T98E687M004CZS [VISHAY]

CAPACITOR, TANTALUM, SOLID, POLARIZED, 4 V, 680 uF, SURFACE MOUNT, 3018, CHIP, ROHS COMPLIANT;


型号：	T98E687M004CZS
厂家：	VISHAY
描述：	CAPACITOR, TANTALUM, SOLID, POLARIZED, 4 V, 680 uF, SURFACE MOUNT, 3018, CHIP, ROHS COMPLIANT 电容器
文件：	总4页 (文件大小：74K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

T98

Vishay Sprague

www.vishay.com

Solid TANTAMOUNT Low ESR, Hi-Rel COTS, Built in Fuse

Conformal Coated

FEATURES

• High

reliability design with reliability

screening available

• Surge current testing per MIL-PRF-55365

options available

• Ultra-low ESR

• Mounting: Surface mount

• Terminations: SnPb, standard. 100 % tin

available

• Circuit protection for mission or safety critcal systems

• Fuse characteristics: Guaranteed fuse protection at 9 A,

100 ms

• Compliant to RoHS Directive 2002/95/EC

Note

* Pb containing terminations are not RoHS compliant, exemptions

may apply

PERFORMANCE CHARACTERISTICS

www.vishay.com/doc?40088

Operating Temperature: - 55 °C to + 85 °C

(to + 125 °C with voltage derating)

Capacitance Range: 10 μF to 1500 μF

Capacitance Tolerance: 10 %, 20 % standard

Voltage Rating: 4 V_DCto 75 V_DC

ORDERING INFORMATION

T98

227

020

TYPE

CASE

CODE

CAPACITANCE

TOLERANCE

DC VOLTAGE

RATING AT + 85 °C

TERMINATION/

PACKAGING

(available options are

series dependent)

RELIABILITY

LEVEL

SURGE

CURRENT

See

This is expressed in

K = 10 %

M = 20 %

This is expressed

in volts. To

E = Sn/Pb solder/

7" (178 mm) reel

L = Sn/Pb solder/

7" (178 mm), 1/2 reel

C = 100 % tin/

S = 40 h

burn-in

Z = Non-

established

reliability

A = 10 cycles

at + 25 °C

B = 10 cycles

at - 55 °C/

+ 85 °C

S = 3 cycles

at 25 °C

Ratings picofarads. The first

and

Case

Codes

table

two digits are the

significant figures.

The third is the

number of zeros

to follow

complete the

three-digit block,

zeros precede the

voltage rating.

A decimal point is

indicated by an “R”

(6R3 = 6.3 V)

7" (178 mm), reel

H = 100 % tin/

7" (178 mm), 1/2 reel

DIMENSIONS in inches [millimeters]

Tantalum wire

nib identiﬁes anode (+) terminal

CASE CODE

0.099 max.

[2.5 max.]

f (REF.)

0.079

[2.0]

D (REF.)

0.256

[6.5]

J (MAX.)

0.004

[0.1]

0.299 0.012

[7.6 0.3]

0.181 0.016

[4.6 0.4]

0.087 [2.2]

max.

0.299 0.012

[7.6 0.3]

0.299 0.012

[7.6 0.3]

0.299 0.012

[7.6 0.3]

0.181 0.016

[4.6 0.4]

0.177 0.016

[4.5 0.4]

0.162 0.016

[4.1 0.4]

0.207 0.016

[5.3 0.4]

0.165 0.016

[4.2 0.4]

0.150 0.016

[3.8 0.4]

0.193 0.016

[4.9 0.4]

0.079

[2.0]

0.079

[2.0]

0.079

[2.0]

0.256

[6.5]

0.248

[6.3]

0.248

[6.3]

0.004

[0.1]

0.004

[0.1]

0.004

[0.1]

0.246 0.016/- 0.024

[6.2 0.4/- 0.6]

0.246 0.016

[6.2 0.4]

0.299 0.012

[7.6 0.3]

0.246 0.016

[6.2 0.4]

0.258 0.016

[6.6 0.4]

0.244 0.016

[6.2 0.4]

0.079

[2.0]

0.248

[6.3]

0.004

[0.1]

0.327 [8.3]

max.

0.315 0.012

[8.0 0.3]

0.268 0.016

[6.8 0.4]

0.268 0.016

[6.8 0.4]

0.161 0.016

[4.1 0.4]

0.224 0.016

[5.7 0.4]

0.150 0.016

[3.8 0.4]

0.213 0.016

[5.4 0.4]

0.079

[2.0]

0.079

[2.0]

0.248

[6.3]

0.264

[6.7]

0.004

[0.1]

0.004

[0.1]

Revision: 03-Feb-12

Document Number: 40119

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T98

Vishay Sprague

www.vishay.com

RATINGS AND CASE CODES

μF

4 V

6.3 V

10 V

16 V

20 V

25 V

35 V

50 V

63 V

75 V

100

150

220

330

470

680

1000

1500

2200

F/H ⁽¹⁾

E/R

Note

(1)

Preliminary rating. Contact factory for availability.

