TH3B155M035C4200 [VISHAY]
CAP TANT 1.5UF 35V 20% 1411;型号: | TH3B155M035C4200 |
厂家: | VISHAY |
描述: | CAP TANT 1.5UF 35V 20% 1411 |
文件: | 总18页 (文件大小:470K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TH3
Vishay Sprague
www.vishay.com
Solid Tantalum Surface Mount Capacitors
TANTAMOUNT™ Molded Case, HI-TMP®
High Temperature 150 °C, Automotive Grade
FEATURES
• Operating temperature up to 150 °C with 50 ꢀ
voltage derating
• AEC-Q200 qualified
• 100 ꢀ surge current tested
Available
Available
(B, C, D, E case sizes)
• RoHS-compliant terminations available:
matte tin (all cases), gold (A, C, D, and E cases)
• Standard EIA 535BAAC case size (A through E)
• Compliant terminations
Available
• Moisture sensitivity level 1
LINKS TO ADDITIONAL RESOURCES
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
3
D
3D Models
Calculators
Related
Documents
Infographics
Did You
Know
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
T
Technical
Notes
APPLICATIONS
• Automotive
PERFORMANCE / ELECTRICAL
CHARACTERISTICS
www.vishay.com/doc?40215
• Industrial
Operating Temperature: -55 °C to +150 °C
Capacitance Range: 0.33 μF to 220 μF
Capacitance Tolerance: 10 ꢀ, 20 ꢀ
Voltage Rating: 6.3 VDC to 50 VDC
• High temperature sensors
Note
•
For recommended voltage derating guidelines see “Typical
Performance Characteristics”
ORDERING INFORMATION
TH3
D
106
K
035
C
0700
TYPE
CASE
CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT +85 °C
TERMINATION AND
PACKAGING
ESR
See
Ratings
and Case
Codes
table.
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros
to follow.
K = 10 ꢀ
M = 20 ꢀ
This is expressed in V.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”.
(6R3 = 6.3 V)
Gold
Maximum
100 kHz ESR
0500 = 500 m
5000 = 5.0
10R0 = 10.0
A = 7" (178 mm) reel
B = 13" (330 mm) reel
Matte tin
C = 7" (178 mm) reel
D = 13" (330 mm) reel
V = 7" (178 mm) reel,
dry pack
U = 13" (330 mm) reel,
dry pack
Tin / lead
E = 7" (178 mm) reel
F = 13" (330 mm) reel
T = 7" (178 mm) reel,
dry pack
W = 13" (330 mm) reel,
dry pack
Notes
•
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage
substitutions will be marked with the higher voltage rating
•
Dry pack as specified in J-STD-033
Revision: 22-Oct-2020
Document Number: 40084
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TH3
Vishay Sprague
www.vishay.com
DIMENSIONS in inches [millimeters]
L
W
H
TW
Glue Pad
TH (MIN.)
P
Glue Pad
CASE CODE
EIA SIZE
L
W
H
P
TW
TH (MIN.)
0.126 0.008
[3.2 0.20]
0.063 0.008
[1.6 0.20]
0.063 0.008
[1.6 0.20]
0.031 0.012
[0.80 0.30]
0.047 0.004
[1.2 0.10]
0.028
[0.70]
A
3216-18
0.138 0.008
[3.5 0.20]
0.110 0.008
[2.8 0.20]
0.075 0.008
[1.9 0.20]
0.031 0.012
[0.80 0.30]
0.087 0.004
[2.2 0.10]
0.028
[0.70]
B
C
D
E
3528-21
6032-28
7343-31
7343-43
0.236 0.012
[6.0 0.30]
0.126 0.012
[3.2 0.30]
0.098 0.012
[2.5 0.30]
0.051 0.012
[1.3 0.30]
0.087 0.004
[2.2 0.10]
0.039
[1.0]
0.287 0.012
[7.3 0.30]
0.169 0.012
[4.3 0.30]
0.110 0.012
[2.8 0.30]
0.051 0.012
[1.3 0.30]
0.094 0.004
[2.4 0.10]
0.039
[1.0]
0.287 0.012
[7.3 0.30]
0.169 0.012
[4.3 0.30]
0.157 0.012
[4.0 0.30]
0.051 0.012
[1.3 0.30]
0.094 0.004
[2.4 0.10]
0.039
[1.0]
Note
•
Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option)
RATINGS AND CASE CODES
μF
6.3 V
10 V
16 V
20 V
25 V
35 V
50 V
0.33
0.47
0.68
A (11.0)
A (14.0)
A (3.0, 5.2) /
B (5.0)
1.0
A (6.5)
A (4.3)
A (5.9)
A (6.6) / B (4.4)
B (4.2) / C (3.3)
C (3.3)
1.5
2.2
A (4.6)
A (5.9) / B (3.5) A (5.2) / B (3.0) B (2.5) / C (2.2)
B (2.5, 3.5) /
3.3
4.7
6.8
10
A (3.4) / B (3.0) B (2.7) / C (3.7) B (3.0) / C (2.0)
D (1.7)
C (1.5) / D (0.9)
D (0.9)
C (1.7)
A (5.0) /
B (2.9, 1.9) /
C (1.7)
A (5.0) / B (2.8) / B (3.1) / C (1.3) /
A (2.9) / B (2.7) A (2.9) / B (2.1)
C (1.6)
D (1.0)
A (2.6, 2.0) /
A (2.6)
B (2.4) / C (1.4) C (1.8) / D (0.9)
B (1.8) / C (1.7)
A (3.4, 2.0) /
B (1.8) /
B (2.0) /
C (1.4, 0.8)
C (1.8, 1.7)
C (1.6) /
C (1.1) / D (0.9)
A (3.4, 2.7)
B (1.8)
C (1.1)
D (0.8) / E (0.5)
D (0.25, 0.3, 0.7)
A (2.9, 2.0) /
B (2.0) / C (1.0) /
D (0.9)
B (1.4, 2.0) /
D (0.7)
15
B (2.0, 1.8, 1.5) / B (2.0) / C (1.0)
C (1.8, 1.4)
C (1.2) / D (0.7)
B (1.9) /
B (1.5) /
D (0.3, 0.6) /
22
33
47
B (2.0, 1.5)
B (1.9, 1.7)
C (0.8, 1.0) /
C (1.5, 1.1)
C (1.0) / D (0.7)
D (0.6)
D (0.6)
E (0.5)
D (0.8)
B (1.9, 1.4) /
D (0.8)
C (0.9, 0.6) /
D (0.6)
D (0.5)
E (0.6)
B (1.8) /
C (0.8, 0.5) /
D (0.6)
C (0.8, 0.6) /
D (0.6)
B (1.8) / C (0.8)
D (0.7) / E (0.6)
E (0.6)
C (1.0, 0.8) /
D (1.0, 0.6, 0.4)
68
B (1.8)
E (0.3)
D (0.6)
C (0.9, 0.5) /
D (0.6)
D (0.6) /
E (0.6, 0.15)
100
150
220
D (0.6)
E (0.5)
Note
•
ESR limits in are shown in parenthesis
Revision: 22-Oct-2020
Document Number: 40084
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TH3
Vishay Sprague
www.vishay.com
MARKING
“A” CASE VOLTAGE CODE
Indicates high temperature
Indicates
high temperature
Capacitance code, pF
VOLTS
4.0
6.3
10
CODE
Voltage
Capacitance, μF
G
J
Date code
designation
22
H10
A
C
D
E
V
T
V 104H
Polarity
band (+)
16
2
XX
20
Voltage
code
25
Date code
Vishay marking
Polarity band (+)
35
A Case
B, C, D, E Case
50
Marking
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay identification marking is included if space permits. Vishay marking (“circled 2”) may show additives in the form of short lines,
depicting actual manufacturing facility. For A case capacitors discontinuation in polarity bar maybe used as actual manufacturing facility
designation. Capacitors rated at 6.3 V are marked 6 V. Uppercase letter “H” indicates lead (Pb)-free capacitors; lowercase letter “h”
indicates SnPb containing capacitors.
