T58MM226M6R3C0500 [VISHAY]
CAP TANT POLY 22UF 6.3V SMD;型号: | T58MM226M6R3C0500 |
厂家: | VISHAY |
描述: | CAP TANT POLY 22UF 6.3V SMD |
文件: | 总17页 (文件大小:627K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T58
Vishay
www.vishay.com
vPolyTanTM Polymer Surface Mount Chip Capacitors,
Compact, Leadframeless Molded Type
FEATURES
• Low ESR
• 100 ꢀ surge current tested
• Accelerated voltage conditioning
• High ripple current capability
• High volumetric efficiency
• Stable capacitance over operating temperature,
voltage, and frequency range
• No wear out effect
• Molded case available in 5 case codes including 0603 and
0805 footprint. The molding compound has been selected
to meet the requirements of UL 94 V-0 and outgassing
requirements of ASTM E-595
LINKS TO ADDITIONAL RESOURCES
• Lead (Pb)-free L-shaped face-down terminations
• 8 mm tape and reel packaging available per EIA-481
standard
3
D
3D Models
Models
Calculators
• Moisture sensitivity level 3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PERFORMANCE / ELECTRICAL
CHARACTERISTICS
Operating Temperature: -55 °C to +105 °C
Capacitance Range: 1 μF to 330 μF
Capacitance Tolerance: 20 ꢀ
APPLICATIONS
• Decoupling, smoothing, filtering
• Bulk energy storage in wireless cards
• Infrastructure equipment
• Storage and networking
• Computer motherboards
• Smartphones and tablets
Voltage Rating: 6.3 VDC to 35 VDC
ORDERING INFORMATION
T58
MM
106
M
6R3
C
0300
TYPE
CASE
CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
TERMINATION /
PACKAGING
ESR
See
Ratings
and
Case
Codes
table.
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
M = 20 ꢀ
This is expressed in
volts. To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V)
C = lead (Pb)-free
solderable coating,
7" reel
Maximum
100 kHz ESR
in mΩ
number of zeros
to follow.
Notes
•
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating
•
We reserve the right to supply better series with more extensive screening
Revision: 13-Apr-2021
Document Number: 40189
1
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T58
Vishay
www.vishay.com
DIMENSIONS in inches [millimeters]
Anode Polarity Bar
Cathode Termination
Anode Termination
W
C
H
P1
P2
P1
L
CASE CODE
EIA SIZE
H (MAX.)
L
W
P1
P2 (REF.)
C
0.035
[0.9]
0.063 0.008
[1.6 0.2]
0.033 0.008
[0.85 0.2]
0.020 0.004
[0.5 0.1]
0.024
[0.6]
0.024 0.004
[0.6 0.1]
MM
1608-09
0.035
[0.9]
0.079 0.008
[2.0 0.2]
0.049 0.008
[1.25 0.2]
0.020 0.004
[0.5 0.1]
0.039
[1.0]
0.035 0.004
[0.9 0.1]
W9
W0
A0
2012-09
2012-10
3216-10
3528-20
0.039
[1.0]
0.079 0.008
[2.0 0.2]
0.049 0.008
[1.25 0.2]
0.020 0.004
[0.5 0.1]
0.039
[1.0]
0.035 0.004
[0.9 0.1]
0.039
[1.0]
0.126 0.008
[3.2 0.2]
0.063 0.008
[1.6 0.2]
0.031 0.004
[0.8 0.1]
0.063
[1.6]
0.047 0.004
[1.2 0.1]
0.079
[2.0]
0.138 0.008
[3.5 0.2]
0.110 0.008
[2.8 0.2]
0.031 0.008
[0.8 0.2]
0.077
[1.95]
0.094 0.004
[2.4 0.1]
BB
RATINGS AND CASE CODES (ESR mΩ)
μF
6.3 V
8.2 V
10 V
16 V
25 V
35 V
1
W9 (500)
4.7
10
W0 (500)
MM (300, 500)
MM (300, 500) /
W9 (500)
22
BB (100, 150)
47
W9 (150, 200, 300)
A0 (100, 150)
W0 (300, 500)
A0 (175) (1)
BB (90, 200)
100
Note
(1)
Rating in development: preliminary rating and electrical values. Contact factory for availability
Revision: 13-Apr-2021
Document Number: 40189
2
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T58
Vishay
www.vishay.com
MARKING
Wx-Case
Mx-Case
Voltage code
Polarity bar
Polarity bar
Voltage Capacitance
code code
+
J
J A
Ax-Case
Bx-Case
Voltage EIA capacitance
Capacitance code
Voltage code
Polarity bar
code code (pF)
Polarity
bar
330 6
+
+
J107
Vishay
marking
2
VOLTAGE CODE
CAPACITANCE CODE
V
CODE
CAP, μF
1
CODE
6.3
8.2
10
16
25
35
J
k
A
S
α
j
4.7
A
C
E
V
10
22
47
s
100
150
A
E
STANDARD RATINGS
MAX. DF MAX. ESR
AT +25 °C AT +25 °C
HIGH TEMPERATURE LOAD
MAX. DCL
AT +25 °C
(μA)
MAX. RIPPLE,
100 kHz IRMS
(A)
CAPACITANCE CASE
PART NUMBER
TEMPERATURE
(°C)
TIME
(h)
(μF)
CODE
120 Hz
(%)
100 kHz
(mΩ)
6.3 VDC AT +105 °C
10
10
MM
MM
MM
MM
W9
W9
W9
W9
A0
T58MM106M6R3C0500
T58MM106M6R3C0300
T58MM226M6R3C0500
T58MM226M6R3C0300
T58W9226M6R3C0500
T58W9476M6R3C0300
T58W9476M6R3C0200
T58W9476M6R3C0150
T58A0107M6R3C0150
T58A0107M6R3C0100
6.3
8
500
300
500
300
500
300
200
150
150
100
0.224
0.289
0.224
0.289
0.283
0.365
