T22C686K050CZS [VISHAY]
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic Seal;
| 型号： | T22C686K050CZS |
| 厂家： | 
VISHAY |
| 描述： | Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic Seal |
| 文件： | 总10页 (文件大小：158K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
T22
Vishay
www.vishay.com
Wet Tantalum SMD Capacitors, Tantalum Metal Case With
Glass-to-Tantalum Hermetic Seal
FEATURES
• Advanced SMD packaging with high volumetric
efficiency, patents pending
Available
Available
• Enhanced performance, high reliability design
• SMD, standard tin / lead (Sn / Pb), 100 ꢀ tin
(RoHS-compliant) available
• Mounting: surface-mount
Available
LINKS TO ADDITIONAL RESOURCES
•
Increased thermal shock capability of 300 cycles
3
D
• Designed for the avionics and aerospace applications
3D Models
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
Note
(to +125 °C with voltage derating)
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
DC Leakage Current (DCL Max.): at +25 °C and above:
leakage current shall not exceed the values listed in the
Standard Ratings table.
Capacitance Range: 10 μF to 68 μF
Capacitance Tolerance: 10 ꢀ, 20 ꢀ standard
Voltage Rating: 50 VDC to 125 VDC
ORDERING INFORMATION
T22
C
686
K
050
E
S
S
TYPE
CASE
CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT +85 °C
TERMINATION /
PACKAGING
RELIABILITY
GRADE
ESR
See
Ratings
and
Case
Codes
table
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
K = 10 ꢀ
M = 20 ꢀ
This is expressed
in volts. To
Sn / Pb solder
E = 7" (178 mm) reel
L = 7" (178 mm),
1/2 reel
S = 48 h
burn-in
Z = non-
established
reliability
S =
standard
complete the
three-digit block,
zeros precede the
voltage rating.
A decimal point is
indicated by an
“R” (6R3 = 6.3 V).
R = 7" (178 mm),
partial reel
100 % tin
C = 7" (178 mm), reel
H = 7" (178 mm),
1/2 reel
U = 7" (178 mm),
partial reel
DIMENSIONS in inches [millimeters]
TW
TW
H
W
L1
L
P
P
WEIGHT
g
(AVERAGE)
CASE CODE
L (MAX.)
L1
W
H
P
TW
0.279 0.008
[7.1 0.2]
0.291 0.008
[7.4 0.2]
0.098 0.008
[2.5 0.2]
0.197 0.008
[5.0 0.2]
0.354
[9.0]
0.303 0.008
[7.7 0.2]
C
2.40
Revision: 13-May-2020
Document Number: 40187
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T22
Vishay
www.vishay.com
MARKING
VOLTAGE CODE
V
50
CODE
Polarity mark
T
S
R
Capacitance
Voltage
Week
686T
YYXX
75
Year
100
Trademark
2
125
B
STANDARD RATINGS
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%)
AC
CAPACITANCE
MAX. ESR MAX. IMP.
RIPPLE
+85 °C
40 kHz
AT +25 °C
120 Hz
(μF)
CASE
CODE
AT +25 °C AT -55 °C
PART NUMBER
+85 °C
120 Hz
120 Hz
()
+25 °C
AND
-55 °C +85 °C +125 °C
()
(mARMS
1650
1310
1030
832
)
+125 °C
50 VDC AT +85 °C; 30 VDC AT +125 °C
T22C686(1)050(2)(3)(4) 1.50 35
75 VDC AT +85 °C; 50 VDC AT +125 °C
T22C336(1)075(2)(3)(4) 2.50 66
100 VDC AT +85 °C; 65 VDC AT +125 °C
T22C156(1)100(2)(3)(4) 3.50 125
125 VDC AT +85 °C; 85 VDC AT +125 °C
T22C106(1)125(2)(3)(4) 5.50 175
68
33
15
10
C
C
C
C
1
5
5
5
5
-25
-25
-18
-15
8
5
3
3
15
9
1
1
10
10
1
Note
Part number definitions:
•
(1) Capacitance tolerance: K, M
(2) Termination and packaging: C, H, E, L, R, U
(3) Reliability level: Z, S
(4) ESR: S
POWER DISSIPATION
CASE CODE
MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR
C
0.9
STANDARD PACKAGING QUANTITY
UNITS PER REEL
CASE CODE
7" FULL REEL
100
7" HALF REEL
7" PARTIAL REEL
C
50
25
Revision: 13-May-2020
Document Number: 40187
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T22
Vishay
www.vishay.com
TAPE AND REEL PACKAGING in inches [millimeters]
0.157 0.004
[4.0 0.10]
10 pitches cumulative
tolerance on tape
0.008 [0.200]
T2
(max.)
