T34C107K125BZ8S [VISHAY]

Wet Tantalum High Performance HI-TMPÂ® Capacitors;


型号：	T34C107K125BZ8S
厂家：	VISHAY
描述：	Wet Tantalum High Performance HI-TMPÂ® Capacitors
文件：	总5页 (文件大小：104K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

T34

Vishay

www.vishay.com

Wet Tantalum High Performance HI-TMP^®Capacitors

for -55 °C to +200 °C Operation

FEATURES

• High capacitance, high performance (shock

and vibration)

Available

• Hermetically sealed, tantalum case

• +200 °C high temperature

• Terminations: axial, standard tin / lead (SnPb)

• 100 ꢀ tin (RoHS-compliant) available

• Mounting: through-hole

Available

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

PERFORMANCE CHARACTERISTICS

Note

Operating Temperature: -55 °C to +85 °C

(to +200 °C with voltage derating)

This datasheet provides information about parts that are

RoHS-compliant and / or parts that are non RoHS-compliant. For

example, parts with lead (Pb) terminations are not RoHS-compliant.

Please see the information / tables in this datasheet for details

Capacitance Tolerance: at 120 Hz, +25 °C;

standard; 10 ꢀ

20 ꢀ

DC Leakage Current (DCL Max.): at +25 °C and above:

leakage current shall not exceed the values listed in the

Standard Ratings tables.

APPLICATIONS

• Industrial

• Petroleum exploration

• High temperature / high stress environment

Life Test: capacitors are capable of withstanding life test at

200 °C at the applicable derated DC working voltage.

ORDERING INFORMATION

T34

107

125

MODEL

CASE

CODE

CAPACITANCE CAPACITANCE

TOLERANCE

DC VOLTAGE

RATING

AT + 85 °C

TERMINATION

AND PACKAGING

RELIABILITY

LEVEL

STYLE

NUMBER

ESR

See

Standard

Ratings

table

This is

K = 10 ꢀ

M = 20 ꢀ

This is expressed

in volts. To

complete the

three-digit block,

zeros precede

the voltage rating

A = 100 ꢀ tin

(RoHS compliant),

bulk

B = std.,

tin / lead, bulk

Z = non-ER

High

temperature

8 = no outer

insulating

sleeve

S = std.

L = low

expressed in

picofarads.

The first two

digits are the

significant

6 = high

figures. The

third is the

number of

temperature

film insulation

(above

zeros to follow

+125 °C)

Note

Packaging: The use of formed plastic trays for packing bulk components is standard

•

Revision: 17-Jun-2021

Document Number: 40228

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T34

Vishay

www.vishay.com

DIMENSIONS in inches [millimeters]

L₁

0.0253 0.002 ꢀ0.ꢁ6 0.05ꢂ dia.

(No. 22 AWG tinned nickel leads

solderable and weldable)

Weld

Tantalum

L₂

CASE CODE

WEIGHT (g)

(1)

L₁

L₂(Max.)

(Max.)

TYPE T34

CLR 79 / 81 EQUIV.

0.188 0.016

[4.78 0.41]

0.453 + 0.031 / - 0.016

[11.51 + 0.79 / - 0.41]

0.734

[18.64]

1.500 0.250

[38.10 6.35]

2.6

0.281 0.016

[7.14 0.41]

0.375 0.016

[9.53 0.41]

0.375 0.016

[9.53 0.41]

0.641 + 0.031 / - 0.016

[16.28 + 0.79 / - 0.41]

0.766 + 0.031 / - 0.016

[19.46 + 0.79 / - 0.41]

1.062 + 0.031 / - 0.016

[26.97 + 0.79 / - 0.41]

0.922

2.250 0.250

[57.15 6.35]

2.250 0.250

[57.15 6.35]

2.250 0.250

[57.15 6.35]

6.2

[23.42]

1.047

[26.59]

1.343

[34.11]

11.6

17.7

Note

(1)

For insulated parts, add 0.015 inches [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body

STANDARD RATINGS

CAPACITANCE

AT 25 °C

120 Hz

MAX. DCL

(μA)

