SMBG51AHE3 [VISHAY]

Surface Mount TRANSZORB Transient Voltage Suppressors;


型号：	SMBG51AHE3
厂家：	VISHAY
描述：	Surface Mount TRANSZORB Transient Voltage Suppressors
文件：	总5页 (文件大小：96K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMBG5.0A thru SMBG188CA

www.vishay.com

Vishay General Semiconductor

Surface Mount TRANSZORB

Transient Voltage Suppressors

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• 600 W peak pulse power capability with a

10/1000 μs waveform, repetitive rate

(duty cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

DO-215AA (SMBG)

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak of

260 °C

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

PRIMARY CHARACTERISTICS

V_WM

5.0 V to 188 V

_BR(uni-directional)

6.4 V to 231 V

600 W

TYPICAL APPLICATIONS

_BR(bi-directional)

P_PPM

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, automotive, and telecommunication.

_FSM(uni-directional only)

100 A

T_Jmax.

150 °C

Polarity

Uni-directional, bi-directional

DO-215AA (SMBG)

MECHANICAL DATA

Case: DO-215AA (SMBG)

Package

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3

RoHS-compliant, commercial grade

Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

DEVICES FOR BI-DIRECTION APPLICATIONS

For bi-directional devices use CA suffix (e.g. SMBG10CA).

Electrical characteristics apply in both directions.

Polarity: For uni-directional types the band denotes

cathode end, no marking on bi-directional types

MAXIMUM RATINGS (T_A= 25 °C unless otherwise noted)

PARAMETER

SYMBOL

P_PPM

VALUE

600

UNIT

Peak pulse power dissipation with a 10/1000 μs waveform ⁽¹⁾⁽²⁾(fig. 1)

Peak pulse current with a 10/1000 μs waveform ⁽¹⁾

I_PPM

See next table

100

Peak forward surge current 8.3 ms single half sine-wave uni-directional only ⁽²⁾

Operating junction and storage temperature range

I_FSM

T_J, T_STG

- 55 to + 150

°C

Notes

(1)

Non-repetitive current pulse, per fig. 3 and derated above T_A= 25 °C per fig. 2.

Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal

(2)

Revision: 12-Nov-12

Document Number: 88456

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMBG5.0A thru SMBG188CA

www.vishay.com

Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (T_A= 25 °C unless otherwise noted)

BREAKDOWN

MAXIMUM

REVERSE

LEAKAGE

AT V_WM

MAXIMUM

TEST

CURRENT

I_T

STAND-OFF

VOLTAGE

V_WM

DEVICEMARKING

CODE

VOLTAGE

DEVICE TYPE

MODIFIED

GULL WING

PEAK PULSE CLAMPING

(1)

_BRAT I_T

(V)

SURGE

VOLTAGEAT

I_PPM

CURRENT

(mA)

(V)

I_D(μA) ⁽³⁾

_PPM(A) ⁽²⁾

V_C(V)

UNI

MIN.

MAX.