0.447
0.516
0.606
0.742
105
105
105
105
105
105
105
105
105
105
2000
2000
2000
2000
2000
1000
1000
1000
1000
1000
6.3
14
14
14
30
30
30
63
63
8
22
10
10
10
10
10
10
10
10
22
22
47
47
47
100
100
A0
8.2 VDC AT +105 °C
47
47
W0
W0
T58W0476M8R2C0500
T58W0476M8R2C0300
39
10
500
300
0.283
0.365
105
105
1000
1000
39
10
10 VDC AT +105 °C
14
47
A0 (1)
T58A0476M010C0175
47
175
0.561
105
1000
Notes
(1)
Rating in development: preliminary rating and electrical values. Contact factory for availability
Can be rated up to 38 V
(2)
Revision: 13-Apr-2021
Document Number: 40189
3
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T58
Vishay
www.vishay.com
STANDARD RATINGS
MAX. DF MAX. ESR
AT +25 °C AT +25 °C
HIGH TEMPERATURE LOAD
MAX. DCL
AT +25 °C
(μA)
MAX. RIPPLE,
100 kHz IRMS
(A)
CAPACITANCE CASE
PART NUMBER
TEMPERATURE
(°C)
TIME
(h)
(μF)
CODE
120 Hz
(%)
100 kHz
(mΩ)
16 VDC AT +105 °C
47
47
BB
BB
T58BB476M016C0200
T58BB476M016C0090
75
75
14
14
200
90
0.652
0.972
105
105
2000
2000
25 VDC AT +105 °C
4.7
22
22
W0
BB
BB
T58W0475M025C0500
T58BB226M025C0150
T58BB226M025C0100
23.5
55
10
14
14
500
150
100
0.283
0.753
0.850
105
105
105
1000
2000
2000
55
35 VDC AT +105 °C
3.5 (2)
1.0
W9
T58W9105M035C0500
8
500
0.283
105
2000
Notes
(1)
Rating in development: preliminary rating and electrical values. Contact factory for availability
Can be rated up to 38 V
(2)
RECOMMENDED TEMPERATURE DERATING
Axis Title
100
95
90
85
80
75
70
65
60
55
50
10000
Rated voltage
Recommended maximum
application voltage VR ≤ 10 V
1000
100
10
Recommended maximum
application voltage VR ≥ 16 V
-55
25
45
85
105
Temperature (°C)
RECOMMENDED VOLTAGE DERATING GUIDELINES
CAPACITOR VOLTAGE RATING
OPERATING VOLTAGE
6.3
8.2
10
16
25
35
5.7
7.4
9.0
12.8
20
28
Revision: 13-Apr-2021
Document Number: 40189
4
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T58
Vishay
www.vishay.com
CAPACITANCE VS. FREQUENCY
Axis Title
1000
10000
1000
100
220 μF - 10 V BB
100 μF - 6 V A0
100
10
1
22 μF - 6 V MM
10
10 000
0.01
0.1
1
10
100
1000
Frequency (kHz)
IMPEDANCE AND ESR VS. FREQUENCY
Axis Title
100
10000
1000
100
1. 22 μF - 6 V MM
2. 100 μF - 6 V A0
3. 220 μF - 10 V BB
ESR
Impedance
10
1
1
0.1
2
3
0.01
10
100 000
0.01
0.1
1
10
100
1000
10 000
Frequency (kHz)
POWER DISSIPATION
CASE CODE
MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR
MM
0.025
0.040
0.055
0.085
W9 / W0
A0
BB
STANDARD PACKAGING QUANTITY
CASE CODE
UNITS PER 7" REEL
MM
W0
W9
A0
4000
3000
4000
3000
2000
BB
Revision: 13-Apr-2021
Document Number: 40189
5
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T58
Vishay
www.vishay.com
PERFORMANCE CHARACTERISTICS
ITEM
CONDITION
POST TEST PERFORMANCE
Life test at +105 °C
2000 h application of rated voltage at 105 °C,
MIL-STD-202 method 108
Capacitance change Within 20 ꢀ of initial value
Dissipation factor
Leakage current
Within initial limits
Shall not exceed 300 ꢀ of initial limit
Humidity tests
At 60 °C / 90 ꢀ RH 500 h, no voltage applied
Capacitance change -20 ꢀ to +40 ꢀ of initial value
Dissipation factor
Leakage current
Within initial limit
Shall not exceed 300 ꢀ of initial limit
Stability at low and
high temperatures
-55 °C
25 °C
Capacitance change Within -20 ꢀ to 0 ꢀ of initial value
Dissipation factor
Leakage current
Shall not exceed 150 ꢀ of initial limit
n/a
Capacitance change Within 20 ꢀ of initial value
Dissipation factor
Leakage current
Within initial limit
Within initial limit
105 °C
Capacitance change Within -50 ꢀ to +30 ꢀ of initial value
Dissipation factor
Leakage current
Within initial limits
Shall not exceed 1000 ꢀ of initial limits
Surge voltage
85 °C, 1000 successive test cycles at 1.3 of
rated voltage in series with a 1 kΩ resistor at
the rate of 30 s ON, 30 s OFF
Capacitance change Within 20 ꢀ of initial value
Dissipation factor
Leakage current
Within initial limit
Shall not exceed 300 ꢀ of initial limit
Shock
(specified pulse)
MIL-STD-202, method 213, condition I,
100 g peak
Capacitance change Within 20 ꢀ of initial value
Dissipation factor
Leakage current
Within initial limit
Shall not exceed 300 ꢀ of initial limit
Vibration
MIL-STD-202, method 204, condition D,
10 Hz to 2000 Hz 20 g peak
There shall be no mechanical or visual damage to capacitors
post-conditioning.
