ST173C12CHK0P [VISHAY]
Inverter Grade Thyristors (Hockey PUK Version), 330 A; 逆变器级晶闸管（曲棍球PUK版） ， 330
| 型号： | ST173C12CHK0P |
| 厂家： | 
VISHAY |
| 描述： | Inverter Grade Thyristors (Hockey PUK Version), 330 A |
| 文件： | 总9页 (文件大小：147K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ST173CPBF Series
Vishay High Power Products
Inverter Grade Thyristors
(Hockey PUK Version), 330 A
FEATURES
• Metal case with ceramic insulator
• All diffused design
• Center amplifying gate
• Guaranteed high dV/dt
RoHS
COMPLIANT
• International standard case TO-200AB (A-PUK)
• Guaranteed high dI/dt
TO-200AB (A-PUK)
• High surge current capability
• Low thermal impedance
• High speed performance
PRODUCT SUMMARY
TYPICAL APPLICATIONS
• Inverters
IT(AV)
330 A
• Choppers
• Induction heating
• All types of force-commutated converters
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
VALUES
330
UNITS
A
°C
A
IT(AV)
Ths
Ths
55
610
IT(RMS)
ITSM
I2t
25
°C
50 Hz
60 Hz
50 Hz
60 Hz
4680
A
4900
110
kA2s
100
V
DRM/VRRM
1000 to 1200
15 to 30
- 40 to 125
V
tq
Range
µs
°C
TJ
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
V
DRM/VRRM, MAXIMUM
V
RSM, MAXIMUM
IDRM/IRRM MAXIMUM
AT TJ = TJ MAXIMUM
mA
VOLTAGE
CODE
TYPE NUMBER
REPETITIVE PEAK VOLTAGE NON-REPETITIVE PEAK VOLTAGE
V
V
10
12
1000
1200
1100
1300
ST173C..C
40
Document Number: 94366
Revision: 29-Apr-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com
1
ST173CPBF Series
Inverter Grade Thyristors
(Hockey PUK Version), 330 A
Vishay High Power Products
CURRENT CARRYING CAPABILITY
ITM
ITM
ITM
FREQUENCY
UNITS
100 µs
180° el
180° el
1200
50 Hz
760
730
600
350
660
590
490
270
1030
1080
1030
720
5570
2800
1620
800
4920
2460
1390
680
400 Hz
1260
1200
850
A
V
1000 Hz
2500 Hz
Recovery voltage Vr
Voltage before turn-on Vd
Rise of on-state current dI/dt
Heatsink temperature
Equivalent values for RC circuit
50
VDRM
50
50
VDRM
-
50
VDRM
-
A/µs
°C
40
55
40
55
40
55
47/0.22
47/0.22
47/0.22
Ω/µF
ON-STATE CONDUCTION
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
A
330 (120)
55 (85)
610
Maximum average on-state current
at heatsink temperature
180° conduction, half sine wave
double side (single side) cooled
IT(AV)
°C
Maximum RMS on-state current
IT(RMS)
DC at 25 °C heatsink temperature double side cooled
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
4680
4900
3940
4120
110
No voltage
reapplied
A
Maximum peak, one half cycle,
non-repetitive surge current
ITSM
100 % VRRM
reapplied
Sinusoidal half wave,
initial TJ = TJ maximum
No voltage
reapplied
100
Maximum I2t for fusing
I2t
kA2s
77
100 % VRRM
reapplied
71
Maximum I2√t for fusing
I2√t
t = 0.1 to 10 ms, no voltage reapplied
1100
kA2√s
ITM = 600 A, TJ = TJ maximum,
tp = 10 ms sine wave pulse
Maximum peak on-state voltage
VTM
2.07
V
Low level value of threshold voltage
High level value of threshold voltage
Low level value of forward slope resistance
High level value of forward slope resistance
Maximum holding current
VT(TO)1
(16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum
(I > π x IT(AV)), TJ = TJ maximum
1.55
1.61
0.87
0.77
600
VT(TO)2
rt1
rt2
IH
IL
(16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum
(I > π x IT(AV)), TJ = TJ maximum
mΩ
TJ = 25 °C, IT > 30 A
mA
Typical latching current
TJ = 25 °C, VA = 12 V, Ra = 6 Ω, IG = 1 A
1000
SWITCHING
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum non-repetitive rate
of rise of turned on current
dI/dt
TJ = TJ maximum, VDRM = Rated VDRM, ITM = 2 x dI/dt
1000
A/µs
TJ = 25 °C, VDM = Rated VDRM, ITM = 50 A DC, tp = 1 µs
Resistive load, gate pulse: 10 V, 5 Ω source
Typical delay time
td
1.1
µs
TJ = TJ maximum,
minimum
Maximum turn-off time
15
30
tq
I
TM = 300 A, commutating dI/dt = 20 A/µs
R = 50 V, tp = 500 µs, dV/dt: See table in device code
maximum
V
www.vishay.com
2
For technical questions, contact: ind-modules@vishay.com
Document Number: 94366
Revision: 29-Apr-08
ST173CPBF Series
