SM15T33AHE3/9AT [VISHAY]
TVS DIODE 28.2V 45.7V DO214AB;型号: | SM15T33AHE3/9AT |
厂家: | VISHAY |
描述: | TVS DIODE 28.2V 45.7V DO214AB 局域网 光电二极管 电视 |
文件: | 总5页 (文件大小:103K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SM15T Series
Vishay General Semiconductor
www.vishay.com
®
Surface Mount TRANSZORB Transient Voltage Suppressors
FEATURES
Available
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional
• 1500 W peak pulse power capability with a
10/1000 μs waveform
Available
SMC (DO-214AB)
• Excellent clamping capability
Cathode
Anode
• Low inductance
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
(unidirectional)
(bidirectional)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
LINKS TO ADDITIONAL RESOURCES
3
D
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3D Models
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
VWM
5.8 V to 188 V
V
BR unidirectional
6.8 V to 220 V
6.8 V to 220 V
1500 W
V
BR bidirectional
PPPM
PD
MECHANICAL DATA
6.5 W
Case: SMC (DO-214AB)
IFSM (uni-directional only)
200 A
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant and commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
TJ max.
150 °C
Polarity
Unidirectional, bidirectional
SMC (DO-214AB)
Package
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional devices use CA suffix (e.g. SM15T12CA).
Electrical characteristics apply in both directions.
(“_X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
APPLICATION NOTES
A 1500 W (SMC) device is normally selected when the threat
of transients is from lightning induced transients, conducted
via external leads or I/O lines. It is also used to protect
against switching transients induced by large coils or
industrial motors. Source impedance at component level in
a system is usually high enough to limit the current within the
peak pulse current (IPP) rating of this series. In an overstress
condition, the failure mode is a short circuit.
Polarity: for unidirectional types the band denotes cathode
end, no marking on bidirectional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
1500
UNIT
W
Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Power dissipation on infinite heatsink at TA = 50 °C
Peak forward surge current 10 ms single half sine-wave uni-directional only (2)
Operating junction and storage temperature range
IPPM
See next table
6.5
A
PD
W
IFSM
200
A
TJ, TSTG
-65 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal
(2)
Revision: 19-Apr-2021
Document Number: 88380
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SM15T Series
Vishay General Semiconductor
www.vishay.com
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
CLAMPING
VOLTAGE
CLAMPING
VOLTAGE
LEAKAGE
CURRENT
DEVICE
MARKING
CODE
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VRM
VOLTAGE
αT
(2)
TYPE (1)
IRM AT VRM
MAX.
V
BR AT IT
(V)
V
C AT IPPM
V
C AT IPPM
(3)
ID
10-4/°C
(10/1000 μs)
(8/20 μs)
(mA)
(V)
(μA)
UNI
BI
MIN. MAX.
(V)
(A)
(V)
(A)
746
690
538
461
368
308
254
234
207
187
169
156
143
83
SM15T6V8A
SM15T7V5A
SM15T10A
SM15T12A
SM15T15A
SM15T18A
SM15T22A
SM15T24A
SM15T27A
SM15T30A
SM15T33A
SM15T36A
SM15T39A
SM15T68A
SM15T100A
SM15T150A
SM15T200A
SM15T220A
GDE7
GDK7
GDT7
GDX7
GEG7
GEM7
GET7
GEV7
GEX7
GFE7
GFG7
GFK7
GFM7
GDE7
BDK7
BDT7
BDX7
GEG7
BEM7
BET7
GEV7
BEX7
BFE7
GFG7
BFK7
BFM7
6.45
7.13
9.50
11.4
14.3
17.1
20.9
22.8
25.7
28.5
31.4
34.2
37.1
64.6
95.0
143
7.14
7.88
10.5
12.6
15.8
18.9
23.1
25.2
28.4
31.5
34.7
37.8
41.0
71.4
105
10
10
5.80
6.40
8.55
10.2
12.8
15.3
18.8
20.5
23.1
25.6
28.2
30.8
33.3
58.1
85.5
128
1000
500
10
10.5
11.3
14.5
16.7
21.2