STANDARD RATINGS

MAX. DCL

AT + 25 °C

(μA)

MAX. DF

AT + 25 °C

120 Hz (%)

MAX. ESR

AT + 25 °C

100 kHz (m)

MAX. RIPPLE

100 kHz

CAPACITANCE

(μF)

CASE

CODE

PART NUMBER ⁽¹⁾

_RMS(A)

4 V_DCAT + 85 °C; 2.7 V_DCAT + 125 °C

470

680

1000

1500

T98V477(1)004(2)(3)(4)

18.8

27.2

40.0

60.0

130

125

120

118

115

1.0

1.3

1.5

T98E687(1)004(2)(3)(4)

T98E108(1)004(2)(3)(4)

T98R108(1)004(2)(3)(4)

T98R158(1)004(2)(3)(4)

6.3 V_DCAT + 85 °C; 4 V_DCAT + 125 °C

470

680

1000

T98E477(1)6R3(2)(3)(4)

T98E687(1)6R3(2)(3)(4)

T98R108(1)6R3(2)(3)(4)

29.6

42.8

63.0

130

125

120

1.3

1.4

10 V_DCAT + 85 °C; 7 V_DCAT + 125 °C

330

470

680

T98E337(1)010(2)(3)(4)

T98E477(1)010(2)(3)(4)

T98R687(1)010(2)(3)(4)

33.0

47.0

68.0

135

128

1.3

1.4

16 V_DCAT + 85 °C; 10 V_DCAT + 125 °C

220

T98E227(1)016(2)(3)(4)

35.2

160

1.2

20 V_DCAT + 85 °C; 13 V_DCAT + 125 °C

220

330

H ⁽¹⁾

T98R227(1)020(2)(3)(4)

T98F337(1)020(2)(3)(4)

T98H337(1)020(2)(3)(4)

44.0

66.0

180

200

1.2

1.1

1.2

25 V_DCAT + 85 °C; 17 V_DCAT + 125 °C

150

220

T98R686(1)025(2)(3)(4)

T98F157(1)025(2)(3)(4)

T98M227M025(2)(3)(4)

17.0

37.5

55.0

200

180

200

1.1

1.2

1.1

35 V_DCAT + 85 °C; 23 V_DCAT + 125 °C

T98R476(1)035(2)(3)(4)

50 V_DCAT + 85 °C; 33 V_DCAT + 125 °C

T98Z476(1)050(2)(3)(4)

16.5

200

245

350

600

1.1

1.0

0.8

0.6

23.5

63 V_DCAT + 85 °C; 42 V_DCAT + 125 °C

T98F226(1)063(2)(3)(4)

13.9

75 V_DCAT + 85 °C; 50 V_DCAT + 125 °C

T98R106(1)075(2)(3)(4)

7.5

Notes

•

Part number definitions:

(1) Capacitance tolerance: K, M

(2) Termination and packaging: C, E, H, L

(3) Reliability level: S, Z

(4) Surge current: A, B, S

Contact factory for availability

(1)

Revision: 03-Feb-12

Document Number: 40119

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

T98

Vishay Sprague

www.vishay.com

RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C)

STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS

Capacitor Voltage Rating

Operating Voltage

4.0

2.5

3.6

6.0

6.3

37.8

SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS

Capacitor Voltage Rating

Operating Voltage

4.0

6.3

2.5

3.3

5.0

8.0

POWER DISSIPATION

CASE CODE

MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR

0.140

0.215

0.250

0.265

0.250

0.265

STANDARD PACKAGING QUANTITY

UNITS PER REEL

CASE CODE

7" FULL REEL

7" HALF REEL

TBD

300

250

150

200

TBD

150

125

100

PRODUCT INFORMATION

Conformal Coated Guide

Moisture Sensitivity

www.vishay.com/doc?40150

www.vishay.com/doc?40135

SELECTOR GUIDES

Solid Tantalum Selector Guide

Solid Tantalum Chip Capacitors

FAQ

www.vishay.com/doc?49053

www.vishay.com/doc?40091

Frequently Asked Questions

www.vishay.com/doc?40110

Revision: 03-Feb-12

Document Number: 40119

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Revision: 12-Mar-12

Document Number: 91000

相关型号：