SAC5.0-E3/51 [VISHAY]
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN;型号: | SAC5.0-E3/51 |
厂家: | VISHAY |
描述: | Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN |
文件: | 总4页 (文件大小:80K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SAC5.0 thru SAC50
Vishay General Semiconductor
Low Capacitance TRANSZORB® Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• Excellent clamping capability
• 500 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
• Very fast response time
• Low incremental surge resistance
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
DO-204AC (DO-15)
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against
voltage transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of sensor
units for consumer, computer, industrial and
telecommunication.
MAJOR RATINGS AND CHARACTERISTICS
VWM
PPPM
PD
5.0 V to 50 V
500 W
MECHANICAL DATA
Case: DO-204AC, molded epoxy over passivated body
Epoxy meets UL 94V-0 flammability rating
3.0 W
Tj max.
175 °C
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade
Polarity: Color band denotes TVS cathode end
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
PPPM
LIMIT
Minimum 500 (1)
3.0
UNIT
W
Peak pulse power dissipation with a 10/1000 µs waveform
Power dissipation on infinite heatsink at TL = 75 °C (Fig. 2)
Peak pulse power surge current with a 10/1000 µs waveform (Fig. 3)
Operating junction and storage temperature range
PD
W
see next table (1)
IPPM
A
TJ, TSTG
- 55 to + 175
°C
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
Document Number 88379
27-Mar-06
www.vishay.com
1
SAC5.0 thru SAC50
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
MAXIMUM MAXIMUM
REVERSE CLAMPING
LEAKAGE VOLTAGE
MAXIMUM
PEAK
PULSE
CURRENT
PER FIG. 3
MINIMUM
BREAKDOWN
VOLTAGE
WORKING
INVERSE
PEAK
MAXIMUM
JUNCTION
CAPACITANCE
AT 0 VOLTS
(pF)
STAND-OFF
VOLTAGE (1)
VWM
INVERSE BLOCKING INVERSE
BLOCKING LEAKAGE BLOCKING
VOLTAGE CURRENT VOLTAGE
PART
NUMBER
AT
AT
AT IT = 1.0 mA
VWM
IPP = 5.0 A
(V)
VWIB (V)
V
WIB IIB (mA)
VPIB (V)
V(BR) (V)
IPP (A)
ID (µA)
300
300
300
100
50
VC (V)
10.0
11.2
12.6
13.4
14.0
16.3
19.0
23.6
28.8
35.4
42.3
48.6
60.0
77.0
88.0
SAC5.0
SAC6.0
SAC7.0
SAC8.0
SAC8.5
SAC10
SAC12
SAC15
SAC18
SAC22
SAC26
SAC30
SAC36
SAC45
SAC50
5
6
7.60
7.90
44
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
75
75
75
75
75
75
75
75
75
75
75
75
75
150
150
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
100
100
100
100
100
100
100
100
100
100
100
100
100
200
200
41
7
8.33
38
8
8.89
36
8.5
10
12
15
18
22
26
30
36
45
50
9.44
34
11.10
13.30
16.70
20.00
24.40
28.90
33.30
40.00
50.00
55.50
5.0
29
5.0
25
5.0
20
5.0
15
5.0
14
5.0
11.1
10.0
8.6
6.8
5.8
5.0
5.0
5.0
5.0
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
ORDERING INFORMATION
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SAC5.0-E3/54
0.432
54
4000
13" Diameter Paper Tape & Reel
RATINGS AND CHARACTERISTICS CURVES
(T = 25 °C unless otherwise noted)
A
100
75
30
Power Dissipation
Non-repetitive Pulse
Waveform shown in Fig. 3
= 25 °C
TA
10
Peak Power (single pulse)
TJ
= Initial Temperature
Impulse
Exponential
Decay
50
25
0
P
".5"
PK
t
d
1.0
0.1
L = 0.375" (9.5 mm)
Lead Lengths
P
PK
Half Sine
t
d
t
d
= 7 tp
Square
Current Waveforms
P
PK
t
d
10 µs
td, Pulse Width
0.1 µs
1.0 µs
100 µs
10 ms
1.0 ms
0
50
100
150
175
T
L
- Lead Temperature (°C)
Figure 1. Peak Pulse Power Rating Curve
Figure 2. Power Derating Curve
www.vishay.com
2
Document Number 88379
27-Mar-06
SAC5.0 thru SAC50
Vishay General Semiconductor
150
TJ = 25 °C
Pulse Width (td)
is defined as the point
where the peak current
decays to 50 % of IPPM
tr = 10 µsec.
Peak Value
IPPM
100
50
0
Low Capacitance
TVS
IPP
2
Half Value -
I
PPM
10/1000 µsec. Waveform
as defined by R.E.A.
td
Application Note: Device must be used
with two units in parallel, opposite in polarity
as shown in circuit for AC signal line
protection.
1.0
3.0
4.0
0
2.0
t - Time (ms)
Figure 3. Pulse Waveform
Figure 4. AC Line Protection Application
SCHEMATIC
Diode
Transient
Voltage
Suppressor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AC (DO-15)
0.034 (0.86)
0.028 (0.71)
Dia.
1.0 (25.4)
min.
0.300 (7.6)
0.230 (5.8)
0.140 (3.6)
0.104 (2.6)
Dia.
1.0 (25.4)
min.
Document Number 88379
27-Mar-06
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号:
SAC5.0-TP
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, ROHS COMPLIANT, PLASTIC PACKAGE-2
MCC
SAC5.0/1
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
SAC5.0/1-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
SAC5.0/23-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
SAC5.0/4
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
SAC5.0/4-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
SAC5.0P
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-15, PLASTIC PACKAGE-2, Transient Suppressor
MCC
©2020 ICPDF网 联系我们和版权申明