SA43A-E3/54 [VISHAY]
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN, Transient Suppressor;型号: | SA43A-E3/54 |
厂家: | VISHAY |
描述: | DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN, Transient Suppressor 局域网 二极管 电视 |
文件: | 总6页 (文件大小:100K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SA5.0A thru SA170CA
Vishay General Semiconductor
www.vishay.com
®
TRANSZORB Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
DO-204AC (DO-15)
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VWM
5.0 V to 170 V
TYPICAL APPLICATIONS
V
BR (uni-directional)
6.4 V to 209 V
6.4 V to 209 V
500 W
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
VBR (bi-directional)
PPPM
PD
3.0 W
IFSM (uni-directional only)
TJ max.
70 A
MECHANICAL DATA
175 °C
Case: DO-204AC, molded epoxy over passivated chip
Molding compound meets UL 94 V-0 flammability rating
Polarity
Uni-directional, bi-directional
DO-204AC (DO-15)
Package
Base P/N-E3
- RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
DEVICES FOR BI-DIRECTION APPLICATIONS
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
For bi-directional types, use CA suffix (e.g. SA5.0CA,
SA170CA).
Electrical characteristics apply in both directions.
Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1)
500
See next table
3.0
A
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)
Peak forward surge current 10 ms single half sine-wave uni-directional only
Maximum instantaneous forward voltage at 100 A for uni-directional only (3)
Operating junction and storage temperature range
PD
W
IFSM
70
A
VF
3.5
V
TJ, TSTG
- 55 to + 175
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(2)
Revision: 23-Jan-14
Document Number: 88378
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SA5.0A thru SA170CA
Vishay General Semiconductor
www.vishay.com
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
VOLTAGE
MAXIMUM
MAXIMUM
REVERSE
LEAKAGE
MAXIMUM
CLAMPING
VOLTAGE
AT IPPM
MAXIMUM
TEMPERATURE
COEFFICENT
AT VBR
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
PEAK
PULSE
(1)
VBR AT IT
DEVICE TYPE
(V)
CURRENT
(3)
AT VWM
(2)
(mA)
(V)
IPPM
ID (μA)
VC (V)
(mV/°C)
MIN.
MAX.
(A)
54.3
48.5
44.7
41.7
38.8
36.8
34.7
32.5
29.4
27.5
25.1
23.3
21.6
20.5
19.2
18.1
17.1
15.4
14.1
12.9
11.9
11
10
9.4
8.6
7.8
7.2
6.9
6.5
6.1
5.7
5.3
5.2
4.9
4.4
4.1
4
3.6
SA5.0A (4)
SA6.0A
SA6.5A
SA7.0A
SA7.5A
SA8.0A
SA8.5A
SA9.0A
SA10A
SA11A
SA12A
SA13A
SA14A
SA15A
SA16A
SA17A
SA18A
SA20A
SA22A
SA24A
SA26A
SA28A
SA30A
SA33A
SA36A
SA40A
SA43A
SA45A
SA48A
SA51A
SA54A
SA58A
SA60A
SA64A
SA70A
SA75A
SA78A
SA85A
SA90A
SA100A
SA110A
SA120A
SA130A
SA150A
SA160A
SA170A
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
7.07
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
104
10
10
10
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
600
600
400
150
50
9.2
5
5
5
6
7
7
8
9
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
25
10
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
10
11
12
13
14
16
17
19
20
23
25
28
30
31
36
39
41
46
50
52
56
61
65
70
71
76
85
91
95
103
110
123
133
146
158
184
196
208
113
121
126
137
146
162
177
193
209
243
259
275
85
90
111
123
135
147
159
185
197
209
3.4
3.1
2.8
2.6
2.4
2.1
1.9
1.8
111
122
133
144
167
178
189
100
110
120
130
150
160
170
Notes
(1)
(2)
(3)
(4)
(5)
Pulse test: tp 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
For bi-directional types with VWM of 10 V and less the ID limit is doubled
For the bi-directional SA5.0CA, the maximum VBR is 7.25 V
All terms and symbols are consistent with ANSI/EEE CA62.35
Revision: 23-Jan-14
Document Number: 88378
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SA5.0A thru SA170CA
Vishay General Semiconductor
www.vishay.com
ORDERING INFORMATION (Example)
PREFERRED PIN
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SA5.0A-E3/54
0.432
54
54
4000
4000
13" diameter paper tape and reel
13" diameter paper tape and reel
SA5.0AHE3/54 (1)
0.432
Note
(1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
150
30
TJ = 25 °C
Pulse Width (td)
Non-Repetitive Pulse
Waveform shown in Fig. 3
tr = 10 µs
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
TA = 25 °C
Peak Value
IPPM
10
100
50
IPP
2
Half Value -
IPPM
Impulse
Exponential
Decay
PPK
”0.5”
td
1.0
0.1
PPK
Half Sine
10/1000 µs Waveform
as defined by R.E.A.
