SMPC10A-M3/86A [VISHAY]
TVS DIODE 10V 17V TO277A;
| 型号： | SMPC10A-M3/86A |
| 厂家： | 
VISHAY |
| 描述： | TVS DIODE 10V 17V TO277A 电视 |
| 文件： | 总6页 (文件大小：110K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
eSMP® Series
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
• Uni-direction
+
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
1
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
2
SMPC (TO-277A)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHM3
Cathode 1
Cathode 2
A
SMPCxxA
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Anode
Anode 1
Anode 2
K
SMPCxxAN
Cathode
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial and telecommunication. Sensitive
equipment against transient overvoltages.
DESIGN SUPPORT TOOLS AVAILABLE
3
D
3D Models
PRIMARY CHARACTERISTICS
MECHANICAL DATA
VBR uni-directional
6.40 V to 104 V
Case: SMPC (TO-277A)
Molding compound meets UL 94 V-0 flammability rating
VWM
5.0 V to 85 V
1500 W
Base P/N-M3
industrial grade
Base P/NHM3
-
halogen-free, RoHS-compliant, and
PPPM
P
D at TA = 25 °C
1.25 W
-
halogen-free, RoHS-compliant, and
AEC-Q101 qualified
TJ max.
150 °C
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 and HM3 suffix meet JESD 201 class 2 whisker test
Polarity
Uni-directional
SMPC (TO-277A)
Package
Note
Polarity: the band denotes cathode end
•
All electrical characteristics are only applicable when two
identical polarity terminals are connected
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
1500
UNIT
W
(1)
Peak power dissipation with a 10/1000 μs waveform (fig. 3)
PPPM
(1)
Peak pulse current with a 10/1000 μs waveform (fig. 1)
Power dissipation, TA = 25 °C
IPPM
See next table
1.25
A
(2)
PD
W
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
°C
Note
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Power dissipation mounted on FR4 PCB, 2 oz. standard footprint
(2)
Revision: 24-Jun-2019
Document Number: 89116
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
PEAK
DEVICE
MARKING
CODE
MAXIMUM
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
AT IPPM
DEVICE TYPE
TEST
STAND-OFF REVERSE
(1)
V
BR AT IT
(V)
PULSE
CURRENT VOLTAGE
LEAKAGE
CURRENT
SURGE
IT
(mA)
VWM
(V)
CURRENT
I
R AT VWM
ANODE ON
HEATSINK
CATHODEON SUFFIX SUFFIX
(2)
IPPM
VC (V)
MIN. MAX.
(μA)
HEATSINK
A
AN
(A)
150.0
145.6
133.9
125.0
116.3
110.3
104.2
97.4
88.2
82.4
75.4
69.8
64.7
61.5
57.7
54.3
51.4
46.3
42.3
38.6
35.6
33.0
31.0
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.9
10.9
SMPC5.0A
SMPC6.0A
SMPC6.5A
SMPC7.0A
SMPC7.5A
SMPC8.0A
SMPC8.5A
SMPC9.0A
SMPC10A
SMPC11A
SMPC12A
SMPC13A
SMPC14A
SMPC15A
SMPC16A
SMPC17A
SMPC18A
SMPC20A
SMPC22A
SMPC24A
SMPC26A
SMPC28A
SMPC30A
SMPC33A
SMPC36A
-
-
GDE
GDG
GDK
GDM
GDP
GDR
GDT
GDV
GDX
GDZ
GEE
GEG
GEK
GEM
GEP
GER
GET
GEV
GEX
GEZ
GFE
GFG
GFK
GFM
GFP
-
-
-
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
7.07
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
104
10
10
5.0
1500
1000
500
200
100
50
10.0
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
-
6.0
-
-
10
6.5
-
-
10
7.0
-
-
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
7.5
-
-
8.0
-
-
8.5
20
-
-
9.0
5.0
2.0
2.0
2.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
-
-
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SMPC22AN
SMPC24AN
SMPC26AN
SMPC28AN
SMPC30AN
SMPC33AN
SMPC36AN
SMPC40AN
SMPC43AN
SMPC45AN
SMPC48AN
SMPC51AN
SMPC54AN
SMPC58AN
SMPC60AN
SMPC64AN
SMPC70AN
SMPC75AN
SMPC78AN
SMPC85AN
PAV
PAW
PAX
PAY
PAZ
PBA
PBB
PBC
PBD
PBE
PBF
PBG
PBH
PBK
PBL
PBM
PBN
PBP
PBQ
PBR
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
113
-
-
121
-
-
126
-
-
137
Notes
(1)
(2)
(3)
Pulse test: t 50 ms
Surge current waveform per fig. 3 and derated per fig. 2
All terms and symbols are consistent with ANSI/IEEE C62.35
Revision: 24-Jun-2019
Document Number: 89116
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
TYP.
MAX.
100
3
UNIT
(1)
RJA
85
Typical thermal resistance
°C/W
(2)
RJM
2.5
Notes
(1)
Thermal resistance junction-to-ambient to follow JEDEC® 51-2A, device mounted on FR4 PCB, 2 oz. standard footprint
Thermal resistance junction-to-mount to follow JEDEC® 51-14 using Transient Dual Interface Test Method (TDIM)
(2)
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SMPC5.0A-M3/86A (1)
SMPC5.0A-M3/87A (1)
0.10
0.10
86A
87A
1500
6500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
SMPC22AN-M3/H
SMPC22AN-M3/I
0.10
0.10
0.10
0.10
H
I
1500
6500
1500
6500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
SMPC22ANHM3/H (2)
SMPC22ANHM3/I (2)
H
I
Notes
(1)
Package code /86A and /87A are available for SMPC5.0A-M3 to SMPC36A-M3
AEC-Q101 qualified, is available for SMPC22AN to SMPC85AN only
(2)
Revision: 24-Jun-2019
Document Number: 89116
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Axis Title
Axis Title
100
10
1
10000
1000
100
10000
1000
100
10 000
1000
100
VR Measured at Zero Bias
VR Measured at Stand-off
Voltage, VWM
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.1
10
10000
10
10
10
100
1000
1
10
100
td - Pulse Width s)
VWM - Reverse Stand-off Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 3 - Typical Junction Capacitance
Axis Title
Axis Title
100
10000
1000
100
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
10000
1000
100
Mounted on FR4 PCB, 2oz,
standard footprint
75
50
25
0
10
10
0
25
50
75
100
125
150
0
25
50
75
100
125
150
TJ - Initial Temperature (°C)
TA - Ambient Temperature (°C)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 4 - Steady State Power Dissipation
Axis Title
Junction to ambient
100
10000
10
1
1000
100
10
0.1
0.001 0.01
0.1
1
10
100 1000
t - Pulse Duration (s)
Fig. 5 - Typical Transient Thermal Impedance
Note
•
Fig. 1 - Power calculation is based on IPPM times defined maximum clamping voltage by pulse width
Fig. 1 - 10 000 μs PPPM is actual tested for VWM 60 V types, over 60 V types 10 000 μs PPPM is curve extensional value
Revision: 24-Jun-2019
Document Number: 89116
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMPC (TO-277A)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
Cathode band line (1)
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC® TO-277A
Note
(1)
Cathode band orientation depends on device actual polarity direction
Revision: 24-Jun-2019
Document Number: 89116
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
SMPC11A-M3/86A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC11A-M3/87A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC12A-M3/86A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC12A-M3/87A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC13A-M3/86A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC14A-M3/86A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明