首页 |元器件品牌

TMPG06-10HE3_A/C [VISHAY]

Trans Voltage Suppressor Diode;
TMPG06-10HE3_A/C
型号： TMPG06-10HE3_A/C
厂家： VISHAY    VISHAY
描述：

Trans Voltage Suppressor Diode
文件： 总5页 (文件大小：80K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
TMPG06-10 thru TMPG06-43A  
www.vishay.com  
Vishay General Semiconductor  
PAR® Transient Voltage Suppressors  
High Temperature Stability and High Reliability Conditions  
FEATURES  
• Available in uni-directional polarity only  
• 400 W peak pulse power capability with a  
10/1000 μs waveform, repetitive rate (duty cycle):  
0.01 %  
• Excellent clamping capability  
• Very fast response time  
MPG06  
• Low incremental resistance  
• Solder dip 275 °C max. 10 s, per JESD 22-B106  
• AEC-Q101 qualified  
• Material categorization: for definitions of compliance  
please see www.vishay.com/doc?99912  
APPLICATIONS  
Use in sensitive electronics protection against voltage  
PRIMARY CHARACTERISTICS  
transients induced by inductive load switching and lighting  
on ICs, MOSFET, signal lines of sensor units for consumer,  
computer, industrial, automotive, and telecommunication.  
VBR  
10 V to 43 V  
8.10 V to 36.8 V  
400 W  
VWM  
PPPM  
PD  
1.0 W  
MECHANICAL DATA  
IFSM  
40 A  
Case: MPG06, molded epoxy over passivated junction  
Molding compound meets UL 94 V-0 flammability rating  
TJ max.  
Polarity  
Package  
185 °C  
Uni-directional  
MPG06  
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified  
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified  
(“X” denotes revision code e.g. A, B, ..., revision code only  
applicable for part number with 5 % tolerance)  
Terminals: matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
HE3 suffix meets JESD 201 class 2 whisker test  
Polarity: color band denotes cathode end  
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)  
PARAMETER  
SYMBOL  
PPPM  
IPPM  
VALUE  
UNIT  
W
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)  
Peak pulse current with a 10/1000 μs waveform (1)(2) (fig. 3)  
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)  
Peak forward surge current 8.3 ms single half sine-wave (2)  
Maximum instantaneous forward voltage at 25 A (2)  
Operating junction and storage temperature range  
400  
See next table  
1.0  
A
PD  
W
IFSM  
40  
A
VF  
3.5  
V
TJ, TSTG  
-65 to +185  
°C  
Notes  
(1)  
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2  
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum  
(2)  
Revision: 22-Jul-16  
Document Number: 88404  
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
TMPG06-10 thru TMPG06-43A  
www.vishay.com  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
BREAKDOWN  
VOLTAGE  
MAXIMUM  
MAXIMUM  
PEAK  
TEST  
CURREN  
T
REVERSE  
LEAKAGE  
AT VWM  
TJ = 150 °C  
(μA)  
MAXIMUM  
MAXIMUM  
STAND-OFF REVERSE  
CLAMPING TEMPERATURE  
(1)  
VBR AT IT  
VOLTAGE  
VWM  
LEAKAGE  
AT VWM  
ID  
PULSE  
DEVICE TYPE  
VOLTAGE  
AT IPPM  
VC (V)  
COEFFICIENT  
OF VBR  
(V)  
CURRENT  
IT  
(2)  
(V)  
IPPM  
(mA)  
(%/°C)  
MIN.  
MAX.  
(μA)  
(A)  
26.7  
27.6  
24.7  
25.6  
23.1  
24.0  
21.1  
22.0  
18.2  
18.9  
17.0  
17.8  
15.1  
15.9  
13.7  
14.4  
12.5  
13.1  
11.5  
12.0  
10.2  
10.7  
9.2  
TMPG06-10  
TMPG06-10A  
TMPG06-11  
TMPG06-11A  
TMPG06-12  
TMPG06-12A  
TMPG06-13  
TMPG06-13A  
TMPG06-15  
TMPG06-15A  
TMPG06-16  
TMPG06-16A  
TMPG06-18  
TMPG06-18A  
TMPG06-20  
TMPG06-20A  
