T95R227K016HSSL_技术文档

T95

Vishay Sprague

www.vishay.com

Solid Tantalum Chip Capacitors,

TANTAMOUNT™, Hi-Rel COTS, Conformal Coated

FEATURES

• High reliability; Weibull grading available

• Surge current testing per MIL-PRF-55365

options available

Available

• Standard and low ESR options

• Terminations: SnPb, standard,

100 ꢀ tin available

Available

• All cases except R case are halogen-free

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

PERFORMANCE / ELECTRICAL

CHARACTERISTICS

www.vishay.com/doc?40209

Note

Operating Temperature: -55 °C to +125 °C

*

This datasheet provides information about parts that are

RoHS-compliant and / or parts that are non RoHS-compliant. For

example, parts with lead (Pb) terminations are not RoHS-compliant.

Please see the information / tables in this datasheet for details



(above 85 °C, voltage derating is required)



Capacitance Range: 0.15 μF to 680 μF

Capacitance Tolerance: 20 ꢀ, 10 ꢀ standard

Voltage Rating: 4 V_DCto 50 V_DC



Moisture Sensitivity Level 2a

ORDERING INFORMATION

T95

D

107

K

010

E

A

S

TYPE CASE CAPACITANCE CAPACITANCE

DC VOLTAGE

TERMINATION AND

PACKAGING

RELIABILITY

LEVEL

SURGE

CURRENT

ESR

CODE

TOLERANCE RATING AT +85 °C

See

Ratings

and

This is

K = 10 %

20 ꢀ

This is expressed

in volts. To

Sn / Pb solder

E = 7" (178 mm)

reels

A = 1.0 % Weibull

B = 0.1 ꢀ Weibull ⁽¹⁾

A = 10 cycles S = std.

expressed

M

=



at +25 °C

B = 10 cycles

at -55 °C /

+85 °C

L = low

in picofarads.

The first two

complete the

three-digit block,

zeros precede

the voltage rating.

A decimal point

is indicated by

an “R”

C = 0.01 ꢀ Weibull ⁽¹⁾

S = hi-rel standard

burn-in



L = 7" (178 mm)

½ reel

Case

Codes digits are the

table.

significant

figures. The

third is the

number of

zeros to

Z = non-established

reliability

S = 3 cycles

100 % tin

C = 7" (178 mm)

reels

at +25 °C

H = 7" (178 mm)

½ reel

(6R3 = 6.3 V).

follow.

Notes

(1)

Weibull 0.1 ꢀ and 0.01 ꢀ may not be available on all ratings. See detailed notes in ratings table or contact marketing for availability

We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size

Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting

•

DIMENSIONS in inches [millimeters]

Tantalum wire

nib identiﬁes

anode (+)

terminal

W

L

MAX.

B

D

REF.

J

MAX.

A

H

CASE CODE

L (MAX.)

W

H

A

B

D (REF.)

J (MAX.)

0.143

[3.63]

0.143

[3.63]

0.146

[3.7]

0.158

[4.0]

0.072 0.008

[1.83 0.20]

0.104 0.010

[2.65 0.25]

0.072 0.012

[1.8 0.3]

0.048 0.008

[1.22 0.20]

0.051 0.010

[1.30 0.25]

0.056 0.012

[1.4 0.3]

0.023 0.010 0.085 0.015

[0.58 0.25] [2.16 0.37]

0.023 0.010 0.085 0.015

[0.58 0.25] [2.16 0.37]

0.031 0.012 0.085 0.016

[0.8 0.3] [2.2 0.40]

0.115

[2.9]

0.115

[2.9]

0.115

[2.9]

0.138

[3.5]

0.004

[0.10]

0.004

[0.10]

0.004

[0.10]

0.004

[0.10]

S

V

A

B

0.110 + 0.012 / - 0.016 0.075 + 0.012 / - 0.024 0.031 0.012 0.097 0.016

[2.8 + 0.3 / - 0.4]

[1.9 + 0.3 / - 0.6]

[0.8 0.3]

[2.5 0.40]

Revision: 13-Feb-2020

Document Number: 40081

1

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T95

Vishay Sprague

www.vishay.com

DIMENSIONS in inches [millimeters]

CASE CODE

L (MAX.)

W

H

A

B

D (REF.)

J (MAX.)

0.285

[7.24]

0.104 0.010

[2.65 0.25]

0.051 0.010

[1.30 0.25]

0.040 0.020 0.200 0.027

[1.00 0.50] [5.08 0.69]

0.243

[6.2]

0.004

[0.10]

X

0.285

[7.24]

0.104 0.010

[2.65 0.25]

0.069 0.010

[1.75 0.25]

0.040 0.020 0.200 0.027

[1.00 0.50] [5.08 0.69]

0.243

[6.2]

0.004

[0.10]

Y

Z

0.285

[7.24]

0.104 0.010

[2.65 0.25]

0.104 0.010

[2.65 0.25]

0.040 0.020 0.200 0.027

[1.00 0.50] [5.08 0.69]

0.243

[6.2]

0.004

[0.10]

0.281

[7.1]

0.126 0.012

[3.2 0.3]

0.098 0.012

[2.5 0.3]

0.051 0.012 0.180 0.024

[1.3 0.3] [4.6 0.60]

0.236

[6.0]

0.004

[0.10]

C

D

R

0.293

[7.4]

0.170 + 0.012 / - 0.024

[4.3 + 0.3 / - 0.6]

0.110 0.012

[2.8 0.3]

0.051 0.012 0.180 0.024

[1.3 0.3] [4.6 0.60]

0.253

[6.4]

0.004

[0.10]

0.283

[7.20]

0.235 + 0.012 / - 0.024 0.136 + 0.012 / - 0.016 0.051 0.012 0.180 0.024

[6.0 + 0.30 / - 0.60]

0.243

[6.2]

0.004

[0.10]

[3.50 + 0.30 / - 0.40]

[1.30 0.30]

[4.60 0.60]

Note

•

The anode termination (D less B) will be a minimum of 0.010" (0.25 mm)

RATINGS AND CASE CODES

μF

0.15

0.22

0.33

0.47

0.68

1.0

4 V

6.3 V

10 V

16 V

20 V

25 V

35 V

S

50 V

S

V

S

1.5

S

V

X

Y

Z

V

2.2

S

X

3.3

S

4.7

S

V

X

V

X

Y

Z / C

C / D

R

6.8

S

V

X

Y

Z

V

A / X

X

Z

10

X

C / Y

Z

15

B / X

Y

B / Y

B / Z

Z

C / D / R

R

22

R

33

Z

D / R

R

47

Y

Z

R

68

R

100

120

150

180

220

270

330

390

470

680

R

C / D

R

D / R

D

R

D / R

D

R

C

R

D

R

Revision: 13-Feb-2020

Document Number: 40081

2

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T95

Vishay Sprague

www.vishay.com

STANDARD RATINGS

STD. (S)

LOW (L)

MAX. DF

AT +25 °C

120 Hz

(%)

MAX. DCL

AT +25 °C

(μA)

MAX. ESR MAX. ESR

AVAILABLE

CAPACITANCE

(μF)

CASE CODE

PART NUMBER

AT +25 °C AT +25 °C RELIABILITY

100 kHz

()

100 kHz

()

LEVELS

4 V_DCAT +85 °C; 2.7 V_DCAT +125 °C

6.8

10

S

V

X

Y

Z

D

R

T95S685(1)004(2)(3)(4)(5)

0.5

6

8

4.000

3.000

2.000

1.200

0.800

0.130

2.000

1.500

1.000

0.600

0.400

0.060

0.080

A, S, Z

T95S106(1)004(2)(3)(4)(5)

T95V156(1)004(2)(3)(4)(5)

T95X226(1)004(2)(3)(4)(5)

T95X336(1)004(2)(3)(4)(5)

T95Y476(1)004(2)(3)(4)(5)

T95Y686(1)004(2)(3)(4)(5)

T95Z107(1)004(2)(3)(4)(5)

T95D277(1)004(2)(3)(4)(5)

T95R337(1)004(2)(3)(4)(5)

