SMA5J8.5-E3 [VISHAY]
Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, PLASTIC, SMA, 2 PIN;型号: | SMA5J8.5-E3 |
厂家: | VISHAY |
描述: | Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, PLASTIC, SMA, 2 PIN |
文件: | 总6页 (文件大小:106K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMA5J5.0 thru SMA5J40CA
Vishay General Semiconductor
High Power Density Surface Mount TRANSZORB®
Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020C, LF max peak
of 260 °C
DO-214AC (SMA)
• Solder dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
TYPICAL APPLICATIONS
VWM
5.0 V to 40 V
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
PPPM
500 W
40 A
I
FSM (uni-directional only)
TJ max.
150 °C
MECHANICAL DATA
Case: DO-214AC (SMA)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use C or CA suffix
(e.g. SMA5J40CA).
Electrical characteristics apply in both directions.
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
PPPM
VALUE
500
UNIT
W
Peak pulse power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1)
Peak pulse current with a 10/1000 µs waveform (1)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Operating junction and storage temperature range
IPPM
See next table
40
A
IFSM
A
TJ, TSTG
- 55 to + 150
°C
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2.
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
www.vishay.com
66
Document Number: 88875
Revision: 08-May-07
SMA5J5.0 thru SMA5J40CA
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
MAXIMUM
REVERSE
LEAKAGE
MAXIMUM
PEAK
PULSE
MAXIMUM
CLAMPING
VOLTAGE AT
BREAKDOWN
VOLTAGE
DEVICE
MARKING
CODE
TEST
CURRENT
STAND-OFF
VOLTAGE
DEVICE TYPE
(1)
V
(V)
I
V
BR
T
WM
AT V
CURRENT
I
WM
PPM
(mA)
(V)
(2)
(3)
V (V)
C
I
(A)
I
(µA)
800
800
800
800
500
500
200
200
100
100
50
UNI
BI
MIN
6.40
6.40
6.67
6.67
7.22
7.22
7.78
7.78
8.33
8.33
8.89
8.89
9.44
9.44
10.0
10.0
11.1
11.1
12.2
12.2
13.3
13.3
14.4
14.4
15.6
15.6
16.7
16.7
17.8
17.8
18.9
18.9
20.0
20.0
22.2
22.2
24.4
24.4
26.7
MAX
7.82
7.07
8.15
7.37
8.82
7.98
9.51
8.6
PPM
D
SMA5J5.0
SMA5J5.0A (5)
SMA5J6.0
SMA5J6.0A
SMA5J6.5
SMA5J6.5A
SMA5J7.0
SMA5J7.0A
SMA5J7.5
SMA5J7.5A
SMA5J8.0
SMA5J8.0A
SMA5J8.5
SMA5J8.5A
SMA5J9.0
SMA5J9.0A
SMA5J10
5AD
5AE
5AF
5AG
5AH
5AK
5AL
5AM
5AN
5AP
5AQ
5AR
5AS
5AT
5AD
5AE
5AF
5AG
5AH
5AK
5AL
5AM
5AN
5AP
5AQ
5AR
5AS
5AT
10
10
5.0
5.0
6.0
6.0
6.5
6.5
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
9.0
9.0
10
52.1
54.3
43.9
48.5
40.7
44.6
37.6
41.7
35.0
38.8
33.3
36.8
31.4
34.7
29.6
32.5
26.6
29.4
24.9
27.5
22.7
25.1
21.0
23.3
19.4
21.6
18.6
20.5
17.4
19.2
16.4
18.1
15.5
17.1
14.0
15.4
12.7
14.1
11.6
9.6
9.2
10
11.4
10.3
12.3
11.2
13.3
12.0
14.3
12.9
15.0
13.6
15.9
14.4
16.9
15.4
18.8
17.0
20.1
18.2
22.0
19.9
23.8
21.5
25.8
23.2
26.9
24.4
28.8
26.0
30.5
27.6
32.2
29.2
35.8
32.4
39.4
35.5
43.0
10
10
10
10
10
10.2
9.21
10.9
9.83
11.5
10.4
12.2
11.1
13.6
12.3
14.9
13.5
16.3
14.7
17.6
15.9
19.1
17.2
20.4
18.5
21.8
19.7
23.1
20.9
24.4
22.1
27.1
24.5
29.8
26.9
32.6
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
50
10
10
5AU
5AV
5AW
5AX
5AY
5AZ
5BD
5BE
5BF
5BG
5BH
5BK
5BL
5BM
6BN
5BP
5BQ
5BR
5BS
5BT
5BU
5BV
5BW
5BX
5BY
5AU
5AV
5AW
5AX
5AY
5AZ
5BD
5BE
5BF
5BG
5BH
5BK
5BL
5BM
5BN
5BP
5BQ
5BR
5BS
5BT
5BU
5BV
5BW
5BX
5BY
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
SMA5J10A
SMA5J11
10
11
SMA5J11A
SMA5J12
11
12
SMA5J12A
SMA5J13
12
13
SMA5J13A
SMA5J14
13
14
SMA5J14A
SMA5J15
14
15
SMA5J15A
SMA5J16
15
16
SMA5J16A
SMA5J17
16
17
SMA5J17A
SMA5J18
17
18
SMA5J18A
SMA5J20
18
20
SMA5J20A
SMA5J22
20
22
SMA5J22A
SMA5J24
22
24
Document Number: 88875
Revision: 08-May-07
www.vishay.com
67
SMA5J5.0 thru SMA5J40CA
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
MAXIMUM
REVERSE
LEAKAGE
MAXIMUM
PEAK
MAXIMUM
CLAMPING
VOLTAGE AT
BREAKDOWN
VOLTAGE
(1)
DEVICE
MARKING
CODE
TEST
CURRENT
STAND-OFF
VOLTAGE
PULSE
CURRENT
(2)
DEVICE TYPE
V
(V)
I
V
BR
T
WM
AT V
I
WM
PPM
(mA)
(V)
(3)
V (V)
