TCT06030C1102X4K700 [VISHAY]
RES,SMT,METAL FILM,11K OHMS,75WV,-50,50PPM TC,0603 CASE;
| 型号： | TCT06030C1102X4K700 |
| 厂家： | 
VISHAY |
| 描述： | RES,SMT,METAL FILM,11K OHMS,75WV,-50,50PPM TC,0603 CASE |
| 文件： | 总9页 (文件大小：134K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TCT 0603, TCU 0805, TCA 1206
Vishay Beyschlag
Trimmable Flat Chip Resistors
FEATURES
• Designed for state of the art laser trimming
• Enables economical functional circuit adjustment
• Low TCR 50 ppm/K available
• Excellent stability ≤ 0.25 % (1000 h rated power at 70 °C)
• Wide ohmic range: 10 Ω to 1 MΩ
• Lead (Pb)-free solder contacts
• Compliant to RoHS directive 2002/95/EC
TCT 0603, TCU 0805 and TCA 1206 trimmable flat chip
resistors are best suited whenever stable circuit adjustment
is required and potentiometers will be either too expensive,
too unstable or too large. The trimming is done directly on the
printed-circuit board (PCB) using a state of the art laser
trimming system e.g. with YAG or CO2 laser source. Typical
applications include any type of electronic sensors,
oscillators or electronic circuits which have to be trimmed to
certain functional parameters after PCB assembly.
APPLICATIONS
• Electronic sensors
• Oscillators
• Electronic circuits
METRIC SIZE
INCH:
0603
0805
1206
METRIC:
RR 1608M
RR 2012M
RR 3216M
TECHNICAL SPECIFICATIONS
TCT 0603
TCU 0805
TCA 1206
DESCRIPTION
Metric size
RR 1608M
RR 2012M
RR 3216M
10 Ω to 1 MΩ
+ 0/- 20 %
100 ppm/K
Standard
Resistance range
Resistance tolerance
Temperature coefficient
Operation mode
10 Ω to 1 MΩ
10 Ω to 1 MΩ
+ 0/- 30 %; + 0/- 20 %; + 0/- 10 %
100 ppm/K; 50 ppm/K
Standard
55/125/56
0.1 W
Power
Standard
55/125/56
0.125 W
Power
55/155/56
0.2 W
Climatic category
(LCT/UCT/days)
55/155/56
0.125 W
55/125/56
(1)
Rated dissipation, P70
Operating voltage, Umax. AC/DC
Film temperature
0.25 W
200 V
75 V
150 V
125 °C
155 °C
125 °C
155 °C
125 °C
Max. resistance change at P70
for resistance range,
|ΔR/R| max., after:
10 Ω to 1 MΩ
≤ 0.25 %
10 Ω to 1 MΩ
≤ 0.25 %
10 Ω to 1 MΩ
1000 h
8000 h
≤ 0.5 %
≤ 1.0 %
-
≤ 0.5 %
≤ 1.0 %
-
≤ 0.25 %
≤ 0.5 %
≤ 1.5 %
≤ 0.5 %
≤ 1.5 %
≤ 0.5 %
≤ 1.5 %
225 000 h
Insulation voltage:
1 min; Uins
100 V
75 V
200 V
75 V
300 V
75 V
Continuous
Failure rate: FITobserved
≤ 0.1 x 10-9/h
Notes
(1)
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded.
