首页 |元器件品牌

TGL41-18-E3/96 [VISHAY]

Trans Voltage Suppressor Diode, 14.5V V(RWM), Unidirectional,;
TGL41-18-E3/96
型号： TGL41-18-E3/96
厂家： VISHAY    VISHAY
描述：

Trans Voltage Suppressor Diode, 14.5V V(RWM), Unidirectional,

二极管
文件： 总5页 (文件大小：88K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
TGL41-6.8A thru TGL41-200A  
www.vishay.com  
Vishay General Semiconductor  
TRANSZorb® Transient Voltage Suppressors  
FEATURES  
• Plastic MELF package  
• Ideal for automated placement  
• Glass passivated chip junction  
• Available in uni-directional polarity only  
• 400 W peak pulse power capability with a  
10/1000 μs waveform, repetitive rate (duty  
cycle): 0.01 %  
• Excellent clamping capability  
• Very fast response time  
DO-213AB (GL41)  
• Low incremental surge resistance  
• Meets MSL level 1, per J-STD-020, LF maximum peak of  
250 °C  
• Material categorization: For definitions of compliance  
please see www.vishay.com/doc?99912  
TYPICAL APPLICATIONS  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching and lighting  
on ICs, MOSFET, signal lines of sensor units for consumer,  
computer, industrial, and telecommunication.  
PRIMARY CHARACTERISTICS  
VBR uni-directional  
6.45 V to 210 V  
VWM  
PPPM  
PD  
5.8 V to 171 V  
400 W, 200 W  
1.0 W  
MECHANICAL DATA  
IFSM  
40 A  
Case: DO-213AB (GL41)  
Molding compound meets UL 94 V-0 flammability rating  
Base P/N-E3 - RoHS compliant, commercial grade  
TJ max.  
Polarity  
Package  
150 °C  
Uni-directional  
DO-213 AB (GL41)  
Terminals: Matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
E3 suffix meets JESD 201 class 1A whisker test  
Polarity: Blue band denotes the cathode which is positive  
with respect to the anode under normal TVS operation  
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)  
PARAMETER  
SYMBOL  
PPPM  
PD  
VALUE  
UNIT  
W
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)  
400  
1.0  
Power dissipation on infinite heatsink at TL = 75 °C  
W
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)  
Peak forward surge current, 8.3 ms half sine-wave uni-directional only (2)  
Maximum instantaneous forward voltage at 25 A for uni-directional only  
Operating junction and storage temperature range  
IPPM  
See next table  
40  
A
IFSM  
A
VF  
3.5  
V
TJ, TSTG  
- 55 to 150  
°C  
Notes  
(1)  
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2. Rating is 200 W above 91 V  
Measured at 8.3 ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum  
(2)  
Revision: 11-Dec-12  
Document Number: 88403  
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
TGL41-6.8A thru TGL41-200A  
www.vishay.com  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
BREAKDOWN  
VOLTAGE  
MAXIMUM  
MAXIMUM  
REVERSE  
LEAKAGE  
AT VWM ID  
(μA)  
MAXIMUM  
CLAMPING  
VOLTAGE  
AT IPPM  
MAXIMUM  
TEMPERATURE  
COEFFICENT  
OF VBR  
TEST  
CURRENT  
IT  
STAND-OFF  
VOLTAGE  
VWM  
PEAK  
PULSE  
(1)  
DEVICE  
TYPE  
VBR  
(V)  
CURRENT  
(2)  
(mA)  
(V)  
IPPM  
VC (V)  
(%/°C)  
MIN.  
MAX.  
(A)  
38.1  
35.4  
33.1  
29.9  
27.6  
25.6  
24.0  
22.0  
18.9  
17.8  
15.9  
14.4  
13.1  
12.0  
10.7  
9.7  
TGL41-6.8A  
TGL41-7.5A  
TGL41-8.2A  
TGL41-9.1A  
TGL41-10A  
TGL41-11A  
TGL41-12A  
TGL41-13A  
TGL41-15A  
TGL41-16A  
TGL41-18A  
TGL41-20A  
TGL41-22A  
TGL41-24A  
TGL41-27A  
TGL41-30A  
TGL41-33A  
TGL41-36A  
TGL41-39A  
TGL41-43A  
TGL41-47A  
TGL41-51A  
TGL41-56A  
TGL41-62A  
TGL41-68A  
TGL41-75A  
TGL41-82A  
TGL41-91A  
TGL41-100A  
TGL41-110A  
TGL41-120A  
TGL41-130A  
TGL41-150A  
TGL41-160A  
TGL41-170A  
TGL41-180A  
TGL41-200A  
6.45  
7.13  
7.79  
8.65  
9.5  
7.14  
7.88  
8.61  
9.55  
10.5  
11.6  
12.6  
13.7  
15.8  
16.8  
18.9  
21.0  
23.1  
25.2  
28.4  
31.5  
34.7  
37.8  
41.0  
45.2  
49.4  
53.6  
58.8  
65.1  
71.4  
78.8  
86.1  
95.5  
105  
10  
10  
5.80  
6.40  
7.02  
7.78  
8.55  
9.40  
10.2  
11.1  
12.8  
13.6  
15.3  
17.1  
18.8  
20.5  
23.1  
25.6  
28.2  
30.8  
33.3  
36.8  
40.2  
43.6  
47.8  
53.0  
58.1  
64.1  
70.1  
77.8  
85.5  
94.0  
102  
1000  
500  
200  
50.0  
10.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
10.5  
11.3  
12.1  
13.4  
14.5  
15.6  
16.7  
18.2  
21.2  
22.5  
25.2  
27.7  
30.6  
33.2  
37.5  
41.4  
45.7  
49.9  
53.9  
59.3  
64.8  
70.1  
77.0  
85.0  
92.0  
103  
0.060  
0.064  
0.068  