A manufacturing date code is marked on all capacitors. for details see FAQ: www.vishay.com/doc?40110.
Call the factory for further explanation.
STANDARD RATINGS
MAX. ESR
AT +25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
(%)
CAPACITANCE
(μF)
CASE CODE
PART NUMBER
(A)
6.3 VDC AT +85 °C; 4 VDC AT +125 °C; 3.15 VDC AT +150 °C
10
10
15
22
22
33
33
47
47
68
100
A
A
B
B
B
B
B
B
C
B
E
TH3A106(1)6R3(3)3400
TH3A106(1)6R3(3)2700
TH3B156(1)6R3(2)1800
TH3B226(1)6R3(2)2000
TH3B226(1)6R3(2)1500
TH3B336(1)6R3(2)1900
TH3B336(1)6R3(2)1700
TH3B476(1)6R3(2)1800
TH3C476(1)6R3(3)0800
TH3B686(1)6R3(2)1800
TH3E107(1)6R3(3)0300
0.6
0.6
0.9
1.3
1.3
2.0
2.0
2.8
2.8
4.1
6.0
6
6
6
6
6
6
6
8
6
6
6
3.40
2.70
1.80
2.00
1.50
1.90
1.70
1.80
0.80
1.80
0.30
0.15
0.17
0.22
0.21
0.24
0.21
0.22
0.22
0.37
0.22
0.74
10 VDC AT +85 °C; 7 VDC AT +125 °C; 5 VDC AT +150 °C
2.2
4.7
4.7
6.8
10
10
10
10
10
15
15
15
15
15
15
15
A
A
B
A
A
A
B
C
C
A
A
B
B
B
C
C
TH3A225(1)010(3)4600
TH3A475(1)010(3)2900
TH3B475(1)010(2)2700
TH3A685(1)010(3)2600
TH3A106(1)010(3)3400
TH3A106(1)010(3)2000
TH3B106(1)010(2)1800
TH3C106(1)010(3)1800
TH3C106(1)010(3)1700
TH3A156(1)010(3)2900
TH3A156(1)010(3)2000
TH3B156(1)010(2)2000
TH3B156(1)010(2)1800
TH3B156(1)010(2)1500
TH3C156(1)010(3)1800
TH3C156(1)010(3)1400
0.5
0.5
0.5
6.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
4.60
2.90
2.70
2.60
3.40
2.00
1.80
1.80
1.70
2.90
2.00
2.00
1.80
1.50
1.80
1.40
0.13
0.16
0.18
0.17
0.15
0.19
0.22
0.25
0.25
0.16
0.19
0.21
0.22
0.24
0.25
0.28
Note
•
Part number definitions:
(1) Capacitance tolerance: K, M
(2) Termination and packaging: C, D, E, F, V, U, T, W
(3) Termination and packaging: A, B, C, D, E, F, V, U, T, W
Revision: 22-Oct-2020
Document Number: 40084
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TH3
Vishay Sprague
www.vishay.com
STANDARD RATINGS
MAX. ESR
MAX. RIPPLE
100 kHz
IRMS
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
(%)
CAPACITANCE
(μF)
AT +25 °C
100 kHz
()
CASE CODE
PART NUMBER
(A)
10 VDC AT +85 °C; 7 VDC AT +125 °C; 5 VDC AT +150 °C
22
22
22
33
33
33
47
47
47
47
68
68
68
68
68
B
C
C
B
B
D
B
C
C
D
C
C
D
D
D
C
C
D
D
E
TH3B226(1)010(2)1500
TH3C226(1)010(3)1500
TH3C226(1)010(3)1100
TH3B336(1)010(2)1900
TH3B336(1)010(2)1400
TH3D336(1)010(3)0800
TH3B476(1)010(2)1800
TH3C476(1)010(3)0800
TH3C476(1)010(3)0500
TH3D476(1)010(3)0600
TH3C686(1)010(3)1000
TH3C686(1)010(3)0800
TH3D686(1)010(3)1000
TH3D686(1)010(3)0600
TH3D686(1)010(3)0400
TH3C107(1)010(3)0900
TH3C107(1)010(3)0500
TH3D107(1)010(3)0600
TH3D157(1)010(3)0600
TH3E227(1)010(3)0500
2.2
2.2
2.2
3.3
3.3
3.3
4.7
4.7
4.7
4.7
6.8
6.8
6.8
6.8
6.8
6
6
6
6
6
6
6
6
6
6
8
8
6
6
6
6
6
8
8
8
1.50
1.50
1.10
1.90
1.40
0.80
1.80
0.80
0.50
0.60
1.00
0.80
1.00
0.60
0.40
0.90
0.50
0.60
0.60
0.50
0.24
0.27
0.32
0.21
0.25
0.43
0.22
0.37
0.47
0.50
0.33
0.37
0.39
0.50
0.61
0.35
0.47
0.50
0.50
0.61
100
100
100
150
220
10.0
10.0
10.0
15.0
22.0
16 VDC AT +85 °C; 10 VDC AT +125 °C; 8 VDC AT +150 °C
1.0
2.2
3.3
3.3
4.7
4.7
6.8
6.8
6.8
6.8
10
10
10
15
15
22
22
22
22
33
33
33
47
47
47
68
100
100
100
A
A
A
B
A
B
A
A
B
C
B
C
C
B
C
B
C
C
D
C
C
D
C
C
D
D
D
E
TH3A105(1)016(3)6500
TH3A225(1)016(3)4300
TH3A335(1)016(3)3400
TH3B335(1)016(2)3000
TH3A475(1)016(3)2900
TH3B475(1)016(2)2100
TH3A685(1)016(3)2600
TH3A685(1)016(3)2000
TH3B685(1)016(2)1800
TH3C685(1)016(3)1700
TH3B106(1)016(2)2000
TH3C106(1)016(3)1400
TH3C106(1)016(3)0800
TH3B156(1)016(2)2000
TH3C156(1)016(3)1000
TH3B226(1)016(2)1900
TH3C226(1)016(3)1000
TH3C226(1)016(3)0800
TH3D226(1)016(3)0800
TH3C336(1)016(3)0900
TH3C336(1)016(3)0600
TH3D336(1)016(3)0600
TH3C476(1)016(3)0800
TH3C476(1)016(3)0600
TH3D476(1)016(3)0600
TH3D686(1)016(3)0600
TH3D107(1)016(3)0600
TH3E107(1)016(3)0600
TH3E107(1)016(3)0150
0.5
0.5
0.5
0.5
0.8
0.8
1.1
1.1
1.1
1.1
1.6
1.6
1.6
2.4
2.4
3.5
3.5
3.5
3.5
5.3
5.3
5.3
7.5
7.5
7.5
10.9
16.0
16.0
16.0
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
4.5
6
6
6
6
6
6
6
6
8
8
8
6.50
4.30
3.40
3.00
2.90
2.10
2.60
2.00
1.80
1.70
2.00
1.40
0.80
2.00
1.00
1.90
1.00
0.80
0.80
0.90
0.60
0.60
0.80
0.60
0.60
0.60
0.60
0.60
0.15
0.11
0.13
0.15
0.17
0.16
0.2
0.17
0.19
0.22
0.25
0.21
0.28
0.37
0.21
0.33
0.21
0.33
0.37
0.43
0.35
0.43
0.50
0.37
0.43
0.43
0.50
0.50
0.56
1.11
E
Note
•
Part number definitions:
(1) Capacitance tolerance: K, M
(2) Termination and packaging: C, D, E, F, V, U, T, W
