TFDU4301-TR3 [VISHAY]
Infrared Transceiver Module (SIR, 115.2 kbit/s) for IrDA® Applications; 红外收发器模块( SIR , 115.2千比特/秒)的IrDA®应用型号: | TFDU4301-TR3 |
厂家: | VISHAY |
描述: | Infrared Transceiver Module (SIR, 115.2 kbit/s) for IrDA® Applications |
文件: | 总12页 (文件大小:207K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TFDU4301
Vishay Semiconductors
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
FEATURES
• Compliant to the latest IrDA physical layer
specification (9.6 kbit/s to 115.2 kbit/s) and TV
remote control, bi-directional operation included
• Operates from 2.4 V to 5.5 V within specification
over full temperature range from - 30 °C to
+ 85 °C
• Split power supply, transmitter and receiver can
be operated from two power supplies with
relaxed requirements saving costs, US patent
no. 6.157.476
20101
DESCRIPTION
The TFDU4301 is a low profile (2.5 mm) infrared transceiver
module. It is compliant to the latest IrDA® physical layer
standard for fast infrared data communication, supporting
IrDA speeds up to 115.2 kbit/s (SIR) and carrier based
remote control. The transceiver module consists of a PIN
photodiode, an infrared emitter (IRED), and a low-power
control IC to provide a total front-end solution in a single
package.
This device covers an extended IrDA low power range of
close to 1 m. With an external current control resistor the
current can be adjusted for shorter ranges.
The RXD output pulse width is independent of the optical
input pulse width and stays always at a fixed pulse width thus
making the device optimum for standard endecs. TFDU4301
has a tri-state output and is floating in shut-down mode with
a weak pull-up.
• Extended IrDA low power range to about 70 cm
• Typical remote control range 12 m
• Low power consumption (< typ. supply current 70 µA)
• Power shutdown mode (< 1 µA shutdown current in full
temperature range, up to 85 °C)
• Low profile (2.5 mm) (L x W x H in mm): 8.5 × 2.5 × 3.1
• Surface mount package
• High efficiency emitter
• Low profile (universal) package capable of surface mount
soldering to side and top view orientation
• Directly interfaces with various super I/O and controller
devices as e.g. TOIM4232 or TOIM5232
• Tri-state-receiver output, floating in shut down with a weak
pull-up
APPLICATIONS
• Compliant with IrDA background light specification
• EMI immunity in GSM bands > 300 V/m verified
• Qualified for lead (Pb)-free and Sn/Pb processing (MSL4)
• Ideal for battery operated applications
• Telecommunication products (cellular phones, pagers)
• Digital still and video cameras
• Printers, fax machines, photocopiers, screen projectors
• Medical and industrial data collection
• Diagnostic systems
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Notebook computers, desktop PCs, palmtop computers
(Win CE, Palm PC), PDAs
• Internet TV boxes, video conferencing systems
• External infrared adapters (dongles)
• Data loggers
• GPS
• Kiosks, POS, point and pay devices including
IrFM - applications
PRODUCT SUMMARY
DIMENSIONS
H x L x W
(mm x mm x mm)
OPERATING
VOLTAGE
(V)
IDLE SUPPLY
CURRENT
(mA)
DATA RATE
(kbit/s)
LINK DISTANCE
(m)
PART NUMBER
TFDU4301
115.2
3.1 x 8.5 x 2.5
0 to ≥ 0.7
2.4 to 5.5
0.07
PARTS TABLE
PART
DESCRIPTION
QTY/REEL
TFDU4301-TR1
TFDU4301-TR3
TFDU4301-TT1
TFDU4301-TT3
Oriented in carrier tape for side view surface mounting
Oriented in carrier tape for side view surface mounting
Oriented in carrier tape for top view surface mounting
Oriented in carrier tape for top view surface mounting
750 pcs
2500 pcs
750 pcs
2500 pcs
Document Number: 81965
Rev. 1.0, 22-Apr-10
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
www.vishay.com
1
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
FUNCTIONAL BLOCK DIAGRAM
VCC1
Push-pull
driver
RXD
VCC2
Comparator
Amplifier
Logic
and
control
Controlled driver
SD
TXD
REDC
GND
18282
PIN DESCRIPTION
PIN NUMBER
FUNCTION
DESCRIPTION
I/O
ACTIVE
Connect IRED anode directly to the power supply (VCC2). IRED current can be
decreased by adding a resistor in series between the power supply and IRED
anode. A separate unregulated power supply can be used at this pin.
