100K
1 to 500K
1 to 300K
1 to 750K
1 to 500K
0.5 to 1M
0.5 to 600K
(S102J) (2)
up to 100K
0.4 W
300
350
350
500
0.6
1.4
1.9
4.0
S102K
(S102L) (2)
over 100K
1.0 W
0.5 W
0.3 W
W: 0.160 max.
L: 0.575 max.
H: 0.413 max.
ST: 0.035 0.005 0.889 0.13
SW: 0.050 0.005 1.27 0.13
LL: 1.000 0.125
LS: 0.400 0.020 10.16 0.51
4.06 max.
14.61 max.
10.49 max.
S104D
(S104F) (1)
up to 200K
(0.138)
(0.565)
(0.413)
0.6 W
0.005 %/50 Ω
0.01 %/25 Ω
0.02 %/12 Ω
0.05 %/5 Ω
0.1 %/2 Ω
S104K
over 200K
25.4 3.18
1.5 W 0.75 W
up to 300K
W: 0.160 max.
L: 0.820 max.
H: 0.413 max.
ST: 0.035 0.005 0.889 0.13
SW: 0.050 0.005 1.27 0.13
LL: 1.000 0.125
LS: 0.650 0.020 16.51 0.51 (0.7 0.05)
4.06 max.
20.83 max.
10.49 max.
(0.138)
(0.890)
(0.413)
S105D
(S105F) (1)
0.50 %/1 Ω
0.8 W
0.4 W
S105K
S106D
S106K
over 300K
25.4 3.18
2.0 W
1.0 W
1.0 W
W: 0.260 max.
L: 1.200 max.
H: 0.413 max.
ST: 0.035 0.005 0.889 0.13
SW: 0.050 0.005 1.27 0.13
6.60 max.
30.48 max.
10.49 max.
up to 400K
0.5 W
over 400K
LL: 1.000 0.125
25.4 3.18
LS: 0.900 0.020 22.86 0.51
Notes
(1)
(2)
S104F and S105F have different package dimensions (see last column). All other specifications are the same.
0.200" (5.08 mm) lead spacing available - specify S102J for S102C, and S102L for S102K.
www.vishay.com
2
For any questions, contact: foil@vishay.com
Document Number: 63001
Revision: 25-Jun-09
S Series
Vishay Foil Resistors
FIGURE 3 - POWER DERATING CURVE
FIGURE 4 - TRIMMING TO VALUES
(conceptual illustration)
- 55 °C
+ 70 °C
1.. %
70 %
0. %
ꢀ0 %
.
Rated Power
Current Path
Before Trimming
Interloop Capacitance
Reduction in Series
Current Path
After Trimming
Trimming Process
Mutual Inductance
Reduction due
to Change in
Recommended
operation for
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
< 150 ppm ΔR
Current Direction
after 2000 h
load life
Resistance
- 70 - 0. - ꢀ0
.
+ ꢀ0 + 0. + 70 + 1.. + 1ꢀ0 + 10. + 170 + ꢀ..