Deformation
between
embossments
0.059 + 0.004 - 0.0
[1.5 + 0.10 - 0.0]
Embossment
0.024
[0.600]
max.
0.079 0.002
[2.0 0.05]
0.069 0.004
[1.75 0.10]
Top
cover
tape
A0
0.030 [0.75]
min. (3)
20°
F
W
B1 (max.) (6)
K0
Top
cover
tape
Maximum
component
rotation
B0
P1
0.030 [0.75]
min. (4)
(Side or front sectional view)
Center lines
of cavity
For tape feeder
reference only
including draft.
D1 (min.) for components
0.004 [0.10]
max.
(5)
.
0.079 x 0.047 [2.0 x 1.2] and larger
USER DIRECTION
OF FEED
Maximum
cavity size (1)
Concentric around B0
Cathode (-)
R minimum:
16 mm = 1.181" (30 mm)
R
min.
Anode (+)
DIRECTION OF FEED
Bending radius (2)
3.937 [100.0]
20° maximum
component rotation
0.039 [1.0]
max.
Typical
component
Tape
cavity
center line
0.039 [1.0]
B0
max.
0.9843 [250.0]
Typical
Camber
component
center line
(Top view)
A0
(Top view)
Allowable camber to be 0.039/3.937 [1/100]
Non-cumulative over 9.843 [250.0]
Notes
•
(1)
Metric dimensions will govern. Dimensions in inches are rounded and for reference only.
A0, B0, K0, are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent
rotation of the component within the cavity of not more than 20°.
(2)
(3)
(4)
(5)
(6)
Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide
“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum.
This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed
cavities or to the edge of the cavity whichever is less.
This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier
tape between the embossed cavity or to the edge of the cavity whichever is less.
The embossed hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location shall be applied independent of each other.
B1 dimension is a reference dimension tape feeder clearance only.
CARRIER TAPE DIMENSIONS in inches [millimeters]
TAPE WIDTH
W
P2
F
E1
E2 MIN.
0.630 + 0.012 / - 0.004
[16.0 + 0.3 / - 0.1]
0.079 0.004
[2.0 0.1]
0.295 0.004
[7.5 0.1]
0.069 0.004
[1.75 0.1]
0.561
[14.25]
16 mm
Revision: 13-May-2020
Document Number: 40187
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T22
Vishay
www.vishay.com
CARRIER TAPE DIMENSIONS in inches [millimeters]
TAPE WIDTH W
TYPE
CASE CODE
P1
K0 MAX.
B1 MAX.
(mm)
0.476 0.004
[12.0 0.1]
0.31
[7.9]
0.45
[11.3]
T22
C
16
RECOMMENDED REFLOW PROFILES
Capacitors should withstand reflow profile as per J-STD-020 standard
TP
TC - 5 °C
tp
Max. ramp-up rate = 3 °C/s
Max. ramp-down rate = 6 °C/s
TL
tL
Ts max.
Preheat area
Ts min.
ts
25
Time 25 °C to peak
TIME (s)
PROFILE FEATURE
Preheat / soak
SnPb EUTECTIC ASSEMBLY
LEAD (Pb)-FREE ASSEMBLY
Temperature min. (Ts min.
)
100 °C
150 °C
150 °C
200 °C
Temperature max. (Ts max.
)
Time (ts) from (Ts min. to Ts max.
Ramp-up
)
60 s to 120 s
60 s to 120 s
Ramp-up rate (TL to TP)
Liquidus temperature (TL)
Time (tL) maintained above TL
3 °C/s max.
183 °C
3 °C/s max.