15

0.6

22

0.9

33

1.3

47

1.9

68

2.7

100

270

330

4.0

10.8

13.2

6.3 V_DCAT +85 °C; 4 V_DCAT +125 °C

4.7

6.8

10

S

V

X

Y

Z

R

D

R

C

R

D

R

T95S475(1)6R3(2)(3)(4)(5)

0.5

6

4.000

3.000

2.000

1.200

0.800

0.130

0.140

0.130

0.170

0.130

0.090

2.000

1.500

1.000

0.600

0.400

0.080

0.065

0.080

0.045

0.060

0.045

A, S, Z

T95S685(1)6R3(2)(3)(4)(5)

T95V106(1)6R3(2)(3)(4)(5)

T95X156(1)6R3(2)(3)(4)(5)

T95X226(1)6R3(2)(3)(4)(5)

T95Y476(1)6R3(2)(3)(4)(5)

T95Z107(1)6R3(2)(3)(4)(5)

T95R187(1)6R3(2)(3)(4)(5)

T95D227(1)6R3(2)(6)(4)(5)

T95R227(1)6R3(2)(3)(4)(5)

T95C337(1)6R3(2)(7)(4)(5)

T95R397(1)6R3(2)(3)(4)(5)

T95D477(1)6R3(2)(3)(4)(5)

T95R687(1)6R3(2)(3)(4)(5)

0.6

6

A, S, Z

15

0.9

6

A, S, Z

22

1.4

6

A, S, Z

47

2.8

6

A, S, Z

100

180

220

330

390

470

680

6.0

6

A, S, Z

10.8

13.9

13.2

20.8

23.4

28.2

40.8

8

A, S, Z

8

A, B, S, Z

A, S, Z

8

A, B, C, S, Z

A, S, Z

8

10

12

A, S, Z

10 V_DCAT +85 °C; 7 V_DCAT +125 °C

3.3

4.7

6.8

10

S

V

X

B

X

Y

Z

R

D

R

T95S335(1)010(2)(3)(4)(5)

0.5

6

8

5.000

4.000

3.000

0.750

2.000

1.200

0.800

0.140

2.500

2.000

1.500

0.550

1.000

0.600

0.400

0.075

0.085

0.070

A, S, Z

T95S475(1)010(2)(3)(4)(5)

T95V685(1)010(2)(3)(4)(5)

T95X106(1)010(2)(3)(4)(5)

T95B156(1)010(2)(6)(4)(5)

T95X156(1)010(2)(3)(4)(5)

T95Y226(1)010(2)(6)(4)(5)

T95Z336(1)010(2)(6)(4)(5)

T95Z476(1)010(2)(3)(4)(5)

T95R107(1)010(2)(3)(4)(5)

T95D127(1)010(2)(7)(4)(5)

T95R127(1)010(2)(6)(4)(5)

0.7

A, S, Z

1.0

A, S, Z

15

1.5

A, B, S, Z

A, S, Z

15

1.5

22

2.2

A, B, S, Z

A, S, Z

33

3.3

47

4.7

100

120

10.0

12.0

A, S, Z

A, B, C, S, Z

A, B, S, Z

Note

•

Part number definitions:

(1) Capacitance tolerance: K, M

(2) Termination and packaging: C, E, H, L

(3) Reliability level: A, S, Z

(4) Surge current: A, B, S

(5) ESR: L, S

(6) Reliability level: A, B, S, Z

(7) Reliability level: A, B, C, S, Z

Revision: 13-Feb-2020

Document Number: 40081

3

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T95

Vishay Sprague

www.vishay.com

STANDARD RATINGS

STD. (S)

LOW (L)

MAX. DF

AT +25 °C

120 Hz

(%)

MAX. DCL

AT +25 °C

(μA)

MAX. ESR MAX. ESR

AVAILABLE

CAPACITANCE

(μF)

CASE CODE

PART NUMBER

AT +25 °C AT +25 °C RELIABILITY

100 kHz

()

100 kHz

()

LEVELS

10 V_DCAT +85 °C; 7 V_DCAT +125 °C

150

220

330

470

680

D

R

D

R

D

R

T95D157(1)010(2)(3)(4)(5)

15.0

22.0

33.0

47.0

68.0

8

0.140

0.130

0.140

0.130

0.140

0.130

0.120

0.090

0.075

0.065

0.055

0.065

0.045

0.060

0.045

A, S, Z

T95R157(1)010(2)(3)(4)(5)

T95D227(1)010(2)(6)(4)(5)

T95R227(1)010(2)(3)(4)(5)

T95D337(1)010(2)(7)(4)(5)

T95R337(1)010(2)(6)(4)(5)

T95R477(1)010(2)(6)(4)(5)

T95R687(1)010(2)(6)(4)(5)

8

A, B, S, Z

A, S, Z

8

A, B, C, S, Z

A, B, S, Z

8

14

16 V_DCAT +85 °C; 10 V_DCAT +125 °C

2.2

3.3

4.7

6.8

10

S

V

A

X

B

Y

B

Z

R

C

D

R

T95S225(1)016(2)(3)(4)(5)

0.5

6

8

14

7.000

5.000

4.000

2.800

3.000

0.750

1.200

0.750

0.800

0.600

0.140

0.130

0.120

0.110

3.500

2.500

2.000

0.800

1.500

0.550

0.600

0.500

0.400

0.095

0.090

0.080

0.085

0.055

A, S, Z

T95S335(1)016(2)(3)(4)(5)

T95V475(1)016(2)(3)(4)(5)

T95A685(1)016(2)(3)(4)(5)

T95X685(1)016(2)(3)(4)(5)

T95X106(1)016(2)(3)(4)(5)

T95B156(1)016(2)(3)(4)(5)

T95Y156(1)016(2)(6)(4)(5)

T95B226(1)016(2)(6)(4)(5)

T95Z226(1)016(2)(3)(4)(5)

T95Z336(1)016(2)(3)(4)(5)

T95R686(1)016(2)(3)(4)(5)

T95C107(1)016(2)(6)(4)(5)

T95D107(1)016(2)(6)(4)(5)

T95D157(1)016(2)(6)(4)(5)

T95R187(1)016(2)(6)(4)(5)

T95R227(1)016(2)(6)(4)(5)

T95R337(1)016(2)(6)(4)(5)

0.8

A, S, Z

1.1

A, S, Z

1.1

A, S, Z

1.6

A, S, Z

15

2.4

A, S, Z

15

2.4

A, B, S, Z

A, S, Z

22

3.5

22

3.5

33

5.3

A, S, Z

68

10.9

16.0

24.0

28.8

35.2

52.8

A, S, Z

100

150

180

220

330

A, B, S, Z

20 V_DCAT +85 °C; 13 V_DCAT +125 °C

1.5

2.2

3.3

4.7

6.8

10

S

V

X

Y

Z

R

T95S155(1)020(2)(3)(4)(5)

0.5

6

8

7.000

6.000

3.000

2.000

1.200

0.800

0.200

0.140

3.500

3.000

1.500

1.000

0.600

0.400

0.110

0.090

0.080

0.075

A, S, Z

T95S225(1)020(2)(3)(4)(5)

T95V335(1)020(2)(3)(4)(5)

T95X475(1)020(2)(3)(4)(5)

T95X685(1)020(2)(3)(4)(5)

T95Y106(1)020(2)(3)(4)(5)

T95Z156(1)020(2)(3)(4)(5)

T95Z226(1)020(2)(3)(4)(5)

T95R476(1)020(2)(3)(4)(5)

T95R107(1)020(2)(6)(4)(5)

T95R127(1)020(2)(6)(4)(5)

T95R157(1)020(2)(6)(4)(5)

0.7

A, S, Z

0.9

A, S, Z

1.4

A, S, Z

2.0

A, S, Z

15

3.0

A, S, Z

22

4.4

A, S, Z

47

9.4

A, S, Z

100

120

150

20.0

24.0

30.0

A, B, S, Z

Note

•

Part number definitions:

(1) Capacitance tolerance: K, M

(2) Termination and packaging: C, E, H, L

(3) Reliability level: A, S, Z

(4) Surge current: A, B, S

(5) ESR: L, S

(6) Reliability level: A, B, S, Z

(7) Reliability level: A, B, C, S, Z

Revision: 13-Feb-2020

Document Number: 40081

4

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T95

Vishay Sprague

www.vishay.com

STANDARD RATINGS

STD. (S)

LOW (L)

MAX. DF

AT +25 °C

120 Hz

(%)

MAX. DCL

AT +25 °C

(μA)

MAX. ESR MAX. ESR

AVAILABLE

CAPACITANCE

(μF)

CASE CODE

PART NUMBER

AT +25 °C AT +25 °C RELIABILITY

100 kHz

()

100 kHz

()

LEVELS

25 V_DCAT +85 °C; 17 V_DCAT +125 °C

0.68

1.0

1.5

2.2

4.7

6.8

10

S

V

X

Y

C

Y

Z

D

R

D

R

D

R

T95S684(1)025(2)(3)(4)(5)

0.5

4

6

8

6

8

10.000

7.000

4.000

3.000

2.000

0.570

2.000

1.200

0.260

0.250

0.260

0.200

0.260

0.200

5.000

3.500

2.000

1.500

1.000

0.280

1.000

0.600

0.130

0.108

0.200

0.095

0.090

A, S, Z

T95S105(1)025(2)(3)(4)(5)

T95S155(1)025(2)(3)(4)(5)

T95V225(1)025(2)(3)(4)(5)

T95X475(1)025(2)(3)(4)(5)

T95Y685(1)025(2)(3)(4)(5)

T95C106(1)025(2)(6)(4)(5)

T95Y106(1)025(2)(3)(4)(5)

T95Z156(1)025(2)(3)(4)(5)

T95D336(1)025(2)(6)(4)(5)

T95R336(1)025(2)(6)(4)(5)

T95D476(1)025(2)(6)(4)(5)

T95R476(1)025(2)(3)(4)(5)

T95D686(1)025(2)(6)(4)(5)

T95R686(1)025(2)(6)(4)(5)

T95R107(1)025(2)(6)(4)(5)

0.5

0.6

1.2

A, S, Z

1.7

2.5

A, S, Z

A, B, S, Z

A, S, Z

10

15

33

3.8

8.3

A, S, Z

A, B, S, Z

A, S, Z

A, B, S, Z

47

68

11.8

17.0

25.0

68

100

35 V_DCAT +85 °C; 23 V_DCAT +125 °C

0.15

0.22

0.33

0.47

0.68

1.0

1.5

2.2

6.8

10

S

V

X

Z

C

D

R

T95S154(1)035(2)(3)(4)(5)

0.5

0.8

2.4

3.5

5.3

7.7

11.6

16.5

4

6

36.000

30.000

24.000

18.000

10.000

7.000

6.000

4.000

1.600

1.200

0.600

0.410

0.380

0.280

18.000

15.000

12.000

9.000

5.000

3.500

3.000

2.000

0.800

0.600

0.400

0.270

0.190

0.240

0.200

A, S, Z

T95S224(1)035(2)(3)(4)(5)

T95S334(1)035(2)(3)(4)(5)

T95S474(1)035(2)(3)(4)(5)

T95S684(1)035(2)(3)(4)(5)

T95S105(1)035(2)(3)(4)(5)

T95V155(1)035(2)(3)(4)(5)

T95X225(1)035(2)(3)(4)(5)

T95Z685(1)035(2)(6)(4)(5)

T95Z106(1)035(2)(3)(4)(5)

T95C156(1)035(2)(6)(4)(5)

T95D156(1)035(2)(3)(4)(5)

T95R156(1)035(2)(3)(4)(5)

T95R226(1)035(2)(3)(4)(5)

T95R336(1)035(2)(6)(4)(5)

T95R476(1)035(2)(6)(4)(5)

A, S, Z

A, B, S, Z

A, S, Z

A, B, S, Z

A, S, Z

15

22

33

A, S, Z

A, B, S, Z

47

50 V_DCAT +85 °C; 33 V_DCAT +125 °C

0.33

4.7

6.8

10

S

Z

T95S334(1)050(2)(6)(4)(5)

0.5

2.4

3.4

5.0

7.5

11.0

4

6

20.000

0.800

1.400

1.300

0.820

0.650

0.400

0.390

10.000

0.600

0.800

0.700

0.450

0.500

0.350

0.300

A, B, S, Z

A, S, Z

T95Z475(1)050(2)(3)(4)(5)

T95C475(1)050(2)(6)(4)(5)

T95C685(1)050(2)(6)(4)(5)

T95D685(1)050(2)(6)(4)(5)

T95R106(1)050(2)(6)(4)(5)

T95R156(1)050(2)(3)(4)(5)

T95R226(1)050(2)(6)(4)(5)

C

D

R

A, B, S, Z

A, S, Z

15

22

A, B, S, Z

Note

•

Part number definitions:

(1) Capacitance tolerance: K, M

(2) Termination and packaging: C, E, H, L

(3) Reliability level: A, S, Z

(4) Surge current: A, B, S

(5) ESR: L, S

(6) Reliability level: A, B, S, Z

(7) Reliability level: A, B, C, S, Z

Revision: 13-Feb-2020

Document Number: 40081

5

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T95

Vishay Sprague

www.vishay.com

POWER DISSIPATION

CASE CODE

MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR

A

B

C

D

R

S

V

X

Y

Z

0.075

0.085

0.110

0.150

0.250

0.080

0.095

0.110

0.120

0.135

STANDARD PACKAGING QUANTITY

UNITS PER REEL

CASE CODE

7" FULL REEL

2000

7" HALF REEL

1000

250

A

B

C

D

R

S

V

X

Y

Z

2000

500

250

600

300

2500

1250

1000

750

2500

2000

1500

750

PRODUCT INFORMATION

Conformal Coated Guide

Pad Dimensions

www.vishay.com/doc?40150

Packaging Dimensions

Moisture Sensitivity (MSL)

SELECTOR GUIDES

www.vishay.com/doc?40135

Solid Tantalum Selector Guide

Solid Tantalum Chip Capacitors

FAQ

www.vishay.com/doc?49053

www.vishay.com/doc?40091

Frequently Asked Questions

www.vishay.com/doc?40110

Revision: 13-Feb-2020

Document Number: 40081

6

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

Guide for Conformal Coated Tantalum Capacitors

Rating for rating, tantalum capacitors tend to have as much

INTRODUCTION

as three times better capacitance / volume efficiency than

aluminum electrolytic capacitors. An approximation of the

capacitance / volume efficiency of other types of capacitors

may be inferred from the following table, which shows the

dielectric constant ranges of the various materials used in

each type. Note that tantalum pentoxide has a dielectric

constant of 26, some three times greater than that of

aluminum oxide. This, in addition to the fact that extremely

thin films can be deposited during the electrolytic process

mentioned earlier, makes the tantalum capacitor extremely

efficient with respect to the number of microfarads available

per unit volume. The capacitance of any capacitor is

determined by the surface area of the two conducting

plates, the distance between the plates, and the dielectric

constant of the insulating material between the plates.

Tantalum electrolytic capacitors are the preferred choice in

applications where volumetric efficiency, stable electrical

parameters, high reliability, and long service life are primary

considerations. The stability and resistance to elevated

temperatures of the tantalum / tantalum oxide / manganese

dioxide system make solid tantalum capacitors an

appropriate choice for today's surface mount assembly

technology.

Vishay Sprague has been a pioneer and leader in this field,

producing a large variety of tantalum capacitor types for

consumer, industrial, automotive, military, and aerospace

electronic applications.

Tantalum is not found in its pure state. Rather, it is

commonly found in a number of oxide minerals, often in

combination with Columbium ore. This combination is

known as “tantalite” when its contents are more than

one-half tantalum. Important sources of tantalite include

Australia, Brazil, Canada, China, and several African

countries. Synthetic tantalite concentrates produced from

tin slags in Thailand, Malaysia, and Brazil are also a

significant raw material for tantalum production.