VCC2
IRED anode
1
2
IRED cathode
IRED cathode, internally connected to the driver transistor.
This Schmitt-Trigger input is used to transmit serial data when SD is low. An
on-chip protection circuit disables the LED driver if the TXD pin is asserted for
longer than 100 µs. The input threshold voltage adapts to and follows the logic
voltage swing defined by the applied supply voltage.
3
TXD
I
High
Received data output, push-pull CMOS driver output capable of driving
standard CMOS or TTL loads. During transmission the RXD output is active
and mirrors the transmit signal. No external pull-up or pull-down resistor is
required. Floating with a weak pull-up of 500 kΩ (typ.) in shutdown mode. The
voltage swing is defined by the applied supply voltage.
4
5
RXD
SD
O
Low
Shutdown. The input threshold voltage adapts to and follows the logic voltage
swing defined by the applied supply voltage.
I
I
High
6
7
8
VCC1
NC
Supply voltage
Not connected
Ground
GND
Definitions:
PINOUT
In the Vishay transceiver data sheets the following
nomenclature is used for defining the IrDA operating modes:
SIR: 2.4 kbit/s to 115.2 kbit/s, equivalent to the basic serial
infrared standard with the physical layer version IrPhy 1.0
MIR: 576 kbit/s to 1152 kbit/s
TFDU4301
weight 75 mg
FIR: 4 Mbit/s
VFIR: 16 Mbit/s
MIR and FIR were implemented with IrPhy 1.1, followed by
IrPhy 1.2, adding the SIR low power standard. IrPhy 1.3
extended the low power option to MIR and FIR and VFIR was
added with IrPhy 1.4. A new version of the standard in any
case obsoletes the former version.
5
6
1
2
3
4
8
7
IRED A IRED C TXD RXD SD Vcc NC GND
18101-1
With introducing the updated versions the old versions are
obsolete. Therefore the only valid IrDA standard is the actual
version IrPhy 1.4 (in Oct. 2002).
www.vishay.com
2
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
Document Number: 81965
Rev. 1.0, 22-Apr-10
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITIONS
SYMBOL
VCC1
MIN.
- 0.5
- 0.5
- 0.5
- 0.5
TYP.
MAX.
+ 6
UNIT
V
Supply voltage range, transceiver
Supply voltage range, transmitter
RXD output voltage
- 0.3 V < VCC2 < 6 V
- 0.5 V < VCC1 < 6 V
VCC2
+ 6
V
- 0.5 V < VCC1 < 6 V
VRXD
VIN
VCC1 + 0.5
+ 6
V
Voltage at all inputs
Input current
Note: Vin ≥ VCC1 is allowed
For all pins, except IRED anode pin
V
10
mA
mA
mW
°C
Output sinking current
Power dissipation
25
See derating curve
PD
TJ
250
Junction temperature
125
Ambient temperature range
(operating)
Tamb
Tstg
- 30
- 40
+ 85
°C
Storage temperature range
Soldering temperature
+ 100
260
85
°C
°C
See recommended solder profile
t < 90 µs, ton < 20 %
Average output current, pin 1
IIRED(DC)
IIRED(RP)
VESD
mA
Repetitive pulsed output current,
pin 1 to pin 2
430
mA
ESD protection
Latchup
1
kV
|
100|
mA
Note
Reference point ground (pin 8) unless otherwise noted.
Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
We apologize to use sometimes in our documentation the abbreviation LED and the word light emitting diode instead of infrared emitting diode
(IRED) for IR-emitters. That is by definition wrong; we are here following just a bad trend.
Typical values are for design aid only, not guaranteed nor subject to production testing and may vary with time.
EYE SAFETY INFORMATION
STANDARD
CLASSIFICATION
Class 1
IEC/EN 60825-1 (2007-03), DIN EN 60825-1 (2008-05) “SAFETY OF LASER PRODUCTS -
Part 1: equipment classification and requirements”, simplified method
IEC 62471 (2006), CIE S009 (2002) “Photobiological Safety of Lamps and Lamp Systems”
Exempt
DIRECTIVE 2006/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5th April 2006 on the
minimum health and safety requirements regarding the exposure of workers to risks arising from physical agents
(artificial optical radiation) (19th individual directive within the meaning of article 16(1) of directive 89/391/EEC)
Exempt
Note
Vishay transceivers operating inside the absolute maximum ratings are classified as eye safe according the above table.
