STA47006T4MI [VISHAY]

CAPACITOR, TANTALUM, NON SOLID, POLARIZED, 6 V, 4700 uF, THROUGH HOLE MOUNT, AXIAL LEADED;
STA47006T4MI
型号: STA47006T4MI
厂家: VISHAY    VISHAY
描述:

CAPACITOR, TANTALUM, NON SOLID, POLARIZED, 6 V, 4700 uF, THROUGH HOLE MOUNT, AXIAL LEADED

文件: 总3页 (文件大小:61K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
STA  
Vishay  
www.vishay.com  
Wet Tantalum Capacitors with Hermetic Seal  
FEATURES  
• All tantalum, hermetically sealed case  
• Terminations: Axial leaded  
• Utilizes proven Vishay SuperTan® technology  
• High and stable capacitance  
• High reliability, rugged design  
• 150 μF to 4700 μF  
• 6 VDC to 15 VDC  
• - 55 °C to + 125 °C  
APPLICATIONS NOTES  
a) No continuous reverse voltage permissible.  
b) Transient reverse voltage surges are acceptable under  
the following conditions:  
Vishay STA represents a major breakthrough in Wet  
Tantalum capacitor technology. Its unique cathode system,  
also used in the ST, provides the highest capacitance per  
unit volume available. The STA combines the inherent  
reliability of wet tantalum with the capacitance stability of  
solid tantalum, and there are no circuit impedance  
restrictions. The range is exceptionally well suited for low  
voltage filtering and energy storage applications.  
The peak reverse voltage does not exceed 1.5 V and the  
peak current times the duration of the reverse transient  
does not exceed 0.05 As. In addition, the repetition  
frequency of the reverse voltage surge is less than 10 Hz.  
c) The peak of the applied AC ripple and the applied DC  
voltage must not exceed the DC voltage rating of the  
capacitor.  
d) Ripple current ratings by part number at 85 °C and  
40 kHz are included in the table. Ripple current correction  
factors for other temperatures and frequencies are given  
on the next page.  
ORDERING INFORMATION  
STA  
2700  
15  
T4  
M
I
STYLE  
CAPACITANCE  
μF  
85 °C RATED  
DC VOLTAGE  
CASE CODE  
CAPACITANCE  
TOLERANCE  
INSULATING  
SLEEVE  
M = 20 ꢀ  
K = 10 ꢀ  
I = Insulated  
X = Uninsulated  
DIMENSIONS in inches [millimeters]  
Terminal welded  
0.025 + 0.002  
(0.64 + 0.05)  
to case  
0.250 (6.35)  
MAX.  
0.094 (2.38)  
MAX.  
Terminal location  
within 0.031 of center  
“D” Dia.  
E
L
E
L + 0.031/- 0.01ꢀ  
CASE CODE  
D MAX. INSULATED  
D
0.01ꢀ [0.41] UNINSULATED  
E
0.250 [ꢀ.35]  
[+ 0.79/- 0.41]  
0.453 [11.51]  
0.641 [16.28]  
0.766 [19.46]  
1.062 [26.97]  
T1  
T2  
T3  
T4  
0.219 [5.56]  
0.312 [7.92]  
0.406 [10.31]  
0.406 [10.31]  
0.188 [4.78]  
0.281 [7.14]  
0.375 [9.52]  
0.375 [9.52]  
1.500 [38.10]  
2.250 [57.15]  
2.250 [57.15]  
2.250 [57.15]  
Notes  
Material at egress is tantalum.  
Approx. weight  
T1: 2.3 g, T2: 5.7 g  
T3: 9.4 g, T4: 14.8 g  
Insulation sleeving will lap over the ends of the capacitor case.  
Tinned nickel leads, solderable and weldable.  
Revision: 16-Mar-12  
Document Number: 43013  
1
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
STA  
Vishay  
www.vishay.com  
STANDARD RATINGS  
MAX. IMP  
MAX.  
AC RIPPLE  
85 °C  
40 kHz  
(mA)  
RMS  
CAPACITANCE  
AT 25 °C  
120 Hz  
MAX. ESR  
MAX. DCL  
(μA)  
MAX. DF AT - 55 °C CAPACITANCE  
AT 120 Hz  
(%)  
CASE  
CODE  
()  
AND  
120 Hz  
()  
CHANGE (%)  
PART NUMBER  
(μF)  
120 Hz 140 Hz 25 °C 85 °C  
- 55 °C 85 °C  
ꢀ VDC AT 85 °C  
470  
T1  
T2  
T3  
T4  
0.9  
0.7  
0.5  
0.3  
0.4  
0.3  
0.2  
0.2  
1
3
3
8
46  
12  
9
- 75  
- 80  
- 90  
- 90  
+ 10  
+ 10  
+ 18  
+ 18  
