SMCJ12A-M3/9AT [VISHAY]
TVS DIODE 12V 19.9V DO214AB;
| 型号： | SMCJ12A-M3/9AT |
| 厂家： | 
VISHAY |
| 描述： | TVS DIODE 12V 19.9V DO214AB 局域网 光电二极管 电视 |
| 文件： | 总6页 (文件大小：103K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB Transient Voltage Suppressors
FEATURES
Available
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional
• Excellent clamping capability
• Very fast response time
SMC (DO-214AB)
Available
• Low incremental surge resistance
Cathode
Anode
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
(unidirectional)
(bidirectional)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
LINKS TO ADDITIONAL RESOURCES
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3
D
3D Models
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
PRIMARY CHARACTERISTICS
VBR unidirectional
6.40 V to 231 V
V
BR bidirectional
6.40 V to 231 V
5.0 V to 188 V
1500 W
VWM
PPPM
PD
MECHANICAL DATA
Case: SMC (DO-214AB)
6.5 W
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
IFSM (unidirectional only)
200 A
TJ max.
150 °C
Polarity
Unidirectional, bidirectional
SMC (DO-214AB)
Package
DEVICES FOR BIDIRECTION APPLICATIONS
(“_X” denotes revision code e.g. A, B, ...)
For bidirectional devices use CA suffix (e.g. SMCJ188CA).
Electrical characteristics apply in both directions.
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
Polarity: for unidirectional types the band denotes cathode
end, no marking on bidirectional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
1500
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1)(2)
Peak pulse current with a 10/1000 μs waveform (1)
Power dissipation on infinite heatsink, TA = 50 °C
Peak forward surge current 8.3 ms single half sine-wave unidirectional only
Operating junction and storage temperature range
IPPM
See next table
6.5
A
PD
W
(2)
IFSM
200
A
TJ, TSTG
-55 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal
(2)
Revision: 30-Jun-2021
Document Number: 88394
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
DEVICE
MARKING
CODE
DEVICE TYPE
MODIFIED
“J” BEND
LEAD
TEST
STAND-OFF
VOLTAGE
REVERSE PEAK PULSE CLAMPING TEMPERATURE
CURRENT VOLTAGE
(1)
V
BR AT IT
LEAKAGE
AT VWM
SURGE
VOLTAGE
AT IPPM
VC (V)
COEFFICIENT
OF VBR
IT
(mA)
VWM
(V)
(V)
CURRENT
ID (μA) (3)
I
PPM (A) (2)
(%/°C)
UNI
BI
MIN.
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
MAX.
7.07
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
104
(+)SMCJ5.0A (5) GDE GDE
10
10
10
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
1000
1000
500
200
100
50
163.0
145.6
133.9
125.0
116.3
110.3
104.2
97.4
88.2
82.4
75.4
69.8
64.7
61.5
57.7
54.3
51.4
46.3
42.3
38.6
35.6
33.0
31.0
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.9
10.9
10.3
9.3
9.2
0.057
0.059
0.061
0.065
0.067
0.069
0.073
0.074
0.078
0.080
0.083
0.084
0.087
0.088
0.089
0.090
0.092
0.094
0.096
0.096
0.097
0.098
0.099
0.100
0.100
0.101
0.102
0.102
0.103
0.104
0.104
0.104
0.105
0.105
0.105
0.106
0.106
0.106
0.106
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.108
(+)SMCJ6.0A
(+)SMCJ6.5A
(+)SMCJ7.0A
(+)SMCJ7.5A
(+)SMCJ8.0A
(+)SMCJ8.5A
(+)SMCJ9.0A
(+)SMCJ10A
(+)SMCJ11A
(+)SMCJ12A
(+)SMCJ13A
(+)SMCJ14A
(+)SMCJ15A
(+)SMCJ16A
(+)SMCJ17A
(+)SMCJ18A
(+)SMCJ20A
(+)SMCJ22A
(+)SMCJ24A
(+)SMCJ26A
(+)SMCJ28A
(+)SMCJ30A
(+)SMCJ33A
(+)SMCJ36A
(+)SMCJ40A
(+)SMCJ43A
(+)SMCJ45A
(+)SMCJ48A
(+)SMCJ51A
(+)SMCJ54A
(+)SMCJ58A
(+)SMCJ60A
(+)SMCJ64A
(+)SMCJ70A
(+)SMCJ75A
(+)SMCJ78A
(+)SMCJ85A
(+)SMCJ90A
(+)SMCJ100A
(+)SMCJ110A
(+)SMCJ120A
(+)SMCJ130A
(+)SMCJ150A
(+)SMCJ160A
(+)SMCJ170A
SMCJ188A
GDG GDG
GDK BDK
GDM GDM
GDP BDP
GDR BDR
GDT BDT
GDV BDV
GDX BDX
GDZ GDZ
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
20
10
5.0
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
GEE
BEE
GEG GEG
GEK BEK
GEM BEM
GEP GEP
GER GER
GET
GEV
GEX
GEZ
GFE
BET
BEV
BEX
BEZ
BFE
GFG BFG
GFK BFK
GFM BFM
GFP
GFR
GFT
GFV
GFX
GFZ
BFP
BFR
BFT
GFV
GFX
GFZ
GGE GGE
GGG GGG
GGK GGK
GGM GGM
GGP GGP
GGR GGR
