SMA6J12A [VISHAY]
Surface Mount Transient Voltage Suppressors; 表面贴装瞬态电压抑制器
| 型号： | SMA6J12A |
| 厂家： | 
VISHAY |
| 描述： | Surface Mount Transient Voltage Suppressors |
| 文件： | 总5页 (文件大小：101K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
New Product
SMA6J5.0A thru SMA6J28A
Vishay General Semiconductor
Surface Mount Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Available in uni-directional polarity only
• Excellent clamping capability
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 260 °C
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
DO-214AC (SMA)
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
PRIMARY CHARACTERISTICS
VWM
5.0 V to 28 V
600 W
4000 W
4 W
P
PPM (10 x 1000 µs)
P
PPM (8 x 20 µs)
MECHANICAL DATA
Case: DO-214AC (SMA)
P
D at TA = 50 °C
IFSM
50 A
Molding compound meets UL 94 V-0 flammability
rating
TJ max.
150 °C
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
VALUE
UNIT
with 10/1000 µs waveform (1)(2)
with 8/20 µs waveform
600
4000
Peak pulse power dissipation
PPPM
W
with 10/1000 µs waveform (1)(2)
with 8/20 µs waveform
Peak pulse current
IPPM
See next table
A
Power dissipation on infinite heatsink, TA = 50 °C
Peak forward surge current 8.3 ms single half sine-wave
Operating junction and storage temperature range
PD
IFSM
4.0
50
W
A
TJ, TSTG
- 55 to + 150
°C
Notes:
(1) Non-repetitive current pulse, per Fig. 1 and derated above TA = 25 °C per Fig. 2.
(2) Mounted on P.C.B. with 5.0 x 5.0 mm copper pads attached to each terminal
Document Number: 89115
Revision: 30-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
New Product
SMA6J5.0A thru SMA6J28A
Vishay General Semiconductor
I
ELECTRICAL CHARACTERISTICS
IF
SYMBOL
VWM
VBR
VC
PARAMETER
Stand-off voltage
Breakdown voltage
VWM
VBR
VC
Clamping voltage
ID
Leakage current at VWM
Peak pulse current
VF
V
ID
IT
IPP
αT
Voltage temperature coefficient
Forward voltage drop
Dynamic resistance
VF
IPP
RD
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
(2)
(2)
BREAKDOWN
MAXIMUM
REVERSE LEAKAGE
ID AT VWM
VC AT IPP
RD
VC AT IPP
8/20 µs
RD
VOLTAGE
αT (3)
DEVICE
MARKING
CODE
(1)
VBR AT IT
10/1000 µs
DEVICE
MIN.
MAX.
25 °C 85 °C
MAX.
MAX.
MAX.
10-4/°C
5.7
V
mA
10
10
10
1
µA
V
V
A
Ω
V
A
Ω
SMA6J5.0A
SMA6J6.0A
SMA6J6.5A
SMA6J7.5A
SMA6J8.0A
SMA6J8.5A
SMA6J10A
SMA6J11A
SMA6J12A
SMA6J13A
SMA6J15A
SMA6J16A
SMA6J17A
SMA6J18A
SMA6J20A
SMA6J22A
SMA6J24A
SMA6J26A
SMA6J28A
6AE
6AG
6AK
6AP
6AR
6AT
6.40
6.70
7.20
8.33
8.89
9.4
7.07
7.41
7.96
9.21
9.83
10.4
12.3
13.5
14.7
15.9
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
150
600
100
50
375
1500
250
125
50
50
1
5.0
6.0
6.5
7.5
8.0
8.5
10
11
12
13
15
16
17
18
20
22
24
26
28
9.1
65.9
63.2
58.8
50.8
48.0
45.1
38.2
34.8
31.9
29.4
25.4
23.8
22.5
21.2
19.1
17.4
15.9
14.7
13.6
0.031
0.033
0.038
0.051
0.056
0.064
0.089
0.107
0.128
0.153
0.201
0.229
0.259
0.292
0.361
0.437
0.523
0.614
0.704
13.4
13.7
14.5
17.0
18.2
18.7
19.6
21.5
23.5
23.9
27.7
29.5
31.4
33.2
36.8
40.4
44.3
47.9
51.6
298
290
276
235
220
205
184
172
157
147
123
119
111
102
93
0.021
0.022
0.024
0.033
0.038
0.040
0.040
0.047
0.056
0.054