Shear test
Apply a pressure load of 5 N for 10 s 1 s
horizontally to the center of capacitor side body
Capacitance change Within 20 ꢀ of initial value
Dissipation factor
Leakage current
Within initial limit
Shall not exceed 300 ꢀ of initial limit
PRODUCT INFORMATION
Polymer Guide
www.vishay.com/doc?40076
Moisture Sensitivity
Infographic
www.vishay.com/doc?40135
www.vishay.com/doc?48084
www.vishay.com/doc?48073
Sample Board
FAQ
Frequently Asked Questions
www.vishay.com/doc?42106
Revision: 13-Apr-2021
Document Number: 40189
6
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
Guide for Tantalum Solid Electrolyte Chip Capacitors
With Polymer Cathode
Rating for rating, tantalum capacitors tend to have as much
as three times better capacitance/volume efficiency than
aluminum electrolytic capacitors. An approximation of the
capacitance/volume efficiency of other types of capacitors
may be inferred from the following table, which shows the
dielectric constant ranges of the various materials used in
each type. Note that tantalum pentoxide has a dielectric
constant of 26, some three times greater than that of
aluminum oxide. This, in addition to the fact that extremely
thin films can be deposited during the electrolytic process
mentioned earlier, makes the tantalum capacitor extremely
efficient with respect to the number of microfarads available
per unit volume. The capacitance of any capacitor is
determined by the surface area of the two conducting
plates, the distance between the plates, and the dielectric
constant of the insulating material between the plates.
INTRODUCTION
Tantalum electrolytic capacitors are the preferred choice in
applications where volumetric efficiency, stable electrical
parameters, high reliability, and long service life are primary
considerations. The stability and resistance to elevated
temperatures of the tantalum/tantalum oxide/manganese
dioxide system make solid tantalum capacitors an
appropriate choice for today's surface mount assembly
technology.
Vishay Sprague has been a pioneer and leader in this field,
producing a large variety of tantalum capacitor types for
consumer, industrial, automotive, military, and aerospace
electronic applications.
Tantalum is not found in its pure state. Rather, it is
commonly found in a number of oxide minerals, often in
combination with Columbium ore. This combination is
known as “tantalite” when its contents are more than
one-half tantalum. Important sources of tantalite include
Australia, Brazil, Canada, China, and several African
countries. Synthetic tantalite concentrates produced from
tin slags in Thailand, Malaysia, and Brazil are also a
significant raw material for tantalum production.
Electronic applications, and particularly capacitors,
consume the largest share of world tantalum production.
Other important applications for tantalum include cutting
tools (tantalum carbide), high temperature super alloys,
chemical processing equipment, medical implants, and
military ordnance.
COMPARISON OF CAPACITOR
DIELECTRIC CONSTANTS
e
DIELECTRIC
DIELECTRIC CONSTANT
Air or vacuum
Paper
1.0
2.0 to 6.0
2.1 to 6.0
2.2 to 2.3
2.7 to 2.8
3.8 to 4.4
4.8 to 8.0
5.1 to 5.9
5.4 to 8.7
8.4
Plastic
Mineral oil
Silicone oil
Quartz
Glass
Vishay Sprague is a major user of tantalum materials in the
form of powder and wire for capacitor elements and rod and
sheet for high temperature vacuum processing.
Porcelain
Mica
Aluminum oxide
Tantalum pentoxide
Ceramic
THE BASICS OF TANTALUM CAPACITORS
26
Most metals form crystalline oxides which are
non-protecting, such as rust on iron or black oxide on
copper. A few metals form dense, stable, tightly adhering,
electrically insulating oxides. These are the so-called
“valve”metals and include titanium, zirconium, niobium,
tantalum, hafnium, and aluminum. Only a few of these
permit the accurate control of oxide thickness by
electrochemical means. Of these, the most valuable for the
electronics industry are aluminum and tantalum.
Capacitors are basic to all kinds of electrical equipment,
from radios and television sets to missile controls and
automobile ignitions. Their function is to store an electrical
charge for later use.
