ST-5ETP10100 [VISHAY]
Trimmer, Cermet, 0.25W, 10ohm, 10% +/-Tol, 14 Turn(s), ROHS COMPLIANT;型号: | ST-5ETP10100 |
厂家: | VISHAY |
描述: | Trimmer, Cermet, 0.25W, 10ohm, 10% +/-Tol, 14 Turn(s), ROHS COMPLIANT 电阻器 |
文件: | 总7页 (文件大小:367K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ST-5
Vishay
Surface Mount Cermet Trimmers (14 turns)
FEATURES
• Lead (Pb)-free soldering, Cadmium-free
• Precise adjustment is possible
• Automatic mounting is possible (Taping)
• Flow/reflow soldering is possible
• Sealed construction (Washable)
• RoHS compliant
DIMENSIONS in millimeters
RECOMMENDED P.C.B. PAD OUTLINE DIMENSIONS
(Unit: mm)
1.4
1.4
ST-5W, EW
ST-5X, EX
0
0
1.4
1.4
1.4
1.4
5
5
ST-5P, EP
ST-5R, ER
1.4
1.4
0
0
1.4
1.4
1.4
1.4
5
5
Note) The zero point is the center of mounting.
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
www.vishay.com
1
For technical questions contact: copalsupport@vishay.com
Document Number: 58011
Revision: 10-Oct-05
ST-5
Surface Mount Cermet Trimmers (14 turns)
Vishay
DIMENSIONS in millimeters
OUTLINE DIMENSIONS
Unless otherwise specified, tolerance : 0.3 (Unit: mm)
ST-5W, ST-5EW
Top adjustment
1
3
CW rotation
Resistance code & Production date code
2
φ
1.6, Slot 0.6 W× 0.8 D
2
3
: Note the terminal position.
Lead free Identification mark
1
1
1
1
6.75
6.3
1
4.3
ST-5X, ST-5EX
Side adjustment
Resistance code, Production date code
& Lead free Identification mark
φ
1.6, Slot 0.6 W× 0.8 D
1
0.9
2
3
1
1
1
6.75
6.3
4.3
ST-5P, ST-5EP
Side adjustment
8.75
Resistance code & Production date code
3
1
1
φ
1.6, Slot 0.6 W× 0.8 D
2
Lead free Identification mark
1
1
6.75
1
4.3
ST-5R, ST-5ER
Side adjustment
Resistance code, Production date code
φ
8.75
0.9
1.6, Slot 0.6 W× 0.8 D
& Lead free Identification mark
3
1
1
1
2
1
6.75
4.3
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
Document Number: 58011
Revision: 10-Oct-05
For technical questions contact: copalsupport@vishay.com
www.vishay.com
2
ST-5
Surface Mount Cermet Trimmers (14 turns)
Vishay
DIMENSIONS in millimeters
PACKAGING SPECIFICATIONS
Taping packaging specifications
Taping version is packaged in 500 pcs. per reel.
Orders will be accepted for units of 500 pcs., i.e., 500, 1000, 1500 pcs., etc.
Taping version is boxed with one reel (500 pcs.).
Maximum number of consecutive missing pieces = 2
Leader length and reel dimension are shown in the dia-grams below.
EMBOSSED TAPE DIMENSIONS
REEL DIMENSIONS
(Conforms to JIS C 0806-3)
(In accordance with EIAJ ET-7200A)
(Unit: mm)
17.4 1
Empty
Filled
Empty
21 0.8
End
Head
2 0.5
40 mm min.
20 pitches min.
Leader400 mm min.
Direction of feed
13 0.2
254 2 (ST-5TP/TR/ETP/ETR)
21.4 1
330 2 (ST-5TW/TX/ETW/ETX)
ST-5TP/TR/ETP/ETR
ST-5TW/TX/ETW/ETX
0.4 0.1
0.4 0.1
12 0.1
4 0.1
12 0.1
4 0.1 2 0.1
2 0.1
Installation example
(ST-5P/EP)
Installation example
(ST-5W/EW)
Direction of feed
5
Direction of feed
8.5
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
Magazine packaging specifications
Magazine is packed 50 pcs. per stick.
Orders will be accepted for units of 50 pcs., i.e., 50, 100, 150 pcs., etc.
Magazines are packed 2000 pcs. per box.