(3) Termination and packaging: A, B, C, D, E, F, V, U, T, W
Revision: 22-Oct-2020
Document Number: 40084
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TH3
Vishay Sprague
www.vishay.com
STANDARD RATINGS
MAX. ESR
MAX. RIPPLE
100 kHz
IRMS
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
(%)
CAPACITANCE
(μF)
AT +25 °C
100 kHz
()
CASE CODE
PART NUMBER
(A)
20 VDC AT +85 °C; 13 VDC AT +125 °C; 10 VDC AT +150 °C
1.0
2.2
2.2
3.3
3.3
4.7
4.7
4.7
4.7
10
A
A
B
B
C
A
B
B
C
C
B
C
D
C
D
D
D
E
TH3A105(1)020(3)5900
TH3A225(1)020(3)5900
TH3B225(1)020(2)3500
TH3B335(1)020(2)2700
TH3C335(1)020(3)2700
TH3A475(1)020(3)5000
TH3B475(1)020(2)1900
TH3B475(1)020(2)2900
TH3C475(1)020(3)1700
TH3C106(1)020(3)1100
TH3B156(1)020(2)2000
TH3C156(1)020(3)1000
TH3D156(1)020(3)0900
TH3C226(1)020(3)1000
TH3D226(1)020(3)0700
TH3D336(1)020(3)0600
TH3D476(1)020(3)0700
TH3E476(1)020(3)0600
TH3E686(1)020(3)0600
0.5
0.5
0.5
0.7
0.7
0.9
0.9
0.9
0.9
2.0
3.0
3.0
3.0
4.4
4.4
6.6
9.4
9.4
13.6
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
5.90
5.90
3.50
2.70
2.70
5.00
2.90
1.90
1.70
1.10
2.00
1.00
0.90
1.00
0.70
0.60
0.70
0.60
0.60
0.11
0.11
0.16
0.18
0.20
0.12
0.17
0.21
0.25
0.32
0.21
0.33
0.41
0.33
0.46
0.5
15
15
15
22
22
33
47
0.46
0.56
0.56
47
68
E
25 VDC AT +85 °C; 17 VDC AT +125 °C; 12.5 VDC AT +150 °C
0.47
1.0
1.0
1.0
2.2
2.2
3.3
3.3
4.7
4.7
4.7
6.8
6.8
10
A
A
A
B
A
B
B
C
A
B
C
B
C
C
D
B
B
C
D
D
D
E
TH3A474(1)025(3)14R0
TH3A105(1)025(3)5200
TH3A105(1)025(3)3000
TH3B105(1)025(2)5000
TH3A225(1)025(3)5200
TH3B225(1)025(2)3000
TH3B335(1)025(2)3000
TH3C335(1)025(3)2000
TH3A475(1)025(3)5000
TH3B475(1)025(2)2800
TH3C475(1)025(3)1600
TH3B685(1)025(2)2400
TH3C685(1)025(3)1400
TH3C106(1)025(3)1100
TH3D106(1)025(3)0900
TH3B156(1)025(2)2000
TH3B156(1)025(2)1400
TH3C156(1)025(3)1200
TH3D156(1)025(3)0700
TH3D226(1)025(3)0600
TH3D336(1)025(3)0500
TH3E476(1)025(3)0600
0.5
0.5
0.5
0.5
0.6
0.6
0.8
0.8
1.2
1.2
1.2
1.7
1.7
2.5
2.5
3.8
3.8
3.8
3.8
5.5
8.3
11.8
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
14.00
5.20
3.00
5.00
5.20
3.00
3.00
2.00
5.00
2.80
1.60
2.40
1.40
1.10
0.90
2.00
1.40
1.20
0.70
0.60
0.50
0.60
0.073
0.12
0.16
0.13
0.12
0.17
0.17
0.23
0.12
0.17
0.26
0.19
0.28
0.32
0.41
0.21
0.25
0.30
0.46
0.50
0.55
0.56
10
15
15
15
15
22
33
47
Note
•
Part number definitions:
(1) Capacitance tolerance: K, M
(2) Termination and packaging: C, D, E, F, V, U, T, W
(3) Termination and packaging: A, B, C, D, E, F, V, U, T, W
Revision: 22-Oct-2020
Document Number: 40084
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TH3
Vishay Sprague
www.vishay.com
STANDARD RATINGS
MAX. ESR
MAX. RIPPLE
100 kHz
IRMS
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
(%)
CAPACITANCE
(μF)
AT +25 °C
100 kHz
()
CASE CODE
PART NUMBER
(A)
35 VDC AT +85 °C; 23 VDC AT +125 °C; 17.5 VDC AT +150 °C
0.33
1.0
1.0
1.5
1.5
2.2
2.2
3.3
3.3
3.3
4.7
4.7
4.7
6.8
6.8
10
A
A
B
B
C
B
C
B
B
C
B
C
D
C
D
C
D
D
D
D
D
D
E
TH3A334(1)035(3)11R0
TH3A105(1)035(3)6600
TH3B105(1)035(2)4400
TH3B155(1)035(2)4200
TH3C155(1)035(3)3300
TH3B225(1)035(2)2500
TH3C225(1)035(3)2200
TH3B335(1)035(2)3500
TH3B335(1)035(2)2500
TH3C335(1)035(3)1700
TH3B475(1)035(2)3100
TH3C475(1)035(3)1300
TH3D475(1)035(3)1000
TH3C685(1)035(3)1800
TH3D685(1)035(3)0900
TH3C106(1)035(3)1600
TH3D106(1)035(3)0700
TH3D106(1)035(3)0300
TH3D106(1)035(3)0250
TH3D156(1)035(3)0700
TH3D226(1)035(3)0600
TH3D226(1)035(3)0300
TH3E226(1)035(3)0500
0.5
0.5
0.5
0.5
0.5
0.8
0.8
1.2
1.2
1.2
1.7
1.6
1.6
2.4
2.4
3.5
3.5
3.5
3.5
5.3
7.7
7.7
7.7
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
11.00
6.60
4.40
4.20
3.30
2.50
2.20
3.50
2.50
1.70
3.10
1.30
1.00
1.80
0.90
1.60
0.70
0.30
0.25
0.70
0.60
0.30
0.50
0.08
0.11
0.14
0.14
0.18
0.18
0.22
0.16
0.18
0.25
0.17
0.29
0.39
0.25
0.41
0.26
0.46
0.71
0.77
0.46
0.50
0.71
0.61
10
10
10
15
22
22
22
50 VDC AT +85 °C; 33 VDC AT +125 °C; 25 VDC AT +150 °C
1.0
3.3
4.7
4.7
6.8
10
C
D
C
D
D
D
E
TH3C105(1)050(3)3300
TH3D335(1)050(3)1700
TH3C475(1)050(3)1500
TH3D475(1)050(3)0900
TH3D685(1)050(3)0900
TH3D106(1)050(3)0800
TH3E106(1)050(3)0500
0.5
1.7
2.4
2.4
3.4
5.0
5.0
4
6
6
6
6
6
6
3.30
1.70
1.50
0.90
0.90
0.80
0.50
0.18
0.30
0.27
0.41
0.41
0.43
0.61
10
Note
•
Part number definitions:
(1) Capacitance tolerance: K, M
(2) Termination and packaging: C, D, E, F, V, U, T, W
