SMB10J12HE3/52 [VISHAY]
Trans Voltage Suppressor Diode, 12V V(RWM), Unidirectional,;型号: | SMB10J12HE3/52 |
厂家: | VISHAY |
描述: | Trans Voltage Suppressor Diode, 12V V(RWM), Unidirectional, 二极管 |
文件: | 总6页 (文件大小:97K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMB10(8)J5.0(C)A thru SMB10(8)J40(C)A
www.vishay.com
Vishay General Semiconductor
®
High Power Density Surface Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DO-214AA (SMB)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
PRIMARY CHARACTERISTICS
VBR (uni-directional)
6.4 V to 49.1 V
V
BR (bi-directional)
VWM
6.4 V to 49.1 V
5.0 V to 40 V
1000 W
MECHANICAL DATA
Case: DO-214AA (SMBJ)
Molding compound meets UL 94 V-0 flammability rating
P
PPM (uni-directional)
Base P/N-E3
-
RoHS-compliant, commercial grade
PPPM (bi-directional)
800 W
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
PD
100 W
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
I
FSM (uni-directional only)
100 A
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
TJ max.
150 °C
Polarity
Uni-directional, bi-directional
DO-214AA (SMBJ)
Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
Package
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
1000
UNIT
uni-directional
Peak pulse power dissipation
PPPM
W
with a 10/1000 μs waveform (1)(2) (fig. 1)
bi-directional
800
Peak pulse current with a 10/1000 μs waveform (1)
IPPM
PD
See next table
100
A
W
°C
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Operating junction and storage temperature range
TJ, TSTG
- 55 to 150
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
(2)
Revision: 12-Nov-12
Document Number: 88422
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMB10(8)J5.0(C)A thru SMB10(8)J40(C)A
www.vishay.com
UNI-DIRECTIONAL
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
PEAK
MAXIMUM
REVERSE
LEAKAGE
AT VWM
MAXIMUM
CLAMPING
VOLTAGE
AT IPPM
VOLTAGE
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
DEVICE
MARKING
CODE
(1)
DEVICE
TYPE
V
BR AT IT
(V)
PULSE SURGE
CURRENT
(2)
(mA)
(V)
IPPM
ID (μA)
VC (V)
MIN.
MAX.
(A)
108.7
97.1
89.3
83.3
77.5
73.5
69.4
64.9
58.8
54.9
50.3
46.5
43.1
41.0
38.5
36.2
34.2
30.9
28.2
25.7
23.8
22.0
20.7
18.8
17.2
15.5
SMB10J5.0A
SMB10J6.0A
SMB10J6.5A
SMB10J7.0A
SMB10J7.5A
SMB10J8.0A
SMB10J8.5A
SMB10J9.0A
SMB10J10A
SMB10J11A
SMB10J12A
SMB10J13A
SMB10J14A
SMB10J15A
SMB10J16A
SMB10J17A
SMB10J18A
SMB10J20A
SMB10J22A
SMB10J24A
SMB10J26A
SMB10J28A
SMB10J30A
SMB10J33A
SMB10J36A
SMB10J40A
1AE
1AG
1AK
1AM
1AP
1AR
1AT
1AV
1AX
1AZ
1BE
1BG
1BK
1BM
1BP
1BR
1BT
1BV
1BX
1BZ
1CE
1CG
1CK
1CM
1CP
1CR
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
7.07
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
10
10
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
1000
1000
500
200
100
50
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
10
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
20
10
5.0
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Notes
(1)
(2)
(3)
(4)
Pulse test: tp 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
All terms and symbols are consistent with ANSI/IEEE C62.35
VF = 3.5 V at IF = 50 A (uni-directional only)
Revision: 12-Nov-12
Document Number: 88422
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMB10(8)J5.0(C)A thru SMB10(8)J40(C)A
www.vishay.com
BI-DIRECTIONAL
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
PEAK
MAXIMUM
REVERSE
LEAKAGE
MAXIMUM
CLAMPING
VOLTAGE
AT IPPM
VOLTAGE
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
DEVICE
MARKING
CODE
(1)
DEVICE
TYPE
V
BR AT IT
(V)
PULSE SURGE
CURRENT
(3)
AT VWM
(2)
(mA)
(V)
IPPM
(A)
ID (μA)
VC (V)
MIN.