C
I
(A)
I
(µA)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
UNI
BI
MIN
26.7
28.9
28.9
31.1
31.1
33.3
33.3
36.7
36.7
40.0
40.0
44.4
44.4
MAX
29.5
35.3
31.9
38.0
34.4
40.7
36.8
44.9
40.6
48.9
44.2
54.3
49.1
PPM
D
SMA5J24A
SMA5J26
SMA5J26A
SMA5J28
SMA5J28A
SMA5J30
SMA5J30A
SMA5J33
SMA5J33A
SMA5J36
SMA5J36A
SMA5J40
SMA5J40A
5BZ
5CD
5CE
5CF
5CG
5CH
5CK
5CL
5CM
5CN
5CP
5CQ
5CR
5BZ
5CD
5CE
5CF
5CG
5CH
5CK
5CL
5CM
5CN
5CP
5CQ
5CR
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
24
26
26
28
28
30
30
33
33
36
36
40
40
12.9
10.7
11.9
10.0
11.0
9.3
38.9
46.6
42.1
50.0
45.4
53.5
48.4
59.0
53.3
64.3
58.1
71.4
64.5
10.3
8.5
9.4
7.8
8.6
7.0
7.8
Notes:
(1) Pulse test: tp ≤ 50 ms
(2) Surge current waveform per Fig. 3 and derate per Fig. 2
(3) For bi-directional types having VWM of 10 V and less, the ID limit is doubled
(4) All terms and symbols are consistent with ANSI/IEEE C62.35
(5) For the bi-directional SMA5J5.0CA, the maximum VBR is 7.25 V
(6) VF = 3.5 V at IF = 25 A (uni-directional only)
THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
PARAMETER
Thermal resistance, junction to ambient (1)
SYMBOL
VALUE
80
UNIT
RθJA
°C/W
°C/W
Thermal resistance, junction to leads
RθJL
25
Note:
(1) Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
SMA5J5.0A-E3/61
SMA5J5.0A-E3/5A
SMA5J5.0AHE3/61 (1)
SMA5J5.0AHE3/5A (1)
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.064
61
5A
61
5A
1800
7500
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
0.064
0.064
0.064
Note:
(1) Automotive grade AEC Q101 qualified
www.vishay.com
68
Document Number: 88875
Revision: 08-May-07
SMA5J5.0 thru SMA5J40CA
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(T = 25 °C unless otherwise noted)
A
100
10000
TJ = 25 °C
f = 1.0 MHz
Non-Repetitive Pulse
Waveform shown in Fig. 3
Uni-Directional
Bi-Directional
Measured at
TA = 25 °C
Zero Bias
10
1000
100
10
1
Measured at Stand-Off
Voltage VWM
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1
10
100
200
td - Pulse Width (s)
VWM - Reverse Stand-Off Voltage (V)
Figure 1. Peak Pulse Power Rating Curve
Figure 4. Typical Junction Capacitance
100
100
75
10
50
25
1
0.01
0
0.1
1
10
100
1000
0
25
50
75
100 125
150 175
200
TJ - Initial Temperature (°C)
tp - Pulse Duration (s)
Figure 2. Pulse Power or Current vs. Initial Junction Temperature
Figure 5. Typical Transient Thermal Impedance
150
200
TJ = 25 °C
Pulse Width (td)
TJ = TJ max.
tr = 10 µs
8.3 ms Single Half Sine-Wave
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Peak Value
100
50
IPPM
100
50
0
Half Value - IPP
IPPM
2
10/1000 µs Waveform
as defined by R.E.A.
td
10
1.0
3.0
4.0
0
2.0
1
5
10
50
100
t - Time (ms)
Number of Cycles at 60 Hz
Figure 3. Pulse Waveform
Figure 6. Maximum Non-Repetitive Forward Surge Current
Uni-Directional Only
Document Number: 88875
Revision: 08-May-07
www.vishay.com
69
SMA5J5.0 thru SMA5J40CA
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.074 MAX.
(1.88 MAX.)
0.066 MIN.
(1.68 MIN.)
0.065 (1.65)
0.049 (1.25)
0.110 (2.79)
0.100 (2.54)
0.177 (4.50)
0.157 (3.99)
0.060 MIN.
(1.52 MIN.)
0.012 (0.305)
0.006 (0.152)
0.208
(5.28) REF
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
www.vishay.com
70
Document Number: 88875
Revision: 08-May-07
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
SMA5J8.5-E3/51
Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
SMA5J8.5-E3/63
Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
SMA5J8.5A-E3
DIODE 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, PLASTIC, SMA, 2 PIN, Transient Suppressor
VISHAY
SMA5J8.5A-E3/2G
Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
SMA5J8.5A-E3/51
Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
SMA5J8.5A-E3/63
Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
SMA5J8.5A/61
Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, PLASTIC, SMA, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明