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITIONS
SYMBOL
MIN.
TYP.
MAX.
UNIT
TRANSCEIVER
Supply voltage
VCC1
TA
2.4
- 30
9.6
5.5
+ 85
115.2
V
Operating temperature range
Data rates
°C
kbit/s
SD = low,
amb = - 25 °C to + 85 °C independent
T
ICC1
40
40
70
150
µA
of ambient light,
CC1 = VCC2 = 2.4 V to 5.5 V
Idle supply current at VCC1
(receive mode, no signal)
V
V
SD = low, Tamb = 25 °C,
CC1 = VCC2 = 2.4 V to 5.5 V
ICC1
ICC1
70
100
2
µA
Average dynamic supply
current, transmitting
I
IRED = 300 mA, 20 % duty cycle
0.6
mA
SD = high,
Standby (SD) (1) supply current Tamb = - 25 °C to + 85 °C independent
of ambient light
ISD
0.01
500
1
µA
RXD to VCC1 impedance
RRXD
400
600
kΩ
Document Number: 81965
Rev. 1.0, 22-Apr-10
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
www.vishay.com
3
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITIONS
SYMBOL
MIN.
TYP.
MAX.
UNIT
TRANSCEIVER
Input voltage low (TXD, SD)
Input voltage high (SD)
Input voltage high (TXD)
Timing logic decision level
Input leakage current low
Input leakage current high
Input capacitance (TXD, SD)
Output voltage low, RXD
Output voltage high, RXD
VILo
VIHi
VIHi
- 0.3
0.4
6
V
V
V
For compliance with ISD spec.
VCC1 - 0.3
VCC1 - 0.5
6
0.5 x VCC1
0.01
VILo ≤ 0.3 V
IILo
IIHi
10
10
µA
µA
pF
V
VIHi ≥ VCC1 - 0.3 V
0.01
CIN
5
C
load = 8 pF, IOLo ≤ |+ 500 µA|
OH = - 200 µA
VOLo
VOHi
0.4
VCC1
I
0.8 x VCC1
V
Note
Tested at Tamb = 25 °C, VCC1 = VCC2 = 2.4 V to 5.5 V unless otherwise noted.
Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
(1) SD mode becomes active when SD is set high for more than 0.2 µs. In SD mode the detector is disabled and the output disconnected.
OPTOELECTRONIC CHARACTERISTICS (1)
PARAMETER
TEST CONDITIONS
SYMBOL
MIN.
TYP.
MAX.
UNIT
RECEIVER
Minimum irradiance Ee in
angular range (3)
9.6 kbit/s to 115.2 kbit/s
λ = 850 nm to 900 nm; α = 0°, 15°
40
(4)
80
(8)
mW/m2
Ee
Ee
(µW/cm2)
Maximum irradiance Ee In
Angular Range (4)
5
kW/m2
λ = 850 nm to 900 nm
(500)
(mW/cm2)
λ = 850 nm to 900 nm
Maximum no detection
irradiance (2)
tr, tf < 40 ns,
4
(0.4)
mW/m2
Ee
t
po = 1.6 µs at f = 115 kHz,
no output signal allowed
(µW/cm2)
Rise time of output signal
Fall time of output signal
10 % to 90 %, CL = 8 pF
90 % to 10 %, CL = 8 pF
tr(RXD)
tf(RXD)
tPW
10
10
30
30
80
80
3
ns
ns
µs
RXD pulse width of output signal
Input pulse length > 1.2 µs
1.7
2.2
Input irradiance = 100 mW/m2,
Stochastic jitter, leading edge
350
ns
≤ 115.2 kbit/s
Standby/shutdown delay,
receiver startup time
After shutdown active or power-on
500
150
µs
µs
Latency
tL
50
TRANSMITTER
IRED operating current limitation No external resistor for current limitation (5)
ID
Vf
200
1.4
- 1
300
1.8
430
1.9
1
mA
V
Forward voltage of built-in IRED
Output leakage IRED current
If = 300 mA
TXD = 0 V, 0 < VCC1 < 5.5 V
IIRED
0.01
µA
α = 0°, 15°
Ie
Ie
α
30
65
370
mW/sr
mW/sr
°
TXD = high, SD = low
V
CC1 = 5 V, α = 0°, 15°
Output radiant intensity
TXD = low or SD = high
(receiver is inactive as long as
SD = high)
0.04
Output radiant intensity, angle of
half intensity
Peak - emission wavelength (6)
24
45
λp
880
900
nm
nm
Spectral bandwidth
Δλ
www.vishay.com
4
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
Document Number: 81965
Rev. 1.0, 22-Apr-10
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
OPTOELECTRONIC CHARACTERISTICS (1)
PARAMETER
TEST CONDITIONS
SYMBOL
MIN.
