SFH610A-1X001 [VISHAY]
Optocoupler, Phototransistor Output, High Reliability,;
| 型号： | SFH610A-1X001 |
| 厂家： | 
VISHAY |
| 描述： | Optocoupler, Phototransistor Output, High Reliability, |
| 文件： | 总9页 (文件大小：192K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
FEATURES
• Good CTR linearity depending on forward
current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 70 V
• Low saturation voltage
• Fast switching times
E
4
1
2
A
C
• Low CTR degradation
3 C
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
AGENCY APPROVALS
DESCRIPTION
• UL1577, file no. E52744 system code H or J, double
protection
The SFH610A and SFH6106 feature a high current transfer
ratio, low coupling capacitance and high isolation voltage.
These couplers have a GaAs infrared diode emitter, which
is optically coupled to a silicon planar phototransistor
detector, and is incorporated in a plastic DIP-4 or SMD
package.
• DIN EN 60747-5-5 (VDE 0884) available with option 1
• BSI IEC 60950; IEC 60065
• CSA 93751
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6 and option 8. This version complies
with IEC 60950 (DIN VDE 0805) for reinforced insulation up
to an operation voltage of 400 VRMS or DC. Specifications
subject to change.
ORDERING INFORMATION
DIP-6
Option 6
S
F
H
6
1
0
x
-
#
X
0
#
#
T
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
REEL
10.16 mm
Option 8
7.62 mm
Option 7
9.27 mm
> 0.7 mm
AGENCY CERTIFIED/PACKAGE
UL, BSI, CSA
CTR (%)
40 to 80
63 to 125
100 to 200
160 to 320
250 to 500
DIP-4
SFH610A-1
SFH610A-2
SFH610A-3
SFH610A-3X006
SFH6106-3T
SFH610A-3X007T
-
SFH610A-4
-
SFH610A-5
DIP-4, 400 mil
-
SFH610A-2X006
-
SMD-4
SFH6106-1T
SFH6106-2T
SFH6106-4T
-
SFH6106-5T
SMD-4, option 7
SMD-4, 400 mil, option 8
VDE, UL, BSI, CSA (option 1)
DIP-4
-
-
-
-
-
63 to 125
SFH610A-2X001
-
SFH610A-4X008T
160 to 320
SFH610A-4X001
SFH610A-4X016
-
40 to 80
100 to 200
250 to 500
SFH610A-1X001
SFH610A-1X016
SFH610A-3X001
SFH610A-3X016
-
-
-
-
DIP-4, 400 mil
SMD-4
SFH6106-1X001T SFH6106-2X001T SFH6106-3X001T SFH6106-4X001T
SFH610A-1X018T
SMD-4, 400 mil, option 8
-
-
-
Note
For additional information on the available options refer to option information
•
Rev. 2.5, 28-Mar-18
Document Number: 83666
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
DC forward current
Surge forward current
Power dissipation
OUTPUT
VR
IF
6
V
mA
A
60
t ≤ 10 μs
IFSM
Pdiss
2.5
100
mW
Collector emitter voltage
Emitter collector voltage
VCEO
VECO
IC
70
7
V
V
50
mA
mA
mW
Collector current
t
p ≤ 1.0 ms
IC
100
150
Power dissipation
Pdiss
COUPLER
Storage temperature range
Ambient temperature range
Tstg
-55 to +150
-55 to +100
°C
°C
Tamb
max. 10 s, dip soldering distance to
seating plane ≥ 1.5 mm
Soldering temperature (1)
Tsld
260
°C
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1)
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Reverse current
Capacitance
IF = 60 mA
VR = 6 V
VF
IR
-
-
-
-
1.25
0.01
13
1.65
V
μA
10
-
VR = 0 V, f = 1 MHz
CO
Rthja
pF
Thermal resistance
OUTPUT
750
-
K/W
Collector emitter capacitance
Thermal resistance
VCE = 5 V, f = 1 MHz
CCE
Rthja
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
ICEO
-
-
-
-
-
-
-
-
-
-
-
-
5.2
500
2
-
pF
K/W
nA
nA
nA
nA
nA
nA
nA
nA
nA
nA
-
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-5
SFH6106-5
50
2
50
2
50
2
50
5
100
100
100
100
100
100
Collector emitter leakage current
VCE = 10 V
5
5
5
5
5
COUPLER
Collector emitter saturation voltage
Coupling capacitance
IF = 10 mA, IC = 2.5 mA
f = 1 MHz
VCEsat
CC
-
-
0.25
0.4
0.4
-
V
pF
Note
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Rev. 2.5, 28-Mar-18
Document Number: 83666
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
CURRENT TRANSFER RATIO
PARAMETER
TEST CONDITION
PART
SYMBOL
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
MIN.
40
TYP.
-
MAX.