12 to 400K
In the tantalum electrolytic capacitor, the distance between
the plates is very small since it is only the thickness of the
tantalum pentoxide film. As the dielectric constant of the
tantalum pentoxide is high, the capacitance of a tantalum
capacitor is high if the area of the plates is large:
eA
t
------
C =
where
C = capacitance
Capacitors consist of two conducting surfaces, usually
metal plates, whose function is to conduct electricity. They
are separated by an insulating material or dielectric. The
dielectric used in all tantalum electrolytic capacitors is
tantalum pentoxide.
Tantalum pentoxide compound possesses high-dielectric
strength and a high-dielectric constant. As capacitors are
being manufactured, a film of tantalum pentoxide is applied
to their electrodes by means of an electrolytic process. The
film is applied in various thicknesses and at various voltages
and although transparent to begin with, it takes on different
colors as light refracts through it. This coloring occurs on the
tantalum electrodes of all types of tantalum capacitors.
e = dielectric constant
A = surface area of the dielectric
t = thickness of the dielectric
Tantalum capacitors contain either liquid or solid
electrolytes. In solid electrolyte capacitors, a dry material
(manganese dioxide) forms the cathode plate. A tantalum
lead is embedded in or welded to the pellet, which is in turn
connected to a termination or lead wire. The drawings show
the construction details of the surface mount types of
tantalum capacitors shown in this catalog.
Revision: 13-Apr-2021
Document Number: 40076
1
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
SOLID ELECTROLYTE POLYMER TANTALUM CAPACITORS
Solid electrolyte polymer capacitors utilize sintered tantalum pellets as anodes. Tantalum pentoxide dielectric layer is formed
on the entire surface of anode, which is further impregnated with highly conductive polymer as cathode system.
The conductive polymer layer is then coated with graphite, followed by a layer of metallic silver, which provides a conductive
surface between the capacitor element and the outer termination (lead frame or other).
Molded chip polymer tantalum capacitor encases the element in plastic resins, such as epoxy materials. The molding
compound has been selected to meet the requirements of UL 94 V-0 and outgassing requirements of ASTM E-595. After
assembly, the capacitors are tested and inspected to assure long life and reliability. It offers excellent reliability and high stability
for variety of applications in electronic devices. Usage of conductive polymer cathode system provides very low equivalent
series resistance (ESR), which makes the capacitors particularly suitable for high frequency applications.
TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T50 / T55 / T56
Epoxy encapsulation
Silver adhesive
Anode polarity bar
Solderable cathode termination
Polymer / carbon / silver coating
Solderable anode termination
Sintered tantalum pellet
Lead frame welded to Ta wire
TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T58
Rating / marking
Encapsulation
Side cathode termination (-)
Anode polarity bar
Silver adhesive epoxy
Bottom cathode termination (-)
Copper pad
Side anode termination (+)
Glass reinforced epoxy resin substrate
Polymer / carbon / silver coating
Conductive strip
Sintered tantalum pellet
Anode wire
Bottom anode termination (+)
Revision: 13-Apr-2021
Document Number: 40076
2
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T52
T52 E5 case
Encapsulation
Side cathode termination (-)
Silver adhesive epoxy
Polarity bar
marking
Bottom cathode
termination (-)
Side anode termination (+)
Sintered
Silver plated copper substrate
tantalum pellet
Conductive strip
Polymer / carbon / silver coating
Bottom anode
termination (+)
T52 M1 case
Encapsulation
Polarity bar marking
Side cathode termination (-)
Silver adhesive epoxy
Bottom cathode termination (-)
Silver plated
Side anode termination (+)
copper substrate
Sintered
tantalum pellet
Polymer / carbon / silver coating
Bottom anode termination (+)
TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T54 / T59 / 20021
Top / bottom cathode termination (-)
Encapsulation