217 °C
60 s to 150 s
220
60 s to 150 s
245
Peak package body temperature (Tp)
Time (tp) within 5 °C of the specified
classification temperature (TC)
20 s
30 s
Time 25 °C to peak temperature
Ramp-down
6 min max.
8 min max.
Ramp-down rate (TP to TL)
Time 25 °C to peak temperature
6 °C/s max.
6 min max.
6 °C/s max.
8 min max.
PAD DIMENSIONS in inches [millimeters]
D
B
C
A
CASE CODE
A (MIN.)
B (NOM.)
C (NOM.)
0.100 [2.50]
D (NOM.)
C
0.295 [7.50]
0.138 [3.50]
0.374 [9.50]
Revision: 13-May-2020
Document Number: 40187
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T22
Vishay
www.vishay.com
TYPICAL PERFORMANCE CHARACTERISTICS OF T22 CAPACITORS
ELECTRICAL PERFORMANCE CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
-55 °C to +85 °C (to +125 °C with voltage derating)
20 ꢀ, 10 ꢀ at +25 °C, 120 Hz
Category temperature range
Capacitance tolerance
Capacitance change by temperature Limit per Standard Ratings table
ESR
Limit per Standard Ratings table, at +25 °C, 120 Hz
Impedance
Limit per Standard Ratings table, at -55 °C, 120 Hz
Limit per Standard Ratings table
DCL (leakage current)
AC ripple current
Reverse voltage
Limit per Standard Ratings table, at +85 °C and 40 kHz
Reverse voltage shall be in accordance with MIL-PRF-39006, paragraphs 3.23 and 4.8.19, except DC
potential will be maximum of 3 V
Maximum operating voltage
OPERATING TEMPERATURE
+85 °C
+125 °C
RATED VOLTAGE
SURGE VOLTAGE
(VDC
DERATED VOLTAGE
(VDC
)
)
(VDC
)
50
57.5
86.2
30
75
50
100
125
115.0
144.0
65
85
Surge voltage
The DC surge voltage is the maximum voltage to which the capacitor can be subjected under any
conditions including transients and peak ripple at the highest line voltage.
The DC surge voltage is 115 ꢀ of rated DC voltage
PERFORMANCE CHARACTERISTICS
ITEM
CONDITION
POST TEST PERFORMANCE
Surge voltage In accordance with MIL-PRF-39006:
85 °C 1000 successive test cycles at
the applicable DC surge voltage
Capacitance change
Leakage current
Within 10 ꢀ of initial measured value
Not to exceed specified value
specified in series with a 1 k resistor
at the rate of 30 s ON, 5.5 min OFF
Life testing
In accordance with MIL-PRF-39006:
capacitors shall be capable of
Capacitance change
Leakage current at 85 °C / 125 °C Not to exceed 125 ꢀ of initial specified value
+10 ꢀ / -20 ꢀ of initial measured value
withstanding a 2000 h life test at a
Leakage current at 25 °C
Not to exceed specified value
temperature +85 °C at rated voltage, ESR
or a 2000 h life test at a temperature
+125 °C at derated voltage
Not to exceed 200 ꢀ of specified value
AC ripple life
In accordance with MIL-PRF-39006: 2000 h, +85 °C
Revision: 13-May-2020
Document Number: 40187
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T22
Vishay
www.vishay.com
ENVIRONMENTAL CHARACTERISTICS
ITEM
CONDITION
POST TEST PERFORMANCE
Stability at low and
high temperatures
As specified in MIL-PRF-39006
The capacitors shall meet the requirements of MIL-PRF-39006
Seal
MIL-PRF-39006
Method 112 of MIL-STD-202,
conditions A and C
When the capacitors are tested as specified in MIL-PRF-39006,
there shall be no evidence of leakage.
Moisture resistance
MIL-PRF-55365
DC leakage
Not exceed 125 ꢀ of the specified value
Method 106 of MIL-STD-202,
Capacitance change Within 10 ꢀ of the initial measured value
number of cycles: 10 continuous cycles except ESR
Not exceed the specified value
that steps 7a and 7b shall be omitted.
Barometricpressure Method 105 of MIL-STD-202, condition E
There shall be no mechanical or visual damage to capacitors
post-conditioning.
