S102JT8K2500BB [VISHAY]

Fixed Resistor, Metal Foil, 0.3W, 8250ohm, 300V, 0.1% +/-Tol, 2ppm/Cel, Through Hole Mount, 3011, RADIAL LEADED, ROHS COMPLIANT;


型号：	S102JT8K2500BB
厂家：	VISHAY
描述：	Fixed Resistor, Metal Foil, 0.3W, 8250ohm, 300V, 0.1% +/-Tol, 2ppm/Cel, Through Hole Mount, 3011, RADIAL LEADED, ROHS COMPLIANT 电阻器
文件：	总6页 (文件大小：1879K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

S Series

Vishay Foil Resistors

High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,

Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 %

FEATURES

•

Temperature coefficient of resistance (TCR):

- 55 °C to + 125 °C, 25 °C ref.

- S10XC / D series: ± 2 ppm/°C typical (see table

- S10

XK series: ± 1 ppm/°C typical (see table 1)

•

Power rating: to 1 W at + 125 °C

Resistance tolerance: to ± 0.005 % (50 ppm)

Load life stability: ± 0.005 % at 70 °C, 2000 h at rated power

Resistance range: 0.5

values, please contact Application Engineering)

Ω to 1 MΩ (for higher or lower

INTRODUCTION

• Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

Bulk Metal^®Foil (BMF) technology outperforms all other

resistor technologies available today for applications that

require high precision and high stability.

• Electrostatic discharge (ESD) at least to 25 kV

•

Non inductive, non capacitive design

• Rise time: 1 ns effectively no ringing

This technology has been pioneered and developed by

Vishay Foil Resistors (VFR), and products based on this

technology are the most suitable for a wide range of

applications. BMF technology allows the production of

customer-oriented products, designed to satisfy specific

challenging technical requirements.

•

Current noise: 0.010 µV_RMS/V of applied voltage (< - 40 dB)

Thermal EMF: 0.05 µV/°C

Voltage coefficient: < 0.1 ppm/V

Low inductance: < 0.08 µH

Non hot-spot design

• Terminal finishes available: lead (Pb)-free, tin/lead alloy

The S series of BMF resistors offers low TCR, excellent load

life stability, tight tolerance, fast response time, low current

noise, low thermal EMF and low voltage coefficient, all in one

resistor.

•

Matched sets are available on request

(TCR tracking: to 0.5 ppm/°C)

• Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

The S series is virtually insensitive to destabillizing factors.

The resistor element is a solid alloy that displays the

desirable bulk properties of its parent material, thus it is

inherently stable and noise free. The standard design of

• For better TCR performances please review the

datasheets for the Z Series and Z203

these resistors provides

unique combination of

characteristics found in no other single resistor.

FIGURE 1 - TYPICAL RESISTANCE CHANGE

VERSUS TEMPERATURE CURVES AND

CHORD SLOPES (TCR) OF TWO ALLOY

TYPES IN MILITARY RANGE

VFR's application engineering department is available to

advise and to make recommendations. For non-standard

technical requirements and special applications, please

contact foil@vishaypg.com.

+ 150

+ 100

TABLE 1 - RESISTANCE VERSUS TCR

–1 ppm/°C

+2 ppm/°C

+1 ppm/ C

(- 55 °C to + 125 °C, + 25 °C ref.)

+ 50

ΔR

TYPICAL TCR AND

MAX SPREAD

(ppm/°C)

RESISTANCE

VALUE (Ω)

RESISTOR^{(1) (2)}

(ppm)

- 50

S10X(C) / (D)

S10X(K)

80 to < 1M

± 2 ± 2.5

± 1 ± 2.5

± 2 ± 3.5

± 1 ± 3.5

± 2 ± 4.5

± 1 ± 4.5

- 100

- 150

- 200

–2 ppm/°C

80 to < 600K

S10X(C) / (D)

S10X(K)

50 to < 80

0.5 to < 50

- 50

- 55

- 25

+ 25

+ 50

+ 75 + 100 + 125

S10X(C) / (D)

S10X(K)

Temperature (°C)

C Alloy

K Alloy

2 ppm/°C

1 ppm/°C

(1)

X refers to S Series model number - see Table 2

⁽²⁾(C) and (D) refer to C Foil Alloy Types; (K) refers to the K Foil Alloy type - see Figure 1

* Pb containing terminations are not RoHS compliant, exemptions may apply

Document Number: 63001

Revision: 29-Jun-11

For any questions, contact: foil@vishaypg.com

www.vishayfoilresistors.com

S Series

Vishay Foil Resistors

FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS

Front View

Rear View

Optional Customer Part Number

Print specification, etc. if required

Date Code

Resistance

VFR

XXXX

S102C

XXXXXX

100R01

0.01 %

Value Code

Year Week

Tolerance

ST¹⁾

Model Number

Lead Material #22 AWG

Round Solder Coated Copper

(Pb - free coating available)

Note

1. Standoffs provided to allow proper flushing of flux, debris, and contaminates from under resistor after all solder operations.

