SMBJ16-HE3/5B [VISHAY]

Trans Voltage Suppressor Diode, 600W, 16V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN;


型号：	SMBJ16-HE3/5B
厂家：	VISHAY
描述：	Trans Voltage Suppressor Diode, 600W, 16V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN
文件：	总6页 (文件大小：105K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMBJ5.0 thru SMBJ188CA

Vishay General Semiconductor

Surface Mount TRANSZORB^®Transient Voltage Suppressors

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available inuni-directional and bi-directional

• 600 W peak pulse power capability with a

10/1000 µs waveform, repetitive rate (duty

cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

DO-214AA (SMB J-Bend)

• Meets MSL level 1, per J-STD-020, LF maximum

peak of 260 °C

• Solder dip 260 °C, 40 s

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

PRIMARY CHARACTERISTICS

TYPICAL APPLICATIONS

V_WM

P_PPM

5.0 V to 188 V

600 W

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and

lighting on ICs, MOSFET, signal lines of sensor units

for consumer, computer, industrial, automotive and

telecommunication.

I_FSM(uni-directional only)

T_Jmax.

100 A

150 °C

MECHANICAL DATA

Case: DO-214AA (SMBJ)

Molding compound meets UL 94 V-0 flammability

rating

Base P/N-E3 - RoHS compliant, commercial grade

Base P/NHE3 - RoHS compliant, high reliability/

automotive grade (AEC Q101 qualified)

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD22-B102

DEVICES FOR BI-DIRECTION APPLICATIONS

For bi-directional devices use C or CA suffix

(e.g. SMBJ10CA).

Electrical characteristics apply in both directions.

E3 suffix meets JESD 201 class 1A whisker test, HE3

suffix meets JESD 201 class 2 whisker test

Polarity: For uni-directional types the band denotes

cathode end, no marking on bi-directional types

MAXIMUM RATINGS (T = 25 °C unless otherwise noted)

PARAMETER

SYMBOL

P_PPM

VALUE

600

UNIT

Peak pulse power dissipation with a 10/1000 µs waveform ⁽¹⁾⁽²⁾(Fig. 1)

Peak pulse current with a 10/1000 µs waveform ⁽¹⁾

Peak forward surge current 8.3 ms single half sine-wave uni-directional only ⁽²⁾

Operating junction and storage temperature range

I_PPM

See next table

100

I_FSM

T_J, T_STG

- 55 to + 150

°C

Notes:

(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A= 25 °C per Fig. 2

(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal

Document Number: 88392

Revision: 04-Sep-07

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

SMBJ5.0 thru SMBJ188CA

Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)

BREAKDOWN

VOLTAGE

MAXIMUM

REVERSE

LEAKAGE

MAXIMUM

PEAK PULSE

SURGE

MAXIMUM

CLAMPING

VOLTAGE AT

TEST

CURRENT

STAND-OFF

VOLTAGE

DEVICE MARKING

CODE

DEVICE TYPE

MODIFIED

(1)

AT I

(V)

AT V

CURRENT

“J” BEND LEAD

PPM

(mA)

(V)

(2)

(3)

(V)

(A)

(µA)

PPM

UNI

MIN.

MAX.

