SMA5J7.0CA-E3/5A [VISHAY]
TVS DIODE 7V 12V DO214AC;
| 型号： | SMA5J7.0CA-E3/5A |
| 厂家： | 
VISHAY |
| 描述： | TVS DIODE 7V 12V DO214AC 局域网 光电二极管 电视 |
| 文件： | 总5页 (文件大小：92K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMA5J5.0A thru SMA5J40CA
www.vishay.com
Vishay General Semiconductor
®
High Power Density Surface-Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• Excellent clamping capability
• Very fast response time
Available
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
SMA (DO-214AC)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
3
D
3D Models
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
PRIMARY CHARACTERISTICS
VBR
6.4 V to 49.1 V
VWM
5.0 V to 40 V
500 W
MECHANICAL DATA
PPPM
Case: SMA (DO-214AC)
IFSM (uni-directional only)
TJ max.
40 A
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
150 °C
Polarity
Uni-directional, bi-directional
SMA (DO-214AC)
Package
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g. SMA5J40CA).
Electrical characteristics apply in both directions.
(“_X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
Polarity: for uni-directional types the band denotes cathode
end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
500
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1)
IPPM
See next table
40
A
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Operating junction and storage temperature range
IFSM
A
TJ, TSTG
-55 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
(2)
Revision: 20-Jul-2020
Document Number: 88875
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMA5J5.0A thru SMA5J40CA
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
REVERSE
LEAKAGE
AT VWM
MAXIMUM
MAXIMUM
DEVICEMARKING
CODE
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
VOLTAGE
PEAK PULSE CLAMPING
DEVICE TYPE
V
BR (V) (1)
SURGE
VOLTAGEAT
IPPM
CURRENT
(mA)
(V)
ID (μA) (3)
I
PPM (A) (2)
54.3
48.5
44.6
41.7
38.8
36.8
34.7
32.5
29.4
27.5
25.1
23.3
21.6
20.5
19.2
18.1
17.1
15.4
14.1
12.9
11.9
11.0
10.3
9.4
VC (V)
UNI
BI
MIN.
MAX.
SMA5J5.0A (5)
SMA5J6.0A
SMA5J6.5A
SMA5J7.0A
SMA5J7.5A
SMA5J8.0A
SMA5J8.5A
SMA5J9.0A
SMA5J10A
SMA5J11A
SMA5J12A
SMA5J13A
SMA5J14A
SMA5J15A
SMA5J16A
SMA5J17A
SMA5J18A
SMA5J20A
SMA5J22A
SMA5J24A
SMA5J26A
SMA5J28A
SMA5J30A
SMA5J33A
SMA5J36A
SMA5J40A
5AE
5AG
5AK
5AM
5AP
5AR
5AT
5AV
5AX
5AZ
5BE
5BG
5BK
5BM
5BP
5BR
5BT
5BV
5BX
5BZ
5CE
5CG
5CK
5CM
5CP
5CR
5AE
5AG
5AK
5AM
5AP
5AR
5AT
5AV
5AX
5AZ
5BE
5BG
5BK
5BM
5BP
5BR
5BT
5BV
5BX
5BZ
5CE
5CG
5CK
5CM
5CP
5CR
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
7.07
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
10
10
10
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
800
800
500
200
100
50
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
10
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
8.6
7.8
Notes
(1)
(2)
(3)
(4)
(5)
(6)
Pulse test: tp ≤ 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
For bi-directional types having VWM of 10 V and less, the ID limit is doubled
All terms and symbols are consistent with ANSI/IEEE C62.35
For the bi-directional SMA5J5.0CA, the maximum VBR is 7.25 V
VF = 3.5 V at IF = 25 A (uni-directional only)
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance, junction to ambient (1)
Typical thermal resistance, junction to lead
SYMBOL
VALUE
80
25
UNIT
RθJA
RθJL
°C/ W
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SMA5J5.0A-E3/61
SMA5J5.0A-M3/61
SMA5J5.0A-E3/5A
SMA5J5.0A-M3/5A
SMA5J5.0AHE3_A/H (1)
SMA5J5.0AHM3_A/H (1)
SMA5J5.0AHE3_A/I (1)
SMA5J5.0AHM3_A/I (1)
0.064
0.064
0.064
0.064
61
5A
H
1800
7500
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
I
Note
(1)
AEC-Q101 qualified
Revision: 20-Jul-2020
Document Number: 88875
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMA5J5.0A thru SMA5J40CA
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
10
1
10 000
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
TJ = 25 °C
f = 1.0 MHz
Uni-Directional
Bi-Directional
Measured at
Zero Bias
1000
100
10
Measured at Stand-Off
Voltage VWM
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1
10
100
200
td - Pulse Width (s)
VWM - Reverse Stand-Off Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance
100
100
75
10
50
25
1
0.01
0
0.1
1
10
100
1000
0
25
50
75
100 125
150 175
200
tp - Pulse Duration (s)
TJ - Initial Temperature (°C)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 5 - Typical Transient Thermal Impedance
150
200
TJ = 25 °C
Pulse Width (td)
TJ = TJ max.
tr = 10 µs
8.3 ms Single Half Sine-Wave
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Peak Value
100
50
IPPM
100
50
0
Half Value - IPP
IPPM
2
10/1000 µs Waveform
as defined by R.E.A.
td
10
1.0
3.0
4.0
0
2.0
1
5
10
50
100
t - Time (ms)
Number of Cycles at 60 Hz
Fig. 3 - Pulse Waveform
Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current
Uni-Directional Use Only
Revision: 20-Jul-2020
Document Number: 88875
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMA5J5.0A thru SMA5J40CA
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMA (DO-214AC)
Cathode Band
Mounting Pad Layout
0.074 (1.88)
0.066 (1.68)
MAX.
MIN.
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Revision: 20-Jul-2020
Document Number: 88875
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
SMA5J7.0CA-HE3/5A
DIODE 500 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN, Transient Suppressor
VISHAY
SMA5J7.0CHE3/61
Trans Voltage Suppressor Diode, 500W, 7V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
SMA5J7.5-HE3/5A
500W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
SMA5J7.5A-E3/51
Trans Voltage Suppressor Diode, 500W, 7.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明