COMPARISON OF CAPACITOR

DIELECTRIC CONSTANTS

e

DIELECTRIC

DIELECTRIC CONSTANT

Air or vacuum

Paper

1.0

Electronic applications, and particularly capacitors,

consume the largest share of world tantalum production.

Other important applications for tantalum include cutting

tools (tantalum carbide), high temperature super alloys,

chemical processing equipment, medical implants, and

military ordnance.

2.0 to 6.0

2.1 to 6.0

2.2 to 2.3

2.7 to 2.8

3.8 to 4.4

4.8 to 8.0

5.1 to 5.9

5.4 to 8.7

8.4

Plastic

Mineral oil

Silicone oil

Quartz

Vishay Sprague is a major user of tantalum materials in the

form of powder and wire for capacitor elements and rod and

sheet for high temperature vacuum processing.

Glass

Porcelain

Mica

THE BASICS OF TANTALUM CAPACITORS

Most metals form crystalline oxides which are

non-protecting, such as rust on iron or black oxide on

copper. A few metals form dense, stable, tightly adhering,

electrically insulating oxides. These are the so-called “valve”

metals and include titanium, zirconium, niobium, tantalum,

hafnium, and aluminum. Only a few of these permit the

accurate control of oxide thickness by electrochemical

means. Of these, the most valuable for the electronics

industry are aluminum and tantalum.

Aluminum oxide

Tantalum pentoxide

Ceramic

26

12 to 400K

In the tantalum electrolytic capacitor, the distance between

the plates is very small since it is only the thickness of the

tantalum pentoxide film. As the dielectric constant of the

tantalum pentoxide is high, the capacitance of a tantalum

capacitor is high if the area of the plates is large:

Capacitors are basic to all kinds of electrical equipment,

from radios and television sets to missile controls and

automobile ignitions. Their function is to store an electrical

charge for later use.

eA

t

------

C =

where

Capacitors consist of two conducting surfaces, usually

metal plates, whose function is to conduct electricity. They

are separated by an insulating material or dielectric. The

dielectric used in all tantalum electrolytic capacitors is

tantalum pentoxide.

C = capacitance

e = dielectric constant

A = surface area of the dielectric

t = thickness of the dielectric

Tantalum pentoxide compound possesses high-dielectric

strength and a high-dielectric constant. As capacitors are

being manufactured, a film of tantalum pentoxide is applied

to their electrodes by means of an electrolytic process. The

film is applied in various thicknesses and at various voltages

and although transparent to begin with, it takes on different

colors as light refracts through it. This coloring occurs on the

tantalum electrodes of all types of tantalum capacitors.

Tantalum capacitors contain either liquid or solid

electrolytes. In solid electrolyte capacitors, a dry material

(manganese dioxide) forms the cathode plate. A tantalum

lead is embedded in or welded to the pellet, which is in turn

connected to a termination or lead wire. The drawings show

the construction details of the surface mount types of

tantalum capacitors shown in this catalog.

Revision: 17-Jun-2021

Document Number: 40150

1

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

SOLID ELECTROLYTE TANTALUM CAPACITORS

TYPE 194D

Solid electrolyte capacitors contain manganese dioxide,

which is formed on the tantalum pentoxide dielectric layer

by impregnating the pellet with a solution of manganous

nitrate. The pellet is then heated in an oven, and the

manganous nitrate is converted to manganese dioxide.

The pellet is next coated with graphite, followed by a layer

of metallic silver, which provides a conductive surface

between the pellet and the can in which it will be enclosed.

After assembly, the capacitors are tested and inspected to

assure long life and reliability. It offers excellent reliability

and high stability for consumer and commercial electronics

with the added feature of low cost.

SnPb or Gold Plated Ni Cathode

End Cap Termination

Encapsulation

SnPb or Gold Plated Ni Anode

End Cap Termination

Cathode

Backfill

Conductive Silver

Epoxy Adhesive

Surface mount designs of “Solid Tantalum” capacitors use

lead frames or lead frameless designs as shown in the

accompanying drawings.

Sintered Tantalum

Pellet

Sponge Teflon

Anode Backfill

MnO₂/Carbon/

Silver Coating

TANTALUM CAPACITORS FOR ALL DESIGN

CONSIDERATIONS

TYPE T96

Solid electrolyte designs are the least expensive for a given

rating and are used in many applications where their very

small size for a given unit of capacitance is of importance.

They will typically withstand up to about 10 % of the rated

DC working voltage in a reverse direction. Also important

are their good low temperature performance characteristics

and freedom from corrosive electrolytes.

Intermediate

Fuse

Cathode

Silver

Vishay Sprague patented the original solid electrolyte

capacitors and was the first to market them in 1956. Vishay

Sprague has the broadest line of tantalum capacitors and

has continued its position of leadership in this field. Data

sheets covering the various types and styles of Vishay

Sprague capacitors for consumer and entertainment

electronics, industry, and military applications are available

where detailed performance characteristics must be

specified.

Cathode Termination

(Silver + Ni/Sn or

Ni/SnPb Plating)

MnO₂/Carbon/

Silver Coating

Encapsulation

Epoxy Tower/

Sponge Teflon

Anode Termination

(Silver + Ni/Sn or

Ni/SnPb Plating)

Sintered Tantalum

Pellet

TYPE 195D, 591D, 592D / 592W, 594D,

595D, 695D, T95, 14002

Cathode Termination

(Silver + Ni/Sn/Plating)

TYPE T98

Encapsulation

Fuse

Anode Termination

(Silver + Ni/Sn/Plating)

Intermediate

Cathode

Silver

MnO

₂/Carbon/Silver

Coating

Sintered Tantalum

Pellet

Sponge Teflon/Epoxy Tower

Cathode Termination

(Silver + Ni/Sn or

Ni/SnPb Plating)

TYPE 597D / T97 / 13008

MnO₂/Carbon/

Silver Coating

Epoxy Tower/

Sponge Teflon

Cathode Termination

Encapsulation

(Silver + Ni/Sn/Plating)

Encapsulation

Anode Termination

(Silver + Ni/Sn/Plating)

Anode Termination

(Silver + Ni/Sn or

Ni/SnPb Plating)

Sintered Tantalum

Pellet

MnO₂/Carbon/Silver

Coating

Silver Epoxy

Sponge Teflon/Epoxy Tower

Sintered Tantalum

Pellet

Revision: 17-Jun-2021

Document Number: 40150

2

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

COMMERCIAL PRODUCTS

SOLID TANTALUM CAPACITORS - CONFORMAL COATED

SERIES

592W

592D

591D

595D

594D

PRODUCT IMAGE

TYPE

Surface mount TANTAMOUNT™ chip, conformal coated

Low profile, robust

design for use in

pulsed applications

Low profile,

maximum CV

Low profile, low ESR,

maximum CV

Low ESR,

maximum CV

FEATURES

Maximum CV

-55 °C to +125 °C

(above 40 °C, voltage

deratig is required)

TEMPERATURE

RANGE

-55 °C to +125 °C (above 85 °C, voltage derating is required)

CAPACITANCE

RANGE

330 μF to 2200 μF

6 V to 10 V

20 %

1 μF to 2200 μF

4 V to 50 V

1 μF to 1500 μF

4 V to 50 V

0.1 μF to 1500 μF

4 V to 50 V

1 μF to 1500 μF

4 V to 50 V

VOLTAGE RANGE

CAPACITANCE

TOLERANCE

10 %, 20 %

LEAKAGE

CURRENT

0.01 CV or 0.5 ꢀA, whichever is greater

DISSIPATION

FACTOR

14 % to 45 %

4 % to 50 %

4 % to 20 %

B, C, D, R

T, S, A, B, C,

D, G, M, R

CASE CODES

TERMINATION

C, M, X

S, A, B, C, D, R, M, X

A, B, C, D, R, M

100 % matte tin

100 % matte tin standard, tin / lead and gold plated available

SOLID TANTALUM CAPACITORS - CONFORMAL COATED

SERIES

597D

695D

195D

194D

PRODUCT IMAGE

TYPE

TANTAMOUNT™ chip, conformal coated

Ultra low ESR, maximum

CV, multi-anode

Pad compatible with

194D and CWR06

US and European

case sizes

Industrial version of

CWR06 / CWR16

FEATURES

TEMPERATURE

RANGE

-55 °C to +125 °C (above 85 °C, voltage derating is required)