(3) Termination and packaging: A, B, C, D, E, F, V, U, T, W
POWER DISSIPATION
CASE CODE
MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR
A
B
C
D
E
0.075
0.085
0.110
0.150
0.165
Revision: 22-Oct-2020
Document Number: 40084
6
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TH3
Vishay Sprague
www.vishay.com
STANDARD PACKAGING QUANTITY
UNITS PER REEL
CASE CODE
7" REEL
2000
2000
500
13" REEL
9000
A
B
C
D
E
8000
3000
500
2500
400
1500
PRODUCT INFORMATION
Guide for Molded Tantalum Capacitors
Pad Dimensions
www.vishay.com/doc?40074
Package Dimensions
Moisture Sensitivity (MSL)
SELECTOR GUIDES
www.vishay.com/doc?40135
Solid Tantalum Selector Guide
Solid Tantalum Chip Capacitors
FAQ
www.vishay.com/doc?49053
www.vishay.com/doc?40091
Frequently Asked Questions
www.vishay.com/doc?40110
Revision: 22-Oct-2020
Document Number: 40084
7
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Molded Guide
Vishay Sprague
www.vishay.com
Guide for Molded Tantalum Capacitors
Rating for rating, tantalum capacitors tend to have as much
as three times better capacitance / volume efficiency than
aluminum electrolytic capacitors. An approximation of the
capacitance / volume efficiency of other types of capacitors
may be inferred from the following table, which shows the
dielectric constant ranges of the various materials used in
each type. Note that tantalum pentoxide has a dielectric
constant of 26, some three times greater than that of
aluminum oxide. This, in addition to the fact that extremely
thin films can be deposited during the electrolytic process
mentioned earlier, makes the tantalum capacitor extremely
efficient with respect to the number of microfarads available
per unit volume. The capacitance of any capacitor is
determined by the surface area of the two conducting
plates, the distance between the plates, and the dielectric
constant of the insulating material between the plates.
INTRODUCTION
Tantalum electrolytic capacitors are the preferred choice in
applications where volumetric efficiency, stable electrical
parameters, high reliability, and long service life are primary
considerations. The stability and resistance to elevated
temperatures of the tantalum / tantalum oxide / manganese
dioxide system make solid tantalum capacitors an
appropriate choice for today's surface mount assembly
technology.
Vishay Sprague has been a pioneer and leader in this field,
producing a large variety of tantalum capacitor types for
consumer, industrial, automotive, military, and aerospace
electronic applications.
Tantalum is not found in its pure state. Rather, it is
commonly found in a number of oxide minerals, often in
combination with Columbium ore. This combination is
known as “tantalite” when its contents are more than
one-half tantalum. Important sources of tantalite include
Australia, Brazil, Canada, China, and several African
countries. Synthetic tantalite concentrates produced from
tin slags in Thailand, Malaysia, and Brazil are also a
significant raw material for tantalum production.
Electronic applications, and particularly capacitors,
consume the largest share of world tantalum production.
Other important applications for tantalum include cutting
tools (tantalum carbide), high temperature super alloys,
chemical processing equipment, medical implants, and
military ordnance.
COMPARISON OF CAPACITOR
DIELECTRIC CONSTANTS
e
DIELECTRIC
DIELECTRIC CONSTANT
Air or vacuum
Paper
1.0
2.0 to 6.0
2.1 to 6.0
2.2 to 2.3
2.7 to 2.8
3.8 to 4.4
4.8 to 8.0
5.1 to 5.9
5.4 to 8.7
8.4
Plastic
Mineral oil
Silicone oil
Quartz
Glass
Vishay Sprague is a major user of tantalum materials in the
form of powder and wire for capacitor elements and rod and
sheet for high temperature vacuum processing.
Porcelain
Mica
Aluminum oxide
Tantalum pentoxide
Ceramic
THE BASICS OF TANTALUM CAPACITORS
26
Most metals form crystalline oxides which are
non-protecting, such as rust on iron or black oxide on
copper. A few metals form dense, stable, tightly adhering,
electrically insulating oxides. These are the so-called
“valve”metals and include titanium, zirconium, niobium,
tantalum, hafnium, and aluminum. Only a few of these
permit the accurate control of oxide thickness by
electrochemical means. Of these, the most valuable for the
electronics industry are aluminum and tantalum.