(reduced)
(150 000 feet) (45,720.1 m).
Low temperature
storage
MIL-PRF-39006
Method 502 of MIL-STD-810,
Storage temperature: - 62 °C + 0 °C, - 3 °C
Exposure time: 72 h followed by a 1 h exposure
at + 125 °C + 7 °C, - 0 °C within 24 h after low
temperature storage.
DC leakage
Capacitance change Within 10 ꢀ of the initial measured value
ESR Not exceed the specified value
Not to exceed 125 ꢀ of the specified value
Salt atmosphere
(corrosion)
MIL-PRF-39006
Method 101 of MIL-STD-202,
condition B (48 h), applicable salt solution: 5 ꢀ
There shall be no harmful corrosion. Marking shall remain legible.
MECHANICAL PERFORMANCE CHARACTERISTICS
ITEM
CONDITION
POST TEST PERFORMANCE
Shear test
AEC-Q200-006
DC leakage
Capacitance change Within 10 ꢀ of the initial measured value
ESR Not exceed the specified value
Not to exceed 125 ꢀ of the specified value
Apply a pressure load of 5 N for 10 s 1 s
horizontally to the center of capacitor
side body.
There shall be no mechanical or visual damage to capacitors
post-conditioning.
Solderability
MIL-STD-202, method 208, test B
ANSI/J-STD-002:
SnPb solder - test B
All terminations shall exhibit a continuous solder coating free
from defects for a minimum of 95 ꢀ of the critical area of any
individual lead.
Pb-free solder - test B1
Resistance
to solvent
MIL-STD-202, method 215
There shall be no mechanical or visual damage to capacitors
post-conditioning. Marking shall remain legible, no degradation
of the can material.
Insulation
resistance
Method 302 of MIL-STD-202, condition B
(500 VDC 10 ꢀ)
The insulation resistance shall be not less than 100 M.
The capacitors shall meet the requirements of MIL-PRF-39006.
Shock
MIL-STD-202, method 213,condition D (500 g) The capacitors shall meet the requirements of MIL-PRF-39006.
(specified pulse)
Vibration,
high frequency
MIL-STD-202, method 204, condition H
(80 g peak)
The capacitors shall meet the requirements of MIL-PRF-39006.
The capacitors shall meet the requirements of MIL-PRF-39006.
Random vibration
Thermal shock
MIL-STD-202, method 214, condition II-G
(overall RMS 27.78 G)
MIL-STD-202, method 107, condition A
Thermal shock shall be in accordance with MIL-PRF-39006 when
tested for 300 cycles.
Resistance to
soldering heat
MIL-STD-202, method 210, condition J,
except with only one heat cycle
Capacitance change Within 10 ꢀ of initial
ESR
Initial specified value or less
Leakage current
Initial specified value or less
There shall be no mechanical or visual damage to capacitors
post-conditioning.
Revision: 13-May-2020
Document Number: 40187
6
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T22
Vishay
www.vishay.com
TYPICAL CURVES OF IMPEDANCE AS A FUNCTION OF FREQUENCY AT VARIOUS TEMPERATURES
“C” Case 50 V Capacitors
100
10
-55 °C
-40 °C
-20 °C
1.0
+25 °C
+85 °C
+125 °C
0.1
1M
100
1K
100K
10K
Frequency (Hz)
10M
PERFORMANCE CHARACTERISTICS
1. Operating Temperature: capacitors are designed to
6. Equivalent Series Resistance: measurements shall be
made by the bridge method at, or referred to, a
frequency of 120 Hz at a temperature of +25 °C. A
operate over a temperature range of -55 °C to +125 °C.
UP TO +85 °C
(V)
AT +125 °C
(V)
maximum of
measurement.
1
VRMS shall be applied during
50
75
30
50
65
85
6.1 The equivalent series resistance shall not exceed the
maximum value in ohms listed in the Standard Ratings
table for each capacitor.
100
125
6.2 The dissipation factor may be calculated from the
equivalent series resistance and capacitance values as
shown:
2. DC Working Voltage: the DC working voltage is the
maximum operating voltage for continuous duty at the
rated temperature.