Inverter Grade Thyristors
(Hockey PUK Version), 330 A
Vishay High Power Products
BLOCKING
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
TJ = TJ maximum, linear to 80 % VDRM
higher value available on request
,
Maximum critical rate of rise of off-state voltage
dV/dt
500
V/µs
IRRM
IDRM
,
Maximum peak reverse and off-state leakage current
TJ = TJ maximum, rated VDRM/VRRM applied
40
mA
TRIGGERING
PARAMETER
SYMBOL
PGM
TEST CONDITIONS
VALUES
UNITS
Maximum peak gate power
60
10
10
20
5
TJ = TJ maximum, f = 50 Hz, d% = 50
W
A
Maximum average gate power
PG(AV)
IGM
Maximum peak positive gate current
Maximum peak positive gate voltage
Maximum peak negative gate voltage
Maximum DC gate current required to trigger
Maximum DC gate voltage required to trigger
Maximum DC gate current not to trigger
Maximum DC gate voltage not to trigger
+ VGM
- VGM
IGT
TJ = TJ maximum, tp ≤ 5 ms
V
200
3
mA
V
TJ = 25 °C, VA = 12 V, Ra = 6 Ω
VGT
IGD
20
0.25
mA
V
TJ = TJ maximum, rated VDRM applied
VGD
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
- 40 to 125
- 40 to 150
0.17
UNITS
Maximum operating junction temperature range
Maximum storage temperature range
TJ
°C
TStg
DC operation single side cooled
DC operation double side cooled
DC operation single side cooled
DC operation double side cooled
Maximum thermal resistance, junction to heatsink
RthJ-hs
0.08
K/W
0.033
Maximum thermal resistance, case to heatsink
Mounting force, 10 %
RthC-hs
0.017
4900
(500)
N
(kg)
Approximate weight
Case style
50
g
See dimensions - link at the end of datasheet
TO-200AB (A-PUK)
ΔRthJ-hs CONDUCTION
SINUSOIDAL CONDUCTION
RECTANGULAR CONDUCTION
CONDUCTION ANGLE
TEST CONDITIONS
UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180°
120°
90°
0.015
0.018
0.024
0.035
0.060
0.016
0.019
0.024
0.035
0.060
0.011
0.019
0.026
0.036
0.060
0.011
0.019
0.026
0.037
0.061
TJ = TJ maximum
K/W
60°
30°
Note
• The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC
Document Number: 94366
Revision: 29-Apr-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com
3
ST173CPBF Series
Inverter Grade Thyristors
(Hockey PUK Version), 330 A
Vishay High Power Products
130
120
130
ST173C..C Series
(Single side cooled)
RthJ-hs (DC) = 0.17 K/W
ST173C..C Series
(Double side cooled)
RthJ-hs (DC) = 0.08 K/W
120
110
100
90
110
100
90
Ø
Ø
80
Conduction angle
Conduction period
70
80
60
70
30°
80
50
60
DC
60°
60°
40
90°
120°
50
30°
30
120°
90°
180°
400
180°
200
40
20
0
40
120
160
240
0
100
200
300
500
600
700
Average On-State Current (A)
Average On-State Current (A)
Fig. 1 - Current Ratings Characteristics
Fig. 4 - Current Ratings Characteristics
130
120
110
100
90
1000
900
800
700
600
500
400
300
200
100
0
180°
120°
90°
60°
30°
ST173C..C Series
(Single side cooled)
RthJ-hs (DC) = 0.17 K/W
Ø
80
RMS limit
Conduction period
70
60
Ø
Conduction angle
50
90°
40
180°
DC
ST173C..C Series
TJ = 125 °C
30° 60°
30
120°
20
0
50
100
150
200
250
300
350
0
50 100 150 200 250 300 350 400 450
Average On-State Current (A)
Average On-state Current (A)
Fig. 2 - Current Ratings Characteristics
Fig. 5 - On-State Power Loss Characteristics
130
120
110
100
90
1400
1200
1000
800
600
400
200
0
DC
180°
120°
90°
60°
30°
ST173C..C Series
(Double side cooled)
RthJ-hs (DC) = 0.08 K/W
Ø
Conduction angle
RMS limit
80
70
30°
Ø
180°
120°
60°
Conduction period
60
90°
50
ST173C..C Series
TJ = 125 °C
40
30
0
50 100 150 200 250 300 350 400
0
100
200
300
400
500
600
700
Average On-State Current (A)
Fig. 6 - On-State Power Loss Characteristics
Average On-State Current (A)
Fig. 3 - Current Ratings Characteristics
www.vishay.com
4
For technical questions, contact: ind-modules@vishay.com
Document Number: 94366
Revision: 29-Apr-08
ST173CPBF Series
Inverter Grade Thyristors
(Hockey PUK Version), 330 A
Vishay High Power Products
1
4500
4000
3500
3000
2500
2000
At any rated load condition and with
rated VRRM applied following surge.