Anode polarity marking
Side cathode termination (-)
Silver plated copper substrate
Top / bottom anode termination (+)
Silver adhesive epoxy
Conductive strip
Sintered tantalum pellet
Side anode termination (+)
Top / bottom cathode termination (-)
Polymer / carbon / silver coating
Top / bottom anode termination (+)
Revision: 13-Apr-2021
Document Number: 40076
3
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
POLYMER CAPACITORS - MOLDED CASE
SERIES
T50, T55, T56
PRODUCT IMAGE
TYPE
VPolyTanTM, molded case, high performance polymer
FEATURES
High performance
-55 °C to +105 °C / +125 °C
3.3 μF to 1000 μF
2.5 V to 63 V
TEMPERATURE RANGE
CAPACITANCE RANGE
VOLTAGE RANGE
CAPACITANCE TOLERANCE
LEAKAGE CURRENT
DISSIPATION FACTOR
ESR
20 ꢀ
0.1 CV
8 ꢀ to 10 ꢀ
6 mΩ to 500 mΩ
J, P, A, T, B, Z, V, D, C
CASE SIZES
Cases J, P, C: 100 ꢀ tin
Case A, T, B, Z, V, D: Ni / Pd / Au
TERMINATION FINISH
POLYMER CAPACITORS - LEADFRAMELESS MOLDED CASE
SERIES
T52
T58
T59
T54
20021
PRODUCT
IMAGE
vPolyTanTM polymer
surface mount chip
capacitors, low ESR,
leadframeless
molded type,
hi-rel commercial
off-the-shelf (COTS)
vPolyTanTM polymer
surface mount
chip capacitors,
low profile,
vPolyTanTM polymer
surface mount
chip capacitors,
low ESR,
vPolyTanTM polymer
surface mount chip
capacitors, low ESR,
leadframeless
vPolyTanTM polymer
surface mount chip
capacitors, compact,
leadframeless
TYPE
leadframeless
molded type
leadframeless
molded type
molded type,
DLA approved
molded type
Hi-rel COTS,
multianode
FEATURES
Low profile
Small case size
Multianode
Multianode
TEMPERATURE
RANGE
-55 °C to +105 °C
-55 °C to +105 °C
-55 °C to +105 °C
-55 °C to +125 °C
-55 °C to +125 °C
15 ꢁF to 470 ꢁF
(discrete capacitors)
CAPACITANCE
RANGE
47 ꢁF to 1500 ꢁF
1 ꢁF to 330 ꢁF
15 ꢁF to 470 ꢁF
15 ꢁF to 470 ꢁF
30 ꢁF to 2800 ꢁF
(stacked capacitors)
VOLTAGE
RANGE
CAPACITANCE
TOLERANCE
LEAKAGE
CURRENT
10 V to 35 V
20 ꢀ
6.3 V to 35 V
20 ꢀ
16 V to 75 V
10 ꢀ, 20 ꢀ
0.1 CV
16 V to 75 V
20 ꢀ
16 V to 63 V
20 ꢀ
DISSIPATION
FACTOR
10 ꢀ
8 ꢀ to 14 ꢀ
12 ꢀ
12 ꢀ
10 ꢀ
ESR
CASE SIZES
TERMINATION
25 mΩ to 55 mΩ
E5, M1, M9, B2
50 mΩ to 500 mΩ
MM, W0, W9, A0, BB
25 mΩ to 150 mΩ
5 mΩ to 150 mΩ
EE, E2, E3, E4, E6
25 mΩ to 150 mΩ
EE
EE
100 ꢀ tin
100 ꢀ tin; tin / lead
Tin / lead
Revision: 13-Apr-2021
Document Number: 40076
4
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
MOLDED CAPACITORS, T50 / T55 / T56 TYPES
PLASTIC TAPE AND REEL PACKAGING DIMENSIONS in millimeters
Label
E
D
W
TAPE WIDTH
A + 0 / - 3
B + 1 / 0
8
12
Ø 180
Ø 60
Ø 13
Ø 21
2.0
C
D
E
0.2
0.5
0.5
0.3
W
9.0
13.0
Note
A reel diameter of 330 mm is also applicable
•
PLASTIC TAPE SIZE DIMENSIONS in millimeters
Perforation
Pocket
Ø 1.5+ 0.1
0
A
P1
t
4.0 0.1
2.0 0.1
Inserting direction
Direction of tape flow
Perforation
Marking side (upper)
Mounting terminal side (lower)
Symbol: R
CASE CODE
A
0ꢀ2
1.0
B
0ꢀ2
1.8
W
0ꢀ3
8.0
8.0
8.0
8.0
8.0
F
0ꢀ1
3.5
E
1.75
0ꢀ1
P1 0ꢀ1
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
tmaxꢀ
1.3
1.6
2.5
1.7
2.5
3.1
2.6
2.6
3.4
J
P
A
T
B
C
Z
V
D
1.4
1.9
3.1
3.1
3.7
4.8
4.8
4.8
2.2
3.5
3.8
3.8
6.3
7.7
7.7
7.7
3.5
3.5
3.5
3.5
5.5
5.5
5.5
5.5
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
12.0
12.0
12.0
12.0
8.0
Note
A reel diameter of 330 mm is also applicable
•
Revision: 13-Apr-2021
Document Number: 40076
5
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
LEADFRAMELESS MOLDED CAPACITORS, ALL TYPES
PLASTIC TAPE AND REEL PACKAGING in inches [millimeters]
0.157 0.004
[4.0 0.10]
10 pitches cumulative
tolerance on tape
0.00ꢀ [0.ꢁ00]
Tape thickness
Deformation
between
embossments
0.059 + 0.004 - 0.0
[1.5 + 0.10 - 0.0]
Embossment
0.014
[0.35]
max.
0.079 0.00ꢁ
[ꢁ.0 0.05]
0.069 0.004
[1.75 0.10]
Top
cover
tape
A0
0.030 [0.75]
min. (3)
ꢁ0°
F
W
B1 (max.) (6)
K0
Maximum
component
rotation
B0
P1
0.030 [0.75]
min. (4)
Top cover
tape
(Side or front sectional view)
Center lines
of cavity
0.004 [0.10]
max.
For tape feeder
reference only
including draft.
D1 (min.) for components
(5)
.
0.079 x 0.047 [ꢁ.0 x 1.ꢁ] and larger
USER DIRECTION
Maximum
(5)
OF FEED
cavity size (1)
Concentric around B0
Cathode (-)
Anode (+)
DIRECTION OF FEED
3.937 [100.0]
0.039 [1.0]
ꢁ0° maximum
component rotation
max.
Typical
component
cavity
center line
Tape
0.039 [1.0]
max.
