SMPC33ANHM3/H [VISHAY]
Trans Voltage Suppressor Diode,;型号: | SMPC33ANHM3/H |
厂家: | VISHAY |
描述: | Trans Voltage Suppressor Diode, 二极管 |
文件: | 总6页 (文件大小:114K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
eSMP® Series
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
• Uni-direction only
+
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
1
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
2
SMPC (TO-277A)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHM3
Cathode 1
Cathode 2
A
SMPCxxA
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Anode
Anode 1
Anode 2
K
SMPCxxAN
Cathode
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial and telecommunication. Sensitive
equipment against transient overvoltages.
click logo to get started
DESIGN SUPPORT TOOLS
Models
Available
MECHANICAL DATA
PRIMARY CHARACTERISTICS
Case: SMPC (TO-277A)
VBR uni-directional
6.40 V to 104 V
Molding compound meets UL 94 V-0 flammability rating
VWM
5.0 V to 85 V
1500 W
Base P/N-M3
industrial grade
Base P/NHM3
-
halogen-free, RoHS-compliant, and
PPPM
-
halogen-free, RoHS-compliant, and
PD
6.5 W
AEC-Q101 qualified
TJ max.
Polarity
Package
150 °C
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 and HM3 suffix meet JESD 201 class 2 whisker test
Uni-directional
SMPC (TO-277A)
Note
Polarity: the band denotes cathode end
•
All electrical characteristics are only applicable when two
identical polarity terminals are connected
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
1500
UNIT
W
(1)
Peak power dissipation with a 10/1000 μs waveform (fig. 3)
Peak pulse current with a 10/1000 μs waveform (fig. 1)
Power dissipation on infinite heatsink, TM = 50 °C
Operating junction and storage temperature range
PPPM
(1)
IPPM
See next table
6.5
A
PD
W
TJ, TSTG
-55 to +150
°C
Note
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Revision: 09-Nov-2018
Document Number: 89116
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
PEAK
DEVICE
MARKING
CODE
MAXIMUM
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
AT IPPM
DEVICE TYPE
TEST
STAND-OFF REVERSE
(1)
V
BR AT IT
(V)
PULSE
CURRENT VOLTAGE
LEAKAGE
CURRENT
SURGE
IT
(mA)
VWM
(V)
CURRENT
I
R AT VWM
ANODE ON
HEATSINK
CATHODEON SUFFIX SUFFIX
(2)
IPPM
VC (V)
MIN. MAX.
(μA)
HEATSINK
A
AN
(A)
150.0
145.6
133.9
125.0
116.3
110.3
104.2
97.4
88.2
82.4
75.4
69.8
64.7
61.5
57.7
54.3
51.4
46.3
42.3
38.6
35.6
33.0
31.0
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.9
10.9
SMPC5.0A
SMPC6.0A
SMPC6.5A
SMPC7.0A
SMPC7.5A
SMPC8.0A
SMPC8.5A
SMPC9.0A
SMPC10A
SMPC11A
SMPC12A
SMPC13A
SMPC14A
SMPC15A
SMPC16A
SMPC17A
SMPC18A
SMPC20A
SMPC22A
SMPC24A
SMPC26A
SMPC28A
SMPC30A
SMPC33A
SMPC36A
-
-
GDE
GDG
GDK
GDM
GDP
GDR
GDT
GDV
GDX
GDZ
GEE
GEG
GEK
GEM
GEP
GER
GET
GEV
GEX
GEZ
GFE
GFG
GFK
GFM
GFP
-
-
-
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
7.07
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
104
10
10
5.0
1500
1000
500
200
100
50
10.0
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
-
6.0
-
-
10
6.5
-
-
10
7.0
-
-
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
7.5
-
-
8.0
-
-
8.5
20
-
-
9.0
5.0
2.0
2.0
2.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
-
-
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SMPC22AN
SMPC24AN
SMPC26AN
SMPC28AN
SMPC30AN
SMPC33AN
SMPC36AN
SMPC40AN
SMPC43AN
SMPC45AN
SMPC48AN
SMPC51AN
SMPC54AN
SMPC58AN
SMPC60AN
SMPC64AN
SMPC70AN
SMPC75AN
SMPC78AN
SMPC85AN
PAV
PAW
PAX
PAY
PAZ
PBA
PBB
PBC
PBD
PBE
PBF
PBG
PBH
PBK
PBL
PBM
PBN
PBP
PBQ
PBR
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
113
-
-
121
-
-
126
-
-
137
Notes
(1) Pulse test: t 50 ms
(2) Surge current waveform per fig. 3 and derated per fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
Revision: 09-Nov-2018
Document Number: 89116
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
100
UNIT
(1)
Typical thermal resistance, junction to ambient air
Typical thermal resistance, junction to mount
RJA
°C/W
RJM
15
Note
(1) Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SMPC5.0A-M3/86A (1)
SMPC5.0A-M3/87A (1)
SMPC22AN-M3/H
0.10
0.10
0.10
86A
87A
H
1500
6500
1500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
SMPC22AN-M3/I
0.10
0.10
0.10
I
H
I
6500
1500
6500
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
SMPC22ANHM3/H (2)
SMPC22ANHM3/I (2)
Notes
(1)
Package code /86A and /87A are available for SMPC5.0A-M3 to SMPC36A-M3
AEC-Q101 qualified available for SMPC22AN to SMPC85AN only.
(2)
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
10
1
100
75
50
25
0
0.1
10
100
1000
10 000
0
25
50
75
100
125
150
td - Pulse Width (μs)
TJ - Initial Temperature (°C)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 1 - Peak Pulse Power Rating Curve
Revision: 09-Nov-2018
Document Number: 89116
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
7
150
100
50
TA = TM mounted on
infinite heatsink
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
tr = 10 µs
6
5
4
3
2
1
0
Peak Value
IPPM
Half Value - IPP
IPPM
2
Mounted on minimum
recommended pad layout
10/1000 µs Waveform
as defined by R.E.A.
td
0
0
25
50
75
100
125
150
0
1.0
2.0
3.0
4.0
t - Time (ms)
TA - Ambient Temperature (°C)
Fig. 3 - Pulse Waveform
Fig. 5 - Steady State Power Dissipation
10000
1000
100
V
R
Measured at zero bias
VR
Measured at stand-off
voltage, VWM
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
10
100
VWM - Reverse Stand-Off Voltage (V)
Fig. 4 - Typical Junction Capacitance
Note
•
Fig. 1 - Power calculation is based on IPPM times defined maximum clamping voltage by pulse width;
Fig. 1 - 10 000 μs PPPM is actual test for VWM 60 V types, over 60 V types 10 000 μs PPPM is curve extensional value
Revision: 09-Nov-2018
Document Number: 89116
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMPC (TO-277A)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
Cathode band line (1)
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC® TO-277A
Note
(1) Cathode band orientation depends on device actual polarity direction
Revision: 09-Nov-2018
Document Number: 89116
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
SMPC36A-M3/86A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC36A-M3/87A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明