All given figures are valid for the untrimmed resistor
(2)
•
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
www.vishay.com
178
For technical questions, contact: thinfilmchip@vishay.com
Document Number: 28711
Revision: 23-Nov-09
TCT 0603, TCU 0805, TCA 1206
Trimmable Flat Chip Resistors
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER: TCT06030C4702XP500
T
C
T
0
6
0
3
0
C
4
7
0
2
X
P
5
0
0
PACKAGING
MODEL/SIZE SPECIAL CHARACTER
TCR
VALUE
TOLERANCE
SPECIAL
TCT0603
TCU0805
TCA1206
0 = Neutral
C = 50 ppm/K
B = 100 ppm/K
3 digit value
1 digit multiplier
MULTIPLIER
9 = *10-1
W = + 0/- 30 %
X = + 0/- 20 %
Y = + 0/- 10 %
P5
PW
Up to 2 digits
00 = Standard
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
5 = *105
PRODUCT DESCRIPTION: TCT 0603 - 50 - 20 % P5 47K
TCT
0603
- 50
- 20 %
P5
47K
TCR (2)
TOLERANCE
RESISTANCE VALUE
PACKAGING
MODEL
SIZE
TCT
TCU
TCA
0603
0805
1206
50 ppm/K
100 ppm/K
- 10 % = + 0/- 10 %
- 20 % = + 0/- 20 %
- 30 % = + 0/- 30 %
P5
PW
47K = 47 kΩ
1M = 1 MΩ
Notes
(1) Products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER
(2) A temperature coefficient 100 ppm/K is marked -00
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
RESISTANCE VALUE (3)
DESCRIPTION
TCR
TOLERANCE
TCT 0603
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
100 Ω to 1 MΩ
100 Ω to 1 MΩ
100 Ω to 1 MΩ
TCU 0805
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
100 Ω to 1 MΩ
100 Ω to 1 MΩ
100 Ω to 1 MΩ
TCA 1206
+ 0/- 30 %
+ 0/- 20 %
+ 0/- 10 %
+ 0/- 30 %
+ 0/- 20 %
+ 0/- 10 %
−
100 ppm/K
10 Ω to 1 MΩ
−
−
−
−
50 ppm/K
Note
(3) Resistance values to be selected from E12 (preferred) or E24 series
Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.
PACKAGING
REEL
MODEL
PIECES/PAPER TAPE ON REEL
CODE
P5
5000
20 000
5000
TCT 0603
PW
P5
TCU 0805
TCA 1206
20 000
5000
PW
P5
Document Number: 28711
Revision: 23-Nov-09
For technical questions, contact: thinfilmchip@vishay.com
www.vishay.com
179
TCT 0603, TCU 0805, TCA 1206
Trimmable Flat Chip Resistors
Vishay Beyschlag
DIMENSIONS
T1
WT
W
H
T2
L
DIMENSIONS AND MASS
H
L
W
(mm)
WT
(mm)
T1
(mm)
T2
(mm)
MASS
(mg)
TYPE
(mm)
(mm)
TCT 0603
TCU 0805
TCA 1206
0.45 + 0.1/- 0.05
0.45 + 0.1/- 0.05
1.55 0.05
2.0 0.1
0.85 0.1
1.25 0.15
1.6 0.15
> 75 % of W
> 75 % of W
> 75 % of W
0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2
1.9
4.6
9.2
0.4 + 0.1/- 0.2
0.5 0.25
0.4 + 0.1/- 0.2
0.5 0.25
0.45 + 0.1/- 0.05 3.2 + 0.1/- 0.2
SOLDER PAD DIMENSIONS
X
G
Y
Z
RECOMMENDED SOLDER PAD DIMENSIONS
WAVE SOLDERING
REFLOW SOLDERING
TYPE
G
Y
X
Z
G
Y
X
Z
(mm)
(mm)
(mm)
(mm)
2.75
3.30
4.40
(mm)
(mm)
(mm)
(mm)
TCT 0603
TCU 0805
TCA 1206
0.55
0.80
1.40
1.10
1.25
1.50
1.10
1.50
1.90
0.65
0.90
1.50
0.70
0.90
1.15
0.95
1.40
1.75
2.05
2.70
3.80
Note
• The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of
power dissipation may raise the temperature of the solder joint, hence special solder alloys or board materials may be required to maintain the
reliability of the assembly.
Specified power rating above 125 °C requires dedicated heat-sink pads, which depend on board materials.
The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in
publication IPC-7351. They do not guarantee any supposed thermal properties, particularly as these are also strongly influenced by many other
parameters.
Still, the given solder pad dimensions will be found adequate for most general applications, e.g. those referring to “standard operation mode”.