0.075
0.083
0.094
0.109
0.132
0.152
0.185
0.213
0.253
9.5
5.9
6.1
6.5
7.0
7.3
7.8
8.1
8.3
8.4
8.8
8.8
9.0
9.2
9.4
9.5
9.6
9.7
9.8
10.2
11.8
12.5
13.3
15.7
17.2
18.8
20.4
23.6
25.2
26.7
28.3
31.4
34.5
37.8
40.9
44.0
1
20
1
20
6AX
6AZ
6BE
6BG
6BM
6BP
6BR
6BT
6BV
6BX
6BZ
6CE
6CG
11.1
12.2
13.3
14.4
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
1
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
89
1
1
80
1
1
75
1
1
68
Notes:
(1) Pulse test: tp ≤ 50 ms
(2) To calculate maximum clamping voltage at other surge currents, use the following formula
CLmax. = RD x IPP + VBRmax.
(3) To calculate VBR vs. junction temperature, use the following formula
BR at TJ = VBR at 25 °C x (1 + αT x (TJ - 25))
(4) VF = 3.5 V at IF = 25 A, pulse test: 300 µs pulse width
V
V
www.vishay.com
2
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 89115
Revision: 30-Oct-08
New Product
SMA6J5.0A thru SMA6J28A
Vishay General Semiconductor
THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
PARAMETER
Typical thermal resistance, junction to ambient (1)
SYMBOL
VALUE
120
UNIT
°C/W
°C/W
RθJA
Typical thermal resistance, junction to lead
RθJL
25
Note:
(1) Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
SMA6J5.0A-E3/61
SMA6J5.0A-E3/5A
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.064
61
5A
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
0.064
RATINGS AND CHARACTERISTICS CURVES
(T = 25 °C unless otherwise noted)
A
100
10
1
150
100
50
tr = 10 µs
tr = 8 µs
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Peak Value
IPPM
Half Value - IPP
IPPM
2
td = 1000 µs
td = 20 µs
td
0.1
0.1
0
1
10
100
1000
10 000
0
1.0
2.0
t - Time (ms)
3.0
4.0
Pulse Width (µs) - ½ IPP Exponential Waveform
Figure 1. Peak Pulse Power Rating Curve
Figure 3. Pulse Waveform
10 000
1000
100
100
75
50
25
0
Measured at Zero Bias
Measured at Stand-off
Voltage VWM
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
10
100
0
25
50
75 100 125 150 175 200
Reverse Voltage (V)
TJ - Initial Temperature
Figure 2. Pulse Power or Current vs. Initial Junction Temperature
Figure 4. Typical Junction Capacitance
Document Number: 89115
Revision: 30-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
New Product
SMA6J5.0A thru SMA6J28A
Vishay General Semiconductor
100
1000
SMA6J5.0A ~ SMA6J8.0A
TA = 150 °C
10
100
10
SMA6J8.5A ~ SMA6J28A
TA = 150 °C
1
0.1
1
SMA6J5.0A ~ SMA6J28A
TA = 25 °C
0.01
0.1
0.001
0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
0.01
0.1
1
10
100
1000
Reverse Voltage (V)
t - Pulse Duration (s)
Figure 5. Typical Forward Characteristics
Figure 6. Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.074 (1.88)
0.066 (1.68)
MAX.
MIN.
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
0.012 (0.305)
0.006 (0.152)
MIN.
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
www.vishay.com
4
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 89115
Revision: 30-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号：
SMA6J12CA-TP
Trans Voltage Suppressor Diode, 600W, 12V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
MCC
©2020 ICPDF网 联系我们和版权申明