Apbient Tepꢁerature (/C)
Note: Foil shown in black, etched spaces in white
TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON
MIL-PRF-0018ꢀ
CHAR J
S-SERIES
MAXIMUM ΔR
S-SERIES
TYPICAL ΔR
Test Grouꢁ I
Thermal shock, 5 x (- 65 °C to + 150 °C)
Short time overload, 6.25 x rated power
Test Grouꢁ II
0.2 %
0.2 %
0.01 % (100 ppm)
0.01 % (100 ppm)
0.002 % (20 ppm)
0.003 % (30 ppm)
Resistance temperature characteristics
Characteristic
25 ppm/°C
4.5 ppm/°C
2.0 ppm/°C
Low temperature storage (24 h at - 65 °C)
0.15 %
0.15 %
0.2 %
0.01 % (100 ppm)
0.01 % (100 ppm)
0.01 % (100 ppm)
0.002 % (20 ppm)
0.002 % (20 ppm)
0.002 % (20 ppm)
Low temperature operation
(45 min, rated power at - 65 °C)
Terminal strength
Test Grouꢁ III
DWV
0.15 %
0.1 %
0.4 %
0.01 % (100 ppm)
0.01 % (100 ppm)
0.05 % (500 ppm)
0.002 % (20 ppm)
0.005 % (50 ppm)
0.01 % (100 ppm)
Resistance to solder heat
Moisture resistance
Test Grouꢁ IV
Shock
0.2 %
0.2 %
0.01 % (100 ppm)
0.01 % (100 ppm)
0.002 % (20 ppm)
0.002 % (20 ppm)
Vibration
Test Grouꢁ V
Life test at 0.3 W/+ 125 °C
2000 h
0.5 %
2.0 %
0.015 % (150 ppm)
0.05 % (500 ppm)
0.01 % (100 ppm)
0.03 % (300 ppm)
10 000 h
Test Grouꢁ Va
Life test at 0.6 W (2 x rated power)/+ 70 °C, 2000 h
Test Grouꢁ VI
0.5 %
2.0 %
0.015 % (150 ppm)
0.1 % (1000 ppm)
< 0.1 ppm/V
0.01 % (100 ppm)
0.05 % (500 ppm)
< 0.1 ppm/V
High temperature exposure (2000 h at + 175 °C)
Test Grouꢁ VII
Voltage coefficient
5 ppm/V
Document Number: 63001
Revision: 25-Jun-09
For any questions, contact: foil@vishay.com
www.vishay.com
3
S Series
Vishay Foil Resistors
STANDARD OPERATIONS AND TEST
CONDITIONS
A. Standard Test Operations:
IMPROVED PERFORMANCE TESTING (IPT)
The preceding information is based on product directly off
the production line. Improved performance (meaning
increased time stability with load and other stresses) is
available through factory conducted “Improved Performance
Testing”. The test routine is usually tailored to the users
stability objectives and product that has been screened can
be brought down to a potential load life of less than 50 ppm.
By 100 % Inspection
•
•
•
Short-time overload (6.25 x rated power for 5 s)
Resistance - tolerance check
Visual and mechanical
By Sample Inspection
•
•
TCR
Various screen test routines are available and all anticipated
stresses must be taken into account before settling on one
specific test routine. Our applications engineering
department is prepared to discuss and recommend
appropriate routines given the full spectrum of anticipated
stresses and stability requirements.
Environmental tests per table 3 on a quarterly basis to
establish performance by similarity
B. Standard Test Conditions:
•
•
•
Lead test point: 0.5" (12.7 mm) from resistor body
Temperature: + 23 °C 2 °C
Relative humidity: per MIL-STD-202
TABLE 4 - “S” SERIES SPECIFICATIONS
Stability (1)
Load life at 2000 h
0.015 % (150 ppm) Maximum ΔR at 0.3 W/+ 125 °C
0.005 % (50 ppm)
0.05 % (500 ppm)
0.01 % (100 ppm)
0.010 µV
Maximum ΔR at 0.1 W/+ 70 °C
Maximum ΔR at 0.3 W/+ 125 °C
Maximum ΔR at 0.05 W/+ 125 °C
(RMS)/V of applied voltage (- 40 dB)
Load life at 10 000 h
Current Noise
High Frequency Oꢁeration
Rise time
1.0 ns at 1 kΩ
Inductance (L) (2)
Capacitance (C)
Voltage Coefficient
Therpal EMF (4)
0.1 µH maximum; 0.08 µH typical
1.0 pF maximum; 0.5 pF typical
< 0.1 ppm/V (3)
0.1 µV/°C
1 µV/W
Maximum; 0.05 µV/°C typical
(Model S102C)
Notes
(1)
Load life ΔR maximum can be reduced by 80 %, please contact applications engineering department.
(2)
(3)
(4)
Inductance (L) due mainly to the leads.
The resolution limit of existing test equipment (within the measurement capability of the equipment, or “essentially zero”.)