1500  
2200  
2800  
3500  
STA470-6T1MI  
STA1500-6T2MI  
STA3300-6T3MI  
STA4700-6T4MI  
1500  
3300  
4700  
101  
150  
155  
8
30  
35  
7
10  
5
10 VDC AT 85 °C  
330  
T1  
T2  
T3  
T4  
1.0  
0.8  
0.5  
0.4  
0.5  
0.3  
0.3  
0.2  
1
3
5
8
3
35  
15  
8
- 70  
- 80  
- 85  
- 85  
+ 8  
1400  
2200  
2800  
3500  
STA330-10T1MI  
STA1000-10T2MI  
STA2200-10T3MI  
STA3300-10T4MI  
1000  
2200  
3300  
10  
30  
30  
70  
+ 10  
+ 15  
+ 18  
109  
6
119  
3
15 VDC AT 85 °C  
150  
680  
T1  
T2  
T3  
T4  
1.1  
0.8  
0.6  
0.4  
0.5  
0.3  
0.2  
0.2  
1
2
5
4
3
16  
49  
25  
10  
9
- 45  
- 65  
- 80  
- 80  
+ 8  
1400  
2200  
2700  
3400  
STA150-15T1MI  
STA680-15T2MI  
STA1500-15T3MI  
STA2700-15T4MI  
10  
25  
25  
+ 10  
+ 10  
+ 15  
1500  
2700  
81  
109  
4
RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE, AND APPLIES PEAK VOLTAGE  
FREQUENCY OF  
APPLIED RIPPLE  
CURRENT  
120 Hz  
800 Hz  
1 kHz  
10 kHz  
40 kHz  
100 kHz  
AMBIENT STILL  
AIR TEMP. IN °C  
55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125  
100 ꢀ 0.60 0.39  
90 ꢀ 0.60 0.46  
-
-
-
-
-
-
0.71 0.43  
0.71 0.55  
-
-
-
-
-
-
0.72 0.46  
0.72 0.55  
-
-
-
-
-
-
0.88 0.55  
0.88 0.67  
-
-
-
-
-
-
1.0 0.63  
1.0 0.77  
-
-
-
-
-
-
1.1 0.69  
1.1 0.85  
-
-
-
-
-
-
% of  
85 °C  
rated  
peak  
80 ꢀ 0.60 0.52 0.35  
70 ꢀ 0.60 0.58 0.44  
0.71 0.62 0.42  
0.71 0.69 0.52  
0.72 0.62 0.42  
0.72 0.70 0.52  
0.88 0.76 0.52  
0.88 0.85 0.64  
1.0 0.87 0.59  
1.0 0.97 0.73  
1.1 0.96 0.65  
1.1 1.07 0.80  
voltage  
66 2/3 ꢀ 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50  
Revision: 16-Mar-12  
Document Number: 43013  
2
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular  
product with the properties described in the product specification is suitable for use in a particular application. Parameters  
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All  
operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please  
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Material Category Policy  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the  
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council  
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment  
(EEE) - recast, unless otherwise specified as non-compliant.  
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that  
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free  
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference  
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21  
conform to JEDEC JS709A standards.  
Revision: 02-Oct-12  
Document Number: 91000  
1

相关型号:

STA4706T1MI

CAPACITOR, TANTALUM, NON SOLID, POLARIZED, 6V, 470uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY

STA471A

NPN Darlington With built-in avalanche diode
SANKEN

STA471A

Power Bipolar Transistor, 2A I(C), 50V V(BR)CEO, 4-Element, NPN, Silicon, Plastic/Epoxy, 10 Pin, STA, 10 PIN
ALLEGRO

STA471A_06

NPN Darlington With built-in avalanche diode
SANKEN

STA472A

PNP Darlington General purpose
SANKEN

STA472A

Power Bipolar Transistor, 2A I(C), 60V V(BR)CEO, 4-Element, PNP, Silicon, Plastic/Epoxy, 10 Pin, STA400, 10 PIN
ALLEGRO

STA472A_06

PNP Darlington General purpose
SANKEN

STA473

NPN Darlington General purpose
SANKEN

STA473A

NPN Darlington General purpose
SANKEN

STA473A_06

NPN Darlington General purpose
SANKEN

STA474A

PNP + NPN Darlington H-bridge
SANKEN

STA475A

NPN Darlington With built-in avalanche diode
SANKEN