0.071  
0.076  
0.078  
0.081  
0.084  
0.087  
0.089  
0.091  
0.093  
0.095  
0.097  
0.099  
0.100  
0.101  
0.102  
0.103  
0.104  
0.104  
0.105  
0.106  
0.107  
0.107  
0.108  
0.108  
0.109  
0.109  
0.110  
0.110  
0.110  
0.111  
0.111  
0.111  
0.111  
0.111  
10  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
10.5  
11.4  
12.4  
14.3  
15.2  
17.1  
19.0  
20.9  
22.8  
25.7  
28.5  
31.4  
34.2  
37.1  
40.9  
44.7  
48.5  
53.2  
58.9  
64.6  
71.3  
77.9  
86.5  
95.0  
105  
8.8  
8.0  
7.4  
6.7  
6.2  
5.7  
5.2  
4.7  
4.3  
3.9  
3.5  
113  
3.2  
125  
1.46  
1.32  
1.21  
1.12  
0.97  
0.91  
0.85  
0.81  
0.73  
137  
116  
152  
114  
126  
165  
124  
137  
111  
179  
143  
158  
128  
207  
152  
168  
136  
219  
162  
179  
145  
234  
171  
189  
154  
246  
190  
210  
171  
274  
Notes  
(1)  
(2)  
(2)  
Pulse test: tp 50 ms  
Surge current waveform per fig. 3 and derate per fig. 2  
All terms and symbols are consistent with ANSI/IEEE C62.35  
ORDERING INFORMATION (Example)  
PREFERRED PIN  
TGL41-6.8A-E3/96  
TGL41-6.8A-E3/97  
UNIT WEIGHT (g)  
PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
0.134  
96  
97  
1500  
5000  
7" diameter plastic tape and reel  
13" diameter plastic tape and reel  
0.134  
Revision: 11-Dec-12  
Document Number: 88403  
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
TGL41-6.8A thru TGL41-200A  
www.vishay.com  
Vishay General Semiconductor  
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)  
100  
10 000  
1000  
100  
Non-Repetitive Pulse  
Waveform shown in Fig. 3  
TA = 25 °C  
Measured at  
Zero Bias  
10  
TGL41-6.8 TGL91A  
Measured at Stand-Off  
Voltage VWM  
1
TJ = 25 °C  
f = 1.0 MHz  
Vsig = 50 mVp-p  
TGL41-100 TGL200A  
Uni-Directional  
100 1000  
0.1  
10  
0.1 µs  
1.0 µs  
10 µs  
100 µs  
1.0 ms  
10 ms  
1
0
1
10  
td - Pulse Width  
VBR - Breakdown Voltage (V)  
Fig. 4 - Typical Junction Capacitance  
Fig. 1 - Peak Pulse Power Rating Curve  
100  
75  
50  
25  
0
1.00  
0.75  
0.50  
0.25  
0
0
25  
50  
75 100 125 150 175 200  
25  
50  
75 100 125 150 175 200  
TJ - Initial Temerature (°C)  
TL - Lead Temerature (°C)  
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature  
Fig. 5 - Power Derating Curve  
150  
50  
40  
30  
20  
10  
0
TJ = 25 °C  
tr = 10 µs  
TJ = TJ Max.  
8.3 ms Single Half Sine-Wave  
Pulse Width (td)  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
Peak Value  
IPPM  
100  
50  
0
Half Value - IPP  
IPPM  
2
10/1000 µs Waveform  
as defined by R.E.A.  
td  
0
1.0  
2.0  
3.0  
4.0  
10  
100  
t - Time (ms)  
Number of Cycles at 60 Hz  
Fig. 3 - Pulse Waveform  
Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current  
Uni-Directional Only  
Revision: 11-Dec-12  
Document Number: 88403  
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
TGL41-6.8A thru TGL41-200A  
www.vishay.com  
Vishay General Semiconductor  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
DO-213AB (GL41)  
Mounting Pad Layout  
Solderable Ends  
st Band  
+ 0  
D2 = D1  
- 0.008 (0.20)  
0.138 (3.5)  
MAX.  
1
D1 =  
0.105  
0.095  
D2  
0.118 (3.0)  
MIN.  
(2.67)  
(2.41)  
0.049 (1.25)  
MIN.  
0.022 (0.56)  
0.018 (0.46)  
0.022 (0.56)  
0.018 (0.46)  
0.238 (6.0)  
REF.  
0.205 (5.2)  
0.185 (4.7)  
1st Band Denotes Type and Positive End (Cathode)  
Revision: 11-Dec-12  
Document Number: 88403  
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular  
product with the properties described in the product specification is suitable for use in a particular application. Parameters  
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All  
operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please  
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Material Category Policy  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the  
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council  
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment  
(EEE) - recast, unless otherwise specified as non-compliant.  
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that  
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free  
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference  
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21  
conform to JEDEC JS709A standards.  
Revision: 02-Oct-12  
Document Number: 91000  
1