Please note however that applications for “power operation mode” require special considerations for the design of solder pads and adjacent
conductor areas.
www.vishay.com
180
For technical questions, contact: thinfilmchip@vishay.com
Document Number: 28711
Revision: 23-Nov-09
TCT 0603, TCU 0805, TCA 1206
Trimmable Flat Chip Resistors
Vishay Beyschlag
DESCRIPTION
The resistors are RoHS compliant; the pure tin plating
provides
compatibility
with
lead
(Pb)-free
and
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility. A newly
developed cermet layer is deposited onto a high-grade
(Al2O3) ceramic substrate and conditioned to achieve the
desired temperature coefficient. Pre-contacts are built on
both sides of the substrate. The resistor elements are
covered by glass for superior electrical, mechanical and
climatic protection. The terminations receive a final pure
tin-on-nickel plating.
lead-containing soldering processes. Solderability is
specified for 2 years after production or requalification. The
permitted storage time is 20 years. The immunity of the
plating against tin whisker growth has been proven under
extensive testing.
(1)
All products comply with the GADSL
and the
(2)
CEFIC-EECA-EICTA
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual chip resistors. Only accepted products are laid
directly into the paper tape in accordance with
• 2000/53/EC End of Vehicle life Directive (ELV) and
Annex II (ELV II)
• 2002/95/EC Restriction of the use of Hazardous
Substances directive (RoHS)
IEC 60286-3 (3)
.
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic soldering
using wave, reflow or vapour phase as shown in
IEC 61760-1 (3). The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system.
APPROVALS
The resistors are tested in accordance with EN 140401-802
which refers to EN 60115-1 and EN 140400. The detail
specification refers to the climatic category 55/125/56, which
relates to the “Standard operation mode” of this datasheet.
Vishay BEYSCHLAG has achieved “Approval of
Manufacturer” in accordance with EN 100114-1.
Notes
(1)
Global Automotive Declarable Substance List, see www.gadsl.org
(2)
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see www.eicta.org/index.php?id=995
→ issue → environment policy → chemicals → chemicals for electronics
(3)
The quoted IEC standards marked with an asterisk (*) are also released as EN standards with the same number and identical contents
Document Number: 28711
Revision: 23-Nov-09
For technical questions, contact: thinfilmchip@vishay.com
www.vishay.com
181
TCT 0603, TCU 0805, TCA 1206
Trimmable Flat Chip Resistors
Vishay Beyschlag
FUNCTIONAL PERFORMANCE
P
TCA 1206
TCU 0805
TCT 0603
0.2
W
0.1
0
50
- 50
0
100
150
°C
70
Ambient Temperature ϑamb
Derating - Standard Operation
P
TCU 0805
TCT 0603
0.2
W
0.1
0
50
- 50
0
100
150
°C
70
Ambient Temperature ϑamb
Derating - Power Operation
Ltrim
T
Pre-contact,
hidden
Usable trimming area
Tinned contact,
electroplated, visible
L
Permissible Trimming Area
DIMENSIONS OF THE PERMISSIBLE TRIMMING AREA IN MILLIMETERS
TYPE
L
W
T
Ltrim
0.5
Wtrim
0.5
TCT 0603
TCU 0805
TCA 1206
1.6
2.0
3.2
0.8
1.2
1.6
0.3
0.3
0.4
0.8
0.8
1.4
1.0
www.vishay.com
182
For technical questions, contact: thinfilmchip@vishay.com
Document Number: 28711
Revision: 23-Nov-09
TCT 0603, TCU 0805, TCA 1206
Trimmable Flat Chip Resistors
Vishay Beyschlag
TESTS AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
category temperature; damp heat, long term, 56 days) is
valid.
EN 60115-1, generic specification (includes tests)
EN 140400, sectional specification (includes schedule for
qualification approval)
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
EN 140401-802, detail specification (includes schedule for
conformance inspection)
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
The components are mounted for testing on boards in
accordance with EN 60115-1, 4.31 unless otherwise
specified.