MAX.
SMB8J5.0CA
SMB8J6.0CA
SMB8J6.5CA
SMB8J7.0CA
SMB8J7.5CA
SMB8J8.0CA
SMB8J8.5CA
SMB8J9.0CA
SMB8J10CA
SMB8J11CA
SMB8J12CA
SMB8J13CA
SMB8J14CA
SMB8J15CA
SMB8J16CA
SMB8J17CA
SMB8J18CA
SMB8J20CA
SMB8J22CA
SMB8J24CA
SMB8J26CA
SMB8J28CA
SMB8J30CA
SMB8J33CA
SMB8J36CA
SMB8J40CA
1AE
1AG
1AK
1AM
1AP
1AR
1AT
1AV
1AX
1AZ
1BE
1BG
1BK
1BM
1BP
1BR
1BT
1BV
1BX
1BZ
1CE
1CG
1CK
1CM
1CP
1CR
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
7.25
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
10
10
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
2000
2000
1000
400
200
100
40
87.0
77.7
71.4
66.7
62.0
58.8
55.6
51.9
47.1
44.0
40.2
37.2
34.5
32.8
30.8
29.0
27.4
24.7
22.5
20.6
19.0
17.6
16.5
15.0
13.8
12.4
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
10
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
20
10
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Notes
(1)
(2)
(3)
Pulse test: tp 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
All terms and symbols are consistent with ANSI/IEEE C62.35
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
Typical thermal resistance, junction to ambient (1)
Typical thermal resistance, junction to lead
RJA
72
20
°C/ W
RJL
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SMB10J5.0A-E3/52
SMB10J5.0A-E3/5B
SMB10J5.0AHE3/52 (1)
SMB10J5.0AHE3/5B (1)
0.106
0.106
0.106
0.106
52
5B
52
5B
750
3200
750
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
3200
Note
(1)
AEC-Q101 qualified
Revision: 12-Nov-12
Document Number: 88422
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMB10(8)J5.0(C)A thru SMB10(8)J40(C)A
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
10 000
Measured at
Zero Bias
10
1000
SMB10J5.0 -
SMB10J40A
VR, Measured at
Stand-Off
Voltage VWM
1
100
10
SMB8J5.0C -
SMB8J40CA
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.2 x 0.2" (5.0 x 5.0 mm)
Copper Pad Areas
Bi-Directional
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1
10
100 200
td - Pulse Width (s)
VWM - Reverse Stand-Off Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance
100
75
100
50
10
25
0
1.0
0
25
50
75
100 125
150 175
200
0.01
0.1
1
10
100
1000
TJ - Initial Temperature (°C)
tp - Pulse Duration (s)
Fig. 5 - Typical Transient Thermal Impedance
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
200
100
150
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
8.3 ms Single Half Sine-Wave
Uni-Directional Only
tr = 10 µs
Peak Value
IPPM
100
50
0
Half Value - IPP
IPPM
2
10/1000 µs Waveform
as defined by R.E.A.
td
10
1
10
100
1.0
3.0
4.0
0
2.0
Number of Cycles at 60 Hz
t - Time (ms)
Fig. 6 - Maximum Non-Repetitive Forward Surge Current
Fig. 3 - Pulse Waveform
Revision: 12-Nov-12
Document Number: 88422
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMB10(8)J5.0(C)A thru SMB10(8)J40(C)A
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AA (SMB)
Mounting Pad Layout
Cathode Band
0.085 (2.159)
MAX.
0.155 (3.94)
0.130 (3.30)
0.086 (2.20)
0.077 (1.95)
0.086 (2.18)
MIN.
0.180 (4.57)
0.160 (4.06)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.220 REF.
0.096 (2.44)
0.084 (2.13)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.220 (5.59)
0.205 (5.21)
Revision: 12-Nov-12
Document Number: 88422
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
SMB10J13-HE3/52
1000W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN
VISHAY
SMB10J13-HE3/5B
Trans Voltage Suppressor Diode, 1000W, 13V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN
VISHAY
SMB10J13A-E3
DIODE 1000 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AA, PLASTIC, SMB, 2 PIN, Transient Suppressor
VISHAY
SMB10J13A-E3/2C
Trans Voltage Suppressor Diode, 1000W, 13V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明