CAPACITANCE

RANGE

10 μF to 2200 μF

4 V to 75 V

0.1 μF to 270 μF

4 V to 50 V

0.1 μF to 330 μF

2 V to 50 V

0.1 μF to 330 μF

4 V to 50 V

VOLTAGE RANGE

CAPACITANCE

TOLERANCE

10 %, 20 %

0.01 CV or 0.5 ꢀA, whichever is greater

LEAKAGE

CURRENT

DISSIPATION

FACTOR

6 % to 20 %

4 % to 8 %

4 % to 10 %

C, S, V, X, Y, Z, R,

A, B, D, E, F, G, H

CASE CODES

V, D, E, R, F, Z, M, H

A, B, D, E, F, G, H

A, B, C, D, E, F, G, H

Gold plated standard;

tin / lead solder plated

and hot solder

100 % matte tin

standard, tin / lead

solder plated available

100 % matte tin standard,

tin / lead and gold plated available

TERMINATION

dipped available

Revision: 17-Jun-2021

Document Number: 40150

3

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

HIGH RELIABILITY PRODUCTS

SOLID TANTALUM CAPACITORS - CONFORMAL COATED

SERIES

CWR06

CWR16

CWR26

13008

14002

PRODUCT IMAGE

TYPE

TANTAMOUNT™ chip, conformal coated

MIL-PRF-55365/4 MIL-PRF-55365/13 MIL-PRF-55365/13

FEATURES

DLA approved

qualified

TEMPERATURE RANGE

-55 °C to +125 °C (above 85 °C, voltage derating is required)

CAPACITANCE RANGE

VOLTAGE RANGE

0.10 μF to 100 μF

4 V to 50 V

0.33 μF to 330 μF

4 V to 35 V

10 μF to 100 μF

15 V to 35 V

10 μF to 1500 μF

4 V to 63 V

4.7 μF to 680 μF

4 V to 50 V

5 %, 10 %,

20 %

5 %, 10 %,

20 %

5 %, 10 %,

20 %

CAPACITANCE TOLERANCE

10 %, 20 %

LEAKAGE CURRENT

DISSIPATION FACTOR

0.01 CV or 1.0 ꢀA, whichever is greater

0.01 CV or 0.5 ꢀA, whichever is greater

6 % to 10 %

6 % to 12 %

F, G, H

6 % to 20 %

6 % to 14 %

B, C, D, R

A, B, C, D, E, F, G, A, B, C, D, E, F, G,

V, E, F, R, Z, D, M,

H, N

CASE CODES

TERMINATION

H

Gold plated; tin / lead; tin / lead solder fused

Tin / lead

SOLID TANTALUM CAPACITORS - CONFORMAL COATED

SERIES

T95

T96

T97

T98

PRODUCT IMAGE

TYPE

TANTAMOUNT™ chip, Hi-Rel COTS, conformal coated

High reliability,

ultra low ESR, built in

fuse, multi-anode

FEATURES

High reliability

ultra low ESR,

built in fuse

multi-anode

TEMPERATURE RANGE

-55 °C to +125 °C (above 85 °C, voltage derating is required)

CAPACITANCE RANGE

VOLTAGE RANGE

0.15 μF to 680 μF

4 V to 50 V

10 μF to 680 μF

4 V to 50 V

10 μF to 2200 μF

4 V to 75 V

10 μF to 1500 μF

4 V to 75 V

CAPACITANCE TOLERANCE

LEAKAGE CURRENT

DISSIPATION FACTOR

CASE CODES

10 %, 20 %

0.01 CV or 0.5 ꢀA, whichever is greater

4 % to 14 %

6 % to 14 %

R

6 % to 20 %

6 % to 10 %

A, B, C, D, R, S, V, X, Y, Z

V, E, F, R, Z, D, M, H, N

V, E, F, R, Z, M, H

TERMINATION

100 % matte tin, tin / lead

Revision: 17-Jun-2021

Document Number: 40150

4

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

TAPE AND REEL PACKAGING in inches [millimeters]

0.157 0.004

[4.0 0.10]

10 pitches cumulative

tolerance on tape

0.008 [0.200]

T₂

(max.)

Deformation

between

embossments

0.059 + 0.004 - 0.0

[1.5 + 0.10 - 0.0]

Embossment

0.024

[0.600]

max.

0.079 0.002

[2.0 0.05]

0.069 0.004

[1.75 0.10]

Top

cover

tape

A₀

0.030 [0.75]

min. ⁽³⁾

20°

F

W

B₁(max.) ⁽⁶⁾

K₀

Top

cover

tape

Maximum

component

rotation

B₀

P₁

0.030 [0.75]

min. ⁽⁴⁾

(Side or front sectional view)

Center lines

of cavity

For tape feeder

reference only

including draft.

D

₁(min.) for components

0.004 [0.10]

max.

(5)

.

0.079 x 0.047 [2.0 x 1.2] and larger

USER DIRECTION

OF FEED

Maximum

cavity size ⁽¹⁾

Concentric around B₀

Cathode (-)

R minimum:

8 mm = 0.984" (25 mm)

12 mm and 16 mm = 1.181" (30 mm)

R

Anode (+)

min.

DIRECTION OF FEED

Bending radius ⁽²⁾

Tape and reel specifications: all case sizes are

available on plastic embossed tape per EIA-481.

Standard reel diameter is 7" (178 mm).

3.937 [100.0]

20° maximum

component rotation

0.039 [1.0]

max.

Lengthwise orientation at capacitors in tape

Typical

component

cavity

center line

Tape

0.039 [1.0]

max.

Cathode (-)

B₀

0.9843 [250.0]

Typical

Camber

component

center line

(Top view)

A₀

Allowable camber to be 0.039/3.937 [1/100]

Non-cumulative over 9.843 [250.0]

(Top view)

Anode (+)

DIRECTION OF FEED

H-Case only

Notes

•

(1)

Metric dimensions will govern. Dimensions in inches are rounded and for reference only

A₀, B₀, K₀, are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body

dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the

cavity (A₀, B₀, K₀) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent

rotation of the component within the cavity of not more than 20°

(2)

(3)

(4)

(5)

(6)

Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide

“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum

This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed

cavities or to the edge of the cavity whichever is less

This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier

tape between the embossed cavity or to the edge of the cavity whichever is less

The embossed hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of

embossment location shall be applied independent of each other

B₁dimension is a reference dimension tape feeder clearance only

Revision: 17-Jun-2021

Document Number: 40150

5

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

CARRIER TAPE DIMENSIONS in inches [millimeters]

TAPE WIDTH

W

D₀

P₂

F

E₁

E_{2 min.}

0.315

0.14 0.0019

[3.5 0.05]

0.246

[6.25]

8 mm

+ 0.012 / - 0.004

[8.0 + 0.3 / - 0.1]

0.078 0.0019

[2.0 0.05]

0.479

+ 0.012 / - 0.004

[12.0 + 0.3 / - 0.1]

0.216 0.0019

[5.5 0.05]

0.403

[10.25]

12 mm

0.059

+ 0.004 / - 0

[1.5 + 0.1 / - 0]

0.324 0.004

[1.75 0.1]

0.635

+ 0.012 / - 0.004

[16.0 + 0.3 / - 0.1]

0.295 0.004

[7.5 0.1]

0.570

[14.25]

16 mm

24 mm

0.078 0.004

[2.0 0.1]

0.453 0.004

[11.5 0.1]

0.945 0.012

[24.0 0.3]

0.876

[22.25]

CARRIER TAPE DIMENSIONS in inches [millimeters]

TAPE WIDTH

TYPE

CASE CODE

W

P₁

K_{0 max.}

B_{1 max.}

IN mm

A

B

C

D

M

R

S

T

8

0.058 [1.47]

0.088 [2.23]

0.091 [2.30]

0.088 [2.23]

0.058 [1.47]

0.088 [2.23]

0.149 [3.78]