The components are approved in accordance with the
European CECC-system, where applicable. The following
table contains only the most important tests. For the full test
schedule refer to the documents listed above. The testing
also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
The requirements stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-802. However, some
additional tests and a number of improvements against those
minimum requirements have been included.
The tests are carried out in accordance with IEC 60068 and
under standard atmospheric conditions in accordance with
IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated
temperature range: Lower category temperature, upper
TEST PROCEDURES AND REQUIREMENTS (1)
EN
IEC
REQUIREMENTS
60115-1 60068-2 TEST
TEST
PROCEDURE
PERMISSIBLE CHANGE
CLAUSE
METHOD
(ΔR)
Stability for product types:
TCT 0603
TCU 0805
TCA 1206
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
+ 0/- 30 % R;
+ 0/- 20 % R;
+ 0/- 10 % R
4.5
-
-
Resistance
Temperature
coefficient
At (20/- 55/20) °C and
(20/125/20) °C
100 ppm/K;
50 ppm/K
4.8.4.2
U = P70 x R or U = Umax.
;
whichever is the less severe;
1.5 h on; 0.5 h off;
Endurance at 70 °C:
Standard operation mode
-
70 °C; 1000 h
70 °C; 8000 h
(0.25 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
4.25.1
U = P70 x R or U = Umax.
;
whichever is the less severe;
1.5 h on; 0.5 h off;
Endurance at 70 °C:
Power operation mode
-
70 °C; 1000 h
70 °C; 8000 h
125 °C; 1000 h
155 °C; 1000 h
(0.5 % R + 0.05 Ω)
(1 % R + 0.05 Ω)
(0.25 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
Endurance at upper category
temperature
4.25.3
−
Document Number: 28711
Revision: 23-Nov-09
For technical questions, contact: thinfilmchip@vishay.com
www.vishay.com
183
TCT 0603, TCU 0805, TCA 1206
Trimmable Flat Chip Resistors
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS (1)
EN
IEC
REQUIREMENTS
PERMISSIBLE CHANGE
(ΔR)
60115-1 60068-2 TEST
CLAUSE
TEST
PROCEDURE
METHOD
Stability for product types:
TCT 0603
TCU 0805
TCA 1206
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
(40 2) °C;
56 days;
(93 3) % RH
Damp heat,
steady state
4.24
78 (Cab)
(0.25 % R + 0.05 Ω)
4.23
Climatic sequence:
dry heat
4.23.2
2 (Ba)
30 (Db)
1 (Aa)
13 (M)
UCT; 16 h
55 °C; 24 h;
> 90 % RH;
1 cycle
4.23.3
4.23.4
4.23.5
damp heat, cyclic
cold
LCT; 2 h
8.5 kPa;
2 h;
25 10 °C
low air pressure
55 °C; 5 days;
> 95 % to 100 % RH;
5 cycles
4.23.6
-
30 (Db)
1 (Aa)
damp heat, cyclic
Cold
(0.25 % R + 0.05 Ω)
(0.25 % R + 0.05 Ω)
LCT = - 55 °C;
UCT = 125 °C
- 55 °C; 2 h
30 min at LCT and 30 min at UCT;
LCT = - 55 °C;
(0.25 % R + 0.05 Ω)
no visible damage
UCT = 125 °C;
5 cycles
4.19
14 (Na)
Rapid change of temperature
LCT = - 55 °C;
UCT = 125 °C;
1000 cycles
(0.5 % R + 0.05 Ω)
no visible damage
Short time overload;
standard operation mode
U = 2.5 x P70 x R or
(0.25 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
U = 2 x Umax.