Tape and Reel Specifications: all case sizes are
available on plastic embossed tape per EIA-481.
Standard reel diameter is 7" [178 mm].
B0
0.9ꢀ43 [ꢁ50.0]
Typical
Camber
component
center line
(Top view)
A0
Allowable camber to be 0.039/3.937 [1/100]
Non-cumulative over 9.ꢀ43 [ꢁ50.0]
(Top view)
Notes
•
(1)
Metric dimensions will govern. Dimensions in inches are rounded and for reference only
A0, B0, K0, are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent
rotation of the component within the cavity of not more than 20°
(2)
(3)
(4)
(5)
(6)
Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide
“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum
This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed
cavities or to the edge of the cavity whichever is less
This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier
tape between the embossed cavity or to the edge of the cavity whichever is less
The embossed hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location shall be applied independent of each other
B1 dimension is a reference dimension tape feeder clearance only
Revision: 13-Apr-2021
Document Number: 40076
6
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
CARRIER TAPE DIMENSIONS in inches [millimeters]
CASE CODE
TAPE SIZE
B1 (MAXꢀ) (1)
0.329 [8.35]
0.075 [1.91]
D1 (MINꢀ)
0.059 [1.5]
0.02 [0.5]
F
K0 (MAXꢀ)
0.071 [1.8]
0.043 [1.10]
P1
W
0.217 0.002
[5.50 0.05]
0.315 0.004
[8.0 0.10]
0.476 0.008
[12.1 0.20]
E5
12 mm
MM (2)
8 mm
0.138 [3.5]
0.157 [4.0]
0.315 [8.0]
0.217 0.002
[5.5 0.05]
0.315 0.04
[8.0 1.0]
0.472 + 0.012 / - 0.004
[12.0 + 0.3 / - 0.10]
M1, M9
12 mm
0.32 [8.2]
0.059 [1.5]
0.094 [2.39]
W9
W0
A0
8 mm
8 mm
8 mm
8 mm
0.126 [3.20]
0.126 [3.20]
-
0.030 [0.75]
0.030 [0.75]
0.02 [0.5]
0.138 [3.5]
0.138 [3.5]
0.138 [3.5]
0.138 [3.5]
0.045 [1.15]
0.045 [1.15]
0.049 [1.25]
0.087 [2.22]
0.157 [4.0]
0.157 [4.0]
0.157 [4.0]
0.157 [4.0]
0.315 [8.0]
0.315 [8.0]
0.315 [8.0]
0.315 [8.0]
BB
0.157 [4.0]
0.039 [1.0]
0.217 0.002
[5.5 0.05]
0.315 0.04
[8.0 1.0]
0.472 + 0.012 / - 0.004
[12.0 + 0.3 / - 0.10]
EE
B2
12 mm
8 mm
0.32 [8.2]
0.059 [1.5]
0.039 [1.0]
0.175 [4.44]
0.057 [1.45]
0.157 [4.0]
0.138 [3.5]
0.157 [4.0]
0.315 [8.0]
Notes
(1)
For reference only
Standard packaging of MM case is with paper tape. Plastic tape is available per request
(2)
PAPER TAPE AND REEL PACKAGING DIMENSIONS in inches [millimeters]
[10 pitches cumulative tolerance on tape 0.ꢁ mm]
E1
Pꢁ
T
Ø D0
P0
A0
F
Bottom cover
tape
W
B0
Eꢁ
Top
cover tape
Anode
Cavity size (1)
P1
Bottom cover tape
G
Cavity center lines
USER FEED DIRECTION
CASE TAPE
SIZE SIZE
A0
B0
D0
P0
P1
P2
E
F
W
T
0.041 0.002 0.071 0.002 0.06 0.004 0.157 0.004 0.157 0.004 0.079 0.002 0.069 0.004 0.0138 0.002 0.315 0.008 0.037 0.002
MM 8 mm
[1.05 0.05] [1.8 0.05] [1.5 0.1]
[4.0 0.1]
[4.0 0.1]
[2.0 0.05]
[1.75 0.1]
[3.5 0.05]
[8.0 0.2] [0.95 0.05]
0.049 0.002 0.081 0.002 0.06 0.004 0.157 0.004 0.157 0.004 0.079 0.002 0.069 0.004 0.0138 0.002 0.315 0.008 0.041 0.002
M0 8 mm
[1.25 0.05] [2.05 0.05] [1.5 0.1]
[4.0 0.1]
[4.0 0.1]
[2.0 0.05]
[1.75 0.1]
[3.5 0.05]
[8.0 0.2] [1.05 0.05]
Note
(1)
A0, B0 are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent rotation
of the component within the cavity of not more than 20°
Revision: 13-Apr-2021
Document Number: 40076
7
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
PACKING AND STORAGE
Polymer capacitors meet moisture sensitivity level rating (MSL) of 3 or 4 as specified in IPC/JEDEC® J-STD-020 and are dry
packaged in moisture barrier bags (MBB) per J-STD-033. MSL for each particular family is defined in the datasheet - either in
“Features” section or “Standard Ratings” table. Level 3 specifies a floor life (out of bag) of 168 hours and level 4 specifies a floor
life of 72 hours at 30 °C maximum and 60 ꢀ relative humidity (RH). Unused capacitors should be re-sealed in the MBB with
fresh desiccant. A moisture strip (humidity indicator card) is included in the bag to assure dryness. To remove excess moisture,
capacitors can be dried at 40 °C (standard “dry box” conditions).