⁽⁺⁾SMBJ5.0

⁽⁺⁾SMBJ5.0A ⁽⁵⁾

⁽⁺⁾SMBJ6.0

⁽⁺⁾SMBJ6.0A

⁽⁺⁾SMBJ6.5

⁽⁺⁾SMBJ6.5A

⁽⁺⁾SMBJ7.0

⁽⁺⁾SMBJ7.0A

⁽⁺⁾SMBJ7.5

⁽⁺⁾SMBJ7.5A

⁽⁺⁾SMBJ8.0

⁽⁺⁾SMBJ8.0A

⁽⁺⁾SMBJ8.5

⁽⁺⁾SMBJ8.5A

⁽⁺⁾SMBJ9.0

⁽⁺⁾SMBJ9.0A

⁽⁺⁾SMBJ10

⁽⁺⁾SMBJ10A

⁽⁺⁾SMBJ11

⁽⁺⁾SMBJ11A

⁽⁺⁾SMBJ12

⁽⁺⁾SMBJ12A

⁽⁺⁾SMBJ13

⁽⁺⁾SMBJ13A

⁽⁺⁾SMBJ14

⁽⁺⁾SMBJ14A

⁽⁺⁾SMBJ15

⁽⁺⁾SMBJ15A

⁽⁺⁾SMBJ16

⁽⁺⁾SMBJ16A

⁽⁺⁾SMBJ17

⁽⁺⁾SMBJ17A

⁽⁺⁾SMBJ18

⁽⁺⁾SMBJ18A

⁽⁺⁾SMBJ20

⁽⁺⁾SMBJ20A

⁽⁺⁾SMBJ22

⁽⁺⁾SMBJ22A

⁽⁺⁾SMBJ24

⁽⁺⁾SMBJ24A

⁽⁺⁾SMBJ26

⁽⁺⁾SMBJ26A

⁽⁺⁾SMBJ28

⁽⁺⁾SMBJ28A

⁽⁺⁾SMBJ30

⁽⁺⁾SMBJ30A

⁽⁺⁾SMBJ33

⁽⁺⁾SMBJ33A

⁽⁺⁾SMBJ36

⁽⁺⁾SMBJ36A

⁽⁺⁾SMBJ40

⁽⁺⁾SMBJ40A

6.40

6.67

7.22

7.78

8.33

8.89

9.44

10.0

11.1

12.2

13.3

14.4

15.6

16.7

17.8

18.9

20.0

22.2

24.4

26.7

28.9

31.1

33.3

36.7

40.0

44.4

7.82

7.07

8.15

7.37

8.82

7.98

9.51

8.60

10.2

9.21

10.9

9.83

11.5

10.4

12.2

11.1

13.6

12.3

14.9

13.5

16.3

14.7

17.6

15.9

19.1

17.2

20.4

18.5

21.8

19.7

23.1

20.9

24.4

22.1

27.1

24.5

29.8

26.9

32.6

29.5

35.3

31.9

38.0

34.4

40.7

36.8

44.9

40.6

48.9

44.2

54.3

49.1

5.0

6.0

6.5

7.0

7.5

8.0

8.5

9.0

800

500

200

100

62.5

65.2

52.6

58.3

48.8

53.6

45.1

50.0

42.0

46.5

40.0

44.1

37.7

41.7

35.5

39.0

31.9

35.3

29.9

33.0

27.3

30.2

25.2

27.9

23.3

25.9

22.3

24.6

20.8

23.1

19.7

21.7

18.6

20.5

16.8

18.5

15.2

16.9

14.0

15.4

12.9

14.3

12.0

13.2

11.2

12.4

10.2

11.3

9.3

9.6

9.2

11.4

10.3

12.3

11.2

13.3

12.0

14.3

12.9

15.0

13.6

15.9

14.4

16.9

15.4

18.8

17.0

20.1

18.2

22.0

19.9

23.8

21.5

25.8

23.2

26.9

24.4

28.8

26.0

30.5

27.6

32.2

29.2

35.8

32.4

39.4

35.5

43.0

38.9

46.6

42.1

50.0

45.4

53.5

48.4

59.0

53.3

64.3

58.1

71.4

64.5

1.0

5.0

1.0

10.3

8.4

9.3

www.vishay.com

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88392

Revision: 04-Sep-07

SMBJ5.0 thru SMBJ188CA

Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)

BREAKDOWN

VOLTAGE

MAXIMUM

REVERSE

LEAKAGE

MAXIMUM

PEAK PULSE

SURGE

MAXIMUM

CLAMPING

VOLTAGE AT

TEST

CURRENT

STAND-OFF

VOLTAGE

DEVICE MARKING

CODE

DEVICE TYPE

MODIFIED

(1)

AT I

(V)

AT V

CURRENT

“J” BEND LEAD

PPM

(mA)

(V)

(2)

(3)

(V)

(A)

(µA)

PPM

UNI

MIN.