80
80
125
125
200
200
320
320
500
500
-
UNIT
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-5
SFH6106-5
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
-
40
63
-
63
-
100
100
160
160
250
250
13
-
IF = 10 mA, VCE = 5.0 V
-
-
-
-
IC/IF
-
30
30
45
45
70
70
90
90
-
13
-
22
-
22
IF = 1 mA, VCE = 5 V
-
34
34
-
56
-
-
56
SWITCHING CHARACTERISTICS
PARAMETER
NON-SATURATED
Current
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
-
-
-
-
-
-
-
-
-
-
-
-
V
CC = 5 V, RL = 75 Ω
IF
tr
10
2
mA
μs
Rise time
VCC = 5 V, RL = 75 Ω
VCC = 5 V, RL = 75 Ω
VCC = 5 V, RL = 75 Ω
VCC = 5 V, RL = 75 Ω
Fall time
tf
2
μs
Turn-on time
Turn-off time
Cut-off frequency
SATURATED
ton
toff
FCO
3
μs
2.3
250
μs
V
CC = 5 V
kHz
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
IF
IF
IF
IF
-
-
-
-
20
10
10
5
-
-
-
-
mA
mA
mA
mA
Current
SATURATED
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
tr
tr
tr
tr
-
-
-
-
2
3
3
4
-
-
-
-
μs
μs
μs
μs
Rise time
Rev. 2.5, 28-Mar-18
Document Number: 83666
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
SWITCHING CHARACTERISTICS
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-1
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
tf
-
11
-
μs
tf
-
-
-
-
-
-
-
-
-
-
-
14
14
15
3
-
-
-
-
-
-
-
-
-
-
-
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
Fall time
tf
tf
ton
ton
ton
ton
toff
toff
toff
toff
4.2
4.2
6
Turn-on time
18
23
23
25
Turn-off time
Note
•
All values presented are typical values.
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
According to IEC 68 part 1
Insulation group IIIa
SYMBOL
VALUE
UNIT
Climatic classification
55 / 100 / 21
175
Comparative tracking index
CTI
VISO
VISO
VIOTM
VIORM
RIO
Maximum rated withstanding isolation voltage
Tested withstanding isolation voltage
Maximum transient isolation voltage
Maximum repetitive peak isolation voltage
According to UL1577, t = 1 min
According to UL1577, t = 1 s
According to DIN EN 60747-5-5
According to DIN EN 60747-5-5
VIO = 500 V, Tamb = 25 °C
VIO = 500 V, Tamb = 100 °C
4420
5300
10 000
890
VRMS
VRMS
V
V
≥ 1012
≥ 1011
400
Ω
Isolation resistance
RIO
Ω
Output safety power
Input safety current
Input safety temperature
Creepage distance
Clearance distance
Creepage distance
Clearance distance
Insulation thickness
PSO
ISI
mW
mA
°C
275
TSI
175
≥ 7
mm
mm
mm
mm
mm
DIP-4 / SMD-4
≥ 7
≥ 8
DIP-4, 400 mil / SMD-4, 400 mil
≥ 8
DTI
≥ 0.4
Note
•
As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
Rev. 2.5, 28-Mar-18
Document Number: 83666
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
100
1.2
Tamb = 110 °C
T
T
T
T
amb = 75 °C
amb = 25 °C
amb = 0 °C
1.0
0.8
0.6
0.4
0.2
0
10
1
amb = -55 °C
Normalized to CTR value:
IF = 10 mA, VCE = 5 V, Tamb = 25 °C
0.1
0.6
0.8
1.0
1.2
1.4
1.6
-60 -40 -20
0
20 40 60 80 100 120
VF - Forward Voltage (V)
Fig. 1 - Forward Voltage vs. Forward Current
Tamb - Ambient Temperature (°C)
Fig. 4 - Normalized Current Transfer Ratio (non-saturated) vs.
Ambient Temperature
1.2
1.0
0.8
0.6
0.4
55
50
IF = 35 mA
45
IF = 30 mA
40
35
30
25
20
15
10
5
IF = 25 mA
IF = 20 mA
IF = 15 mA
IF = 10 mA
IF = 5 mA
IF = 1 mA
0.2
Normalized to CTR value:
IF = 10 mA, VCE = 5 V, Tamb = 25 °C
0
0
-60 -40 -20
0
20 40 60 80 100 120
0
1
2
3
4
5
6
7
8
9
10
VCE - Collector Emitter Voltage (non-sat) (V)
Tamb - Ambient Temperature (°C)
Fig. 2 - Collector Current vs. Collector Emitter Voltage (NS)
Fig. 5 - Normalized Current Transfer Ratio (saturated) vs.