⁽⁺⁾SMBG5.0A ⁽⁵⁾

⁽⁺⁾SMBG6.0A

⁽⁺⁾SMBG6.5A

⁽⁺⁾SMBG7.0A

⁽⁺⁾SMBG7.5A

⁽⁺⁾SMBG8.0A

⁽⁺⁾SMBG8.5A

⁽⁺⁾SMBG9.0A

⁽⁺⁾SMBG10A

⁽⁺⁾SMBG11A

⁽⁺⁾SMBG12A

⁽⁺⁾SMBG13A

⁽⁺⁾SMBG14A

⁽⁺⁾SMBG15A

⁽⁺⁾SMBG16A

⁽⁺⁾SMBG17A

⁽⁺⁾SMBG18A

⁽⁺⁾SMBG20A

⁽⁺⁾SMBG22A

⁽⁺⁾SMBG24A

⁽⁺⁾SMBG26A

⁽⁺⁾SMBG28A

⁽⁺⁾SMBG30A

⁽⁺⁾SMBG33A

⁽⁺⁾SMBG36A

⁽⁺⁾SMBG40A

⁽⁺⁾SMBG43A

⁽⁺⁾SMBG45A

⁽⁺⁾SMBG48A

⁽⁺⁾SMBG51A

⁽⁺⁾SMBG54A

⁽⁺⁾SMBG58A

⁽⁺⁾SMBG60A

⁽⁺⁾SMBG64A

⁽⁺⁾SMBG70A

⁽⁺⁾SMBG75A

⁽⁺⁾SMBG78A

⁽⁺⁾SMBG85A

⁽⁺⁾SMBG90A

⁽⁺⁾SMBG100A

⁽⁺⁾SMBG110A

⁽⁺⁾SMBG120A

⁽⁺⁾SMBG130A

⁽⁺⁾SMBG150A

⁽⁺⁾SMBG160A

⁽⁺⁾SMBG170A

SMBG188A

6.40

6.67

7.22

7.78

8.33

8.89

9.44

10.0

11.1

12.2

13.3

14.4

15.6

16.7

17.8

18.9

20.0

22.2

24.4

26.7

28.9

31.1

33.3

36.7

40.0

44.4

47.8

50.0

53.3

56.7

60.0

64.4

66.7

71.1

77.8

83.3

86.7

94.4

100

7.07

7.37

7.98

8.60

9.21

9.83

10.4

11.1

12.3

13.5

14.7

15.9

17.2

18.5

19.7

20.9

22.1

24.5

26.9

29.5

31.9

34.4

36.8

40.6

44.2

49.1

52.8

55.3

58.9

62.7

66.3

71.2

73.7

78.6

86.0

92.1

95.8

104

5.0

6.0

6.5

7.0

7.5

8.0

8.5

9.0

800

500

200

100

65.2

58.3

53.6

50.0

46.5

44.1

41.7

39.0

35.3

33.0

30.2

27.9

25.9

24.6

23.1

21.7

20.5

18.5

16.9

15.4

14.3

13.2

12.4

11.3

10.3

9.3

8.6

8.3

7.8

7.3

6.9

6.4

6.2

5.8

5.3

5.0

4.8

4.4

4.1

3.7

3.4

3.1

9.2

10.3

11.2

12.0

12.9

13.6

14.4

15.4

17.0

18.2

19.9

21.5

23.2

24.4

26.0

27.6

29.2

32.4

35.5

38.9

42.1

45.4

48.4

53.3

58.1

64.5

69.4

72.7

77.4

82.4

87.1

93.6

96.8

103

1.0

5.0

1.0

113

121

126

137

146

162

177

193

209

243

259

275

111

123

135

147

159

185

197

209

111

122

133

144

167

178

189

209

100

110

120

130

150

160

170

188

2.9

2.5

2.3

2.2

231

2.0

328

Notes

(1)

(2)

(3)

(4)

(5)

(6)

(+)

Pulse test: t_p 50 ms

Surge current waveform per fig. 3 and derate per fig. 2

For bi-directional types having V_WMof 10 V and less, the I_Dlimit is doubled

All terms and symbols are consistent with ANSI/IEEE C62.35

For the bi-directional SMBG/SMBJ5.8CA, the maximum V_BRis 7.25 V

V_F= 3.5 V at I_F= 50 A (uni-directional only)

Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number

E136766 for both uni-directional and bi-directional devices

Revision: 12-Nov-12

Document Number: 88456

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMBG5.0A thru SMBG188CA

www.vishay.com

Vishay General Semiconductor

THERMAL CHARACTERISTICS (T_A= 25 °C unless otherwise noted)

PARAMETER

Typical thermal resistance, junction to ambient ⁽¹⁾

SYMBOL

VALUE

100

UNIT

R_JA

°C/ W

Typical thermal resistance, junction to lead

R_JL

Note

(1)

Mounted on minimum recommended pad layout

ORDERING INFORMATION (Example)

PREFERRED P/N

SMBG5.0A-E3/52

SMBG5.0A-E3/5B

SMBG5.0AHE3/52 ⁽¹⁾

SMBG5.0AHE3/5B ⁽¹⁾

UNIT WEIGHT (g) PREFERRED PACKAGE CODE

BASE QUANTITY

DELIVERY MODE

0.096

750

3200

750

7" diameter plastic tape and reel

13" diameter plastic tape and reel

7" diameter plastic tape and reel

13" diameter plastic tape and reel

3200

Note

(1)

AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES (T_A= 25 °C unless otherwise noted)

100

150

T_J= 25 °C

Pulse Width (t_d)

is defined as the Point

where the Peak Current

decays to 50 % of I_PPM

t_r= 10 µs

Peak Value

I_PPM

100

Half Value - I_PP

I_PPM

10/1000 µs Waveform

as defined by R.E.A.

0.2 x 0.2" (5.0 x 5.0 mm)

Copper Pad Areas

t_d

0.1

0.1 µs

1.0 µs

10 µs

100 µs

1.0 ms

10 ms

1.0

3.0

4.0

2.0

t_d- Pulse Width (s)

t - Time (ms)

Fig. 1 - Peak Pulse Power Rating Curve

Fig. 3 - Pulse Waveform

100

6000

1000

Measured at

Zero Bias

V_R, Measured at

Stand-Off

Voltage V_WM

100

T_J= 25 °C

Uni-Directional

Bi-Directional

f = 1.0 MHz

V_sig= 50 mVp-p

100

200

100 125

150 175

200

T_J- Initial Temperature (°C)

V_WM- Reverse Stand-Off Voltage (V)

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

Fig. 4 - Typical Junction Capacitance

Revision: 12-Nov-12

Document Number: 88456

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMBG5.0A thru SMBG188CA

www.vishay.com

Vishay General Semiconductor

100

200

8.3 ms Single Half Sine-Wave

Uni-Directional Only

100

1.0

0.1

0.001

0.01

0.1

100

1000

100

t_p- Pulse Duration (s)

Number of Cycles at 60 Hz

Fig. 5 - Typical Transient Thermal Impedance

Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-215AA (SMBG)

Cathode Band

Mounting Pad Layout

0.165 (4.19)

0.155 (3.94)

0.130 (3.30)

0.083 (2.10)

0.077 (1.96)

0.085 (2.16)

0.060 (1.27)

0.180 (4.57)

0.160 (4.06)

0.095 (2.41)

0.008 (0.20)

0.002 (0.05)

0.016 (0.41)

0.006 (0.15)

0.075 (1.90)

0.058 (1.47)

0.038 (0.97)

0.030 (0.76)

0.015 (0.38)

0.020

(0.51) MAX.

Seating Plane

0.255 (6.48)

0.235 (5.97)

Revision: 12-Nov-12

Document Number: 88456

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

SMBG51AHE3 [VISHAY]

相关型号：

SMBG51AHE3/52

SMBG51AHE3/5B

SMBG51AP

SMBG51ATR

SMBG51ATRE3

SMBG51C

SMBG51C-51

SMBG51C-5B-E3

SMBG51C-E3

SMBG51C-HE3/52

SMBG51C/51

SMBG51C/51-E3