2. The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board

when the standoffs are seated on the printed circuit board.

TABLE 2 - MODEL SELECTION

AMBIENT

TIGHTEST

TOLERANCE

VS. LOWEST

RESISTANCE

VALUE

DIMENSIONS

POWER RATING

RESISTANCE MAXIMUM

AVERAGE

WEIGHT

IN GRAMS

MODEL

NUMBER

RANGE

WORKING

VOLTAGE

F ⁽¹⁾

(INCHES)

(Ω)

INCHES

+ 70 °C + 125 °C

0.6 W

0.3 W

0.2 W

W: 0.105 ± 0.010

L: 0.300 ± 0.010

H: 0.326 ± 0.010

ST: 0.010 min.

SW: 0.040 ± 0.005 1.02 ± 0.13

LL: 1.000 ± 0.125

LS: 0.150 ± 0.005

2.67 ± 0.25

7.62 ± 0.25

8.28 ± 0.25

0.254 min.

S102C

1 to 150K

1 to 100K

1 to 500K

1 to 300K

1 to 750K

1 to 500K

0.5 to 1M

0.5 to 600K

(S102J) ⁽²⁾

up to 100K

0.4 W

300

350

500

0.6

1.4

1.9

4.0

S102K

(S102L) ⁽²⁾

over 100K

25.4 ± 3.18

3.81 ± 0.13

1.0 W

0.5 W

0.3 W

W: 0.160 max.

L: 0.575 max.

H: 0.413 max.

ST: 0.035 ± 0.005 0.889 ± 0.13

SW: 0.050 ± 0.005 1.27 ± 0.13

LL: 1.000 ± 0.125

LS: 0.400 ± 0.020 10.16 ± 0.51

4.06 max.

14.61 max.

10.49 max.

(0.138)

(0.565)

(0.413)

S104D

(S104F) ⁽¹⁾

up to 200K

0.6 W

0.005 %/50 Ω

0.01 %/25 Ω

0.02 %/12 Ω

0.05 %/5 Ω

0.1 %/2 Ω

0.50 %/1 Ω

1 %/0.5 Ω

S104K

over 200K

25.4 ± 3.18

1.5 W 0.75 W

up to 300K

W: 0.160 max.

L: 0.820 max.

H: 0.413 max.

ST: 0.035 ± 0.005 0.889 ± 0.13

SW: 0.050 ± 0.005 1.27 ± 0.13

LL: 1.000 ± 0.125

LS: 0.650 ± 0.020 16.51 ± 0.51 (0.7 ± 0.05)

4.06 max.

20.83 max.

10.49 max.

(0.138)

(0.890)

(0.413)

S105D

(S105F) ⁽¹⁾

0.8 W

0.4 W

S105K

S106D

S106K

over 300K

25.4 ± 3.18

2.0 W

1.0 W

W: 0.260 max.

L: 1.200 max.

H: 0.413 max.

ST: 0.035 ± 0.005 0.889 ± 0.13

SW: 0.050 ± 0.005 1.27 ± 0.13

6.60 max.

30.48 max.

10.49 max.

up to 400K

0.5 W

over 400K

LL: 1.000 ± 0.125

25.4 ± 3.18

LS: 0.900 ± 0.020 22.86 ± 0.51

Notes

(1)

(2)

S104F and S105F have different package dimensions (see the third column of dimensions). All other specifications are the same.

0.200" (5.08 mm) lead spacing available - specify S102J for S102C, and S102L for S102K.

www.vishayfoilresistors.com

For any questions, contact: foil@vishaypg.com

Document Number: 63001

Revision: 29-Jun-11

S Series

Vishay Foil Resistors

FIGURE 3 - POWER DERATING CURVE

FIGURE 4 - TRIMMING TO VALUES

(conceptual illustration)

- 55 °C

+ 70 °C

200 %

175 %

150 %

125 %

100 %

75 %

Double Rated Power

Current Path

Interloop Capacitance

Reduction in Series

Before Trimming

Rated Power

Current Path

After Trimming

Trimming Process

Mutual Inductance

Reduction due

to Change in

Removes this Material

from Shorting Strip Area

Changing Current Path

and Increasing

Current Direction

50 %

25 %

Resistance

0 %

- 75 - 50 - 25

25 50 75 100 125 150 175 200

Ambient Temperature (°C)

