SIE876DF-T1-GE3 [VISHAY]
N-Channel 60-V (D-S) MOSFET; N通道60 -V (D -S )的MOSFET型号: | SIE876DF-T1-GE3 |
厂家: | VISHAY |
描述: | N-Channel 60-V (D-S) MOSFET |
文件: | 总10页 (文件大小:204K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
New Product
SiE876DF
Vishay Siliconix
N-Channel 60-V (D-S) MOSFET
FEATURES
PRODUCT SUMMARY
•
Halogen-free According to IEC 61249-2-21
ID (A)
Definition
TrenchFET® Power MOSFET
Ultra Low Thermal Resistance Using Top-
Exposed PolarPAK® Package for Double-
Sided Cooling
Silicon Package
•
•
VDS (V)
RDS(on) (Ω)
Q
g (Typ.)
Limit
Limit
0.0061 at V = 10 V
GS
60
110
60
51 nC
•
Leadframe-Based New Encapsulated Package
- Die Not Exposed
- Same Layout Regardless of Die Size < 150 V
Low Qgd/Qgs Ratio Helps Prevent Shoot-Through
100 % Rg and UIS Tested
Package Drawing:
www.vishay.com/doc?72945
•
•
PolarPAK
10
D
9
G
8
S
7
6
S
D
6
7
8
9
10
D
• Compliant to RoHS directive 2002/95/EC
APPLICATIONS
•
•
D
Primary Side Switch
Half-Bridge
D
D
5
S
G
G
D
1
G
2
S
3
S
4
D
5
4
3
2
1
S
Top View
Bottom View
Top surface is connected to pins 1, 5, 6, and 10
N-Channel MOSFET
For Related Documents:
www.vishay.com/ppg?64823
Ordering Information: SiE876DF-T1-GE3 (Lead (Pb)-free and Halogen-free)
ABSOLUTE MAXIMUM RATINGS T = 25 °C, unless otherwise noted
A
Parameter
Symbol
Limit
60
20
Unit
VDS
VGS
Drain-Source Voltage
Gate-Source Voltage
V
110 (Silicon Limit)
60a (Package Limit)
TC = 25 °C
C = 70 °C
TA = 25 °C
TA = 70 °C
60a
22b, c
17.9b, c
60
60a
4.3b, c
50
125
125
80
5.2b, c
3.3b, c
Continuous Drain Current (TJ = 150 °C)
ID
T
A
Pulsed Drain Current
IDM
IS
T
C = 25 °C
Continuous Source-Drain Diode Current
TA = 25 °C
IAS
EAS
Single Pulse Avalanche Current
Single Pulse Avalanche Energy
L = 0.1 mH
mJ
W
T
T
C = 25 °C
C = 70 °C
PD
Maximum Power Dissipation
TA = 25 °C
TA = 70 °C
TJ, Tstg
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)d, e
- 55 to 150
°C
260
Notes:
a. Package limited.
b. Surface Mounted on 1" x 1" FR4 board.
c. t = 10 s.
d. See Solder Profile (www.vishay.com/ppg?73257). The PolarPAK is a leadless package. The end of the lead terminal is exposed copper (not
plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not
required to ensure adequate bottom side solder interconnection.
e. Rework Conditions: manual soldering with a soldering iron is not recommended for leadless components.
Document Number: 64823
S09-0862-Rev. A, 18-May-09
www.vishay.com
1
New Product
SiE876DF
Vishay Siliconix
THERMAL RESISTANCE RATINGS
Parameter
Symbol
Typical
20
Maximum
Unit
Maximum Junction-to-Ambienta, b
RthJA
t ≤ 10 s
Steady State
24
1
RthJC (Drain)
RthJC (Source)
°C/W
Maximum Junction-to-Case (Drain Top)
0.8
Maximum Junction-to-Case (Source)a, c
Notes:
a. Surface Mounted on 1" x 1" FR4 board.
2.2
2.7
b. Maximum under Steady State conditions is 68 °C/W.
c. Measured at source pin (on the side of the package).
SPECIFICATIONS T = 25 °C, unless otherwise noted
J
Parameter
Symbol
Test Conditions
Min.
Typ.
Max.