ST173C..C Series
Initial TJ = 125 °C
at 60 Hz 0.0083 s
at 50 Hz 0.0100 s
0.1
0.01
Steady state value
RthJ-hs = 0.17 K/W
(Single side cooled)
RthJ-hs = 0.08 K/W
(Double side cooled)
(DC operation)
ST173C..C Series
0.001
0.001
0.01
0.1
1
10
1
10
100
Square Wave Pulse Duration (s)
Fig. 10 - Thermal Impedance ZthJ-hs Characteristics
Number of Equal Amplitude Half Cycle
Current Pulses (N)
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
5000
250
Maximum non-repetitive surge current
versus pulse train duration. Control of
conduction may not be maintained.
Initial TJ = 125 °C
ITM = 500 A
ITM = 300 A
ST173C..C Series
TJ = 125 °C
4500
4000
3500
3000
2500
2000
1500
200
150
100
50
No voltage reapplied
Rated VRRM reapplied
ITM = 200 A
ITM = 100 A
ITM = 50 A
ST173C..C Series
0
0.01
0.1
1
0
20
40
60
80
100
Pulse Train Duration (s)
dI/dt - Rate of Fall of On-State Current (A/µs)
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 11 - Reverse Recovered Charge Characteristics
10 000
160
ST173C..C Series
ITM = 500 A
140
ITM = 300 A
120
ITM = 200 A
100
80
60
40
20
0
ITM = 100 A
ITM = 50 A
1000
TJ = 25 °C
ST173C..C Series
TJ = 125 °C
TJ = 125 °C
100
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
0
20
40
60
80
100
dI/dt - Rate of Fall of Forward Current (A/µs)
Fig. 12 - Reverse Recovered Current Characteristics
Instantaneous On-State Voltage (V)
Fig. 9 - On-State Voltage Drop Characteristics
Document Number: 94366
Revision: 29-Apr-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com
5
ST173CPBF Series
Inverter Grade Thyristors
(Hockey PUK Version), 330 A
Vishay High Power Products
10 000
10 000
Snubber circuit
Rs = 47 Ω
Snubber circuit
Rs = 47 Ω
Cs = 0.22 µF
VD = 80 % VDRM
Cs = 0.22 µF
VD = 80 % VDRM
500
50 Hz
200
50 Hz
200
1000
1500
100
100
1000
2500
500
400
1500
400
1000
1000
2500
3000
3000
5000
5000
ST173C..C Series
Sinusoidal pulse
TC = 40 °C
ST173C..C Series
Sinusoidal pulse
TC = 55 °C
tp
tp
100
100
10
100
1000
10 000
10
100
1000
10 000
Pulse Basewidth (µs)
Pulse Basewidth (µs)
Fig. 13 - Frequency Characteristics
10 000
1000
100
10 000
Snubber circuit
Rs = 47 Ω
Cs = 0.22 µF
VD = 80 % VDRM
Snubber circuit
Rs = 47 Ω
Cs = 0.22 µF
VD = 80 % VDRM
50 Hz
100
50 Hz
200
100
400
500
1000
1500
1000
200
400
500
1000
1500
2000
2500
3000
2000
2500
3000
ST173C..C Series
Trapezoidal pulse
TC = 40 °C
ST173C..C Series
Trapezoidal pulse
TC = 55 °C
5000
tp
tp
5000
dI/dt = 50 A/µs
dI/dt = 50 A/µs
100
10
100
1000
10 000
10
100
1000
10 000
Pulse Basewidth (µs)
Pulse Basewidth (µs)
Fig. 14 - Frequency Characteristics
10 000
1000
100
10 000
Snubber circuit
Rs = 47 Ω
Cs = 0.22 µF
VD = 80 % VDRM
50 Hz
100
50 Hz
400 200
200
100
400
500
1000
1000
100
10
500
1000
1500
2500
1500
2500
Snubber circuit
Rs = 47 Ω
Cs = 0.22 µF
VD = 80 % VDRM
3000
5000
3000
5000
10 000
ST173C..C Series
Trapezoidal pulse
TC = 40 °C
ST173C..C Series
Trapezoidal pulse
TC = 55 °C
10 000
tp
tp
dI/dt = 100 A/µs
dI/dt = 100 A/µs
10
10
100
1000
10 000
10
100
1000
10 000
Pulse Basewidth (µs)
Pulse Basewidth (µs)
Fig. 15 - Frequency Characteristics