MAX. ESR

120 Hz

(Ω)

LIFE TEST

PERFORMANCE

(h AT +200 °C)

V_DC

AT 200 °C

CASE

CODE

PART NUMBER

25 °C

85 °C / 125 °C

(μF)

50 V_DCAT +85 °C

220

470

680

1500

T34A686(1)050(2)(3)(4)S

T34B227(1)050(2)(3)(4)S

T34C477(1)050(2)(3)(4)(S

T34D687(1)050(2)(3)(4)S

T34D158(1)050(2)(3)(4)S

2.5

0.9

0.75

0.7

1000

2000

1000

500

0.5

110

60 V_DCAT +85 °C

T34A476(1)060(2)(3)(4)S

T34B157(1)060(2)(3)(4)S

T34C397(1)060(2)(3)(4)S

T34D567(1)060(2)(3)(4)S

2.0

1.5

0.9

0.8

1000

150

390

560

75 V_DCAT +85 °C

T34A336(1)075(2)(3)(4)S

T34A686(1)075(2)(3)(4)S

T34B117(1)075(2)(3)(4)S

T34B227(1)075(2)(3)(4)S

T34C337(1)075(2)(3)(4)S

T34D477(1)075(2)(3)(4)S

T34D108(1)075(2)(3)(4)S

2.5

3.0

1.3

1.8

1.0

0.9

0.7

2000

500

110

220

330

470

1000

1500

1000

100 V_DCAT +85 °C

150

220

400

470

560

750

D ⁽¹⁾

T34A156(1)100(2)(3)(4)S

T34A336(1)100(2)(3)(4)S

T34B686(1)100(2)(3)(4)S

T34B157(1)100(2)(3)(4)S

T34D227(1)100(2)(3)(4)S

T34D407(1)100(2)(3)(4)S

T34D477(1)100(2)(3)(4)S

T34D567(1)100(2)(3)(4)S

T34D757(1)100(2)(3)(4)S

3.5

3.0

2.1

1.3

1.2

0.8

0.7

1.0

0.7

7.5

1000

2000

1000

1500

1000

500

150

200

150

Notes

•

Part number definitions:

(1) Capacitance tolerance: K, M

(2) Termination and packaging: A = 100 ꢀ tin, bulk; B = std., tin / lead, bulk

(3) Reliability level: Z = non-ER

(4) Style number: 6 = high temperature film insulation, 8 = no film insulation

Requires export license for shipments outside the US. Contact marketing for availability

(1)

Revision: 17-Jun-2021

Document Number: 40228

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T34

Vishay

www.vishay.com

STANDARD RATINGS

CAPACITANCE

AT 25 °C

120 Hz

MAX. DCL

(μA)

MAX. ESR

120 Hz

(Ω)

LIFE TEST

PERFORMANCE

(h AT +200 °C)

V_DC

AT 200 °C

CASE

CODE

PART NUMBER

25 °C

85 °C / 125 °C

(μF)

125 V_DCAT +85 °C

T34A106(1)125(2)(3)(4)S

T34B476(1)125(2)(3)(4)S

T34C107(1)125(2)(3)(4)S

T34D157(1)125(2)(3)(4)S

T34D247(1)125(2)(3)(4)S

T34D357(1)125(2)(3)(4)S

5.5

2.3

1.8

1.6

1.0

0.8

250

1000

2000

100

150

240

350

Notes

•

Part number definitions:

(1) Capacitance tolerance: K, M

(2) Termination and packaging: A = 100 ꢀ tin, bulk; B = std., tin / lead, bulk

(3) Reliability level: Z = non-ER

(4) Style number: 6 = high temperature film insulation, 8 = no film insulation

Requires export license for shipments outside the US. Contact marketing for availability

(1)

TYPICAL PERFORMANCE CHARACTERISTICS OF T34 CAPACITORS

ELECTRICAL CHARACTERISTICS

ITEM

PERFORMANCE CHARACTERISTICS

-55 °C to +85 °C (to +200 °C with voltage derating)

