SMP11-M3/84A [VISHAY]
TVS DIODE 11V 20.1V DO220AA;
| 型号： | SMP11-M3/84A |
| 厂家： | 
VISHAY |
| 描述： | TVS DIODE 11V 20.1V DO220AA 电视 |
| 文件： | 总5页 (文件大小：98K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMP3V3 thru SMP36A
Vishay General Semiconductor
www.vishay.com
®
Surface Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
eSMP® Series
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Available in uni-directional
• 400 W peak pulse power capability with a
10/1000 μs waveform
• Excellent clamping capability
• Very fast response time
SMP (DO-220AA)
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
Anode
Cathode
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
click logo to get started
DESIGN SUPPORT TOOLS
TYPICAL APPLICATIONS
Models
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
Available
PRIMARY CHARACTERISTICS
VBR uni-directional
4.10 V to 44.2 V
MECHANICAL DATA
VWM
3.3 V to 36 V
400 W
Case: SMP (DO-220AA)
Molding compound meets UL 94 V-0 flammability rating
PPPM
Base P/N-M3
industrial grade
- halogen-free, RoHS-compliant, and
IFSM
40 A
TJ max.
Polarity
Package
150 °C
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test
Uni-directional
SMP (DO-220AA)
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) (1)(2)
Peak pulse current with a 10/1000 μs waveform (1)
Peak forward surge current 10 ms single half sine-wave (2)
Maximum instantaneous forward voltage at 25 A (3)
Operating junction and storage temperature range
400
See table next page
A
IFSM
40
2.5
A
VF
V
TJ, TSTG
-55 to +150
°C
Notes
(1)
(2)
(3)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
Pulse test: 300 μs pulse width, 1 % duty cycle
Revision: 10-Aug-2018
Document Number: 88481
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMP3V3 thru SMP36A
Vishay General Semiconductor
www.vishay.com
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
REVERSE
LEAKAGE
AT VWM
MAXIMUM
PEAK PULSE
SURGE
MAXIMUM
CLAMPING
VOLTAGE AT
IPPM
TEST
CURRENT
IT
VOLTAGE
DEVICE
MARKING
CODE
STAND-OFF
VOLTAGE VWM
(V)
(1)
V
BR AT IT
(V)
DEVICE TYPE
CURRENT
(mA)
ID (μA) (3)
I
PPM (A) (2)
VC (V)
MIN.
4.10
6.40
6.67
7.22
7.78
8.33
8.89
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
MAX.
5.10
7.07
7.37
7.98
8.60
9.21
9.83
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
SMP3V3
SMP5.0A
SMP6.0A
SMP6.5A
SMP7.0A
SMP7.5A
SMP8.0A
SMP11A
SMP12A
SMP13A
SMP14A
SMP15A
SMP16A
SMP17A
SMP18A
SMP20A
SMP22A
SMP24A
SMP26A
SMP28A
SMP30A
SMP33A
SMP36A
AC
AE
AG
AK
AM
AN
AR
AZ
BE
BG
BK
BM
BP
BR
BT
BV
BX
BZ
CE
CG
CK
CM
CP
1.0
10
3.3
5.0
6.0
6.5
7.0
7.5
8.0
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
200
150
600
100
50
54.8
43.5
38.8
35.7
33.3
31.0
29.4
22.0
20.1
18.6
17.2
16.4
15.4
14.5
13.7
12.3
11.3
10.3
9.5
7.3
9.2
10
10.3
11.2
12.0
12.9
13.6
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
10
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
50
20
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
8.8
8.3
7.5
6.9
Notes
(1)
(2)
(3)
VBR measured after IT applied for 300 μs, IT = square wave pulse or equivalent
Surge current waveform per fig. 3 and derate per fig. 2
All terms and symbols are consistent with ANSI/IEEE C62.35
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
50
UNIT
°C/W
°C/W
Typical thermal resistance, junction to lead (1)
Typical thermal resistance, junction to ambient (2)
RJL
RJA
250
Notes
(1)
Mounted on PCB with 5.0 mm x 5.0 mm copper pad areas attached to each terminal
Mounted on minimum recommended pad layout
(2)
ORDERING INFORMATION (Example)
PREFERRED P/N
SMP3V3-M3/84A
SMP3V3-M3/85A
SMP11A-M3/84A
SMP11A-M3/85A
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
3000
DELIVERY MODE
0.024
84A
85A
84A
85A
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
0.024
10 000
0.024
3000
0.024
10 000
Revision: 10-Aug-2018
Document Number: 88481
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMP3V3 thru SMP36A
Vishay General Semiconductor
www.vishay.com
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
10
10 000
1000
100
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
Measured at
Zero Bias
Measured at
Stand-Off
Voltage, VWM
1
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.2" x 0.2" (5.0 mm x 5.0 mm)
Copper Pad Areas
0.1
0.1
10
1
10
100
1000
10 000
1
10
100
td - Pulse Width (µs)
VWM - Reverse Stand-Off Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance
1000
100
10
100
75
50
25
0
1
0.1
0.001
0.01
0.1
1
10
100
1000
0
25
50
75 100 125 150 175 200
t - Pulse Duration (s)
TJ - Initial Temperature (°C)
Fig. 2 - Pulse Derating Curve
Fig. 5 - Typical Transient Thermal Impedance
150
100
50
TJ = 25 °C
Pulse Width (td)
tr = 10 µs
is defined as the Point
Peak Value
where the Peak Current
IPPM
decays to 50 % of IPPM
IPP
2
Half Value -
IPPM
10/1000 µs Waveform
as defined by R.E.A.
td
0
0
1.0
2.0
3.0
4.0
t - Time (ms)
Fig. 3 - Pulse Waveform
Revision: 10-Aug-2018
Document Number: 88481
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMP3V3 thru SMP36A
Vishay General Semiconductor
www.vishay.com
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMP (DO-220AA)
0.012 (0.30) REF.
Cathode Band
0.036 (0.91)
0.024 (0.61)
0.053 (1.35)
0.041 (1.05)
0.086 (2.18)
0.074 (1.88)
0.032 (0.80)
0.016 (0.40)
0.103 (2.60)
0.087 (2.20)
0.142 (3.61)
0.126 (3.19)
0.158 (4.00)
0.146 (3.70)
0.030
(0.762)
0.105
(2.67)
0.025
(0.635)
0.013 (0.35)
0.004 (0.10)
0.045 (1.15)
0.033 (0.85)
0.050
(1.27)
0.100
(2.54)
0.012 (0.30)
0.000 (0.00)
0.018 (0.45)
0.006 (0.15)
Revision: 10-Aug-2018
Document Number: 88481
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明