2fRC
3. Surge Voltage: the surge voltage rating is the maximum
voltage to which the capacitors should be subjected
under any conditions. This includes transients and peak
ripple at the highest line voltage.
-----------------
DF =
104
where:
DF = dissipation factor in ꢀ
R = ESR in
C = capacitance in μF
3.1 The surge voltage of capacitors is 115 ꢀ of rated DC
working voltage.
3.2 Surge Voltage Test: capacitors shall withstand the
surge voltage applied through a 1000 10 ꢀ resistor
in series with the capacitor and voltage source at the
rate of one-half minute on, five and one-half minutes off,
for 1000 successive test cycles at +85 °C.
f = frequency in Hz
At 120 Hz, the above equation becomes:
R x C
13.26
--------------
DF =
3.3 Following the surge voltage test, the capacitance at
+25 °C shall not have changed by more than 10 ꢀ and
the equivalent series resistance and DC leakage current
will not exceed the values shown in the Standard
Ratings table for each capacitor.
For example, percent dissipation factor of a 30 μF, 6 V
capacitor, which has a maximum ESR of 4.0 at
+25 °C and 120 Hz, would be calculated as shown:
2 x 120 x 4 x 30
4 x 30
13.26
---------------------------------------------
---------------
= 9.05 ꢀ
DF =
=
4. Capacitance Tolerance: the capacitance of all
capacitors shall be within the specified tolerance limits
of the nominal rating.
104
7. Leakage Current: measurements shall be made at the
applicable rated working voltage at +25 °C 5 °C
4.1 Measurements shall be made by the bridge method at
or referred to a frequency of 120 Hz at a temperature of
+25 °C. The maximum voltage applied to the capacitors
during measurement shall be 1 VRMS. Measurement
accuracy of the bridge shall be within 2 ꢀ.
through application of a steady source of power, such
as a regulated power supply. A 1000 resistor to limit
the charging current shall be connected in series with
each capacitor under test. Rated working voltage shall
be applied to capacitors for 5 minutes before making
leakage current measurements.
5. Capacitance Change With Temperature: the
capacitance change with temperature shall not exceed
the values given in the Standard Ratings table for each
capacitor.
Revision: 13-May-2020
Document Number: 40187
7
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T22
Vishay
www.vishay.com
7.1 The maximum leakage current for any capacitor shall
not exceed the maximum value in μA listed in the
Standard Ratings table for each capacitor.
Note
10. Ripple Life Test at +85 °C: capacitors shall be tested
in
accordance
with
military
specification
MIL-PRF-39006 except that:
a) Operation conditions: this test shall be run at a
frequency of 40 kHz 2 kHz sinusoidal and at the
RMS ripple current levels specified in the Standard
Ratings table.
b) Applied DC voltage shall be reduced so that the
peak AC voltage plus DC voltage shall not exceed
the rated voltage of the capacitor in either the
forward or reverse direction.
•
Leakage current varies with applied voltage. See graph next
column for the appropriate adjustment factor
8. Low Temperature Impedance: the impedance of any
capacitor at -55 °C at 120 Hz, shall not exceed the
values given in the Standard Ratings table.
9. Life Test: capacitors are capable of withstanding a
2000 h life test at a temperature of +85 °C or +125 °C at
the applicable rated DC working voltage.
10.1 When tested as specified above, capacitors shall meet
the following requirements:
a) The DC leakage current at +25 °C and at +85 °C
shall not exceed the original requirements.
b) The capacitance shall not change more than 15 ꢀ
from the initial measured value.
c) The dissipation factor shall not exceed the original
requirements.
d) Visual examination: There shall be no damage,
obliteration of marking or leakage of electrolyte.
9.1 Following the life test, the capacitors shall be returned
to 25 °C
5 °C. The leakage current, measured at
the +85 °C rated voltage, shall not be in excess of
the original requirement; the capacitance value shall
not exceed 150 ꢀ of the initial requirement; the
capacitance value shall not change more than + 10 ꢀ /
- 20 ꢀ from the initial measurement.
