SM8S16HE3/2D [VISHAY]
TVS DIODE 16V 28.8V DO218AB;
| 型号： | SM8S16HE3/2D |
| 厂家： | 
VISHAY |
| 描述： | TVS DIODE 16V 28.8V DO218AB 电视 |
| 文件： | 总5页 (文件大小：99K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SM8S10A thru SM8S43A
Vishay General Semiconductor
www.vishay.com
Surface Mount PAR® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Junction passivation optimized design passivated
anisotropic rectifier technology
• TJ = 175 °C capability suitable for high reliability
and automotive requirement
• Available in uni-directional polarity only
• Low leakage current
• Low forward voltage drop
DO-218AB
• High surge capability
• Meets ISO7637-2 surge specification (varied by test
condition)
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VBR
11.1 V to 52.8 V
TYPICAL APPLICATIONS
VWM
10 V to 43 V
6600 W
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting,
especially for automotive load dump protection application.
P
PPM (10 x 1000 μs)
P
PPM (10 x 10 000 μs)
5200 W
PD
8 W
IFSM
700 A
MECHANICAL DATA
Case: DO-218AB
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“X” denotes revision code e.g. A, B, ...)
TJ max.
Polarity
Package
175 °C
Uni-directional
DO-218AB
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: heatsink is anode
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
6600
UNIT
with 10/1000 μs waveform
Peak pulse power dissipation
W
with 10/10 000 μs waveform
5200
Power dissipation on infinite heatsink at TC = 25 °C (fig. 1)
Peak pulse current with 10/1000 μs waveform
PD
8.0
W
A
(1)
IPPM
See next table
700
Peak forward surge current 8.3 ms single half sine-wave
Operating junction and storage temperature range
IFSM
A
TJ, TSTG
-55 to +175
°C
Note
(1)
Non-repetitive current pulse derated above TA = 25 °C
Revision: 06-Dec-2018
Document Number: 88387
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SM8S10A thru SM8S43A
Vishay General Semiconductor
www.vishay.com
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
BREAKDOWN
VOLTAGE
MAXIMUM
REVERSE
LEAKAGE
AT VWM
TJ = 175 °C
ID (μA)
TYPICAL TEMP.
COEFFICIENT
MAXIMUM
REVERSE
LEAKAGE
AT VWM
MAX. PEAK
MAXIMUM
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
PULSE CURRENT CLAMPING
DEVICE
TYPE
VBR (V)
(1)
AT 10/1000 μs
WAVEFORM
(A)
VOLTAGE
AT IPPM
VC (V)
OF VBR
T
(mA)
(V)
MIN. NOM. MAX.
ID (μA)
(%/°C)
SM8S10A 11.1 11.7
SM8S11A 12.2 12.9
SM8S12A 13.3 14.0
SM8S13A 14.4 15.2
SM8S14A 15.6 16.4
SM8S15A 16.7 17.6
SM8S16A 17.8 18.8
SM8S17A 18.9 19.9
SM8S18A 20.0 21.1
SM8S20A 22.2 23.4
SM8S22A 24.4 25.7
SM8S24A 26.7 28.1
SM8S26A 28.9 30.4
SM8S28A 31.1 32.8
SM8S30A 33.3 35.1
SM8S33A 36.7 38.7
SM8S36A 40.0 42.1
SM8S40A 44.4 46.8
SM8S43A 47.8 50.3
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
15
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
250
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
388
363
332
307
284
270
254
239
226
204
186
170
157
145
136
124
114
102
95.1
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
0.069
0.072
0.074
0.076
0.078
0.080
0.081
0.082
0.083
0.085
0.086
0.087
0.088
0.089
0.090
0.091
0.091
0.092
0.093
Notes
•
For all types maximum VF = 1.8 V at IF = 100 A measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses
per minute maximum
(1)
To calculate VBR vs. junction temperature, use the following formula: VBR at TJ = VBR at 25 °C x (1 + T x (TJ - 25))
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
Typical thermal resistance, junction to case
RJC
0.90
°C/W
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
13" diameter plastic tape and reel,
anode towards the sprocket hole
SM8S10AHE3_A/I (1)
2.605 750
I
Note
(1)
AEC-Q101 qualified
Revision: 06-Dec-2018
Document Number: 88387
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SM8S10A thru SM8S43A
Vishay General Semiconductor
www.vishay.com
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
8.0
6.0
4.0
2.0
0
10 000
1000
50
150
200
0
100
10
100
Pulse Width (ms) - ½ IPP Exponential Waveform
Case Temperature (°C)
Fig. 1 - Power Derating Curve
Fig. 4 - Reverse Power Capability
6000
5000
4000
3000
2000
1000
0
100
10
RθJA
RθJC
1
0.1
0.01
50
75
Case Temperature (°C)
150
175
0.01
0.1
1
10
100
25
100
125
t - Pulse Width (s)
Fig. 2 - Load Dump Power Characteristics
Fig. 5 - Typical Transient Thermal Impedance
(10 ms Exponential Waveform)
150
100
50
100 000
10 000
1000
tr = 10 μs
TJ = 25 °C
Pulse Width (td) is
Defined as the Point
Where the Peak Current
Decays to 50 % of IPPM
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Peak Value
IPPM
Measured at Zero Bias
Half Value - IPP
IPPM
2
Measured at Stand-Off
Voltage VWM
td
0
10
30
40
0
20
t - Time (ms)
10
15
20
25
30
35
40
45
VWM - Reverse Stand-Off Voltage (V)
Fig. 3 - Pulse Waveform
Fig. 6 - Typical Junction Capacitance
Revision: 06-Dec-2018
Document Number: 88387
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SM8S10A thru SM8S43A
Vishay General Semiconductor
www.vishay.com
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-218AB
0.628 (16.0)
0.592 (15.0)
0.539 (13.7)
Mounting Pad Layout
0.150 (3.8)
0.126 (3.2)
0.524 (13.3)
0.116 (3.0)
0.093 (2.4)
0.091 (2.3)
0.067 (1.7)
0.413 (10.5) 0.342 (8.7)
0.374 (9.5) 0.327 (8.3)
0.413 (10.5)
0.374 (9.5)
0.116 (3.0)
0.093 (2.4)
0.366 (9.3)
0.343 (8.7)
0.406 (10.3)
0.366 (9.3)
0.343 (8.7)
0.382 (9.7)
Lead 1
0.606 (15.4)
0.583 (14.8)
0.197 (5.0)
0.185 (4.7)
0.138 (3.5)
0.098 (2.5)
0.098 (2.5)
0.059 (1.5)
0.028 (0.7)
0.020 (0.5)
0.016 (0.4) MIN.
Lead 2/Metal Heatsink
Revision: 06-Dec-2018
Document Number: 88387
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
SM8S17-2D
Trans Voltage Suppressor Diode, 5200W, 17V V(RWM), Unidirectional, 1 Element, Silicon, DO-218AB
VISHAY
SM8S17A
Trans Voltage Suppressor Diode, 6600W, 17V V(RWM), Unidirectional, 2 Element, Silicon, TO-263AB, TO-263, D2PAK-3/2
EIC
SM8S17A-2E
Trans Voltage Suppressor Diode, 5200W, 17V V(RWM), Unidirectional, 1 Element, Silicon, DO-218AB, PLASTIC PACKAGE-1
VISHAY
©2020 ICPDF网 联系我们和版权申明