MAX.

⁽⁺⁾SMBJ43

47.8

50.0

53.3

56.7

60.0

64.4

66.7

71.1

77.8

83.3

86.7

94.4

100

111

122

133

144

167

178

189

209

58.4

52.8

61.1

55.3

65.1

58.9

69.3

62.7

73.3

66.3

78.7

71.2

81.5

73.7

86.9

78.6

95.1

86.0

102

92.1

106

95.8

115

104

122

111

136

123

149

135

163

147

176

159

204

185

218

197

231

209

255

231

1.0

7.8

76.7

69.4

80.3

72.7

85.5

77.4

91.1

82.4

96.3

87.1

103

93.6

107

96.8

114

103

125

113

134

121

139

126

151

137

160

146

179

162

196

177

214

193

231

209

268

243

287

259

304

275

344

328

⁽⁺⁾SMBJ43A

⁽⁺⁾SMBJ45

8.6

7.5

8.3

7.0

7.8

6.6

7.3

6.2

6.9

5.8

6.4

5.6

6.2

5.3

5.8

4.8

5.3

4.5

5.0

4.3

4.8

4.0

4.4

3.8

4.1

3.4

3.7

3.1

3.4

2.8

3.1

2.6

2.9

2.2

2.5

2.1

2.3

2.0

2.2

1.7

2.0

⁽⁺⁾SMBJ45A

⁽⁺⁾SMBJ48

⁽⁺⁾SMBJ48A

⁽⁺⁾SMBJ51

⁽⁺⁾SMBJ51A

⁽⁺⁾SMBJ54

⁽⁺⁾SMBJ54A

⁽⁺⁾SMBJ58

⁽⁺⁾SMBJ58A

⁽⁺⁾SMBJ60

⁽⁺⁾SMBJ60A

⁽⁺⁾SMBJ64

⁽⁺⁾SMBJ64A

⁽⁺⁾SMBJ70

⁽⁺⁾SMBJ70A

⁽⁺⁾SMBJ75

⁽⁺⁾SMBJ75A

⁽⁺⁾SMBJ78

⁽⁺⁾SMBJ78A

⁽⁺⁾SMBJ85

⁽⁺⁾SMBJ85A

⁽⁺⁾SMBJ90

⁽⁺⁾SMBJ90A

⁽⁺⁾SMBJ100

⁽⁺⁾SMBJ100A

⁽⁺⁾SMBJ110

⁽⁺⁾SMBJ110A

⁽⁺⁾SMBJ120

⁽⁺⁾SMBJ120A

⁽⁺⁾SMBJ130

⁽⁺⁾SMBJ130A

⁽⁺⁾SMBJ150

⁽⁺⁾SMBJ150A

⁽⁺⁾SMBJ160

⁽⁺⁾SMBJ160A

⁽⁺⁾SMBJ170

⁽⁺⁾SMBJ170A

SMBJ188

100

110

120

130

150

160

170

188

SMBJ188A

Notes:

(1) Pulse test: tp ≤ 50 ms

(2) Surge current waveform per Fig. 3 and derate per Fig. 2

(3) For bi-directional types having V_WMof 10 V and less, the I_Dlimit is doubled

(4) All terms and symbols are consistent with ANSI/IEEE C62.35

(5) For the bi-directional SMBG/SMBJ5.0CA, the maximum V_BRis 7.25 V

(6) V_F= 3.5 V at I_F= 50 A (uni-directional only)

(+)

Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number

E136766 for both uni-directional and bi-directional devices

Document Number: 88392

Revision: 04-Sep-07

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

SMBJ5.0 thru SMBJ188CA

Vishay General Semiconductor

THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)

PARAMETER

Typical thermal resistance, junction to ambient ⁽¹⁾

SYMBOL

VALUE

100

UNIT

°C/W

R_θJA

Typical thermal resistance, junction to lead

R_θJL

Note:

(1) Mounted on minimum recommended pad layout

ORDERING INFORMATION (Example)

PREFERRED P/N

UNIT WEIGHT (g)

PREFERRED PACKAGE CODE

BASE QUANTITY

DELIVERY MODE

SMBJ5.0A-E3/52

0.096

750

3200

750

7" diameter plastic tape and reel

13" diameter plastic tape and reel

7" diameter plastic tape and reel

13" diameter plastic tape and reel

SMBJ5.0A-E3/5B

SMBJ5.0AHE3/52 ⁽¹⁾

SMBJ5.0AHE3/5B ⁽¹⁾

0.096

3200

Note:

(1) Automotive grade AEC Q101 qualified

RATINGS AND CHARACTERISTICS CURVES

(T = 25 °C unless otherwise noted)

100

150

T_J= 25 °C

Pulse Width (t_d)

t_r= 10 µs

is defined as the Point

where the Peak Current

decays to 50 % of I_PPM

Peak Value

I_PPM

100

Half Value - I_PP

I_PPM

10/1000 µs Waveform

as defined by R.E.A.

0.2 x 0.2" (5.0 x 5.0 mm)

Copper Pad Areas

t_d

0.1

0.1 µs

1.0 µs

10 µs

100 µs

1.0 ms

10 ms

1.0

3.0

4.0

2.0

t - Time (ms)

t_d- Pulse Width (s)

Figure 1. Peak Pulse Power Rating Curve

Figure 3. Pulse Waveform

100

6000

1000

Measured at

Zero Bias

V_R, Measured at Stand-Off

Voltage V_WM

100

T_J= 25 °C

Uni-Directional

Bi-Directional

f = 1.0 MHz

V_sig= 50 mVp-p

100

200

100 125

150 175

200

T_J- Initial Temperature (°C)

V_WM- Reverse Stand-Off Voltage (V)

Figure 2. Pulse Power or Current vs. Initial Junction Temperature

Figure 4. Typical Junction Capacitance

www.vishay.com

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88392

Revision: 04-Sep-07

SMBJ5.0 thru SMBJ188CA

Vishay General Semiconductor

100

200

100

8.3 ms Single Half Sine-Wave

Uni-Directional Only

1.0

0.1

0.001

0.01

0.1

1.0

100

1000

100

t_p- Pulse Duration (s)

Number of Cycles at 60 Hz

Figure 5. Typical Transient Thermal Impedance

Figure 6. Maximum Non-Repetitive Peak Forward Surge Current

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-214AA (SMB-J-Bend)

Mounting Pad Layout

Cathode Band

0.085 (2.159)

MAX.

0.086 (2.20)

0.155 (3.94)

0.130 (3.30)

0.077 (1.95)

0.086 (2.18)

MIN.

0.180 (4.57)

0.160 (4.06)

0.060 (1.52)

0.012 (0.305)

0.006 (0.152)

MIN.

0.220 REF.

0.096 (2.44)

0.084 (2.13)

0.060 (1.52)

0.030 (0.76)

0.008 (0.2)

0 (0)

0.220 (5.59)

0.205 (5.21)

Document Number: 88392

Revision: 04-Sep-07

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 11-Mar-11

www.vishay.com

SMBJ16-HE3/5B [VISHAY]

相关型号：

UL1042

ZXFV201

ZXFV201N14

ZXFV201N14TA

ZXFV201N14TC

ZXFV202E5

ZXFV202N8

ZXFV203N14

ZXFV301N16(1)

ZXFV302N16

ZXFV4089

ZXFV4089N8