Capacitors are basic to all kinds of electrical equipment,
from radios and television sets to missile controls and
automobile ignitions. Their function is to store an electrical
charge for later use.
12 to 400K
In the tantalum electrolytic capacitor, the distance between
the plates is very small since it is only the thickness of the
tantalum pentoxide film. As the dielectric constant of the
tantalum pentoxide is high, the capacitance of a tantalum
capacitor is high if the area of the plates is large:
eA
t
------
C =
where
C = capacitance
Capacitors consist of two conducting surfaces, usually
metal plates, whose function is to conduct electricity. They
are separated by an insulating material or dielectric. The
dielectric used in all tantalum electrolytic capacitors is
tantalum pentoxide.
Tantalum pentoxide compound possesses high-dielectric
strength and a high-dielectric constant. As capacitors are
being manufactured, a film of tantalum pentoxide is applied
to their electrodes by means of an electrolytic process. The
film is applied in various thicknesses and at various voltages
and although transparent to begin with, it takes on different
colors as light refracts through it. This coloring occurs on the
tantalum electrodes of all types of tantalum capacitors.
e = dielectric constant
A = surface area of the dielectric
t = thickness of the dielectric
Tantalum capacitors contain either liquid or solid
electrolytes. In solid electrolyte capacitors, a dry material
(manganese dioxide) forms the cathode plate. A tantalum
lead is embedded in or welded to the pellet, which is in turn
connected to a termination or lead wire. The drawings show
the construction details of the surface mount types of
tantalum capacitors shown in this catalog.
Revision: 29-Apr-2021
Document Number: 40074
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Molded Guide
Vishay Sprague
www.vishay.com
SOLID ELECTROLYTE TANTALUM CAPACITORS
TANTALUM CAPACITORS FOR ALL DESIGN
CONSIDERATIONS
Solid electrolyte capacitors contain manganese dioxide,
which is formed on the tantalum pentoxide dielectric layer
by impregnating the pellet with a solution of manganous
nitrate. The pellet is then heated in an oven, and the
manganous nitrate is converted to manganese dioxide.
Solid electrolyte designs are the least expensive for a given
rating and are used in many applications where their very
small size for a given unit of capacitance is of importance.
They will typically withstand up to about 10 % of the rated
DC working voltage in a reverse direction. Also important
are their good low temperature performance characteristics
and freedom from corrosive electrolytes.
The pellet is next coated with graphite, followed by a layer
of metallic silver, which provides a conductive surface
between the pellet and the leadframe.
Vishay Sprague patented the original solid electrolyte
capacitors and was the first to market them in 1956. Vishay
Sprague has the broadest line of tantalum capacitors and
has continued its position of leadership in this field. Data
sheets covering the various types and styles of Vishay
Sprague capacitors for consumer and entertainment
electronics, industry, and military applications are available
where detailed performance characteristics must be
specified.
Molded Chip tantalum capacitor encases the element in
plastic resins, such as epoxy materials. The molding
compound has been selected to meet the requirements of
UL 94 V-0 and outgassing requirements of ASTM E-595.
After assembly, the capacitors are tested and inspected to
assure long life and reliability. It offers excellent reliability
and high stability for consumer and commercial electronics
with the added feature of low cost
Surface mount designs of “Solid Tantalum” capacitors use
lead frames or lead frameless designs as shown in the
accompanying drawings.
MOLDED CHIP CAPACITOR
Epoxy
Encapsulation
Silver
Adhesive
Anode
Polarity Bar
MnO2/Carbon/
Silver Coating
Solderable Anode
Solderable
Cathode
Leadframe
Termination
Sintered
Tantalum
Termination
Revision: 29-Apr-2021
Document Number: 40074
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Molded Guide
Vishay Sprague
www.vishay.com
COMMERCIAL PRODUCTS
SOLID TANTALUM CAPACITORS - MOLDED CASE
793DX-CTC3-
SERIES
293D
593D
TR3
TP3
TL3
CTC4
PRODUCT IMAGE
TYPE
Surface mount TANTAMOUNT™, molded case
Standard
industrial grade
High performance,
automotive grade
FEATURES
CECC approved
Low ESR
Low ESR
Very low DCL
TEMPERATURE
RANGE
-55 °C to +125 °C
CAPACITANCE
RANGE
0.1 μF to 470
μF
0.1 μF to 1000 μF 0.1 μF to 100 μF
1 μF to 470 μF
4 V to 50 V
0.47 μF to 1000 μF 0.1 μF to 470 μF
VOLTAGE RANGE
4 V to 75 V
4 V to 50 V
4 V to 75 V
4 V to 50 V
4 V to 50 V
CAPACITANCE
TOLERANCE
10 %, 20 %
0.005 CV or
0.25 ꢀA,
whichever is
greater
LEAKAGE
CURRENT
0.01 CV or 0.5 ꢀA, whichever is greater
DISSIPATION
FACTOR
CASE CODES
TERMINATION
4 % to 30 %
A, B, C, D, E
4 % to 6 %
A, B, C, D
4 % to 15 %
A, B, C, D, E
4 % to 30 %
A, B, C, D, E, W
4 % to 15 %
A, B, C, D, E
4 % to 15 %
A, B, C, D, E
100 % matte tin standard, tin / lead available
SOLID TANTALUM CAPACITORS - MOLDED CASE
SERIES
TH3
TH4
TH5
PRODUCT IMAGE
TYPE
Surface mount TANTAMOUNT™, molded case
High temperature +150 °C,
automotive grade
High temperature +175 °C,
automotive grade
FEATURES
Very high temperature +200 °C
-55 °C to +200 °C
TEMPERATURE
RANGE
-55 °C to +150 °C
-55 °C to +175 °C
CAPACITANCE
RANGE
VOLTAGE RANGE
0.33 μF to 220 μF
6.3 V to 50 V
10 μF to 100 μF
6.3 V to 35 V
4.7 μF to 100 μF
5 V to 24 V
CAPACITANCE
TOLERANCE
10 %, 20 %
LEAKAGE
CURRENT
0.01 CV or 0.5 ꢀA, whichever is greater
DISSIPATION
FACTOR
4 % to 8 %
A, B, C, D, E
4.5 % to 8 %
B, C, D, E
6 % to 10 %
D, E
CASE CODES
100 % matte tin standard,
tin / lead and gold plated available
TERMINATION
100 % matte tin
Gold plated
Revision: 29-Apr-2021
Document Number: 40074
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Molded Guide
Vishay Sprague
www.vishay.com
HIGH RELIABILITY PRODUCTS
SOLID TANTALUM CAPACITORS - MOLDED CASE
SERIES
TM3
T83
CWR11
95158
PRODUCT
IMAGE
TANTAMOUNT™,
molded case,
hi-rel. COTS
TANTAMOUNT™,
molded case, hi-rel.