Ambient Temperature
14
1.4
Tamb = 0 °C
IF = 10 mA
12
1.2
Tamb = -55 °C
Tamb = 25 °C
10
1.0
0.8
0.6
0.4
0.2
0
8
IF = 5 mA
6
Tamb = 75 °C
Tamb = 100 °C
4
IF = 1 mA
IF = 2 mA
Normalized to:
IF = 5 mA, VCE = 5 V,
2
Tamb = 25 °C
0
0
0.1
0.2
0.3
0.4
0.1
1
10
100
VCE - Collector Emitter Voltage (sat.) (V)
IF - Forward Current (mA)
Fig. 3 - Collector Current vs. Collector Emitter Voltage (saturated)
Fig. 6 - Normalized CTR (non-saturated) vs. Forward Current
Rev. 2.5, 28-Mar-18
Document Number: 83666
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
1000
100
10
1.2
1.0
0.8
0.6
0.4
0.2
0
Tamb = 0 °C
Tamb = - 55 °C
VCE = 0.4 V
Normalized to:
IF = 5 mA,
VCE = 5 V, IF = 5 mA
toff (μs)
VCE = 5 V,
Tamb = 25 °C
1
ton (μs)
Tamb = 25 °C
Tamb = 75 °C
Tamb = 100 °C
0.1
0
5
10
15
20
0.1
1
10
100
IF - Forward Current (mA)
RL - Load Resistance (kΩ)
Fig. 10 - Switching Time vs. Load Resistance
Fig. 7 - Normalized CTR (saturated) vs. Forward Current
0.40
0
VCE = 5 V
IF = 10 mA
0.35
-20
RL = 100 Ω
0.30
-40
Ic = 5 mA
0.25
-60
-80
0.20
0.15
0.10
0.05
0
Ic = 2 mA
-100
-120
RL = 1000 Ω
Ic = 1 mA
-140
-160
-60 -40 -20
0
20 40 60 80 100 120
1
10
100
1000
Tamb - Ambient Temperature (°C)
f - Frequency (kHz)
Fig. 8 - Phase Angle vs. Frequency
Fig. 11 - Collector Emitter Voltage vs. Ambient Temperature
(saturated)
1000
VCC = 5 V
100
10
1
0.1
1
10
100
IC (mA)
Fig. 9 - CTR Frequency vs. Collector Current
Rev. 2.5, 28-Mar-18
Document Number: 83666
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in inches (millimeters)
6.81
6.48
Pin 1 identification
4.83
4.55
7.62 typ.
ISO Method A
°
10
0.84
1.14
0.74
0.76
3.81
3.30
6.35
5.84)
4°
typ
3.30
2.79
0.89
0.51
.
0° to 15°
1.32
1.22
0.25 typ.
2.67
2.41
i178027-1
SMD
0.268 (6.81)
0.255 (6.48)
0.190 (4.83)
0.179 (4.55)
PIN 1 IDENTIFICATION
0.030 (0.76)
R
0.010 (0.25)
0.100 (2.54)
0.070 (1.78)
0.060 (1.52)
0.315 (8.00) min.
0.435 (11.05)
0.395 (10.03)
0.375 (9.53)
0.312 (7.92)
0.296 (7.52)
0.045 (1.14)
0.030 (0.76)
0.033 (0.84)
0.029 (0.74)
10 °
0.150 (3.81)
0.130 (3.30)
0.010 (0.25)
0.008 (0.20)
ISO methodA
4° typ.
0.098 (0.249)
0.040 (0.102)
Lead coplanarity
0.004 (0.102) max. (’K’)
0.052 (1.32)
0.048 (1.22)
0.105 (2.67)
0.095 (2.41)
i178029-2
Rev. 2.5, 28-Mar-18
Document Number: 83666
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
Option 7
Option 8
Option 6
0.300 (7.62)
typ.
0.407 (10.36)
0.391 (9.96)
0.300 (7.62)
typ.
0.307 (7.8)
0.291 (7.4)
0.020 (0.50)
0.000 (0.00)
0.150 (3.81)
0.130 (3.30)
0.028 (0.7)
0.180 (4.6)
0.160 (4.1)
0.315 (8.0)
min.
0.365 (9.27)
min.
0.014 (0.35)
0.010 (0.25)
0.472 (12.00)
max.
0.331 (8.4)
min.
0.400 (10.16)
0.430 (10.92)
0.406 (10.3)
max.
18487
Rev. 2.5, 28-Mar-18
Document Number: 83666
8
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
SFH610A-1X016
SFH610A, SFH6106 - Optocoupler, Phototransistor Output, High Reliabilitz, 5300 VRMS
VISHAY
SFH610A-2-X006
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, DIP-4
VISHAY
SFH610A-2-X016
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, DIP-4
VISHAY
SFH610A-2X001
SFH610A, SFH6106 - Optocoupler, Phototransistor Output, High Reliabilitz, 5300 VRMS
VISHAY
SFH610A-2X016
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, 0.400 INCH, ROHS COMPLIANT, PLASTIC, DIP-4
VISHAY
©2020 ICPDF网 联系我们和版权申明