首页 |元器件品牌

SMA5J40CHE3/5A [VISHAY]

Trans Voltage Suppressor Diode, 40V V(RWM), Bidirectional,;
SMA5J40CHE3/5A
型号： SMA5J40CHE3/5A
厂家： VISHAY    VISHAY
描述：

Trans Voltage Suppressor Diode, 40V V(RWM), Bidirectional,

二极管
文件： 总6页 (文件大小：99K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
SMA5J5.0 thru SMA5J40CA  
Vishay General Semiconductor  
High Power Density Surface Mount TRANSZORB®  
Transient Voltage Suppressors  
FEATURES  
• Low profile package  
• Ideal for automated placement  
• Glass passivated chip junction  
• Available inuni-directional and bi-directional  
• Excellent clamping capability  
• Very fast response time  
• Low incremental surge resistance  
• Meets MSL level 1, per J-STD-020, LF maximum  
peak of 260 °C  
DO-214AC (SMA)  
• Solder dip 260 °C, 40 s  
• Component in accordance to RoHS 2002/95/EC  
and WEEE 2002/96/EC  
TYPICAL APPLICATIONS  
PRIMARY CHARACTERISTICS  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching and  
lighting on ICs, MOSFET, signal lines of sensor units  
for consumer, computer, industrial, automotive and  
telecommunication.  
VWM  
5.0 V to 40 V  
PPPM  
500 W  
40 A  
I
FSM (uni-directional only)  
TJ max.  
150 °C  
MECHANICAL DATA  
Case: DO-214AC (SMA)  
Molding compound meets UL 94 V-0 flammability  
rating  
Base P/N-E3 - RoHS compliant, commercial grade  
Base P/NHE3 - RoHS compliant, high reliability/  
automotive grade (AEC Q101 qualified)  
DEVICES FOR BI-DIRECTION APPLICATIONS  
For bi-directional devices use C or CA suffix  
(e.g. SMA5J40CA).  
Electrical characteristics apply in both directions.  
Terminals: Matte tin plated leads, solderable per  
J-STD-002 and JESD22-B102  
E3 suffix meets JESD 201 class 1A whisker test, HE3  
suffix meets JESD 201 class 2 whisker test  
Polarity: For uni-directional types the band denotes  
cathode end, no marking on bi-directional types  
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)  
A
PARAMETER  
SYMBOL  
PPPM  
VALUE  
500  
UNIT  
W
Peak pulse power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1)  
Peak pulse current with a 10/1000 µs waveform (1)  
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)  
Operating junction and storage temperature range  
IPPM  
See next table  
40  
A
IFSM  
A
TJ, TSTG  
- 55 to + 150  
°C  
Notes:  
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2.  
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal  
Document Number: 88875  
Revision: 22-Oct-08  
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
www.vishay.com  
1
SMA5J5.0 thru SMA5J40CA  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)  
A
MAXIMUM  
REVERSE  
LEAKAGE  
MAXIMUM  
PEAK  
PULSE  
MAXIMUM  
CLAMPING  
VOLTAGE AT  
BREAKDOWN  
VOLTAGE  
DEVICE  
MARKING  
CODE  
TEST  
CURRENT  
STAND-OFF  
VOLTAGE  
DEVICE TYPE  
(1)  
V
(V)  
I
V
BR  
T
WM  
AT V  
CURRENT  
I
WM  
PPM  
(mA)  
(V)  
(2)  
(3)  
V (V)  
C
I
(A)  
I
(µA)  
800  
800  
800  
800  
500  
500  
200  
200  
100  
100  
50  
UNI  
BI  
MIN.  
6.40  
6.40  
6.67  
6.67  
7.22  
7.22  
7.78  
7.78  
8.33  
8.33  
8.89  
8.89  
9.44  
9.44  
10.0  
10.0  
11.1  
11.1  
12.2  
12.2  
13.3  
13.3  
14.4  
14.4  
15.6  
15.6  
16.7  
16.7  
17.8  
17.8  
18.9  
18.9  
20.0  
20.0  
22.2  
22.2  
24.4  
24.4  
26.7  
MAX.  
7.82  
7.07  
8.15  
7.37  
8.82  
7.98  
9.51  
8.6  
PPM  
D
SMA5J5.0  
SMA5J5.0A (5)  
SMA5J6.0  
SMA5J6.0A  
SMA5J6.5  
SMA5J6.5A  
SMA5J7.0  
SMA5J7.0A  
SMA5J7.5  
SMA5J7.5A  
SMA5J8.0  
SMA5J8.0A  
SMA5J8.5  
SMA5J8.5A  
SMA5J9.0  
SMA5J9.0A  
SMA5J10  
5AD  
5AE  
5AF  
5AG  
5AH  
5AK  
5AL  
5AM  
5AN  
5AP  
5AQ  
5AR  
5AS  
5AT  
5AD  
5AE  
5AF  
5AG  
5AH  
5AK  
5AL  
5AM  
5AN  
5AP  
5AQ  
5AR  
5AS  
5AT  
10  
10  
5.0  
5.0  
6.0  
6.0  
6.5  
6.5  
7.0  
7.0  
7.5  
7.5  
8.0  
8.0  
8.5  
8.5  
9.0  
9.0  
10  
52.1  
54.3  