TANTAMOUNT™, molded case,
DLA approved
TYPE
High reliability,
for medical Instruments
High reliability,
standard and low ESR
FEATURES
MIL-PRF-55365/8 qualified
Low ESR
TEMPERATURE
RANGE
-55 °C to +125 °C
CAPACITANCE
1 μF to 220 μF
4 V to 20 V
0.1 μF to 470 μF
4 V to 63 V
0.1 μF to 100 μF
4.7 μF to 220 μF
10 %, 20 %
RANGE
VOLTAGE RANGE
4 V to 50 V
CAPACITANCE
TOLERANCE
10 %, 20 %
5 %, 10 %, 20 %
LEAKAGE
CURRENT
0.005 CV or 0.25 μA,
whichever is greater
0.01 CV or 0.5 ꢀA, whichever is greater
DISSIPATION
4 % to 8 %
A, B, C, D, E
4 % to 15 %
A, B, C, D, E
4 % to 6 %
A, B, C, D
4 % to 12 %
C, D, E
FACTOR
CASE CODES
TERMINATION
100 % matte tin;
tin / lead;
tin / lead solder fused
100 % matte tin;
tin / lead
Tin / lead;
tin / lead solder fused
Tin / lead solder plated;
gold plated
Revision: 29-Apr-2021
Document Number: 40074
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Molded Guide
Vishay Sprague
www.vishay.com
PLASTIC TAPE AND REEL PACKAGING in inches [millimeters]
0.157 0.004
[4.0 0.10]
10 pitches cumulative
tolerance on tape
0.008 [0.200]
Tape thickness
0.014
[0.35]
MAX.
Deformation
between
embossments
0.059 + 0.004 - 0.0
[1.5 + 0.10 - 0.0]
0.069 0.004
[1.75 0.10]
0.079 0.002
Embossment
[2.0 0.05]
Top
cover
tape
A0
20°
0.030 [0.75]
MIN. (Note 3)
F
W
Maximum
component
rotation
B1 MAX.
(Note 6)
K0
B0
Top
0.030 [0.75]
cover
tape
MIN. (Note 4)
(Side or front sectional view)
0.004 [0.1]
MAX.
Center lines
of cavity
P1
For tape feeder
reference only
including draft.
Concentric around B
(Note 5)
D
1 MIN. for components
0.079 x 0.047 [2.0 x 1.2] and larger.
(Note 5)
USER DIRECTION OF FEED
Maximum
cavity size
(Note 1)
0
Cathode (-)
Anode (+)
Direction of Feed
Tape and Reel Specifications: all case sizes are available
on plastic embossed tape per EIA-481. Standard reel
diameter is 7" [178 mm], 13" [330 mm] reels are available and
recommended as the most cost effective packaging method.
3.937 [100.0]
0.039 [1.0]
MAX.
20° maximum
component rotation
Typical
component
cavity
Tape
B0
0.039 [1.0]
MAX.
center line
The most efficient packaging quantities are full reel
increments on a given reel diameter. The quantities shown
allow for the sealed empty pockets required to be in
conformance with EIA-481. Reel size and packaging
orientation must be specified in the Vishay Sprague part
number.
0.9843 [250.0]
Typical
component
center line
Camber
(top view)
A0
Allowable camber to be 0.039/3.937 [1/100]
non-cumulative over 9.843 [250.0]
(Top view)
Notes
•
(1)
Metric dimensions will govern. Dimensions in inches are rounded and for reference only
A0, B0, K0, are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent
rotation of the component within the cavity of not more than 20°
(2)
(3)
(4)
(5)
(6)
Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide
“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum
This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed
cavities or to the edge of the cavity whichever is less
This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier
tape between the embossed cavity or to the edge of the cavity whichever is less
The embossed hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location shall be applied independent of each other
B1 dimension is a reference dimension tape feeder clearance only
CASE
CODE
TAPE
SIZE
B1
(MAX.)
D1
(MIN.)
K0
(MAX.)
F
P1
W
MOLDED CHIP CAPACITORS; ALL TYPES
A
B
C
D
E
0.165
[4.2]
0.039
[1.0]
0.138 0.002
[3.5 0.05]
0.094
[2.4]
0.157 0.004
[4.0 1.0]
0.315 0.012
[8.0 0.30]
8 mm
0.32
[8.2]
0.059
[1.5]
0.217 0.00
[5.5 0.05]
0.177
[4.5]
0.315 0.004
[8.0 1.0]
0.472 0.012
[12.0 0.30]
12 mm
W
Revision: 29-Apr-2021
Document Number: 40074
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Molded Guide
Vishay Sprague
www.vishay.com
RECOMMENDED REFLOW PROFILES
Capacitors should withstand reflow profile as per J-STD-020 standard, three cycles.
Tp
TC - 5 °C
tp
Max. ramp-up rate = 3 °C/s
Max. ramp-down rate = 6 °C/s
TL
tL
Ts max.
Preheat area
Ts min.
ts
25
Time 25 °C to peak
TIME (s)
PROFILE FEATURE
Preheat / soak
SnPb EUTECTIC ASSEMBLY
LEAD (Pb)-FREE ASSEMBLY
Temperature min. (Ts min.
)
100 °C
150 °C
150 °C
200 °C
Temperature max. (Ts max.
)
Time (ts) from (Ts min. to Ts max.
Ramp-up
)
60 s to 120 s
60 s to 120 s
Ramp-up rate (TL to Tp)
Liquidus temperature (TL)
Time (tL) maintained above TL
3 °C/s max.
183 °C
3 °C/s max.
217 °C
60 s to 150 s
60 s to 150 s
Peak package body temperature (Tp)
Depends on case size - see table below
Time (tp) within 5 °C of the specified
classification temperature (TC)
20 s
30 s
Time 25 °C to peak temperature
Ramp-down
6 min max.
8 min max.
Ramp-down rate (Tp to TL)
6 °C/s max.
6 °C/s max.
PEAK PACKAGE BODY TEMPERATURE (Tp)
PEAK PACKAGE BODY TEMPERATURE (Tp)
CASE CODE
SnPb EUTECTIC PROCESS
235 °C
LEAD (Pb)-FREE PROCESS
260 °C
250 °C
A, B, C
D, E, W
220 °C
PAD DIMENSIONS in inches [millimeters]
D
C
B
A
A
B
C
D
CASE CODE
(MIN.)
(NOM.)
(NOM.)
(NOM.)