TYP.
50
MAX.
UNIT
TRANSMITTER
Optical rise time, fall time
tropt, tfopt
10
tTXD - 0.15
23
300
tTXD + 0.15
100
ns
µs
µs
%
Input pulse width 1.6 < tTXD < 23 µs
topt
Optical output pulse duration
Optical overshoot
Input pulse width tTXD ≥ 23 µs
topt
50
25
Note
(1)
Tested at Tamb = 25 °C, VCC1 = VCC2 = 2.4 V to 5.5 V unless otherwise noted.
Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
Equivalent to IrDA background light and electromagnetic field test: fluorescent lighting immunity.
(2)
(3)
IrDA sensitivity definition: minimum irradiance Ee in angular range, power per unit area. The receiver must meet the BER specification while
the source is operating at the minimum intensity in angular range into the minimum half-angular range at the maximum link length.
Maximum irradiance Ee in angular range, power per unit area. The optical delivered to the detector by a source operating at the maximum
intensity in angular range at minimum link length must not cause receiver overdrive distortion and possible ralated link errors. If placed at the
active output interface reference plane of the transmitter, the receiver must meet its bit error ratio (BER). For more definitions see the
document “Symbols and Terminology” on the Vishay website.
(4)
(5)
(6)
Using an external current limiting resistor is allowed and recommended to reduce IRED intensity and operating current when current reduction
is intended to operate at the IrDA low power conditions. E.g. for VCC2 = 3.3 V a current limiting resistor of RS = 56 Ω will allow a power
minimized operation at IrDA low power conditions.
Due to this wavelength restriction compared to the IrDA spec of 850 nm to 900 nm the transmitter is able to operate as source for the standard
remote control applications with codes as e.g. Phillips RC5/RC6® or RECS 80.
RECOMMENDED CIRCUIT DIAGRAM
TABLE 1 - RECOMMENDED APPLICATION
CIRCUIT COMPONENTS
Operated with a clean low impedance power supply the
TFDU4301 needs no additional external components.
However, depending on the entire system design and board
layout, additional components may be required (see figure 1).
RECOMMENDED
COMPONENT
VISHAY PART NUMBER
VALUE
C1
C2
4.7 µF, 16 V
0.1 µF, ceramic
293D 475X9 016B
VJ 1206 Y 104 J XXMT
VIRED
VCC
V
CC2, IRED A
R1*)
R2
Depends on current
to be adjusted
R1
R2
VCC1
C1
47 Ω, 0.125 W
CRCW-1206-47R0-F-RT1
C2
Ground
SD
GND
SD
The inputs (TXD, SD) and the output RXD should be directly
connected (DC - coupled) to the I/O circuit. The capacitor C2
combined with the resistor R2 is the low pass filter for
smoothing the supply voltage. R2, C1 and C2 are optional
TXD
TXD
RXD
RXD
and dependent on the quality of the supply voltages VCC
1
IRED C
19295-1
and injected noise. An unstable power supply with dropping
voltage during transmision may reduce the sensitivity (and
transmission range) of the transceiver.
The placement of these parts is critical. It is strongly
recommended to position C2 as close as possible to the
transceiver pins.
When extended wiring is used as in bench tests the
inductance of the power supply can cause dynamically a
voltage drop at VCC2. Often some power supplies are not
able to follow the fast current rise time. In that case another
4.7 µF (type, see table under C1) at VCC2 will be helpful.
Under extreme EMI conditions as placing an
RF-transmitter antenna on top of the transceiver, we
recommend to protect all inputs by a low-pass filter, as a
minimum a 12 pF capacitor, especially at the RXD port. The
transceiver itself withstands EMI at GSM frequencies above
500 V/m. When interference is observed, the wiring to the
inputs picks it up. It is verified by DPI measurements that as
long as the interfering RF - voltage is below the logic
Fig. 1 - Recommended Application Circuit
Note
*) R1 is optional when reduced intensity is used
The capacitor C1 is buffering the supply voltage and
eliminates the inductance of the power supply line. This one
should be a tantalum or other fast capacitor to guarantee the
fast rise time of the IRED current. The resistor R1 is the
current limiting resistor, which may be used to reduce the
operating current to levels below the specified controlled
values for saving battery power.