43.9  
48.5  
40.7  
44.6  
37.6  
41.7  
35.0  
38.8  
33.3  
36.8  
31.4  
34.7  
29.6  
32.5  
26.6  
29.4  
24.9  
27.5  
22.7  
25.1  
21.0  
23.3  
19.4  
21.6  
18.6  
20.5  
17.4  
19.2  
16.4  
18.1  
15.5  
17.1  
14.0  
15.4  
12.7  
14.1  
11.6  
9.6  
9.2  
10  
11.4  
10.3  
12.3  
11.2  
13.3  
12.0  
14.3  
12.9  
15.0  
13.6  
15.9  
14.4  
16.9  
15.4  
18.8  
17.0  
20.1  
18.2  
22.0  
19.9  
23.8  
21.5  
25.8  
23.2  
26.9  
24.4  
28.8  
26.0  
30.5  
27.6  
32.2  
29.2  
35.8  
32.4  
39.4  
35.5  
43.0  
10  
10  
10  
10  
10  
10.2  
9.21  
10.9  
9.83  
11.5  
10.4  
12.2  
11.1  
13.6  
12.3  
14.9  
13.5  
16.3  
14.7  
17.6  
15.9  
19.1  
17.2  
20.4  
18.5  
21.8  
19.7  
23.1  
20.9  
24.4  
22.1  
27.1  
24.5  
29.8  
26.9  
32.6  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
50  
10  
10  
5AU  
5AV  
5AW  
5AX  
5AY  
5AZ  
5BD  
5BE  
5BF  
5BG  
5BH  
5BK  
5BL  
5BM  
6BN  
5BP  
5BQ  
5BR  
5BS  
5BT  
5BU  
5BV  
5BW  
5BX  
5BY  
5AU  
5AV  
5AW  
5AX  
5AY  
5AZ  
5BD  
5BE  
5BF  
5BG  
5BH  
5BK  
5BL  
5BM  
5BN  
5BP  
5BQ  
5BR  
5BS  
5BT  
5BU  
5BV  
5BW  
5BX  
5BY  
5.0  
5.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
SMA5J10A  
SMA5J11  
10  
11  
SMA5J11A  
SMA5J12  
11  
12  
SMA5J12A  
SMA5J13  
12  
13  
SMA5J13A  
SMA5J14  
13  
14  
SMA5J14A  
SMA5J15  
14  
15  
SMA5J15A  
SMA5J16  
15  
16  
SMA5J16A  
SMA5J17  
16  
17  
SMA5J17A  
SMA5J18  
17  
18  
SMA5J18A  
SMA5J20  
18  
20  
SMA5J20A  
SMA5J22  
20  
22  
SMA5J22A  
SMA5J24  
22  
24  
www.vishay.com  
2
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
Document Number: 88875  
Revision: 22-Oct-08  
SMA5J5.0 thru SMA5J40CA  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)  
A
MAXIMUM  
REVERSE  
LEAKAGE  
MAXIMUM  
PEAK  
MAXIMUM  
CLAMPING  
VOLTAGE AT  
BREAKDOWN  
VOLTAGE  
(1)  
DEVICE  
MARKING  
CODE  
TEST  
CURRENT  
STAND-OFF  
VOLTAGE  
PULSE  
CURRENT  
(2)  
DEVICE TYPE  
V
(V)  
I
V
BR  
T
WM  
AT V  
I
WM  
PPM  
(mA)  
(V)  
(3)  
V (V)  
C
I
(A)  
I
(µA)  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
UNI  
BI  
MIN.  
26.7  
28.9  
28.9  
31.1  
31.1  
33.3  
33.3  
36.7  
36.7  
40.0  
40.0  
44.4  
44.4  
MAX.  
29.5  
35.3  
31.9  
38.0  
34.4  
40.7  
36.8  
44.9  
40.6  
48.9  
44.2  
54.3  
49.1  
PPM  
D
SMA5J24A  
SMA5J26  
SMA5J26A  
SMA5J28  
SMA5J28A  
SMA5J30  
SMA5J30A  
SMA5J33  
SMA5J33A  
SMA5J36  
SMA5J36A  
SMA5J40  
SMA5J40A  
5BZ  
5CD  
5CE  
5CF  
5CG  
5CH  
5CK  
5CL  
5CM  
5CN  
5CP  
5CQ  
5CR  
5BZ  
5CD  
5CE  
5CF  
5CG  
5CH  
5CK  
5CL  
5CM  
5CN  
5CP  
5CQ  
5CR  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
24  
26  
26  
28  
28  
30  
30  
33  
33  
36  
36  
40  
40  
12.9  
10.7  
11.9  
10.0  
11.0  
9.3  
38.9  
46.6  
42.1  
50.0  
45.4  
53.5  
48.4  
59.0  
53.3  
64.3  
58.1  
71.4  
64.5  
10.3  
8.5  
9.4  
7.8  
8.6  
7.0  
7.8  
Notes:  
(1) Pulse test: tp ≤ 50 ms  
(2) Surge current waveform per Fig. 3 and derate per Fig. 2  
(3) For bi-directional types having VWM of 10 V and less, the ID limit is doubled  
(4) All terms and symbols are consistent with ANSI/IEEE C62.35  
(5) For the bi-directional SMA5J5.0CA, the maximum VBR is 7.25 V  
(6) VF = 3.5 V at IF = 25 A (uni-directional only)  
THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)  
A
PARAMETER  
Thermal resistance, junction to ambient (1)  
SYMBOL  
VALUE  
80  
UNIT  
RθJA  
°C/W  
°C/W  
Thermal resistance, junction to leads  
RθJL  
25  
Note:  
(1) Mounted on minimum recommended pad layout  
ORDERING INFORMATION (Example)  
PREFERRED P/N  
SMA5J5.0A-E3/61  
SMA5J5.0A-E3/5A  
SMA5J5.0AHE3/61 (1)  
SMA5J5.0AHE3/5A (1)  
UNIT WEIGHT (g)  
PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
0.064  
61  
5A  
61  
5A  
1800  
7500  
1800  
7500  
7" diameter plastic tape and reel  