MOLDED CHIP CAPACITORS, ALL TYPES
A
B
C
D
E
0.071 [1.80]
0.118 [3.00]
0.118 [3.00]
0.157 [4.00]
0.157 [4.00]
0.185 [4.70]
0.067 [1.70]
0.071 [1.80]
0.094 [2.40]
0.098 [2.50]
0.098 [2.50]
0.098 [2.50]
0.053 [1.35]
0.065 [1.65]
0.118 [3.00]
0.150 [3.80]
0.150 [3.80]
0.150 [3.80]
0.187 [4.75]
0.207 [5.25]
0.307 [7.80]
0.346 [8.80]
0.346 [8.80]
0.346 [8.80]
W
Revision: 29-Apr-2021
Document Number: 40074
6
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Molded Guide
Vishay Sprague
www.vishay.com
GUIDE TO APPLICATION
1.
AC Ripple Current: the maximum allowable ripple
current shall be determined from the formula:
be established when calculating permissible
operating levels. (Power dissipation calculated using
+25 °C temperature rise).
P
RESR
IRMS
=
------------
6.
Printed Circuit Board Materials: molded capacitors
are compatible with commonly used printed circuit
board materials (alumina substrates, FR4, FR5, G10,
PTFE-fluorocarbon and porcelanized steel).
where,
P =
power dissipation in W at +25 °C as given in
the tables in the product datasheets (Power
Dissipation).
7.
Attachment:
7.1
Solder Paste: the recommended thickness of the
RESR = the capacitor equivalent series resistance at
the specified frequency
solder paste after application is 0.007"
0.001"
[0.178 mm 0.025 mm]. Care should be exercised in
selecting the solder paste. The metal purity should be
as high as practical. The flux (in the paste) must be
active enough to remove the oxides formed on the
metallization prior to the exposure to soldering heat. In
practice this can be aided by extending the solder
preheat time at temperatures below the liquidous
state of the solder.
2.
AC Ripple Voltage: the maximum allowable ripple
voltage shall be determined from the formula:
VRMS = IRMS x Z
or, from the formula:
P
7.2
Soldering: capacitors can be attached by
conventional soldering techniques; vapor phase,
convection reflow, infrared reflow, wave soldering,
and hot plate methods. The soldering profile charts
show recommended time / temperature conditions
for soldering. Preheating is recommended. The
recommended maximum ramp rate is 2 °C per s.
VRMS = Z ------------
RESR
where,
P =
power dissipation in W at +25 °C as given in
the tables in the product datasheets (Power
Dissipation).
Attachment with
a
soldering iron is not
RESR = the capacitor equivalent series resistance at
the specified frequency
recommended due to the difficulty of controlling
temperature and time at temperature. The soldering
iron must never come in contact with the capacitor.
For details see www.vishay.com/doc?40214.
Z =
the capacitor impedance at the specified
frequency
2.1
2.2
The sum of the peak AC voltage plus the applied DC
voltage shall not exceed the DC voltage rating of the
capacitor.
The sum of the negative peak AC voltage plus the
applied DC voltage shall not allow a voltage reversal
exceeding 10 % of the DC working voltage at
+25 °C.
7.2.1 Backward and Forward Compatibility: capacitors
with SnPb or 100 % tin termination finishes can be
soldered using SnPb or lead (Pb)-free soldering
processes.
8.
Cleaning (Flux Removal) After Soldering: molded
capacitors are compatible with all commonly used
solvents such as TES, TMS, Prelete, Chlorethane,
Terpene and aqueous cleaning media. However,
CFC / ODS products are not used in the production
of these devices and are not recommended.
Solvents containing methylene chloride or other
epoxy solvents should be avoided since these will
attack the epoxy encapsulation material.
3.
4.
Reverse Voltage: solid tantalum capacitors are not
intended for use with reverse voltage applied.
However, they have been shown to be capable of
withstanding momentary reverse voltage peaks of up
to 10 % of the DC rating at 25 °C and 5 % of the DC
rating at +85 °C.
8.1
9.
When using ultrasonic cleaning, the board may
resonate if the output power is too high. This
vibration can cause cracking or a decrease in the
adherence of the termination. DO NOT EXCEED 9W/l
at 40 kHz for 2 min.
Temperature Derating: if these capacitors are to be
operated at temperatures above +25 °C, the
permissible RMS ripple current shall be calculated
using the derating factors as shown:
TEMPERATURE (°C)
DERATING FACTOR
Recommended Mounting Pad Geometries: proper
mounting pad geometries are essential for
successful solder connections. These dimensions
are highly process sensitive and should be designed
to minimize component rework due to unacceptable
solder joints. The dimensional configurations shown
are the recommended pad geometries for both wave
and reflow soldering techniques. These dimensions
are intended to be a starting point for circuit board
designers and may be fine tuned if necessary based
upon the peculiarities of the soldering process and /
or circuit board design.
+25
+85
+125
+150 (1)
+175 (1)
+200 (1)
1.0
0.9
0.4
0.3
0.2
0.1
Note
(1) Applicable for dedicated high temperature product series
5.
Power Dissipation: power dissipation will be
affected by the heat sinking capability of the
mounting surface. Non-sinusoidal ripple current may
produce heating effects which differ from those
shown. It is important that the equivalent IRMS value
Revision: 29-Apr-2021
Document Number: 40074
7
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Typical Performance Characteristics
www.vishay.com
Vishay Sprague
Molded Chip Tantalum Capacitors, Automotive Grade
ELECTRICAL PERFORMANCE CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
-55 °C to +85 °C
Category temperature range
(to +125 °C / +150 °C / +175 °C with voltage derating - refer to graph “Category Voltage vs. Temperature”) (1)
Capacitance tolerance
Dissipation factor
ESR
20 %, 10 %, tested via bridge method, at 25 °C, 120 Hz
Limits per Standard Ratings table. Tested via bridge method, at 25 °C, 120 Hz
Limits per Standard Ratings table. Tested via bridge method, at 25 °C, 100 kHz
Leakage current
After application of rated voltage applied to capacitors for 5 min using a steady source of power with 1 kΩ
resistor in series with the capacitor under test, leakage current at 25 °C is not more than 0.01 CV or 0.5 μA,
whichever is greater. Note that the leakage current varies with temperature and applied voltage. See graph
“Typical Leakage Current Temperature Factor” for the appropriate adjustment factor.