Note: Foil shown in black, etched spaces in white

TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON

MIL-PRF-55182

CHAR J

S-SERIES

MAXIMUM ΔR

S-SERIES

TYPICAL ΔR

Test Group I

Thermal shock, 5 x (- 65 °C to + 150 °C)

Short time overload, 6.25 x rated power

Test Group II

± 0.2 %

± 0.01 % (100 ppm)

± 0.002 % (20 ppm)

± 0.003 % (30 ppm)

Resistance temperature characteristics⁽¹⁾

Low temperature storage (24 h at - 65 °C)

± 25 ppm/°C

± 0.15 %

± 6.5 ppm/°C

± 2.0 ppm/°C

± 0.01 % (100 ppm)

± 0.002 % (20 ppm)

Low temperature operation

(45 min, rated power at - 65 °C)

± 0.15 %

± 0.2 %

± 0.01 % (100 ppm)

± 0.002 % (20 ppm)

Terminal strength

Test Group III

Dielectric Withstanding Voltage (DWV)

Resistance to solder heat

Moisture resistance

Test Group IV

± 0.15 %

± 0.1 %

± 0.4 %

± 0.01 % (100 ppm)

± 0.05 % (500 ppm)

± 0.002 % (20 ppm)

± 0.005 % (50 ppm)

± 0.01 % (100 ppm)

Shock

± 0.2 %

± 0.01 % (100 ppm)

± 0.002 % (20 ppm)

Vibration

Test Group V

Life test at 0.3 W/+ 125 °C

2000 h

± 0.5 %

± 2.0 %

± 0.015 % (150 ppm)

± 0.05 % (500 ppm)

± 0.01 % (100 ppm)

± 0.03 % (300 ppm)

10 000 h

Test Group Va

Life test at 0.6 W (2 x rated power)/+ 70 °C, 2000 h

Test Group VI

± 0.5 %

± 2.0 %

5 ppm/V

± 0.015 % (150 ppm)

± 0.1 % (1000 ppm)

< 0.1 ppm/V

± 0.01 % (100 ppm)

± 0.05 % (500 ppm)

< 0.1 ppm/V

High temperature exposure (2000 h at + 175 °C)

Test Group VII

Voltage coefficient

See Table 1.

(1)

Document Number: 63001

Revision: 29-Jun-11

For any questions, contact: foil@vishaypg.com

www.vishayfoilresistors.com

S Series

Vishay Foil Resistors

FIGURE 5 - LONG-TERM STABILITY OVER 29 YEARS (0.1W AT 70°C, 50 SAMPLES S102C,

10KΩ)

-20

-40

-60

-80

-100

-120

Time (Years)

STANDARD OPERATIONS AND TEST

CONDITIONS

A. Standard Test Operations:

IMPROVED PERFORMANCE TESTING (IPT)

The preceding information is based on product directly off

the production line. Improved performance (meaning

increased time stability with load and other stresses) is

available through factory conducted “Improved Performance

Testing”. The test routine is usually tailored to the user’s

stability objectives and IPT-processed resistors can exhibit

improved load-life stability levels of less than 50 ppm.

By 100 % Inspection

•

Short-time overload (6.25 x rated power for 5 s)

Resistance - tolerance check

Visual and mechanical

By Sample Inspection

•

TCR

Various screen test routines are available and all anticipated

stresses must be taken into account before settling on one

specific test routine. VFR's application engineering

department is prepared to discuss and recommend

appropriate routines given the full spectrum of anticipated

stresses and stability requirements.

Environmental tests per table 3 on a quarterly basis to

establish performance by similarity

B. Standard Test Conditions:

•

Lead test point: 0.5" (12.7 mm) from resistor body

Temperature: + 23 °C ± 2 °C

Relative humidity: per MIL-STD-202

TABLE 4 - “S” SERIES SPECIFICATIONS

Stability ⁽¹⁾

Load life at 2000 h

± 0.015 % (150 ppm) Maximum ΔR at 0.3 W/+ 125 °C

± 0.005 % (50 ppm)

± 0.05 % (500 ppm)

± 0.01 % (100 ppm)

0.010 µV

Maximum ΔR at 0.1 W/+ 70 °C

Maximum ΔR at 0.3 W/+ 125 °C

Maximum ΔR at 0.05 W/+ 125 °C

(RMS)/V of applied voltage (- 40 dB)

Load life at 10 000 h

Current Noise

High Frequency Operation

Rise time

1.0 ns at 1 kΩ

Inductance (L) ⁽²⁾

0.1 µH maximum; 0.08 µH typical

1.0 pF maximum; 0.5 pF typical

< 0.1 ppm/V ⁽³⁾

Capacitance (C)

Voltage Coefficient

Thermal Electromotive Force (EMF) ⁽⁴⁾

0.1 µV/°C Maximum; 0.05 µV/°C typical

1 µV/W

(Model S102C)

Notes

(1)

Load life ΔR maximum can be reduced by 80 %, please contact applications engineering department.