13" diameter plastic tape and reel  
7" diameter plastic tape and reel  
13" diameter plastic tape and reel  
0.064  
0.064  
0.064  
Note:  
(1) Automotive grade AEC Q101 qualified  
Document Number: 88875  
Revision: 22-Oct-08  
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
www.vishay.com  
3
SMA5J5.0 thru SMA5J40CA  
Vishay General Semiconductor  
RATINGS AND CHARACTERISTICS CURVES  
(T = 25 °C unless otherwise noted)  
A
100  
10 000  
Non-Repetitive Pulse  
TJ = 25 °C  
f = 1.0 MHz  
Uni-Directional  
Bi-Directional  
Waveform shown in Fig. 3  
TA = 25 °C  
Measured at  
Zero Bias  
10  
1000  
100  
10  
1
Measured at Stand-Off  
Voltage VWM  
0.1  
0.1 µs  
1.0 µs  
10 µs  
100 µs  
1.0 ms  
10 ms  
1
10  
100  
200  
td - Pulse Width (s)  
VWM - Reverse Stand-Off Voltage (V)  
Figure 1. Peak Pulse Power Rating Curve  
Figure 4. Typical Junction Capacitance  
100  
100  
75  
10  
50  
25  
1
0.01  
0
0.1  
1
10  
100  
1000  
0
25  
50  
75  
100 125  
150 175  
200  
tp - Pulse Duration (s)  
TJ - Initial Temperature (°C)  
Figure 2. Pulse Power or Current vs. Initial Junction Temperature  
Figure 5. Typical Transient Thermal Impedance  
150  
200  
TJ = 25 °C  
Pulse Width (td)  
TJ = TJ max.  
tr = 10 µs  
8.3 ms Single Half Sine-Wave  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
Peak Value  
100  
50  
IPPM  
100  
50  
0
Half Value - IPP  
IPPM  
2
10/1000 µs Waveform  
as defined by R.E.A.  
td  
10  
1.0  
3.0  
4.0  
0
2.0  
1
5
10  
50  
100  
t - Time (ms)  
Number of Cycles at 60 Hz  
Figure 3. Pulse Waveform  
Figure 6. Maximum Non-Repetitive Forward Surge Current  
Uni-Directional Only  
www.vishay.com  
4
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
Document Number: 88875  
Revision: 22-Oct-08  
SMA5J5.0 thru SMA5J40CA  
Vishay General Semiconductor  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
DO-214AC (SMA)  
Cathode Band  
Mounting Pad Layout  
0.074 (1.88)  
0.066 (1.68)  
MAX.  
MIN.  
0.110 (2.79)  
0.100 (2.54)  
0.065 (1.65)  
0.049 (1.25)  
0.177 (4.50)  
0.157 (3.99)  
0.060 (1.52)  
0.012 (0.305)  
0.006 (0.152)  
MIN.  
0.208 (5.28)  
REF.  
0.090 (2.29)  
0.078 (1.98)  
0.060 (1.52)  
0.030 (0.76)  
0.008 (0.203)  
0 (0)  
0.208 (5.28)  
0.194 (4.93)  
Document Number: 88875  
Revision: 22-Oct-08  
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
www.vishay.com  
5
Legal Disclaimer Notice  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular  
product with the properties described in the product specification is suitable for use in a particular application. Parameters  
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All  
operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree  
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and  
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay  
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to  
obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Document Number: 91000  
Revision: 11-Mar-11  
www.vishay.com  
1

相关型号：

UL1042

 UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowego

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC

ZXFV201

 QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ZETEX

ZXFV201N14

 IC-SM-VIDEO AMP

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ZETEX

ZXFV201N14TA

 QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ZETEX

ZXFV201N14TC

 QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ZETEX

ZXFV202E5

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC

ZXFV202N8

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC

ZXFV203N14

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC

ZXFV301N16(1)

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC

ZXFV302N16

 IC-SM-4:1 MUX SWITCH

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
ETC
©2020 ICPDF网 联系我们和版权申明