0.166 [4.21]

0.290 [7.36]

0.300 [7.62]

0.311 [7.90]

0.296 [7.52]

0.139 [3.53]

0.166 [4.21]

0.157 0.004

[4.0 0.10]

12

16

12

8

0.315 0.004

[8.0 0.10]

592D

592W

591D

0.157 0.004

[4.0 0.10]

12

0.472 0.004

[12.0 0.10]

X

24

0.011 [2.72]

0.594 [15.1]

A

B

C

D

G

H

8

0.063 [1.60]

0.088 [2.23]

0.118 [2.97]

0.119 [3.02]

0.111 [2.83]

0.098 [2.50]

0.152 [3.86]

0.166 [4.21]

0.290 [7.36]

0.296 [7.52]

0.234 [5.95]

0.232 [5.90]

0.157 0.004

[4.0 0.10]

12

0.315 0.004

[8.0 0.10]

595D

594D

0.157 0.004

[4.0 0.10]

M

R

12

0.085 [2.15]

0.148 [3.78]

0.152 [3.85]

0.296 [7.52]

0.315 0.004

[8.0 0.10]

S

T

8

0.058 [1.47]

0.054 [1.37]

0.058 [1.47]

0.059 [1.50]

0.063 [1.62]

0.074 [1.88]

0.149 [3.78]

0.093 [2.36]

0.139 [3.53]

0.189 [4.80]

0.191 [4.85]

0.239 [6.07]

0.157 0.004

[4.0 0.10]

A

B

D

E

8

12

0.157 0.004

[4.0 0.10]

695D

0.315 0.004

[8.0 0.10]

F

G

H

12

16

0.075 [1.93]

0.109 [2.77]

0.124 [3.15]

0.259 [6.58]

0.301 [7.65]

0.31 [7.87]

0.157 0.004

[4.0 0.10]

0.315 0.004

[8.0 0.10]

Revision: 17-Jun-2021

Document Number: 40150

6

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

CARRIER TAPE DIMENSIONS in inches [millimeters]

TAPE WIDTH

TYPE

CASE CODE

W

P₁

K_{0 max.}

B_{1 max.}

IN mm

A

B

C

D

E

8

12

8

12

0.058 [1.47]

0.059 [1.50]

0.054 [1.37]

0.067 [1.70]

0.074 [1.88]

0.139 [3.53]

0.189 [4.80]

0.093 [2.36]

0.179 [4.55]

0.239 [6.07]

0.157 0.004

[4.0 0.10]

0.315 0.004

[8.0 0.10]

0.157 0.004

[4.0 0.10]

0.472 0.004

[12.0 0.1]

0.315 0.004

[8.0 0.10]

F

G

12

0.076 [1.93]

0.109 [2.77]

0.122 [3.11]

0.149 [3.78]

0.259 [6.58]

0.301 [7.65]

0.163 [4.14]

0.296 [7.52]

195D

H ⁽¹⁾

R

S

V

X

Y

Z

A

B

C

D

E

8

12

8

12

16

0.058 [1.47]

0.060 [1.52]

0.069 [1.75]

0.089 [2.26]

0.114 [2.89]

0.069 [1.75]

0.073 [1.85]

0.069 [1.75]

0.068 [1.72]

0.074 [1.88]

0.091 [2.31]

0.134 [3.40]

0.129 [3.28]

0.150 [3.80]

0.173 [4.40]

0.205 [5.20]

0.224 [5.70]

0.193 [4.90]

0.283 [7.20]

0.159 [4.05]

0.149 [3.78]

0.150 [3.80]

0.296 [7.52]

0.288 [7.31]

0.139 [3.53]

0.189 [4.80]

0.244 [6.20]

0.191 [4.85]

0.239 [6.07]

0.262 [6.65]

0.289 [7.34]

0.319 [8.10]

0.313 [7.95]

0.343 [8.70]

0.309 [7.85]

0.313 [7.95]

0.339 [8.60]

0.323 [8.20]

0.313 [7.95]

0.157 0.004

[4.0 0.10]

0.157 0.004

[4.0 0.10]

194D

CWR06

CWR16

CWR26

F

0.315 0.004

[8.0 0.10]

G

H

D

E

0.317 0.004

[8.0 0.10]

F

H

M

N

R

0.476 0.004

[12.0 0.1]

597D

T97

13008

0.317 0.004

[8.0 0.10]

0.476 0.004

[12.0 0.1]

V

Z

12

16

0.088 [2.23]

0.239 [6.06]

0.300 [7.62]

0.311 [7.90]

A

B

C

D

R

S

V

X

Y

Z

B

C

D

R

8

0.063 [1.60]

0.088 [2.23]

0.117 [2.97]

0.119 [3.02]

0.149 [3.78]

0.058 [1.47]

0.060 [1.52]

0.069 [1.75]

0.089 [2.26]

0.114 [2.89]

0.088 [2.23]

0.117 [2.97]

0.119 [3.02]

0.149 [3.78]

0.152 [3.86]

0.166 [4.21]

0.290 [7.36]

0.296 [7.52]

0.149 [3.78]

0.150 [3.80]

0.296 [7.52]

0.288 [7.31]

0.166 [4.21]

0.290 [7.36]

0.296 [7.52]

0.157 0.004

[4.0 0.10]

12

8

0.317 0.004

[8.0 0.10]

T95

8

0.157 0.004

[4.0 0.10]

12

0.157 0.004

[4.0 0.10]

14002

0.317 0.004

[8.0 0.10]

0.476 0.004

[12.0 0.1]

T96

T98

R

16

0.159 [4.05]

0.313 [7.95]

F

M

Z

16

0.239 [6.06]

0.193 [4.90]

0.272 [6.90]

0.311 [7.90]

0.339 [8.60]

0.307 [7.80]

0.476 0.004

[12.0 0.1]

Note

(1)

H case only, packaging code T: lengthwise orientation at capacitors in tape

Revision: 17-Jun-2021

Document Number: 40150

7

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

PAD DIMENSIONS in inches [millimeters]

B

C

B

A

CASE CODE

592D / W - 591D

WIDTH (A)

PAD METALLIZATION (B)

SEPARATION (C)

A

B

C

D

0.075 [1.9]

0.118 [3.0]

0.136 [3.5]

0.180 [4.6]

0.050 [1.3]

0.059 [1.5]

0.050 [1.3]

0.059 [1.5]

0.122 [3.1]

0.134 [3.4]

0.090 [2.3]

Anode pad: 0.095 [2.4]

Cathode pad: 0.067 [1.7]

Anode pad: 0.095 [2.4]

Cathode pad: 0.067 [1.7]

0.032 [0.8]

M

R

0.256 [6.5]

0.240 [6.1]

0.138 [3.5]

0.118 [3.0]

S

X

0.067 [1.7]

0.310 [7.9]

0.043 [1.1]

0.360 [9.2]

0.120 [3.0]

595D - 594D

T

S

0.059 [1.5]

0.067 [1.7]

0.083 [2.1]

0.118 [3.0]

0.136 [3.5]

0.180 [4.6]

0.156 [4.05]

0.110 [2.8]

0.248 [6.3]

0.028 [0.7]

0.032 [0.8]

0.050 [1.3]

0.059 [1.5]

0.090 [2.3]

0.087 [2.2]

0.090 [2.3]

0.024 [0.6]

0.043 [1.1]

0.050 [1.3]

0.059 [1.5]

0.122 [3.1]

0.134 [3.4]

0.082 [2.1]

0.134 [3.4]

0.140 [3.6]

A

B

C

D

G

M

R

195D

A

B

C

D

E

F

0.067 [1.7]

0.063 [1.6]

0.059 [1.5]

0.090 [2.3]

0.140 [3.6]

0.110 [2.8]

0.154 [3.9]

0.244 [6.2]

0.248 [6.3]

0.079 [2.0]

0.114 [2.9]

0.118 [3.0]

0.043 [1.1]

0.047 [1.2]

0.031 [0.8]

0.055 [1.4]

0.063 [1.6]

0.059 [1.5]

0.063 [1.6]

0.079 [2.0]

0.090 [2.3]