Magazine dimensions
(Unit: mm)
3 1
3 1
8.5
380 2
Installation example (ST-5W/EW)
Stopper
Vinyl bag packaging specifications
Unit of bulk in vinyl bag packaging is 50 pcs. per pack.
Boxing of bulk in vinyl bags is performed with 200 pcs. per box.
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
Document Number: 58011
Revision: 10-Oct-05
For technical questions contact: copalsupport@vishay.com
www.vishay.com
3
ST-5
Surface Mount Cermet Trimmers (14 turns)
Vishay
MECHANICAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Mechanical turn
Operating torque
Mechanical stop
Rotational life
14 turns
Test item
Test conditions
Specifications
20 mN m {204 gf cm} maximum
Clutch action
Thermal shock
- 65 ∼ 125 °C (0.5 h),
[∆R/R ≤ 2 %]
[S.S. ≤ 1 %]
5 cycles
Humidity
Shock
- 10 ∼ 65 °C (Relative
humidity 80 ∼ 98 %),
10 cycles, 240 h
981 m/s2, 6 ms
6 directions for 3 times
each
200 cycles
10 Ω ∼ 200 Ω [∆R/R ≤ ± (0.5 Ω + 3 %]
500 Ω ∼ 2 MΩ [∆R/R ≤ ± (0.5 Ω + 2 %]
[∆R/R ≤ 2 %]
Thrust to shaft
Solderability
5 N {0.51 kgf} minimum
Sn-Pb: 235 °C, 2 s
Sn (Lead-free): 245 ± 3 °C, 2 ∼ 3 s
[∆R/R ≤ 1%]
[S.S. ≤ 1 %]
Vibration
Amplitude 1.52 mm or
Acceleration 196 m/s2,
10 ∼ 2000 Hz,
Shear (Adhesion)
Substrate bending
Pull-off strength
5 N {0.51 kgf} 10 s
Width 90 mm, bend 3 mm, 5 s, 1 time
5 N {0.51 kgf} 10s
3 directions, 12 times
each
Load Life
85 °C, 0.25 W, 1000 h
- 55 °C, 2 h
[∆R/R ≤ 3 %]
[S.S. ≤ 1 %]
ELECTRICAL CHARACTERISTICS
Low temperature
operation
[∆R/R ≤ 2 %]
[S.S. ≤ 2 %]
Nominal resistance
range
10 Ω ∼ 2 MΩ
High temperature
exposure
120 °C, 250 h
85 °C, 60 s
[∆R/R ≤ 3 %]
[S.S. ≤ 2 %]
Resistance tolerance
Power ratings
± 10 %
0.25 W (85 °C) 0 W (120 °C)
Linear law (B)
Immersion seal
No leaks (No
continuous bubbles)
Resistance law
Maximum input voltage DC200 V or power rating, whichever is
smaller
Soldering heat
Sn-Pb
260 °C, 10 s or 215 °C,
35 s
Maximum wiper current
100 mA or power rating, whichever is
smaller
Sn
Flow: 260 °C ± 3 °C as
the temperature in a pot
of molten solder,
immersion from head of
terminal to backside of
board, 5 ∼ 6 s, two times
maximum
Effective electrical turn
End resistance
11 turns
1 % or 2 Ω, whichever is greater
1 % or 3 Ω, whichever is greater
- 55 ∼ 120°C
C.R.V.
[∆R/R ≤ 1 %]
Operating temp. range
Temp. coefficient
10 Ω ∼ 50 Ω: ± 250 10-6 /°C maximum
100 Ω ∼ 2MΩ: ± 100 10-6 /°C maximum
Reflow: Peak
Insulation resistance
Dielectric strength
Net weight
1000 MΩ minimum (DC500 V)
AC600 V, 60 s
temperature 255 °C
(Please refer to the
profile below.)