TYPICAL LEAKAGE CURRENT FACTOR
RANGE
GUIDE TO APPLICATION
1. AC Ripple Current: subjecting a capacitor to an AC
voltage causes an AC current to flow through it. The
amplitude of the current is dependent on the impedance
of the capacitor at the frequency of the applied signal:
1.0
0.9
0.8
V
Z
0.7
0.6
---
I =
0.5
0.4
where:
I = ripple current
V = applied AC voltage
0.3
0.2
Z = impedance of capacitor (frequency dependent)
This current causes heating in the capacitor because of
I2R losses (R is the equivalent series resistance at the
applied frequency). This heating or power dissipation, is
one of the limiting factors of the capacitor’s ripple current
rating.
0.1
These power dissipation ratings are based on a
calculated +50 °C internal temperature rise in still air. The
maximum allowable ripple currents given in the Standard
Ratings table are based on these ratings and the
maximum equivalent series resistance at that frequency.
0.09
0.08
0.07
0.06
The relationship is written as follows:
0.05
0.04
P = I2R
where:
0.03
0.02
P = maximum power
I = maximum ripple current
R = equivalent series resistance
Therefore:
P
R
0.01
I = ---
0
10 20 30 40 50 60 70 80 90 100
where:
PERCENT OF RATED VOLTAGE
R is in
P is in W
I is in ARMS
Revision: 13-May-2020
Document Number: 40187
8
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T22
Vishay
www.vishay.com
2. AC Ripple Voltage: in operation, the peak voltage
across the capacitor (DC working voltage plus peak
ripple voltage) must not exceed the rated working
voltage of the capacitor. The DC component of the
applied voltage should be sufficiently large to prevent
polarity reversal in excess of 3 V at +85 °C or 2 V at
125 °C.
TYP. ESR AS A FUNCTION OF FREQUENCY
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
There will be a point at the lower frequency and
capacitance values when the peak AC voltage will be
the limiting factor on the ripple current - not its heating
effects.
3. Ripple Current Multipliers: the Standard Ratings table
list the maximum permissible RMS ripple current at
40 kHz for each rating. These values are based on the
maximum power dissipation allowed at that frequency.
10
100
1K
10K
40K 100K
1M
FREQUENCY (Hz)
This ripple current, will cause heating, which adds to the
ambient
temperature.
The
higher
ambient
temperatures, voltage derating or current derating is
required (see “Ripple Current Multipliers” table). Also
shown are the multipliers for ripple currents at various
frequencies, caused by the frequency dependence of
the (ESR) equivalent series resistance. (see “Typical
ESR as a Function of Frequency” chart)
RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE AND APPLIES PEAK VOLTAGE
FREQUENCY
OF APPLIED
120 Hz
800 Hz
1 kHz
10 kHz
40 kHz
100 kHz
RIPPLE
CURRENT
AMBIENT STILL
AIR TEMP. IN °C
55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125
100 ꢀ 0.60 0.39
90 ꢀ 0.60 0.46
-
-
-
-
-
-
0.71 0.43
0.71 0.55
-
-
-
-
-
-
0.72 0.46
0.72 0.55
-
-
-
-
-
-
0.88 0.55
0.88 0.67
-
-
-
-
-
-
1.0 0.63
1.0 0.77
-
-
-
-
-
-
1.1 0.69
1.1 0.85
-
-
-
-
-
-
% of
85 °C
rated
peak
80 ꢀ 0.60 0.52 0.35
70 ꢀ 0.60 0.58 0.44
0.71 0.62 0.42
0.71 0.69 0.52
0.72 0.62 0.42
0.72 0.70 0.52
0.88 0.76 0.52
0.88 0.85 0.64
1.0 0.87 0.59
1.0 0.97 0.73
1.1 0.96 0.65
1.1 1.07 0.80
voltage
66 2/3 ꢀ 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50
Revision: 13-May-2020
Document Number: 40187
9
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019
Document Number: 91000
1
相关型号：
T22C686K050ESS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686K050EZS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686K050HSS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686K050HZS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686K050LSS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686K050LZS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686K050RSS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686K050RZS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686K050USS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686K050UZS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686M050CSS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
T22C686M050CZS
Wet Tantalum SMD Capacitors, Tantalum Metal Case With Glass-to-Tantalum Hermetic SealWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明