Unit
Static
Drain-Source Breakdown Voltage
VDS Temperature Coefficient
VGS(th) Temperature Coefficient
VDS
ΔVDS/TJ
ΔVGS(th)/TJ
VGS(th)
VGS = 0 V, ID = 250 µA
ID = 250 µA
60
V
70
- 9
mV/°C
Gate-Source Threshold Voltage
Gate-Source Leakage
VDS = VGS , ID = 250 µA
2.5
25
4.4
100
1
V
IGSS
VDS = 0 V, VGS
=
20 V
nA
VDS = 60 V, VGS = 0 V
IDSS
Zero Gate Voltage Drain Current
µA
V
DS = 60 V, VGS = 0 V, TJ = 55 °C
VDS ≥ 5 V, VGS = 10 V
VGS = 10 V, ID = 20 A
10
On-State Drain Currenta
Drain-Source On-State Resistancea
Forward Transconductancea
Dynamicb
ID(on)
A
Ω
S
RDS(on)
gfs
0.0050
30
0.0061
VDS = 15 V, ID = 20 A
Ciss
Coss
Crss
Input Capacitance
3100
480
180
51
VDS = 30 V, VGS = 0 V, f = 1 MHz
Output Capacitance
pF
Reverse Transfer Capacitance
Total Gate Charge
Qg
Qgs
Qgd
Rg
77
VDS = 30 V, VGS = 10 V, ID = 19.8 A
f = 1 MHz
Gate-Source Charge
Gate-Drain Charge
19
nC
15
Gate Resistance
1.1
22
2.2
30
15
40
15
Ω
td(on)
tr
td(off)
tf
Turn-On Delay Time
VDD = 30 V, RL = 3 Ω
ID ≅ 10 A, VGEN = 10 V, Rg = 1 Ω
Rise Time
10
ns
Turn-Off Delay Time
25
Fall Time
10
Drain-Source Body Diode Characteristics
Continuous Source-Drain Diode Current
Pulse Diode Forward Currenta
IS
ISM
VSD
trr
TC = 25 °C
IS = 10 A
60
60
A
Body Diode Voltage
0.8
60
1.2
90
V
Body Diode Reverse Recovery Time
Body Diode Reverse Recovery Charge
Reverse Recovery Fall Time
Reverse Recovery Rise Time
ns
nC
Qrr
ta
135
42
205
IF = 10 A, dI/dt = 100 A/µs, TJ = 25 °C
ns
tb
18
Notes:
a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %
b. Guaranteed by design, not subject to production testing.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
www.vishay.com
2
Document Number: 64823
S09-0862-Rev. A, 18-May-09
New Product
SiE876DF
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
100
20
15
10
5
V
GS
= 10 V thru 7 V
80
60
40
20
0
T
C
= - 55 °C
C
V
GS
= 6 V
T
= 25 °C
T
C
= 125 °C
V
GS
= 5 V
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0
1
2
3
4
5
6
V
DS
- Drain-to-Source Voltage (V)
V
GS
- Gate-to-Source Voltage (V)
Output Characteristics
Transfer Characteristics
4000
3500
3000
2500
2000
1500
1000
500
0.0060
0.0056
0.0052
0.0048
0.0044
0.0040
C
iss
V
GS
= 10 V
C
oss
C
rss
0
0
10
20
30
40
50
60
0
20
40
60
80
100
I
- Drain Current (A)
V
DS
- Drain-to-Source Voltage (V)
D
On-Resistance vs. Drain Current and Gate Voltage
Capacitance
10
1.8
1.6
1.4
1.2
1.0
0.8
0.6
I
= 19.8 A
D
V
DS
= 30 V
8
6
4
2
0
V
GS
= 10 V, I = 20 A
D
V
DS
= 30 V
0
10
20
30
40
50
60
- 50 - 25
0
25
50
75
100 125 150
T
J
- Junction Temperature (°C)
Q
g
- Total Gate Charge (nC)
On-Resistance vs. Junction Temperature
Gate Charge
Document Number: 64823
S09-0862-Rev. A, 18-May-09
www.vishay.com
3
New Product
SiE876DF
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
100
10
1
0.020
I
= 20 A
D
0.015
0.010
0.005
0.000
T
= 125 °C
J
T
J
= 25 °C
T
J
= 150 °C
T
5
= 25 °C
J
0.0
0.2
0.4
0.6
0.8
1.0
1.2
4
6
7
8
9
10
V
SD
- Source-to-Drain Voltage (V)
V
GS
- Gate-to-Source Voltage (V)
Source-Drain Diode Forward Voltage
On-Resistance vs. Gate-to-Source Voltage
4.4
4.0
3.6
3.2
2.8
2.4
2.0
50
40
I
= 250 µA
D
30
20
10
0
- 50 - 25
0
25
50
75
100 125 150
0.01
0.1
1
10
100
1000
T
J
- Temperature (°C)
Time (s)
Threshold Voltage
Single Pulse Power, Junction-to-Ambient
100
100 µs
Limited by R
*
DS(on)
10
1
1 ms
10 ms
100 ms
1 s
0.1
10 s
T
= 25 °C
A
DC
Single Pulse
BVDSS Limited
0.01
0.01
0.1
1
10
100
V
DS
- Drain-to-Source Voltage (V)
* V > minimum V at which R is specified
DS(on)
GS
GS
Safe Operating Area, Junction-to-Ambient
www.vishay.com
4
Document Number: 64823
S09-0862-Rev. A, 18-May-09
New Product
SiE876DF
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
120
100
80
60
40
20
0
140
120
100
80
60
40
20
0
Package Limited
0
25
50
75
100
125
150
25
50
75
100
125
150
T
C
- Case Temperature (°C)
T
C
- Case Temperature (°C)
Power Derating, Junction-to-Case
Current Derating*
* The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper
dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package
limit.