GGT GGT
GGV GGV
GGX GGX
GGZ GGZ
GHE GHE
GHG GHG
GHK GHK
GHM GHM
GHP GHP
GHR GHR
GHS GHS
113
121
126
137
146
162
177
193
209
243
259
275
85
90
111
111
123
100
110
120
130
150
160
170
188
122
135
8.5
7.8
7.2
6.2
5.8
5.5
4.6
133
147
144
159
167
185
178
197
189
209
209
231
328
Notes
(1)
(2)
(3)
(4)
(5)
(6)
(+)
Pulse test: tp ≤ 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
For bidirectional types having VWM of 10 V and less, the ID limit is doubled
All terms and symbols are consistent with ANSI/IEEE C62.35
For the bidirectional SMCJ5.0CA, the maximum VBR is 7.25 V
VF = 3.5 V at IF = 100 A (unidirectional only)
Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number
E136766 for both uni-directional and bi-directional devices
Revision: 30-Jun-2021
Document Number: 88394
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance, junction to ambient air (1)
SYMBOL
VALUE
75
UNIT
RθJA
°C/ W
Typical thermal resistance, junction to lead
RθJL
15
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SMCJ5.0A-E3/57T
SMCJ5.0A-M3/57T
SMCJ5.0A-E3/9AT
SMCJ5.0A-M3/9AT
SMCJ5.0AHE3_A/H (1)
SMCJ5.0AHM3_A/H (1)
SMCJ5.0AHE3_A/I (1)
SMCJ5.0AHM3_A/I (1)
0.211
0.211
0.211
0.211
57T
9AT
H
850
3500
850
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
I
3500
Note
(1)
AEC-Q101 qualified
Revision: 30-Jun-2021
Document Number: 88394
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
10
1
20 000
10 000
Measured at
zero bias
1000
100
10
VR, measured at
Stand-off voltage VWM
Uni-directional
Bi-directional
TJ = 25 °C
f = 1.0 MHz
0.31 x 0.31" (8.0 x 8.0 mm)
Copper pad areas
V
sig = 50 mVp-p
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1
10
100
400
td - Pulse Width (s)
VWM - Reverse Stand-Off Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance Unidirectional
100
100
75
10
1.0
0.1
50
25
0
0.001
0.01
0.1
1
10
100
1000
0
25
50
75
100 125
150 175
200
tp - Pulse Duration (s)
TJ - Initial Temperature (°C)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 5 - Typical Transient Thermal Impedance
150
200
100
TJ = 25 °C
Pulse width (td)
is defined as the point
where the peak current
decays to 50 % of IPPM
tr = 10 µs
Peak value
IPPM
100
50
0
Half value -
IPPM
IPP
2
10/1000 µs waveform
as defined by R.E.A.
TJ = TJ max.
8.3 ms single half sine-wave
td
10
1.0
3.0
4.0
1
100
0
2.0
10
t - Time (ms)
Number of Cycles at 60 Hz
Fig. 3 - Pulse Waveform
Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current
Unidirectional Use On
Revision: 30-Jun-2021
Document Number: 88394
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMC (DO-214AB)
Mounting Pad Layout
Cathode Band
0.185 (4.69)
MAX.
0.126 (3.20)
0.114 (2.90)
0.246 (6.22)
0.220 (5.59)
0.126 (3.20)
MIN.
0.280 (7.11)
0.260 (6.60)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.320 REF.
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.320 (8.13)
0.305 (7.75)
Revision: 30-Jun-2021
Document Number: 88394
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
SMCJ12A-TP
Trans Voltage Suppressor Diode, 1500W, 12V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN
MCC
SMCJ12A-TP-HF
Trans Voltage Suppressor Diode, 1500W, 12V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMC, 2 PIN
MCC
SMCJ12A.TF
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB,
SEMTECH
SMCJ12A/51T
Trans Voltage Suppressor Diode, 1500W, 12V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
SMCJ12A/9
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
SMCJ12AE3
Trans Voltage Suppressor Diode, 1500W, 12V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC PACKAGE-2
MICROSEMI
SMCJ12AE3/TR
Trans Voltage Suppressor Diode, 1500W, 12V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMCJ, 2 PIN
MICROSEMI
SMCJ12AE3/TR13
Trans Voltage Suppressor Diode, 1500W, 12V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN
MICROSEMI
SMCJ12AE3TR
1500W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMCJ, 2 PIN
MICROSEMI
©2020 ICPDF网 联系我们和版权申明