0.039 [1.0]

0.067 [1.7]

0.028 [0.7]

0.047 [1.2]

0.024 [0.6]

0.047 [1.2]

0.079 [2.0]

0.087 [2.2]

0.126 [3.2]

0.140 [3.6]

0.118 [3.0]

0.140 [3.6]

0.039 [1.0]

0.122 [3.1]

G

H

N

R

S

V

X

Y

Z

Revision: 17-Jun-2021

Document Number: 40150

8

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

PAD DIMENSIONS in inches [millimeters]

B

C

B

A

CASE CODE

WIDTH (A)

PAD METALLIZATION (B)

SEPARATION (C)

CWR06 / CWR16 / CWR26 - 194D - 695D

A

0.065 [1.6]

0.115 [2.9]

0.150 [3.8]

0.125 [3.2]

0.165 [4.2]

0.50 [1.3]

0.70 [1.8]

0.90 [2.3]

0.040 [1.0]

0.055 [1.4]

0.120 [3.0]

0.070 [1.8]

0.120 [3.0]

0.140 [3.6]

0.170 [4.3]

B

C

D

E

F

G

H

T95

B

0.120 [3.0]

0.136 [3.5]

0.180 [4.6]

0.248 [6.3]

0.080 [2.03]

0.114 [2.9]

0.059 [1.5]

0.090 [2.3]

0.040 [1.02]

0.065 [1.65]

0.059 [1.5]

0.120 [3.1]

0.136 [3.47]

0.140 [3.6]

0.040 [1.02]

0.122 [3.1]

C

D

R

S

V

X, Y, Z

14002

B

0.120 [3.0]

0.136 [3.5]

0.180 [4.6]

0.248 [6.3]

0.059 [1.5]

0.090 [2.3]

0.059 [1.5]

0.120 [3.1]

0.136 [3.47]

0.140 [3.6]

C

D

R

T96

R

597D - T97 - T98 - 13008

D, E, V

0.248 [6.3]

0.090 [2.3]

0.140 [3.6]

0.196 [4.9]

0.260 [6.6]

0.284 [7.2]

0.090 [2.3]

0.140 [3.6]

F, R, Z

M, H, N

Revision: 17-Jun-2021

Document Number: 40150

9

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

RECOMMENDED REFLOW PROFILES

Capacitors should withstand reflow profile as per J-STD-020 standard, three cycles.

T_p

T_C- 5 °C

t_p

Max. ramp-up rate = 3 °C/s

Max. ramp-down rate = 6 °C/s

T_L

t_L

T_{s max.}

Preheat area

T_{s min.}

t_s

25

Time 25 °C to peak

TIME (s)

PROFILE FEATURE

Preheat / soak

SnPb EUTECTIC ASSEMBLY

LEAD (Pb)-FREE ASSEMBLY

Temperature min. (T_{s min.}

)

100 °C

150 °C

200 °C

Temperature max. (T_{s max.}

)

Time (t_s) from (T_{s min.}to T_{s max.}

Ramp-up

)

60 s to 120 s

Ramp-up rate (T_Lto T_p)

Liquidus temperature (T_L)

Time (t_L) maintained above T_L

3 °C/s max.

183 °C

3 °C/s max.

217 °C

60 s to 150 s

Peak package body temperature (T_p)

Depends on type and case – see table below

Time (t_p)* within 5 °C of the specified

classification temperature (T_c)

20 s

30 s

Ramp-down

Ramp-down rate (T_pto T_L)

Time 25 °C to peak temperature

6 °C/s max.

6 min max.

6 °C/s max.

8 min max.

PEAK PACKAGE BODY TEMPERATURE (T_p)

TYPE / CASE CODE

SnPb EUTECTIC PROCESS

235 °C

LEAD (Pb)-FREE PROCESS

260 °C

591D / 592D - all cases, except X25H, M and R cases

591D / 592D - X25H, M and R cases

594D / 595D - all cases except C, D, and R

594D / 595D - C, D, and R case

T95 A, B, S, V, X, Y cases

220 °C

235 °C

220 °C

235 °C

220 °C

235 °C

220 °C

235 °C

220 °C

235 °C

220 °C

235 °C

220 °C

250 °C

260 °C

250 °C

260 °C

250 °C

n/a

T95 C, D, R, and Z cases

14002 B case

14002 C, D, and R cases

n/a

T96 R case

250 °C

260 °C

250 °C

260 °C

250 °C

260 °C

250 °C

195D all cases, except G, H, R, and Z

195D G, H, R, and Z cases

695D all cases, except G and H cases

695D G, H cases

597D, T97, T98 all cases, except V case

597D, T97, T98 V case

194D all cases, except H and G cases

194D H and G cases

Revision: 17-Jun-2021

Document Number: 40150

10

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Conformal Coated Guide

www.vishay.com

Vishay Sprague

GUIDE TO APPLICATION

1.

AC Ripple Current: the maximum allowable ripple

5.

Power Dissipation: power dissipation will be

affected by the heat sinking capability of the

mounting surface. Non-sinusoidal ripple current may

produce heating effects which differ from those

shown. It is important that the equivalent I_RMSvalue

be established when calculating permissible

operating levels. (Power dissipation calculated using

derating factor (see paragraph 4)).

current shall be determined from the formula:

P

R_ESR

I_RMS

=

------------

where,

P =

power dissipation in W at +25 °C as given in

the tables in the product datasheets (Power

Dissipation).

6.

Attachment:

6.1

Soldering: capacitors can be attached by

conventional soldering techniques: vapor phase,

convection reflow, infrared reflow, and hot plate

methods. The soldering profile charts show

recommended time / temperature conditions for

soldering. Preheating is recommended. The

recommended maximum ramp rate is 2 °C per

second. Attachment with a soldering iron is not

recommended due to the difficulty of controlling

temperature and time at temperature. The soldering

iron must never come in contact with the capacitor.

For details see www.vishay.com/doc?40214.

R

_ESR= the capacitor equivalent series resistance at

the specified frequency

2.

AC Ripple Voltage: the maximum allowable ripple

voltage shall be determined from the formula:

V_RMS= I_RMSx Z

or, from the formula:

P

V_RMS= Z ------------

R_ESR

where,

7.

8.

Recommended Mounting Pad Geometries: the nib

must have sufficient clearance to avoid electrical

contact with other components. The width

dimension indicated is the same as the maximum

width of the capacitor. This is to minimize lateral

movement.

P =

power dissipation in W at +25 °C as given in

the tables in the product datasheets (Power

Dissipation).

R_ESR= the capacitor equivalent series resistance at

the specified frequency

Z =

the capacitor impedance at the specified

frequency

Cleaning (Flux Removal) After Soldering:

TANTAMOUNT™ capacitors are compatible with all

commonly used solvents such as TES, TMS, Prelete,

Chlorethane, Terpene and aqueous cleaning media.

However, CFC / ODS products are not used in the

production of these devices and are not

recommended. Solvents containing methylene

chloride or other epoxy solvents should be avoided

since these will attack the epoxy encapsulation

material.

2.1

2.2

The sum of the peak AC voltage plus the applied DC

voltage shall not exceed the DC voltage rating of the

capacitor.

The sum of the negative peak AC voltage plus

the applied DC voltage shall not allow a voltage

reversal exceeding 10 % of the DC working voltage

at +25 °C.

3.

4.

Reverse Voltage: solid tantalum capacitors are not

intended for use with reverse voltage applied.

However, they have been shown to be capable of

withstanding momentary reverse voltage peaks of up

to 10 % of the DC rating at 25 °C and 5 % of the DC

rating at +85 °C.