Document Number: 64823
S09-0862-Rev. A, 18-May-09
www.vishay.com
5
New Product
SiE876DF
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
2
1
Duty Cycle = 0.5
0.2
Notes:
0.1
0.1
P
DM
0.05
t
1
t
2
t
t
1
1. Duty Cycle, D =
2
0.02
2. Per Unit Base = R
= 68 °C/W
thJA
(t)
3. T - T = P
Z
JM DM thJA
A
Single Pulse
4. Surface Mounted
0.01
-4
-3
-2
-1
10
10
10
10
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Ambient
1
10
100
600
2
1
Duty Cycle = 0.5
0.2
0.1
0.05
0.1
0.02
Single Pulse
0.01
-4
-3
-2
-1
10
10
10
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Case (Drain Top)
10
1
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?64823.
www.vishay.com
6
Document Number: 64823
S09-0862-Rev. A, 18-May-09
Package Information
Vishay Siliconix
POLARPAK™ OPTION L
Product datasheet/information page contain
links to applicable package drawing.
M4
M4
10
D
9
8
7
6
G
S
S
D
View A
M2
M1
M3
M3
c
D
1
G
2
S
S
4
D
5
3
A
(Top View)
H4
b1
b2
H1
H3
H2 b1
H1
b3
6
D
7
S
8
S
9
G
10
D
θ
θ
P1
Z
D1
D
P1
A
b4
b4
D
5
S
4
S
3
G
2
D
1
0.26
b5
b5
b5
DETAIL Z
View A
(Bottom View)
A
0.20
0.33
0.58
Document Number: 72945
Revision: 11-Aug-08
www.vishay.com
1
Package Information
Vishay Siliconix
MILLIMETERS
INCHES
DIM
A
MIN.
0.75
0.00
0.48
0.41
2.19
0.89
0.23
0.20
6.00
5.74
5.01
4.75
0.23
0.45
0.31
0.45
4.22
1.08
1.37
0.24
4.30
3.43
0.22
0.05
0.15
3.48
0.56
1.20
3.90
0
NOM.
0.80
-
MAX.
0.85
0.05
0.68
0.61
2.39
1.19
0.43
0.30
6.30
6.04
5.31
5.05
-
MIN.
0.030
0.000
0.019
0.016
0.086
0.035
0.009
0.008
0.236
0.226
0.197
0.187
0.009
0.018
0.012
0.018
0.166
0.043
0.054
0.009
0.169
0.135
0.009
0.002
0.006
0.137
0.022
0.047
0.153
0.000
0°
NOM.
0.031
-
MAX.
0.033
0.002
0.027
0.024
0.094
0.047
0.017
0.012
0.248
0.238
0.209
0.199
-
A1
b1
b2
b3
b4
b5
c
0.58
0.51
2.29
1.04
0.33
0.25
6.15
5.89
5.16
4.90
-
0.023
0.020
0.090
0.041
0.013
0.010
0.242
0.232
0.203
0.193
-
D
D1
E
E1
H1
H2
H3
H4
K1
K2
K3
K4
M1
M2
M3
M4
P1
T1
T2
T3
T4
T5
θ
-
0.56
0.51
0.56
4.52
1.18
-
-
0.022
0.020
0.022
0.178
0.046
-
0.41
-
0.016
-
4.37
1.13
-
0.172
0.044
-
-
-
-
-
4.50
3.58
-
4.70
3.73
-
0.177
0.141
-
0.185
0.147
-
-
-
-
-
0.20
3.64
0.76
-
0.25
4.10
0.95
-
0.008
0.143
0.030
-
0.010
0.161
0.037
-
-
-
-
-
0.18
10°
0.36
12°
0.007
10°
0.014
12°
0°
ECN: T-08441-Rev. C, 11-Aug-08
DWG: 5946
Notes
Millimeters govern over inches.
www.vishay.com
2
Document Number: 72945
Revision: 11-Aug-08
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR PolarPAK® Option L and S
7.300
(0.287)
0.510
0.510
(0.020)
(0.020)
0.410
(0.016)
0.955
(0.038)
0.955
(0.038)
0.895
(0.035)
+
0.895
(0.035)
0.580
(0.023)
0.580
(0.023)
2.290
(0.090)
0.510
(0.020)
Recommended Minimum for PolarPAK Option L and S
Dimensions in mm/(Inches)
No External Traces within Broken Lines
Dot indicates Gate Pin (Part Marking)
Return to Index
www.vishay.com
6
Document Number: 73491
Revision: 21-Jan-08
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明