Vishay’s transceivers integrate a sensitive receiver and a
built-in power driver. The combination of both needs a
careful circuit board layout. The use of thin, long, resistive
and inductive wiring should be avoided. The shutdown input
must be grounded for normal operation, also when the
shutdown function is not used.
Document Number: 81965
Rev. 1.0, 22-Apr-10
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
www.vishay.com
5
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
threshold levels of the inputs and equivalent levels at the
outputs no interferences are expected.
One should keep in mind that basic RF - design rules for
circuits design should be taken into account. Especially
longer signal lines should not be used without termination.
See e.g. “The Art of Electronics” Paul Horowitz, Winfield Hill,
1989, Cambridge University Press, ISBN: 0521370957.
Vbatt 3 V to 3.6 V
V
S = 3.3 V
Vdd
IRED Anode (1)
IRED Cathode (2)
TXD (3)
IRTX
IRRX
RXD (4)
IR MODE
SD (5)
V
CC1 (6)
R2
C2
NC (7)
GND (8)
19296-1
Fig. 2 - Typical Application Circuit
Figure 2 shows an example of a typical application for to
work with a separate supply voltage VS and using the
transceiver with the IRED Anode connected to the
unregulated battery Vbatt. This method reduces the peak load
of the regulated power supply and saves therefore costs.
Alternatively all supplies can also be tied to only one voltage
source. R1 and C1 are not used in this case and are
depending on the circuit design in most cases not necessary.
CURRENT DERATING DIAGRAM
Figure 3 shows the maximum operating temperature when
the device is operated without external current limiting
resisor.
90
85
80
75
70
65
I/O AND SOFTWARE
In the description, already different I/Os are mentioned.
Different combinations are tested and the function verified
with the special drivers available from the I/O suppliers. In
special cases refer to the I/O manual, the Vishay application
notes, or contact directly Vishay Sales, Marketing or
Application.
60
55
50
2
2.5
3
3.5
4
4.5
5
5.5
6
For operating at RS232 ports the ENDECS TOIM4232 or
TOIM5232 is recommended.
18097
Operating Voltage (V) at Duty Cycle 20 %
Fig. 3 - Current Derating Diagram
Note
TFDU4301 echoes the TXD signal at the RXD output during
transmission. For communication this signal is to be correctly
ignored by the controller or the software. The echo signal is
implemented for test purposes in mass production.
TABLE 2. TRUTH TABLE
INPUTS
OUTPUTS
REMARK
SD
TXD
OPTICAL INPUT IRRADIANCE mW/m2
RXD
TRANSMITTER
OPERATION
Weakly pulled
(500 kΩ) to VCC1
High > 1 ms
x
x
0
Shutdown
Low
Low
High
x
x
Low (active)
High inactive
Ie
0
Transmitting
High > 100 µs
Protection is active
Ignoring low signals below
the IrDA defined threshold
for noise immunity
Low
Low
< 4
High inactive
0
> min. detection threshold irradiance
< max. detection threshold irradiance
Response to an IrDA
compliant optical input signal
Low
Low
Low
Low
Low (active)
Undefined
0
0
Overload conditions can
cause unexpected outputs
> min. detection threshold irradiance
www.vishay.com
6
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
Document Number: 81965
Rev. 1.0, 22-Apr-10
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
RECOMMENDED SOLDER PROFILES
275
250
225
200
175
150
125
100
75
≥
Tpeak = 260 °C
T
255 °C for 10 s....30 s
Solder Profile for Sn/Pb Soldering
≥
T
217 °C for 70 s max.
260
10 s max. at 230 °C
240
220
200
180
160
140
120
100
80
240 °C max.
30 s max.
70 s max.
2 to 4 °C/s
160 °C max.
90 s to 120 s
2 °C/s to 4 °C/s
120 to180 s
90 s max.
2 °C/s to 3 °C/s
50
25
2 to 4 °C/s
0
60
40
20
0
50
100
150
200
250
300
350
19532
Time/s
Fig. 5 - Solder Profile, RSS Recommendation
0
0
50
100
150
200
250
300
350
280
240
200
160
120
80
19535
Time/s
Tpeak = 260 °C max.