Temperature Derating: if these capacitors are to be

operated at temperatures above +25 °C, the

permissible RMS ripple current shall be calculated

using the derating factors as shown:

TEMPERATURE

+25 °C

DERATING FACTOR

1.0

0.9

0.4

+85 °C

+125 °C

Revision: 17-Jun-2021

Document Number: 40150

11

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Typical Performance Characteristics

www.vishay.com

Vishay Sprague

COTS Tantalum Capacitors

ELECTRICAL PERFORMANCE CHARACTERISTICS

ITEM

PERFORMANCE CHARACTERISTICS

Category temperature range

Capacitance tolerance

Dissipation factor

ESR

-55 °C to +85 °C (to +125 °C with voltage derating)

20 %, 10 %, tested via bridge method, at 25 °C, 120 Hz

Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 120 Hz

Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 100 kHz

Leakage current

After application of rated voltage applied to capacitors for 5 min using a steady source of power with 1 kΩ

resistor in series with the capacitor under test, leakage current at 25 °C is not more than 0.01 CV or

0.5 μA, whichever is greater. Note that the leakage current varies with temperature and applied voltage.

See graph below for the appropriate adjustment factor.

Capacitance change by

temperature

+15 % max. (at +125 °C)

+10 % max. (at +85 °C)

-10 % max. (at -55 °C)

Reverse voltage

Capacitors are capable of withstanding peak voltages in the reverse direction equal to:

10 % of the DC rating at +25 °C

5 % of the DC rating at +85 °C

1 % of the DC rating at +125 °C

Vishay does not recommend intentional or repetitive application of reverse voltage.

Ripple current

For maximum ripple current values (at 25 °C) refer to relevant datasheet. If capacitors are to be used at

temperatures above +25 °C, the permissible RMS ripple current (or voltage) shall be calculated using the

derating factors:

1.0 at +25 °C

0.9 at +85 °C

0.4 at +125 °C

Maximum operating and surge

voltages vs. temperature

+85 °C

+125 °C

CATEGORY VOLTAGE

RATED VOLTAGE

(V)

SURGE VOLTAGE

(V)

SURGE VOLTAGE

(V)

2.7

4.0

7.0

10

13

17

23

26

33

42

50

4.0

6.3

10

5.2

8.0

13

20

26

32

46

52

65

60

75

3.4

5.0

8.0

12

16

20

28

31

40

50

16

20

25

35

40

50

50 ⁽¹⁾

63

75

VOLTAGE RAIL

CAPACITOR VOLTAGE RATING

Recommended voltage

derating guidelines

(below 85 °C) ⁽²⁾

≤ 3.3

5

6.3

10

20

12

25

15

35

≥ 24

28

50 or series configuration

63 or series configuration

75 or series configuration

≥ 32

Notes

•

(1)

All information presented in this document reflects typical performance characteristics

For more information about recommended voltage derating see: www.vishay.com/doc?40246

Capacitance value 15 μF and higher

For temperatures above +85 °C the same voltage derating ratio is recommended, but with respect to category voltage: up to +85 °C:

category voltage = rated voltage; at +125 °C: category voltage = 2/3 of rated voltage, between these temperatures it decreases linearly -

see graph below

(2)

Revision: 12-Aug-2021

Document Number: 40209

1

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Typical Performance Characteristics

www.vishay.com

Vishay Sprague

CATEGORY VOLTAGE VS. TEMPERATURE

Axis Title

10000

1.2

1.0

0.8

0.6

0.4

0.2

0

1000

100

10

-55

0

25

55

85

105

125

Temperature (°C)

TYPICAL LEAKAGE CURRENT TEMPERATURE FACTOR

Axis Title

100

10000

1000

100

10

1

+125 °C

+85 °C

0.1

+55 °C

+25 °C

0.01

0 °C

-55 °C

0.001

10

0

10

20

30

40

50

60

70

80

90

100

Percent of Rated Voltage

Notes

•

At +25 °C, the leakage current shall not exceed the value listed in the Standard Ratings table.

At +85 °C, the leakage current shall not exceed 10 times the value listed in the Standard Ratings table.

At +125 °C, the leakage current shall not exceed 12 times the value listed in the Standard Ratings table

Revision: 12-Aug-2021

Document Number: 40209

2

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Typical Performance Characteristics

www.vishay.com

Vishay Sprague

ENVIRONMENTAL PERFORMANCE CHARACTERISTICS

ITEM

CONDITION

POST TEST PERFORMANCE

Surge voltage

MIL-PRF-55365

Capacitance change

Dissipation factor

Leakage current

Within 10 % of initial value

Initial specified limit

1000 successive test cycles at 85 °C of surge

voltage (as specified in the table above), in

series with a 33 Ω resistor at the rate of

30 s ON, 30 s OFF

Life test at +85 °C

Life test at +125 °C

Moisture resistance

MIL-STD-202, method 108

1000 h application of rated voltage at 85 °C

Capacitance change

Dissipation factor

Leakage current

Within 10 % of initial value

Initial specified limit

Shall not exceed 125 % of initial limit

MIL-STD-202, method 108

1000 h application 2/3 of rated voltage at 125 °C

Capacitance change

Dissipation factor

Leakage current

Within 10 % of initial value

Initial specified limit

Shall not exceed 125 % of initial limit

MIL-STD-202, method 106, 20 cycles

MIL-PRF-55365

Capacitance change

Dissipation factor

Leakage current

Within 15 % of initial value

Shall not exceed 150 % of initial limit

Shall not exceed 200 % of initial limit

Stability at low and

high temperatures

Delta cap limit at -55 °C, 85 °C is 10 % of initial value

Delta cap limit at 125 °C is 15 % of initial value

Delta cap at step 3 and final step 25 °C is 10 %

DCL at 85 °C: 10 x initial specified value

DCL at 125 °C: 12 x initial specified value

DCL at 25 °C: initial specified value at RV

Thermal shock

MIL-STD-202, method 107

At -55 °C / +125 °C, for 5 cycles,

30 min at each temperature

Capacitance change

Dissipation factor

Leakage current

Within 10 % of initial value

Initial specified limit

MECHANICAL PERFORMANCE CHARACTERISTICS

ITEM

CONDITION

POST TEST PERFORMANCE

Capacitance change Within 10 % of initial value

Terminal strength /

Shear force test

Apply a pressure load of 5 N for 10 s 1 s

horizontally to the center of capacitor side body Dissipation factor

Leakage current

Initial specified limit

There shall be no mechanical or visual damage to capacitors

post-conditioning.

Vibration

MIL-STD-202, method 204, condition D,

10 Hz to 2000 Hz, 20 g peak, 8 h, at rated voltage parts are used for shock (specified pulse) test.

Electrical measurements are not applicable, since the same

There shall be no mechanical or visual damage to capacitors

post-conditioning.

Shock

(specified pulse)

MIL-STD-202, method 213, condition I,

100 g peak

Capacitance change

Dissipation factor

Leakage current

Within 10 % of initial value

Initial specified limit

There shall be no mechanical or visual damage to capacitors

post-conditioning.

Resistance

to soldering heat

MIL-STD-202, method 210, condition J

(leadbearing capacitors) and K (lead (Pb)-free

capacitors), one heat cycle

Capacitance change

Dissipation factor

Leakage current

Within 10 % of initial value

Initial specified limit

Solderability

MIL-STD-202, method 208, ANSI/J-STD-002,

test B (leadbearing) and B1 (lead (Pb)-free).

Preconditioning per category C (category E -

optional).

Does not apply to gold terminations.

Lead (Pb)-free and leadbearing capacitors are

backward and forward compatible

Solder coating of all capacitors shall meet specified

requirements.

There shall be no mechanical or visual damage to capacitors

post-conditioning.

Resistance to

solvents

MIL-STD-202, method 215

There shall be no mechanical or visual damage to capacitors

post-conditioning. Body marking shall remain legible.

Flammability

Encapsulation materials meet UL 94 V-0 with an

oxygen index of 32 %

Revision: 12-Aug-2021

Document Number: 40209

3

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

1


型号：	T95R227K016HSSL
厂家：	VISHAY
描述：	CAP TANT 220UF 16V 10% 2824
文件：	总21页 (文件大小：293K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

T95R227K016HSSL [VISHAY]

相关型号：

T95R227K016HSSS

T95R227K016HZAL

T95R227K016HZAS

T95R227K016HZSL

T95R227K016HZSS

T95R227K016LSAL

T95R227K016LSAS

T95R227K016LSSL

T95R227K016LSSS

T95R227K016LZAL

T95R227K016LZAS

T95R227K016LZSL