www.vishay.com
6
For technical questions, contact: ind-modules@vishay.com
Document Number: 94366
Revision: 29-Apr-08
ST173CPBF Series
Inverter Grade Thyristors
(Hockey PUK Version), 330 A
Vishay High Power Products
100 000
10 000
1000
100
100 000
10 000
ST173C..C Series
Rectangular pulse
dI/dt = 50 A/µs
tp
20 joules per pulse
10
20 joules per pulse
5
3
2
10
5
3
1
2
0.5
1000
100
10
1
0.3
0.2
0.5
0.3
0.2
0.1
ST173C..C Series
Sinusoidal pulse
0.1
tp
10
10
100
1000
10 000
10
100
1000
10 000
Pulse Basewidth (µs)
Pulse Basewidth (µs)
Fig. 16 - Maximum On-State Energy Power Loss Characteristics
100
10
Rectangular gate pulse
(1) PGM = 10 W, tp = 20 ms
(2) PGM = 20 W, tp = 10 ms
(3) PGM = 40 W, tp = 5 ms
(4) PGM = 60 W, tp = 3.3 ms
a) Recommended load line for
rated dI/dt: 20 V, 10 Ω; tr ≤ 1 µs
b) Recommended load line for
≤ 30 % rated dI/dt: 10 V, 10 Ω
tr ≤ 1 µs
(a)
(b)
1
(1)
(2)
(3) (4)
VGD
IGD
Device: ST173C..C Series
0.1
Frequency limited by PG(AV)
10
0.1
0.001
0.01
1
100
Instantaneous Gate Current (A)
Fig. 17 - Gate Characteristics
Document Number: 94366
Revision: 29-Apr-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com
7
ST173CPBF Series
Inverter Grade Thyristors
(Hockey PUK Version), 330 A
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
ST
17
3
C
12
C
H
K
1
-
P
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
-
-
-
-
-
-
-
-
-
Thyristor
Essential part number
3 = Fast turn-off
C = Ceramic PUK
Voltage code x 100 = VRRM (see Voltage Ratings table)
C = PUK case TO-200AB (A-PUK)
dV/dt - tq combinations available
Reapplied dV/dt code (for tq test condition)
tq code
dV/dt(V/µs) 20
50
100 200 400
15
18
20
25
30
CL
CP
CK
CJ
--
--
--
--
--
--
0 = Eyelet terminals
(gate and aux. cathode unsoldered leads)
DP
DK
DJ
DH
EP
EK
EJ
EH
FP *
t (µs)
FK * HK
FJ
FH
q
HJ
HH
1 = Fast-on terminals
(gate and aux. cathode unsoldered leads)
* Standard part number.
All other types available only on request.
2 = Eyelet terminals
(gate and aux. cathode soldered leads)
3 = Fast-on terminals
(gate and aux. cathode soldered leads)
-
-
Critical dV/dt:
10
11
None = 500 V/µs (standard value)
L = 1000 V/µs (special selection)
P = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95074
www.vishay.com
8
For technical questions, contact: ind-modules@vishay.com
Document Number: 94366
Revision: 29-Apr-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
ST173C12CHK0PBF
Silicon Controlled Rectifier, 610A I(T)RMS, 1200V V(DRM), 1200V V(RRM), 1 Element, TO-200AB, METAL CASE WITH CERAMIC INSULATOR, APUK-3
INFINEON
ST173C12CHK1L
Silicon Controlled Rectifier, 610A I(T)RMS, 330000mA I(T), 1200V V(DRM), 1200V V(RRM), 1 Element, TO-200AB, METAL CASE WITH CERAMIC INSULATOR, APUK-3
INFINEON
ST173C12CHK1LPBF
Silicon Controlled Rectifier, 610A I(T)RMS, 1200V V(DRM), 1200V V(RRM), 1 Element, TO-200AB, METAL CASE WITH CERAMIC INSULATOR, APUK-3
INFINEON
ST173C12CHK1PBF
Silicon Controlled Rectifier, 610A I(T)RMS, 1200V V(DRM), 1200V V(RRM), 1 Element, TO-200AB, METAL CASE WITH CERAMIC INSULATOR, APUK-3
INFINEON
©2020 ICPDF网 联系我们和版权申明