Approx. 0.35 g
Manual soldering:
350 ± 10 °C, 3 ∼ 4 s
Reflow profile for soldering heat evaluation
(°C)
250
Peak : 250
+5 °C
0
Over 230°C
200
150
Pre Heating Zone
180°C
150°C
90 30 s
30 10 s
100
50
Soldering Zone
Heating time
Reflow : two times maximum
Document Number: 58011
Revision: 10-Oct-05
For technical questions contact: copalsupport@vishay.com
www.vishay.com
4
ST-5
Surface Mount Cermet Trimmers (14 turns)
Vishay
MAXIMUM INPUT RATINGS
CONSTRUCTION
Nominal
resistance
values (Ω)
Resistance
code
Maximum
input voltage wiper current
Maximum
Part Name
Material
Flammability
UL-94V-O
-
1
Housing
Shaft
Polyphenylenesulphide
Brass, Nickel-plated
(V)
(mA)
100
2
3
10*
20*
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
1.00
2.00
3.53
5.00
7.07
11.2
15.8
22.4
35.4
50.0
70.7
112
Terminal pin
Sn-Pb
Sn
Copper,
Solder-plated
-
-
-
-
-
100
50
70.7
50.0
35.4
22.4
15.8
11.2
7.07
5.00
3.54
2.24
1.58
1.00
0.40
0.20
0.10
Copper, Tin-plated
Ceramic
100
200
500
1 k
4
5
6
7
8
9
Base element
Electrode
Ag-Pd cermet
RuO2 cermet
Multi metal alloy
Epoxy
Resistive element
Wiper
2 k
Adhesive
5 k
Rubber cushion
Silicone rubber
PA (Polyamide)
10 k
20 k
50 k
100 k
200 k
500 k
1 M
2 M
10 Rotor gear
UL-94HB
CFC’s, Halon, Carbon tetrachloride and designated bromic flame
retardant PBBOs and PBBs are not used in our products.
158
1
!
0
200
2
200
200
200
9
3
The products indicated by * mark are manufactured upon
receipt oforer basis
8
4
7
6
5
LIST OF PART NUMBERS
Form of packing
Magazine (stick)
Taping (reel)
Vinyl bag
Adjustment
position
Shape of terminal
Sn-Pb
Sn (Lead
Sn-Pb
Sn (Lead
(Pb)-free)
Sn-Pb
Sn (Lead
(Pb)-free)
(Pb)-free)
ST-5ETW
ST-5ETX
ST-5ETP
ST-5ETR
Top adjustment
Side adjustment
W (Gull-wing)
X (Gull-wing)
P (Gull-wing)
R (Gull-wing)
ST-5TW
ST-5TX
ST-5TP
ST-5TR
ST-5MW
ST-5MX
ST-5MP
ST-5MR
ST-5EMW
ST-5EMX
ST-5EMP
ST-5EMR
ST-5W
ST-5X
ST-5P
ST-5R
ST-5EW
ST-5EX
ST-5EP
ST-5ER
Pieces in package
500 pcs./reel
50 pcs./reel
50 pcs./reel
FIG. 1: NOMINAL RESISTANCE VALUES
10 Ω∗
10 kΩ
20 Ω∗
20 kΩ
50 Ω
100 Ω
200 Ω
500 Ω
1 kΩ
2 kΩ
5 kΩ
50 kΩ
100 kΩ
200 kΩ
500 kΩ
1 MΩ
2 MΩ
-
The products indicated by * mark are manufactured upon
receipt of order basis.
* The above part numbers are all available with the
respective combination of <Nominal resitance values>
(Fig.1)
* Verify the above part numbers when placing orders.
* Taping specification is not sold seperately and must be
purchased in reel units.
Document Number: 58011
Revision: 10-Oct-05
For technical questions contact: copalsupport@vishay.com
www.vishay.com
5
ST-5
Surface Mount Cermet Trimmers (14 turns)
Vishay
ORDERING INFORMATION
ST-5
T
W
500Ω
(501)
RESISTANCE CODE
SERIES NAME
TEMINAL PIN
Blank: Sn-Pb
FORM OF
PACKAGING
PRODUCT
SHAPE
(SHAPE OF
TERMINAL)
RESISTANCE VALUE
T: Taping (Reel)
W: Gull wing
(Top
adjustment)
E: Sn
(Lead(Pb)-free)
M: Magazine (Stick)
X: Gull wing
(Side
adjustment)
Blank: Bulk in vinyl
bags
P: Gull wing
(Side
adjustment)
R: Gull wing
(Side
adjustment)
This product is manufactured by Copal Electronic Co. Ltd. of Tokyo, Japan and distributed by Vishay in North and South America only.
This product is not available from Vishay outside of North or South America.
Document Number: 58011
Revision: 10-Oct-05
For technical questions contact: copalsupport@vishay.com
www.vishay.com
6
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明