For detailed recommendations please refer to J-STD-033.
RECOMMENDED REFLOW PROFILES
Vishay recommends no more than 3 cycles of reflow in accordance with J-STD-020.
TP
tp
Max. ramp up rate = 3 °C/s
Max. ramp down rate = 6 °C/s
TL
tL
TSmax.
Preheat area
TSmin.
tS
25
Time 25 °C to peak
Time
PROFILE FEATURE
SnPb EUTECTIC ASSEMBLY
LEAD (Pb)-FREE ASSEMBLY
PREHEAT AND SOAK
Temperature min. (TSmin.
)
100 °C
150 °C
150 °C
200 °C
Temperature max. (TSmax.
)
Time (tS) from (TSmin. to TSmax.
)
60 s to 120 s
60 s to 120 s
RAMP UP
Ramp-up rate (TL to Tp)
Liquidus temperature (TL)
Time (tL) maintained above TL
3 °C/s maximum
183 °C
217 °C
60 s to 150 s
Depends on type and case - see table below
Peak package body temperature (Tp) max.
Time (tp) within 5 °C of the peak max. temperature
RAMP DOWN
20 s
5 s
Ramp-down rate (Tp to TL)
6 °C/s maximum
Time from 25 °C to peak temperature
6 min maximum
8 min maximum
PEAK PACKAGE BODY TEMPERATURE (Tp) MAXIMUM
PEAK PACKAGE BODY TEMPERATURE (TP) MAXꢀ
TYPE
CASE CODE
SnPb EUTECTIC ASSEMBLY LEAD (Pb)-FREE ASSEMBLY
T55
T52
J, P, A, T, B, C, Z, V, D
260 °C
260 °C
260 °C
260 °C
250 °C
250 °C
250 °C
n/a
E5, M1, M9, B2
T58
MM, M0, W9, W0, A0, BB
n/a
T50
D
T56
D
T59
EE
EE, E2, E3, E4, E6
EE
220 °C
220 °C
220 °C
T54
20021
Notes
•
T50, T52, T55, T56, and T58 capacitors are process sensitive.
PSL classification to JEDEC J-STD-075: R4G
•
T54 and T59 capacitors with 100 ꢀ tin termination are process sensitive.
PSL classification to JEDEC J-STD-075: R6G
Revision: 13-Apr-2021
Document Number: 40076
8
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
MOLDED CAPACITORS, T50 / T55 / T56 TYPES
PAD DIMENSIONS in millimeters
L
X
W
Capacitor
Pattern
Y
G
Z
CAPACITOR SIZE
PAD DIMENSIONS
CASE /
DIMENSIONS
L
W
0.8
1.25
1.6
2.8
3.2
4.3
G (maxꢀ)
0.7
Z (minꢀ)
2.5
X (minꢀ)
Y (Refꢀ)
0.9
J
1.6
2.0
3.2
3.5
5.8
7.3
1.0
1.2
1.5
2.7
2.7
2.9
P
A
0.5
2.6
1.05
1.35
1.35
2.0
1.1
3.8
T / B
C
1.4
4.1
2.9
6.9
Z / V / D
4.1
8.2
2.05
LEADFRAMELESS MOLDED CAPACITORS T52 / T58
PAD DIMENSIONS in inches [millimeters]
D
B
C
Pads
A
Capacitor body
C (NOMꢀ)
FAMILY
CASE CODE
A (NOMꢀ)
0.094 [2.40]
0.178 [4.52]
0.081 [2.06]
0.024 [0.61]
0.035 [0.89]
0.047 [1.19]
0.094 [2.39]
B (MINꢀ)
D (MINꢀ)
E5
M1, M9
B2
0.077 [1.95]
0.098 [2.48]
0.057 [1.44]
0.027 [0.70]
0.029 [0.74]
0.042 [1.06]
0.044 [1.11]
0.180 [4.57]
0.138 [3.50]
0.070 [1.77]
0.025 [0.64]
0.041 [1.05]
0.065 [1.65]
0.072 [1.82]
0.333 [8.46]
0.333 [8.46]
0.183 [4.64]
0.080 [2.03]
0.099 [2.52]
0.148 [3.76]
0.159 [4.03]
T52
MM
W0, W9
A0
T58
BB
LEADFRAMELESS MOLDED CAPACITORS T59 / T54 / 20021
PAD DIMENSIONS in inches [millimeters]
D
B
C
Pads
A
Capacitor body
FAMILY
T59 / T54
T54
CASE CODE
EE
A (NOMꢀ)
0.209 [5.30]
0.128 [3.24]
0.301 [7.64]
0.209 [5.30]
B (MINꢀ)
C (NOMꢀ)
D (MINꢀ)
0.098 [2.50]
0.120 [3.04]
0.120 [3.04]
0.098 [2.50]
0.169 [4.30]
0.154 [3.92]
0.154 [3.92]
0.169 [4.30]
0.366 [9.30]
0.394 [10.0]
0.394 [10.0]
0.366 [9.30]
E2 / E3
E4 / E6
EE
T54
20021
Revision: 13-Apr-2021
Document Number: 40076
9
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
GUIDE TO APPLICATION
1.