相关型号：

TGL41-18-E3/97

 Trans Voltage Suppressor Diode, 14.5V V(RWM), Unidirectional,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

TGL41-180

 500 Watt Transient Voltage Suppressor

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MICROSEMI

TGL41-180

 Unidirectional and bidirectional Transient Voltage Suppressor diodes

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SEMIKRON

TGL41-180

 Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
DIOTEC

TGL41-180

 SURFACE MOUNT TRANSZORB⑩ TRANSIENT VOLTAGE SUPPRESSOR

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

TGL41-180/26

 Trans Voltage Suppressor Diode, 200W, 146V V(RWM), Unidirectional, 1 Element, Silicon, DO-213AB, PLASTIC, GL41, 2 PIN

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

TGL41-180/46

 Trans Voltage Suppressor Diode, 146V V(RWM), Unidirectional,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

TGL41-180A

 500 Watt Transient Voltage Suppressor

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MICROSEMI

TGL41-180A

 Unidirectional and bidirectional Transient Voltage Suppressor diodes

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SEMIKRON

TGL41-180A

 Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
DIOTEC

TGL41-180A

 SURFACE MOUNT TRANSZORB⑩ TRANSIENT VOLTAGE SUPPRESSOR

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

TGL41-180A-26

 Trans Voltage Suppressor Diode, 200W, 154V V(RWM), Unidirectional, 1 Element, Silicon, DO-213AB, PLASTIC, GL41, 2 PIN

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明