(2)

(3)

(4)

Inductance (L) due mainly to the leads.

The resolution limit of existing test equipment (within the measurement capability of the equipment, or “essentially zero”.)

µV/°C relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor.

www.vishayfoilresistors.com

For any questions, contact: foil@vishaypg.com

Document Number: 63001

Revision: 29-Jun-11

S Series

Vishay Foil Resistors

TABLE 5 - GLOBAL PART NUMBER INFORMATION ⁽¹⁾

NEW GLOBAL PART NUMBER: Y000780K5000V9L (preferred part number format)

DENOTES PRECISION

VALUE

CHARACTERISTICS

R = Ω

K = kΩ

M = MΩ

0 = standard

9 = lead (Pb)-free

1 to 999 = custom

PRODUCT CODE

RESISTANCE TOLERANCE

PACKAGING

0007 = S102C

0785 = S102J

0062 = S102K

0786 = S102L

0011 = S104D

5011 = S104F

0101 = S104K

4101 = S104L

0012 = S105D

4012 = S105F

0102 = S105K

4102 = S105L

0013 = S106D

0103 = S106K

V = ± 0.005 %

T = ± 0.01 %

Q = ± 0.02 %

A = ± 0.05 %

B = ± 0.1 %

C = ± 0.25 %

D = ± 0.5 %

F = ± 1.0 %

L = bulk pack

FOR EXAMPLE: ABOVE GLOBAL ORDER Y0007 80K5000 V 9 L:

TYPE: S102C

VALUE: 80.5 kΩ

ABSOLUTE TOLERANCE: ± 0.005 %

TERMINATION: lead (Pb)-free

PACKAGING: bulk pack

HISTORICAL PART NUMBER: S102C T 80K500 V B (will continue to be used)

S102C

80K500

MODEL

TERMINATION

RESISTANCE VALUE

TOLERANCE

PACKAGING

B = bulk pack

S102C

S102J

S102K

S102L

S104D

S104F

S104K

S104L

S105D

S105F

S105K

S105L

S106D

S106K

T = lead (Pb)-free

None = tin/lead alloy

250R00 = 250.00 Ω

5K2310 = 5.231 kΩ

1M000 = 1 MΩ

V = ± 0.005 %

T = ± 0.01 %

Q = ± 0.02 %

A = ± 0.05 %

B = ± 0.1 %

C = ± 0.25 %

D = ± 0.5 %

F = ± 1.0 %

Note

(1)

For non-standard requests, please contact application engineering.

Document Number: 63001

Revision: 29-Jun-11

For any questions, contact: foil@vishaypg.com

www.vishayfoilresistors.com

Legal Disclaimer Notice

Vishay Precision Group

Disclaimer

ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Vishay Precision Group, Inc., its afﬁliates, agents, and employees, and all persons acting on its or their

behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or

incompleteness contained herein or in any other disclosure relating to any product.

The product speciﬁcations do not expand or otherwise modify Vishay Precision Group’s terms and

conditions of purchase, including but not limited to, the warranty expressed therein.

Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms

and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision

Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and

all liability, including without limitation special, consequential or incidental damages, and (iii) any and

all implied warranties, including warranties of ﬁtness for particular purpose, non-infringement and

merchantability.

Information provided in datasheets and/or speciﬁcations may vary from actual results in different

applications and performance may vary over time. Statements regarding the suitability of products for

certain types of applications are based on Vishay Precision Group’s knowledge of typical requirements that

are often placed on Vishay Precision Group products. It is the customer’s responsibility to validate that a

particular product with the properties described in the product speciﬁcation is suitable for use in a particular

application.

No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or

by any conduct of Vishay Precision Group.

The products shown herein are not designed for use in life-saving or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly

indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay

Precision Group for any damages arising or resulting from such use or sale. Please contact authorized

Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for

such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document No.: 63999

Revision: 27-Apr-2011

www.vishaypg.com

S102JT8K2500BB [VISHAY]

相关型号：

S102K

S102K10R7001.0%

S102K12R7001.0%

S102K13R7001.0%

S102K15R6000.25%

S102K16K700CB

S102K17R6000.1%

S102K18R7001.0%

S102K1K47000.05%

S102K1K6700VB

S102K1K87000.5%

S102K1R43001.0%