Fig. 4 - Recommended Solder Profile for Sn/Pb Soldering
Lead (Pb)-free, Recommended Solder Profile
< 4 °C/s
The TFDU4301 is a lead (Pb)-free transceiver and qualified
for lead (Pb)-free processing. For lead (Pb)-free solder paste
like Sn(3.0-4.0)Ag(0.5-0.9)Cu, there are two standard reflow
profiles: Ramp-Soak-Spike (RSS) and Ramp-To-Spike
(RTS). The Ramp-Soak-Spike profile was developed
primarily for reflow ovens heated by infrared radiation. With
widespread use of forced convection reflow ovens the
Ramp-To-Spike profile is used increasingly. Shown below in
figure 5 and 6 are VISHAY's recommended profiles for use
with the TFDU4301 transceivers. For more details please
refer to the application note “SMD Assembly Instructions”.
A ramp-up rate less than 0.9 °C/s is not recommended.
Ramp-up rates faster than 1.3 °C/s could damage an optical
part because the thermal conductivity is less than compared
to a standard IC.
1.3 °C/s
Time above 217 °C t ≤ 70 s
< 2 °C/s
= 260 °C
≤
Time above 250 °C t 40 s
Peak temperature T
peak
40
0
0
50
100
150
200
250
300
TFDU Fig3
Time/s
Fig. 6 - RTS Recommendation
Wave Soldering
For TFDUxxxx and TFBSxxxx transceiver devices wave
soldering is not recommended.
Manual Soldering
Manual soldering is the standard method for lab use.
However, for
a
production process it cannot be
recommended because the risk of damage is highly
dependent on the experience of the operator. Nevertheless,
we added a chapter to the above mentioned application note,
describing manual soldering and desoldering.
Storage
The storage and drying processes for all VISHAY
transceivers (TFDUxxxx and TFBSxxx) are equivalent to
MSL4.
The data for the drying procedure is given on labels on the
packing and also in the application note “Taping, Labeling,
Storage and Packing”.
Document Number: 81965
Rev. 1.0, 22-Apr-10
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
www.vishay.com
7
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
20627
Footprint
Mounting Center
Mounting Center
7 x 0.95 = 6.65
0.95
0.2*
0.7
0.7 (8 x)
Top View
Side View
* min 0.2 Photoimageable
solder mask recommended
between pads to prevent bridgeing
20626
www.vishay.com
8
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
Document Number: 81965
Rev. 1.0, 22-Apr-10
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
REEL DIMENSIONS in millimeters
Drawing-No.: 9.800-5090.01-4
Issue: 1; 29.11.05
14017
TAPE WIDTH
A MAX.
(mm)
N
(mm)
W1 MIN.
(mm)
W2 MAX.
(mm)
W3 MIN.
(mm)
W3 MAX.
(mm)
(mm)
16
180
330
60
50
16.4
16.4
22.4
22.4
15.9
15.9
19.4
19.4
16
Document Number: 81965
Rev. 1.0, 22-Apr-10
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
www.vishay.com
9
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
TAPE DIMENSIONS in millimeters
Drawing-No.: 9.700-5280.01-4
Issue: 1; 03.11.03
19855
Fig. 7 - Tape Drawing, TFDU4301 for Top View Mounting
www.vishay.com
10
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
Document Number: 81965
Rev. 1.0, 22-Apr-10
TFDU4301
Infrared Transceiver Module (SIR, 115.2 kbit/s)
for IrDA® Applications
Vishay Semiconductors
19856
Drawing-No.: 9.700-5279.01-4
Issue: 1; 08.12.04
19856
Fig. 8 - Tape Drawing, TFDU4301 for Side View Mounting
Document Number: 81965
Rev. 1.0, 22-Apr-10
For technical questions within your region, please contact one of the following:
irdasupportAM@vishay.com, irdasupportAP@vishay.com, irdasupportEU@vishay.com
www.vishay.com
11
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
TFDU5102
Fast Infrared Transceiver Module Family (MIR, 1 Mbit/s) for 2.6 V to 5.5 V Operation
VISHAY
TFDU5102-TR3
Fast Infrared Transceiver Module Family (MIR, 1 Mbit/s) for 2.6 V to 5.5 V Operation
VISHAY
TFDU5103-TR3
Fast Infrared Transceiver Module (MIR, 1.152 Mbit/s) for 2.7 V to 5.5 V Operation
VISHAY
TFDU5103-TT3
Fast Infrared Transceiver Module (MIR, 1.152 Mbit/s) for 2.7 V to 5.5 V Operation
VISHAY
©2020 ICPDF网 联系我们和版权申明