µV/°C relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor.
www.vishay.com
4
For any questions, contact: foil@vishay.com
Document Number: 63001
Revision: 25-Jun-09
S Series
Vishay Foil Resistors
TABLE 5 - GLOBAL PART NUMBER INFORMATION (1)
NEW GLOBAL PART NUMBER: Y...78.K0...V9L (ꢁreferred ꢁart nupber forpat)
DENOTES PRECISION
VALUE
CHARACTERISTICS
Y
R = Ω
K = kΩ
M = MΩ
. = standard
9 = lead (Pb)-free
1 to 999 = custom
Y
.
.
.
7
8
.
K
0
.
.
.
V
9
L
PRODUCT CODE
RESISTANCE TOLERANCE
PACKAGING
...7 = S102C
.780 = S102J
..6ꢀ = S102K
.786 = S102L
..11 = S104D
0.11 = S104F
.1.1 = S104K
41.1 = S104L
..1ꢀ = S105D
4.1ꢀ = S105F
.1.ꢀ = S105K
41.ꢀ = S105L
..13 = S106D
.1.3 = S106K
V = 0.005 %
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
L = bulk pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y0007 80K5000 V 9 L:
TYPE: S102C
VALUE: 80.5 kΩ
ABSOLUTE TOLERANCE: 0.005 %
TERMINATION: lead (Pb)-free
PACKAGING: bulk pack
HISTORICAL PART NUMBER: S1.ꢀC T ꢀ0.R.. V B (will continue to be used)
S1.ꢀC
T
ꢀ0.R..
V
B
MODEL
TERMINATION
RESISTANCE VALUE
TOLERANCE
PACKAGING
B = bulk pack
S1.ꢀC
S1.ꢀJ
S1.ꢀK
S1.ꢀL
S1.4D
S1.4F
S1.4K
S1.4L
S1.0D
S1.0F
S1.0K
S1.0L
S1.6D
S1.6K
T = lead (Pb)-free
None = tin/lead alloy
ꢀ0.R.. = 250.00 Ω
0Kꢀ31. = 5.231 kΩ
1M... = 1 MΩ
V = 0.005 %
T = 0.01 %
Q = 0.02 %
A = 0.05 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
Note
(1)
For non-standard requests, please contact application engineering.
Document Number: 63001
Revision: 25-Jun-09
For any questions, contact: foil@vishay.com
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
S102C19R100QB
Fixed Resistor, Metal Foil, 0.6W, 19.1ohm, 300V, 0.02% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C1K6500CB
Fixed Resistor, Metal Foil, 0.6W, 1650ohm, 300V, 0.25% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C20K000T
RESISTOR, METAL FOIL, 0.3 W, 0.01 %, 4.5 ppm, 20000 ohm, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
S102C21K800AB
Fixed Resistor, Metal Foil, 0.6W, 21800ohm, 300V, 0.05% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C232R00BB
Fixed Resistor, Metal Foil, 0.6W, 232ohm, 300V, 0.1% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C237R00AB
Fixed Resistor, Metal Foil, 0.6W, 237ohm, 300V, 0.05% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C26K6750.01%
RESISTOR, METAL FOIL, 0.3W, 0.01%, 4.5ppm, 26675ohm, THROUGH HOLE MOUNT, RADIAL LEADED
TAOS
S102C32K0000.01%
RESISTOR, METAL FOIL, 0.6W, 0.01%, 4.5ppm, 32000ohm, THROUGH HOLE MOUNT, RADIAL LEADED
TAOS
S102C37K9000.01%
RESISTOR, METAL FOIL, 0.6W, 0.01%, 4.5ppm, 37900ohm, THROUGH HOLE MOUNT, RADIAL LEADED
TAOS
S102C5R1100CB
Fixed Resistor, Metal Foil, 0.6W, 5.11ohm, 300V, 0.25% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C690R00DB
Fixed Resistor, Metal Foil, 0.6W, 690ohm, 300V, 0.5% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
©2020 ICPDF网 联系我们和版权申明