td
t
d = 7 tp
PPK
Square
td
td
Current Waveforms
0
0.1 µs
1.0 µs
100 µs
td - Pulse Width
10 ms
10 µs
1.0 ms
1.0
2.0
3.0
4.0
0
t - Time (ms)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 3 - Pulse Waveform
100
200
100
8.3 ms Single Half Sine-Wave
75
50
25
0
10
0
25
50
75
100
125
150 175
200
1
10
100
TJ - Initial Temperature (°C)
Number of Cycles at 60 Hz
Fig. 4 - Maximum Non-Repetitive Forward Surge Current
Fig. 2 - Pulse Derating Curve
Uni-Directional Only
Revision: 23-Jan-14
Document Number: 88378
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SA5.0A thru SA170CA
Vishay General Semiconductor
www.vishay.com
100
4.0
Waveform:
10 x 1000 Impulse
DVC = VC - VBR
60 Hz
Resistive or
Inductive Load
SA170
SA110
SA70
SA40
3.0
2.0
10
1.0
0.1
SA24
SA15
SA9.0
SA5.0
L = 0.375" (9.5 mm)
Lead Lengths
1.0
0
0
25
50
75
100 125
150
175
200
0.5
1
10
IPP - Peak Pulse Current (A)
50
TL - Lead Temperature (°C)
Fig. 5 - Steady State Power Derating Curve
Fig. 8 - Incremental Clamping Voltage Curve Uni-Directional
100
10 000
Waveform:
8 x 20 Impulse
DVC = VC - VBR
SA170
Uni-Directional
Bi-Directional
SA110
SA70
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
VR = 0
SA60
1000
100
10
10
SA40
SA30
SA24
SA15
SA9.0
SA6.5
1.0
0.1
VR = Rated
Stand-Off voltage
0.5
1
10
IPP - Peak Pulse Current (A)
50
5
100
500
VWM - Reverse Stand-Off Voltage (V)
Fig. 6 - Capacitance
Fig. 9 - Incremental Clamping Voltage Curve Bi-Directional
100
10
100
Waveform:
8 x 20 Impulse
DVC = VC - VBR
Waveform:
10 x 1000 Impulse
DVC = VC - VBR
SA170
SA110
SA70
SA170
SA54
SA110
SA70
SA40
10
SA40
SA24
SA30
SA15
SA24
SA18
SA15
SA12
SA5.0
SA9.0
SA9.0
1.0
SA6.5
1.0
0.1
0.1
0.5
1
10
IPP - Peak Pulse Current (A)
50
0.5
1
10
50
IPP - Peak Pulse Current (A)
Fig. 7 - Incremental Clamping Voltage Curve Uni-Directional
Fig. 10 - Incremental Clamping Voltage Curve Bi-Directional
Revision: 23-Jan-14
Document Number: 88378
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SA5.0A thru SA170CA
Vishay General Semiconductor
www.vishay.com
100
200
100
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
20
10
Uni-Directional
Bi-Directional
10
2
1
Uni-Directional Only
0.2
0.1
1.0
5.0
10
100
500
0.5
1
1.5
2
2.5
0
VF - Forward Voltage (V)
VWM - Rated Stand-Off Voltage (V)
Fig. 11 - Typical Instantaneous Forward Voltage
Fig. 12 - Breakdown Voltage Temperature Coefficient Curve
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AC (DO-15)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.300 (7.6)
0.230 (5.8)
0.140 (3.6)
0.104 (2.6)
DIA.
1.0 (25.4)
MIN.
Revision: 23-Jan-14
Document Number: 88378
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
SA43A-E3/73
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
SA43A-GT3
Trans Voltage Suppressor Diode, 500W, 43V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, PLASTIC PACKAGE-2
SENSITRON
SA43A-LF
Trans Voltage Suppressor Diode, 500W, 43V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, ROHS COMPLIANT, PLASTIC PACKAGE-2
WTE
SA43A-T
Trans Voltage Suppressor Diode, 500W, 43V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, PLASTIC PACKAGE-2
DIODES
SA43A-T3
Trans Voltage Suppressor Diode, 500W, 43V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, PLASTIC PACKAGE-2
WTE
SA43A-T3-LF
Trans Voltage Suppressor Diode, 500W, 43V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, ROHS COMPLIANT, PLASTIC PACKAGE-2
WTE
SA43A-TB
Trans Voltage Suppressor Diode, 500W, 43V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, PLASTIC PACKAGE-2
WTE
SA43A-TB-LF
Trans Voltage Suppressor Diode, 500W, 43V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, ROHS COMPLIANT, PLASTIC PACKAGE-2
WTE
SA43A-TP-HF
Trans Voltage Suppressor Diode, 500W, 43V V(RWM), Unidirectional, 1 Element, Silicon, DO-15,
MCC
SA43A/51-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明