AC Ripple Current: the maximum allowable ripple
4.
Reverse Voltage: the capacitors are not intended for
use with reverse voltage applied. However, they are
capable of withstanding momentary reverse voltage
peaks, which must not exceed the following values:
At 25 °C: 10 ꢀ of the rated voltage or 1 V, whichever
is smaller.
current shall be determined from the formula:
P
IRMS
=
------------
RESR
At 85 °C: 5 ꢀ of the rated voltage or 0.5 V, whichever
is smaller.
At 105 °C: 3 ꢀ of the rated voltage or 0.3 V,
whichever is smaller.
where,
P =
power dissipation in W at +45 °C as given in
the tables in the product datasheets.
RESR = the capacitor equivalent series resistance at
the specified frequency.
5.
Mounting Precautions:
5.1
Soldering: capacitors can be attached by
conventional soldering techniques; vapor phase,
convection reflow, infrared reflow, wave soldering,
and hot plate methods. The soldering profile charts
show recommended time / temperature conditions
for soldering. Preheating is recommended. The
recommended maximum ramp rate is 2 °C per s.
2.
AC Ripple Voltage: the maximum allowable ripple
voltage shall be determined from the formula:
P
VRMS = Z ------------
RESR
or, from the formula:
Attachment with
a
soldering iron is not
recommended due to the difficulty of controlling
temperature and time at temperature. The soldering
iron must never come in contact with the capacitor.
For details see www.vishay.com/doc?40214.
VRMS = IRMS x Z
where,
P =
power dissipation in W at +45 °C as given in
the tables in the product datasheets.
5.2
Limit Pressure on Capacitor Installation with
Mounter: pressure must not exceed 4.9 N with a tool
end diameter of 1.5 mm when applied to the
capacitors using an absorber, centering tweezers, or
similar (maximum permitted pressurization time: 5 s).
An excessively low absorber setting position would
result in not only the application of undue force to the
capacitors but capacitor and other component
scattering, circuit board wiring breakage, and / or
cracking as well, particularly when the capacitors are
mounted together with other chips having a height of
1 mm or less.
RESR = The capacitor equivalent series resistance at
the specified frequency.
Z =
The capacitor impedance at the specified
frequency.
2.1
The tantalum capacitors must be used in such a
condition that the sum of the working voltage and
ripple voltage peak values does not exceed the rated
voltage as shown in figure below.
5.3
Flux Selection
Ripple voltage
Rated voltage
5.3.1 Select a flux that contains a minimum of chlorine and
amine.
5.3.2 After flux use, the chlorine and amine in the flux
remain must be removed.
Operating
voltage
Working voltage
5.4
Cleaning After Mounting: the following solvents are
usable when cleaning the capacitors after mounting.
Never use a highly active solvent.
• Halogen organic solvent (HCFC225, etc.)
• Alcoholic solvent (IPA, ethanol, etc.)
Time (s)
• Petroleum solvent, alkali saponifying agent, water,
3.
Temperature Derating: power dissipation is
affected by the heat sinking capability of the
mounting surface. If these capacitors are to
be operated at temperatures above +45 °C, the
permissible ripple current (or voltage) shall be
calculated using the derating coefficient as shown in
the table below:
etc.
Circuit board cleaning must be conducted at a
temperature of not higher than 50 °C and for an
immersion time of not longer than 30 minutes. When
an ultrasonic cleaning method is used, cleaning must
be conducted at a frequency of 48 kHz or lower, at
an vibrator output of 0.02 W/cm3, at a temperature of
not higher than 40 °C, and for a time of 5 minutes or
shorter.
MAXIMUM RIPPLE CURRENT TEMPERATURE
DERATING FACTOR
Notes
≤ 45 °C
55 °C
1.0
0.8
• Care must be exercised in cleaning process so that the
mounted capacitor will not come into contact with any
cleaned object or the like or will not get rubbed by a stiff
brush or similar. If such precautions are not taken
particularly when the ultrasonic cleaning method is
employed, terminal breakage may occur
• When performing ultrasonic cleaning under conditions
other than stated above, conduct adequate advance
checkout
85 °C
0.6
105 °C
125 °C
0.4
0.25
Revision: 13-Apr-2021
Document Number: 40076
10
For technical questions, contact: polytech@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
T590N12TOF
Silicon Controlled Rectifier, 1330A I(T)RMS, 590000mA I(T), 1200V V(DRM), 1200V V(RRM), 1 Element
INFINEON
T590N12TOFXPSA1
Silicon Controlled Rectifier, 1330A I(T)RMS, 1200V V(DRM), 1200V V(RRM), 1 Element,
INFINEON
T590N14TOF
Silicon Controlled Rectifier, 1330A I(T)RMS, 590000mA I(T), 1400V V(DRM), 1400V V(RRM), 1 Element
INFINEON
T590N14TOFXPSA1
Silicon Controlled Rectifier, 1330A I(T)RMS, 1400V V(DRM), 1400V V(RRM), 1 Element,
INFINEON
©2020 ICPDF网 联系我们和版权申明