20 ꢀ, 10 ꢀ at 120 Hz, at +25 °C

Operating temperature range

Capacitor tolerance

Capacitor change by temperature

ESR

Limit per Standard Ratings table

Limit per Standard Ratings table, at +25 °C, 120 Hz

Limit per Standard Ratings table

DCL (leakage current)

There shall be no continuous reverse voltage. Transient reverse voltage surges are acceptable under

the following conditions:

Reverse voltage

Surge voltage

a) The peak reverse voltage is equal to or less than 1.5 V and the product of the peak current times

the duration of the reverse transient is 0.05 As or less

b) The repetition rate of the reverse voltage surges is less than 10 Hz

The DC rated surge voltage is the maximum voltage to which the capacitors can be subjected under

any conditions including transients and peak ripple at the highest line voltage.

The DC surge voltage is 115 ꢀ of rated DC voltage.

RECOMMENDED VOLTAGE VS. TEMPERATURE DERATING

0.6 RV Derating

0.5 RV Derating

120

100

10000

1000

100

120

100

10000

1000

100

Temp.

25 °C

85 °C

125 °C

150 °C

175 °C

200 °C

Temp.

25 °C

85 °C

125 °C

150 °C

175 °C

200 °C

100 ꢀ

67 ꢀ

65 ꢀ

62 ꢀ

60 ꢀ

100 ꢀ

67 ꢀ

61 ꢀ

56 ꢀ

50 ꢀ

125

200

125

200

Temperature (°C)

Revision: 17-Jun-2021

Document Number: 40228

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T34

Vishay

www.vishay.com

PERFORMANCE CHARACTERISTICS

ITEM

PERFORMANCE CHARACTERISTICS

Capacitors shall be capable of withstanding life test at temperature +200 °C at derated voltage.

After the test, the capacitors shall meet the following requirements:

a) Capacitance shall be within +10 ꢀ, -20 ꢀ of the initial value

Life testing

b) ESR shall not exceed 200 ꢀ of the applicable value from “Standard Ratings” table

ENVIRONMENTAL CHARACTERISTICS

ITEM

CONDITION

COMMENTS

When the capacitors are tested as specified there will be no

evidence of leakage.

Seal

MIL-STD-202, method 112, condition C

MIL-STD-202, method 106

Moisture resistance

10 continuous cycles, 6 V_DC

Altitude 150 000 feet

Barometric pressure

(reduced)

MIL-STD-202, method 105, condition E

MECHANICAL CHARACTERISTICS

ITEM

CONDITION

COMMENTS

Shock (specified pulse)

Vibration, high frequency

Random vibration

Thermal shock

MIL-STD-202, method 213

MIL-STD-202, method 204

MIL-STD-202, method 214

MIL-STD-202, method 107

MIL-STD-202, method 208

MIL-STD-202, method 211

MIL-STD-202, method 210

MIL-STD-1276

Test condition D (500 g)

Test condition H (80 g)

Test condition II-K (53.8 g)

Test condition A, 30 cycles

ANSI / J-STD-002, test A

Condition A

Solderability

Terminal strength

Resistance to solder heat

Terminals

Condition C

Terminals shall be as specified in MIL-STD-1276. The length and

diameter of the terminals shall be as specified in Dimensions table.

All terminals shall be permanently secured internally and

externally, as applicable. All external joints shall be welded.

Marking

MIL-STD-1285

Marking of capacitors conforms to method I of MIL-STD-1285 and

include capacitance (in μF), capacitance tolerance letter, rated

voltage, date code, lot symbol and Vishay trademark.

SELECTOR GUIDES

Tantalum Selector Guide

Parameter Comparison Guide

www.vishay.com/doc?49054

www.vishay.com/doc?42088

Revision: 17-Jun-2021

Document Number: 40228

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 01-Jan-2021

Document Number: 91000

T34C107K125BZ8S [VISHAY]

相关型号：

T34C107M125AZ6L

T34C107M125AZ6S

T34C107M125AZ8L

T34C107M125AZ8S

T34C107M125BZ6L

T34C107M125BZ6S

T34C107M125BZ8L

T34C107M125BZ8S

T35

T350

T350001

T350002