;
4.13
4.22
-
whichever is the less severe;
5 s
Short time overload;
power operation mode
Endurance by sweeping;
10 Hz to 2000 Hz;
no resonance;
amplitude ≤ 1.5 mm or ≤ 200 m/s2; 6 h
(0.25 % R + 0.05 Ω);
no visible damage
6 (Fc)
Vibration
Solder bath method;
SnPb40;
non-activated flux
(215 3) °C; (3 0.3) s
Good tinning
(≥ 95 % covered);
no visible damage
4.17.2
58 (Td)
Solderability
Solder bath method;
SnAg3Cu0.5 or SnAg3.5;
non-activated flux
(235 3) °C; (2 0.2) s
Resistance to
soldering heat
Solder bath method;
(260 5) °C; (10 1) s
(0.25 % R + 0.05 Ω);
no visible damage
4.18.2
4.29
58 (Td)
45 (XA)
Component solvent
resistance
Isopropyl alcohol + 50 °C;
No visible damage
method 2
www.vishay.com
184
For technical questions, contact: thinfilmchip@vishay.com
Document Number: 28711
Revision: 23-Nov-09
TCT 0603, TCU 0805, TCA 1206
Trimmable Flat Chip Resistors
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS (1)
EN
IEC
REQUIREMENTS
PERMISSIBLE CHANGE
(ΔR)
60115-1 60068-2 TEST
CLAUSE
TEST
PROCEDURE
METHOD
Stability for product types:
TCT 0603
TCU 0805
TCA 1206
10 Ω to 1 MΩ
10 Ω to 1 MΩ
10 Ω to 1 MΩ
RR 1608M; 9 N
4.32
4.33
21 (Ue3)
21 (Ue1)
Shear (adhesion)
Substrate bending
No visible damage
RR 2012M and RR 3216M; 45 N
(0.25 % R + 0.05 Ω)
no visible damage,
no open circuit in bent position
Depth 2 mm,
3 times
4.7
-
-
Voltage proof
Flammability
URMS = Uins; (60 5) s
No flashover or breakdown
No burning after 30 s
4.35
IEC 60695-2-2, needle flame test; 10 s
Note
(1) All given figures are valid for the untrimmed resistor
12NC INFORMATION FOR HISTORICAL CODING REFERENCE ONLY
• The resistors have a 12 digit numeric code starting with
Last digit of 12NC indicating resistance decade
2312.
RESISTANCE DECADE
10 Ω to 99.9 Ω
LAST DIGIT
• The subsequent 4 digits indicate the resistor type,
specification and packaging; see the 12NC table.
• The remaining 4 digits indicate the resistance value:
- The first 3 digits indicate the resistance value.
- The last digit indicates the resistance decade. in
accordance with the 12NC indicating resistance decade
9
1
2
3
4
5
100 Ω to 999 Ω
1 kΩ to 9.99 kΩ
10 kΩ to 99.9 kΩ
100 kΩ to 999 kΩ
1 MΩ to 9.99 MΩ
table
.
12NC example
The 12NC of a TCT 0603 resistor, value 47 kΩ and TCR 50
with + 0/- 20 % tolerance, supplied in cardboard tape of
5000 units per reel is: 2312 300 64703.
12NC - Resistor type and packaging
CODE 2312 ... .....
CARDBOARD TAPE ON REEL
PW
DESCRIPTION
P5
TYPE
TCR
TOL.
5000 UNITS
300 1....
300 2....
300 3....
300 5....
300 6....
300 7....
320 1....
320 2....
320 3....
320 5....
320 6....
320 7....
340 2....
20 000 UNITS
305 1....
305 2....
305 3....
305 5....
305 6....
305 7....
325 1....
325 2....
325 3....
325 5....
325 6....
325 7....
345 2....
+ 0/- 30 %
+ 0/- 20 %
+ 0/- 10 %
+ 0/- 30 %
+ 0/- 20 %
+ 0/- 10 %
+ 0/- 30 %
+ 0/- 20 %
+ 0/- 10 %
+ 0/- 30 %
+ 0/- 20 %
+ 0/- 10 %
+ 0/- 20 %
100 ppm/K
TCT 0603
50 ppm/K
100 ppm/K
TCU 0805
TCA 1206
50 ppm/K
100 ppm/K
Document Number: 28711
Revision: 23-Nov-09
For technical questions, contact: thinfilmchip@vishay.com
www.vishay.com
185
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明