Capacitance change by
temperature
+30 % max. (at +175 °C)
+20 % max. (at +125 °C and +150 °C)
+10 % max. (at +85 °C)
-10 % max. (at -55 °C)
Reverse voltage
Ripple current
Capacitors are capable of withstanding peak voltages in the reverse direction equal to:
10 % of the DC rating at +25 °C
5 % of the DC rating at +85 °C
1 % of the DC rating at +125 °C
For maximum ripple current values (at 25 °C) refer to relevant datasheet. If capacitors are to be used at
temperatures above +25 °C, the permissible RMS ripple current (or voltage) shall be calculated using the
derating factors:
1.0 at +25 °C
0.9 at +85 °C
0.4 at +125 °C
0.3 at +150 °C
0.2 at +175 °C
Maximum operating
and surge voltages vs.
temperature
+85 °C
+125 °C
+150 °C / +175 °C
CATEGORY
VOLTAGE
(V)
CATEGORY
VOLTAGE
(V)
RATED VOLTAGE SURGE VOLTAGE
SURGE VOLTAGE
(V)
(V)
(V)
4
6.3
10
5.2
8
2.7
4
3.4
5
n/a
3
13
20
26
32
46
65
60
75
75
7
8
5
16
10
13
17
23
33
33
42
50
12
16
20
28
40
40
50
50
8
20
10
25
12.5
17.5
25
35
50
50 (2)
63
n/a
n/a
n/a
75 (3)
Notes
•
All information presented in this document reflects typical performance characteristics
Series TH3 - up to 150 °C; TH4 - up to 175 °C
Capacitance value 15 μF and higher
(1)
(2)
(3)
For 293D and TR3 only
Revision: 22-Jul-2020
Document Number: 40215
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Typical Performance Characteristics
www.vishay.com
Vishay Sprague
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below +85 °C)
VOLTAGE RAIL
CAPACITOR VOLTAGE RATING
≤ 3.3
5
6.3
10
10
20
12
25
15
35
≥ 24
50 or series configuration
Notes
•
For temperatures above +85 °C the same voltage derating ratio is recommended, but with respect to category voltage.
Up to +85 °C: category voltage = rated voltage
At +125 °C: category voltage = 2/3 of rated voltage
At 150 °C / 175 °C: category voltage = 1/2 of rated voltage
For more information about recommended voltage derating see: www.vishay.com/doc?40246
•
CATEGORY VOLTAGE VS. TEMPERATURE
Axis Title
10000
1.0
0.8
1000
0.6
0.4
100
0.2
0
10
-55
0
25
85
125
150
175
Temperature (°C)
Note
•
Below 85 °C category voltage is equal to rated voltage
TYPICAL LEAKAGE CURRENT FACTOR
Axis Title
100
10000
1000
100
10
+175 °C
+150 °C
+125 °C
1
85 °C
+55 °C
0.1
+25 °C
0.01
0 °C
-55 °C
0.001
10
0
10
20
30
40
50
60
70
80
90
100
Percent of Rated Voltage
Note
•
At +25 °C, the leakage current shall not exceed the value listed in the Standard Ratings table.
At +85 °C, the leakage current shall not exceed 10 times the value listed in the Standard Ratings table.
At +125 °C, the leakage current shall not exceed 12 times the value listed in the Standard Ratings table.
At +150 °C, the leakage current shall not exceed 15 times the value listed in the Standard Ratings table.
At +175 °C, the leakage current shall not exceed 18 times the value listed in the Standard Ratings table
Revision: 22-Jul-2020
Document Number: 40215
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Typical Performance Characteristics
www.vishay.com
Vishay Sprague
ENVIRONMENTAL PERFORMANCE CHARACTERISTICS
ITEM
CONDITION
POST TEST PERFORMANCE
High temperature
exposure (storage)
MIL-STD-202, method 108
1000 h, at maximum rated temperature,
unpowered
Capacitance change
Dissipation factor
Leakage current
ESR
Within 20 % of initial value
Initial specified limit
Initial specified limit
Initial specified limit
Operational life test
at +125 °C
AEC-Q200
1000 h application 2/3 of rated voltage
Capacitance change
Dissipation factor
Leakage current
ESR
Within 20 % of initial value
Initial specified limit
Shall not exceed 10 times the initial limit
Initial specified limit
Operational life test
at +150 °C (for TH3)
and at +175 °C
(for TH4)
AEC-Q200
1000 h application 1/2 of rated voltage
Capacitance change
Dissipation factor
Leakage current
ESR
Within 20 % of initial value
Shall not exceed 3 times the initial limit
Shall not exceed 10 times the initial limit
Shall not exceed 3 times the initial limit
Surge voltage
MIL-PRF-55365:
Capacitance change
Dissipation factor
Leakage current
ESR
Within 30 % of initial value
1000 successive test cycles at 85 °C of surge
voltage (as specified in the table above), in
series with a 33 Ω resistor at the rate of
30 s ON, 30 s OFF
Shall not exceed 1.5 times the initial limit
Shall not exceed 2 times the initial limit
Shall not exceed 1.5 times the initial limit
Biased humidity test AEC-Q200
At 85 °C / 85 % RH, 1000 h,
Capacitance change
Dissipation factor
Leakage current
ESR
Within 20 % of initial value
Shall not exceed 3 times the initial limit
Shall not exceed 10 times the initial limit
Shall not exceed 3 times the initial limit
with rated voltage applied
Temperature cycling AEC-Q200 / JESD22, method JA-104
-55 °C / +125 °C, for 1000 cycles
Capacitance change
Dissipation factor
Leakage current
ESR
Within 20 % of initial value
Initial specified limit
Initial specified limit
Initial specified limit
MECHANICAL PERFORMANCE CHARACTERISTICS
ITEM
CONDITION
POST TEST PERFORMANCE
Vibration
MIL-STD-202, method 204: 10 Hz to 2000 Hz, 5 g
peak for 20 min, 12 cycles each of 3 orientations
(total 36 cycles), at rated voltage
Capacitance change
Dissipation factor
Leakage current
Within 20 % of initial value
Initial specified limit
Initial specified limit
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Mechanical shock
MIL-STD-202, method 213, condition F, 1500 g peak,
0.5 ms, half-sine
Capacitance change
Dissipation factor
Leakage current
Within 20 % of initial value
Initial specified limit
Initial specified limit
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Resistance
to solder heat
MIL-STD-202, method 210, condition D
Solder dip 260 °C 5 °C, 10 s
Capacitance change
Dissipation factor
Leakage current
Within 20 % of initial value
Initial specified limit
Initial specified limit
Resistance to
solvents
MIL-STD-202, method 215
Capacitance change
Dissipation factor
Leakage current
Within 20 % of initial value
Initial specified limit
Initial specified limit
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Body marking shall remain legible.
Solderability
AEC-Q200 / J-STD-002
Electrical test not required
Terminal strength /
Shear force test
AEC-Q200-006
Part should not be sheared off the pads and no body
cracking post-conditioning. Electrical test not required.
Apply a pressure load of 17.7 N (1.8 kg) for 60 s
horizontally to the center of capacitor side body
Exception: for case size 0603 pressure load is 5N
Flammability
Encapsulation materials meet UL 94 V-0 with an
oxygen index of 32 %
n/a
Revision: 22-Jul-2020
Document Number: 40215
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明