25.2
30.6
33.2
37.5
41.5
45.7
49.9
53.9
92.0
137
143
13.4
14.5
18.6
21.7
27.2
32.5
39.3
42.8
48.3
53.5
59.0
64.3
69.7
121
5.7
6.1
132
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
103
7.3
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
90.0
71.0
59.5
49.0
45.0
40.0
36.0
33.0
30.0
28.0
16.3
11.0
7.20
5.50
4.60
7.8
8.4
8.8
9.2
9.4
9.6
9.7
9.8
9.9
10.0
10.4
10.6
10.8
10.8
10.8
GGG7 GGG7
GGV7
GHK7
GHR7
GHR8
GGV7
GHK7
GHR7
GHR8
178
56
158
207
265
38
190
210
171
274
353
28
209
231
188
328
388
26
Notes
(1)
(2)
(3)
For bidirectional devices add suffix “CA” instead of “A”
VBR measured after IT applied for 300 μs square wave pulse
For bi-polar devices with VRM = 10 V or under, the IRM limit is doubled
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance, junction to ambient air (1)
SYMBOL
VALUE
75
UNIT
°C/ W
RθJA
Typical thermal resistance, junction to lead
RθJL
15
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SM15T10A-E3/57T
SM15T10A-M3/57T
SM15T10A-E3/9AT
SM15T10A-M3/9AT
SM15T10AHE3_A/H (1)
SM15T10AHM3_A/H (1)
SM15T10AHE3_A/I (1)
SM15T10AHM3_A/I (1)
0.211
0.211
0.211
0.211
57T
9AT
H
850
7" diameter plastic tape and reel
3500
850
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
I
3500
Note
(1)
AEC-Q101 qualified
Revision: 19-Apr-2021
Document Number: 88380
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SM15T Series
Vishay General Semiconductor
www.vishay.com
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
20 000
10 000
100
Measured at
Zero Bias
10
1000
100
10
VR, Measured at
Stand-Off
Voltage, VWM
1
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.31 x 0.31" (8.0 x 8.0 mm)
Copper Pad Areas
Uni-Directional
Bi-Directional
0.1
0.1 µs
1
10
100
400
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
td - Pulse Width (s)
VWM - Reverse Stand-Off Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance Uni-Directional
100
75
100
10
1.0
0.1
50
25
0
0.001
0.01
0.1
1
10
100
1000
0
25
50
75
100 125
150 175
200
TJ - Initial Temperature (°C)
t - Pulse Duration (s)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 5 - Typical Transient Thermal Impedance
150
200
100
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
tr = 10 µs
Peak Value
IPPM
100
50
0
Half Value -
IPPM
IPP
2
10/1000 µs Waveform
as defined by R.E.A.
TJ = TJ max.
8.3 ms Single Half Sine-Wave
td
10
1.0
3.0
4.0
100
0
2.0
1
10
t - Time (ms)
Number of Cycles at 60 Hz
Fig. 3 - Pulse Waveform
Fig. 6 - Maximum Non-Repetitive Forward Surge Current
Unidirectional Use Only
Revision: 19-Apr-2021
Document Number: 88380
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SM15T Series
Vishay General Semiconductor
www.vishay.com
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMC (DO-214AB)
Mounting Pad Layout
Cathode Band
0.185 (4.69)
MAX.
0.126 (3.20)
0.114 (2.90)
0.246 (6.22)
0.220 (5.59)
0.126 (3.20)
MIN.
0.280 (7.11)
0.260 (6.60)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.320 REF.
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.320 (8.13)
0.305 (7.75)
Revision: 19-Apr-2021
Document Number: 88380
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
SM15T33C/9
Trans Voltage Suppressor Diode, 1500W, Bidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
SM15T33CA-E3/57T
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor
VISHAY
SM15T33CA-E3/7T
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, PLASTIC, SMC, 2 PIN, Transient Suppressor
VISHAY
SM15T33CA-E3/9T
DIODE 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, PLASTIC, SMC, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明