SAC10-E3/73 [VISHAY]
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor;型号: | SAC10-E3/73 |
厂家: | VISHAY |
描述: | DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor 局域网 二极管 电视 |
文件: | 总4页 (文件大小:86K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SAC5.0 thru SAC50
Vishay General Semiconductor
www.vishay.com
®
Low Capacitance TRANSZORB Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• 500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
DO-204AC (DO-15)
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
PRIMARY CHARACTERISTICS
VWM
5.0 V to 50 V
VBR
7.6 V to 55.5 V
500 W
PPPM
MECHANICAL DATA
PD
3.0 W
Case: DO-204AC, molded epoxy over passivated body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant and commercial grade
TJ max.
Polarity
Package
175 °C
Uni-directional
DO-204AC (DO-15)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
500
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1)
Peak pulse current with a 10/1000 μs waveform (fig. 3) (1)
Power dissipation on infinite heatsink at TL = 75 °C (fig. 2)
Operating junction and storage temperature range
IPPM
See next table
3.0
A
PD
W
TJ, TSTG
-55 to +175
°C
Note
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Revision: 11-Feb-15
Document Number: 88379
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SAC5.0 thru SAC50
Vishay General Semiconductor
www.vishay.com
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
VOLTAGE
AT
MAXIMUM
REVERSE
LEAKAGE
AT
MAXIMUM MAXIMUM
MAXIMUM
JUNCTION
WORKING
INVERSE
INVERSE
BLOCKING
LEAKAGE
CURRENT
PEAK
STAND-OFF
VOLTAGE (1)
VWM
CLAMPING
VOLTAGE
AT
PEAK
PULSE
INVERSE
BLOCKING
VOLTAGE
PART
NUMBER
IT = 1.0 mA
CAPACITANCE BLOCKING
AT 0 V VOLTAGE
F) WIB (V)
CURRENT
VBR (V)
VWM
(V)
IPP = 5.0 A PER FIG. 3
ID
(μA)
(p
V
V
WIB IIB (mA)
VPIB (V)
VC (V)
IPP (A)
MIN.
SAC5.0
SAC6.0
SAC7.0
SAC8.0
SAC8.5
SAC10
SAC12
SAC15
SAC18
SAC22
SAC26
SAC30
SAC36
SAC45
SAC50
7.60
7.90
5
6
300
300
300
100
50
10.0
11.2
12.6
13.4
14.0
16.3
19.0
23.6
28.8
35.4
42.3
48.6
60.0
77.0
88.0
44
41
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
75
75
75
75
75
75
75
75
75
75
75
75
75
150
150
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
100
100
100
100
100
100
100
100
100
100
100
100
100
200
200
8.33
7
38
8.89
8
36
9.44
8.5
10
12
15
18
22
26
30
36
45
50
34
11.10
13.30
16.70
20.00
24.40
28.90
33.30
40.00
50.00
55.50
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
29
25
20
15
14
11.1
10.0
8.6
6.8
5.8
Note
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
ORDERING INFORMATION (Example)
PREFERRED PIN
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SAC5.0-E3/54
0.432
54
4000
13" diameter paper tape and reel
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
100
75
50
25
0
Current Waveforms
Power Dissipation
Impulse
Exponential
Decay
PPK
“0.5”
td
PPK
Half Sine
td
10
Peak Power (Single Pulse)
TJ = Initial Temperature
td = 7 tp
Square
PPK
td
1
L = 0.375" (9.5 mm)
Lead Lengths
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
0
25
50
75
100
125
150
175
td - Pulse Width
TL - Lead Temperature (°C)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 2 - Power Derating Curve
Revision: 11-Feb-15
Document Number: 88379
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SAC5.0 thru SAC50
Vishay General Semiconductor
www.vishay.com
150
100
50
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
tr = 10 µs
Peak Value
IPPM
Low Capacitance
TVS
Half Value - IPP
IPPM
2
10/1000 µs Waveform
as defined by R.E.A.
td
Application Note: Device must be used with
two units in parallel, opposite in polarity as
shown in circuit for AC signal line protection.
0
0
1.0
2.0
3.0
4.0
t - Time (ms)
Fig. 3 - Pulse Waveform
Fig. 4 - AC Line Protection Application
SCHEMATIC
Diode
Transient
Voltage
Suppressor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AC (DO-15)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.300 (7.6)
0.230 (5.8)
0.140 (3.6)
0.104 (2.6)
DIA.
1.0 (25.4)
MIN.
Revision: 11-Feb-15
Document Number: 88379
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
SAC10/1-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
SAC10/23
Trans Voltage Suppressor Diode, 500W, 10V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
SAC10/23-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
SAC10/4
Trans Voltage Suppressor Diode, 500W, 10V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
SAC10/51-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
SAC10/54-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
SAC10B
500W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN
LITTELFUSE
SAC10E3
Trans Voltage Suppressor Diode, 500W, 10V V(RWM), Unidirectional, 1 Element, Silicon, DO-41, ROHS COMPLIANT, PLASTIC PACKAGE-2
MICROSEMI
SAC10P
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-15, PLASTIC PACKAGE-2, Transient Suppressor
MCC
©2020 ICPDF网 联系我们和版权申明