SM6T68CA-HE3/52 [VISHAY]

DIODE 600 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN, Transient Suppressor;


型号：	SM6T68CA-HE3/52
厂家：	VISHAY
描述：	DIODE 600 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN, Transient Suppressor 电视
文件：	总5页 (文件大小：97K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SM6T Series

Vishay General Semiconductor

Surface Mount TRANSZORB^®Transient Voltage Suppressors

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• 600 W peak pulse power capability with a

10/1000 µs waveform

• Available inuni-directional and bi-directional

• Excellent clamping capability

• Low inductance

• Meets MSL level 1, per J-STD-020, LF maximum

DO-214AA (SMB)

peak of 260 °C

• Solder dip 260 °C, 40 s

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and

lighting on ICs, MOSFET, signal lines of sensor units

for consumer, computer, industrial, automotive and

telecommunication.

PRIMARY CHARACTERISTICS

V_BR

6.8 V to 220 V

P_PPM

600 W

P_D

5.0 W

_FSM(uni-directional only)

T_Jmax.

100 A

150 °C

MECHANICAL DATA

Case: DO-214AA (SMB)

Molding compound meets UL 94 V-0 flammability

rating

Base P/N-E3 - RoHS compliant, commercial grade

Base P/NHE3 - RoHS compliant, high reliability/

automotive grade (AEC Q101 qualified)

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD22-B102

DEVICES FOR BI-DIRECTION APPLICATIONS

For bi-directional devices use CA suffix (e.g.

SM6T12CA).

Electrical characteristics apply in both directions.

E3 suffix meets JESD 201 class 1A whisker test, HE3

suffix meets JESD 201 class 2 whisker test

Polarity: For uni-directional types the band denotes

cathode end, no marking on bi-directional types

MAXIMUM RATINGS (T = 25 °C unless otherwise noted)

PARAMETER

SYMBOL

P_PPM

I_PPM

VALUE

600

UNIT

Peak pulse power dissipation on 10/1000 µs waveform ⁽¹⁾⁽²⁾(Fig. 1)

Peak power pulse current with a 10/1000 µs waveform ⁽¹⁾(Fig. 3)

Power dissipation on infinite heatsink T_A= 50 °C

See next table

5.0

P_D

Peak forward surge current 10 ms single half sine-wave uni-directional only ⁽²⁾

I_FSM

100

Operating junction and storage temperature range

T_J, T_STG

- 65 to +150

°C

Notes:

(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A= 25 °C per Fig. 2

(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal

Document Number: 88385

Revision: 21-Oct-08

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

SM6T Series

Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)

BREAKDOWN

VOLTAGE

CLAMPING

VOLTAGE

CLAMPING

VOLTAGE

DEVICE

MARKING

CODE

LEAKAGE

STAND-OFF

VOLTAGE

α_T

Max.

0^-4/°C

TEST

CURRENT

(mA)

(3)

(2)

CURRENT

(1)

AT I

V AT I

AT I

(V)

C PP

TYPE

AT V

10/1000 µs

8/20 µs

(V)

(µA)

UNI

KE7

KK7

KT7

KX7

LG7

LM7

LT7

MIN.

6.45

7.13

9.50

11.4

14.3

17.1

20.9

22.8

25.7

28.5

31.4

34.2

37.1

64.6

95.0

143

MAX.

7.14

7.88

10.5

12.6

15.8

18.9

23.1

25.2

28.4

31.5

34.7

37.8

41.0

71.4

105

(V)

(A)

298

276

215

184

147

123

102

SM6T6V8A

SM6T7V5A

SM6T10A

SM6T12A

SM6T15A

SM6T18A

SM6T22A

SM6T24A

SM6T27A

SM6T30A

SM6T33A

SM6T36A

SM6T39A

SM6T68A

SM6T100A

SM6T150A

SM6T200A

SM6T220A

KE7

AK7

AT7

5.80

6.40

8.55

10.2

12.8

15.3

18.8

20.5

23.1

25.6

28.2

30.8

33.3

58.1

85.5

128

1000

500

10.0

5.0

1.0

10.5

11.3

14.5

16.7

21.2

25.2

30.6

33.2

37.5

41.5

45.7

49.9

53.9

92.0

137

57.0

53.0

41.0

36.0

28.0

24.0

20.0

18.0

16.0

14.5

13.1

12.0

11.1

6.50

4.40

2.90

2.20

2.00

13.4

14.5

18.6

21.7

27.2

32.5

39.3

42.8

48.3

53.5

59.0

64.3

69.7

121

5.7

6.1

1.0

7.3

AX7

LG7

BM7

BT7

LV7

7.8

8.4

8.8

9.2

LV7

9.4

LX7

ME7

MG7

MK7

MM7

NG7

NV7

PK7

PR7

PR8

BX7

CE7

MG7

CK7

CM7

NG7

NV7

PK7

PR7

PR8

9.6

9.7

9.8

9.9

10.0

10.4

10.6

10.8

178

22.5

158

207

265

190

210

171

274

353

11.3

10.3

209

231

188

328

388

Notes:

(1) For bi-directional devices add suffix “CA”

(2) V_BRmeasured after I_Tapplied for 300 µs square wave pulse

(3) For bipolar devices with V_R= 10 V or under, the I_Tlimit is doubled

THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)

PARAMETER

SYMBOL

VALUE

UNIT

Thermal resistance, junction to ambient air ⁽¹⁾

R_θJA

100

°C/W

Thermal resistance, junction to leads

R_θJL

Note:

(1) Mounted on minimum recommended pad layout

ORDERING INFORMATION (Example)

PREFERRED P/N

UNIT WEIGHT (g)

PREFERRED PACKAGE CODE

BASE QUANTITY

DELIVERY MODE

SM6T10A-E3/52

0.096

750

3200

750

7" diameter plastic tape and reel

13" diameter plastic tape and reel

7" diameter plastic tape and reel

13" diameter plastic tape and reel

SM6T10A-E3/5B

SM6T10AHE3/52 ⁽¹⁾

SM6T10AHE3/5B ⁽¹⁾

0.096

3200

Note:

(1) Automotive grade AEC Q101 qualified

www.vishay.com

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88385

Revision: 21-Oct-08

SM6T Series

Vishay General Semiconductor

RATINGS AND CHARACTERISTICS CURVES

(T = 25 °C unless otherwise noted)

6000

1000

100

Measured at

Zero Bias

V_R, Measured at

Stand-Off

Voltage V_WM

100

T_J= 25 °C

f = 1.0 MHz

_sig= 50 mVp-p

0.2 x 0.2" (5.0 x 5.0 mm)

Copper Pad Areas

Uni-Directional

Bi-Directional

0.1

0.1 µs

1.0 µs

10 µs

100 µs

1.0 ms

10 ms

100

200

V_WM- Reverse Stand-Off Voltage (V)

t_d- Pulse Width (s)

Figure 1. Peak Pulse Power Rating Curve

Figure 4. Typical Junction Capacitance

100

1.0

0.1

0.001

0.01

0.1

100

1000

100 125

150 175

200

t - Pulse Duration (s)

T_J- Initial Temperature (°C)

Figure 2. Pulse Power or Current vs. Initial Junction Temperature

Figure 5. Typical Transient Thermal Impedance

150

200

100

T_J= 25 °C

Pulse Width (t_d)

is defined as the Point

where the Peak Current

decays to 50 % of I_PPM

8.3 ms Single Half Sine-Wave

Uni-Directional Only

t_r= 10 µs

Peak Value

I_PPM

100

Half Value - I_PP

I_PPM

10/1000 µs Waveform

as defined by R.E.A.

t_d

1.0

3.0

4.0

2.0

100

t - Time (ms)

Number of Cycles at 60 Hz

Figure 3. Pulse Waveform

Figure 6. Maximum Non-Repetitive Peak Forward Surge Current

Document Number: 88385

Revision: 21-Oct-08

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

SM6T Series

Vishay General Semiconductor

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-214AA (SMB)

Mounting Pad Layout

Cathode Band

0.085 (2.159)

MAX.

0.155 (3.94)

0.130 (3.30)

0.086 (2.20)

0.077 (1.95)

0.086 (2.18)

MIN.

0.180 (4.57)

0.160 (4.06)

0.060 (1.52)

MIN.

0.012 (0.305)

0.006 (0.152)

0.220 REF.

0.096 (2.44)

0.084 (2.13)

0.060 (1.52)

0.030 (0.76)

0.008 (0.2)

0 (0)

0.220 (5.59)

0.205 (5.21)

www.vishay.com

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88385

Revision: 21-Oct-08

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Revision: 12-Mar-12

Document Number: 91000

SM6T68CA-HE3/52 [VISHAY]

相关型号：

UL1042

ZXFV201

ZXFV201N14

ZXFV201N14TA

ZXFV201N14TC

ZXFV202E5

ZXFV202N8

ZXFV203N14

ZXFV301N16(1)

ZXFV302N16

ZXFV4089

ZXFV4089N8