TMPG06-22  
TMPG06-22A  
TMPG06-24  
TMPG06-24A  
TMPG06-27  
TMPG06-27A  
TMPG06-30  
TMPG06-30A  
TMPG06-33  
TMPG06-33A  
TMPG06-36  
TMPG06-36A  
TMPG06-39  
TMPG06-39A  
TMPG06-43  
TMPG06-43A  
9.00  
9.50  
9.90  
10.5  
10.8  
11.4  
11.7  
12.4  
13.5  
14.3  
14.4  
15.2  
16.2  
17.1  
18.0  
19.0  
19.8  
20.9  
21.6  
22.8  
24.3  
25.7  
27.0  
28.5  
29.7  
31.4  
32.4  
34.2  
35.1  
37.1  
38.7  
40.9  
11.0  
10.5  
12.1  
11.6  
13.2  
12.6  
14.3  
13.7  
16.3  
15.8  
17.6  
16.8  
19.8  
18.9  
22.0  
21.0  
24.2  
23.1  
26.4  
25.2  
29.7  
28.4  
33.0  
31.5  
36.3  
34.7  
39.6  
37.8  
42.9  
41.0  
47.3  
45.2  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
8.10  
8.55  
8.92  
9.40  
9.72  
10.2  
10.5  
11.1  
12.1  
12.8  
12.9  
13.6  
14.5  
15.3  
16.2  
17.0  
17.8  
18.8  
19.4  
20.5  
21.8  
23.1  
24.3  
25.6  
26.8  
28.2  
29.1  
30.8  
31.6  
33.3  
34.8  
36.8  
5.0  
5.0  
2.0  
2.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
20.0  
20.0  
10.0  
10.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
15.0  
14.5  
16.2  
15.6  
17.3  
16.7  
19.0  
18.2  
22.0  
21.2  
23.5  
22.5  
26.5  
25.5  
29.1  
27.7  
31.9  
30.6  
34.2  
33.2  
39.1  
37.5  
43.5  
41.4  
47.7  
45.7  
52.0  
49.9  
56.4  
53.9  
61.9  
59.3  
0.073  
0.073  
0.075  
0.075  
0.076  
0.078  
0.081  
0.081  
0.084  
0.084  
0.086  
0.086  
0.088  
0.088  
0.090  
0.090  
0.092  
0.092  
0.094  
0.094  
0.096  
0.096  
0.097  
0.097  
0.098  
0.098  
0.099  
0.099  
0.100  
0.100  
0.101  
0.101  
9.7  
8.4  
8.8  
7.7  
8.0  
7.1  
7.4  
6.5  
6.7  
Notes  
(1)  
(2)  
(3)  
Pulse test: tp 50 ms  
Surge current waveform per fig. 3 and derated per fig. 2  
All terms and symbols are consistent with ANSI/IEEE CA62.35  
ORDERING INFORMATION (Example)  
PREFERRED PIN  
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY  
DELIVERY MODE  
TMPG06-10AHE3/54 (1)  
TMPG06-10AHE3_A/C (1)  
0.218  
0.218  
54  
C
5500  
5500  
13" diameter paper tape and reel  
13" diameter paper tape and reel  
Note  
(1)  
AEC-Q101 qualified  
Revision: 22-Jul-16  
Document Number: 88404  
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
TMPG06-10 thru TMPG06-43A  
www.vishay.com  
Vishay General Semiconductor  
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)  
100  
10 000  
1000  
100  
Non-Repetitive Pulse  
Waveform shown in Fig. 3  
TA = 25 °C  
TJ = 25 °C  
f = 1.0 MHz  
Vsig = 50 mVp-p  
Measured at  
Zero Bias  
10  
TMPG06-10 - TMPG06-43A  
1.0  
0.1  
Measured at Stand-Off  
Voltage VWM  
10  
0.1 µs  
1.0 µs  
10 µs  
100 µs  
1.0 ms  
10 ms  
10  
100  
200  
100  
td - Pulse Width (s)  
VBR - Breakdown Voltage (V)  
Fig. 1 - Peak Pulse Power Rating Curve  
Fig. 4 - Typical Junction Capacitance  
100  
1.00  
60 Hz  
Resistive or  
Inductive Load  
75  
50  
0.75  
0.50  
L = 0.375" (9.5 mm)  
Lead Lengths  
25  
0
0.25  
0
0
25  
50  
75  
100  
125 150 175  
0
25  
50  
75  
100  
125  
150 175  
200  
TL - Lead Temperature (°C)  
TJ - Initial Temperature (°C)  
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature  
Fig. 5 - Power Derating Curve  
150  
100  
TJ = 25 °C  
Pulse Width (td)  
TJ = 75 °C  
8.3 ms Single Half Sine-Wave  
tr = 10 µs  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
Peak Value  
IPPM  
100  
50  
0
Half Value -  
IPPM  
IPP  
2
10/1000 µs Waveform  
as defined by R.E.A.  
td  
10  
1.0  
3.0  
4.0  
0
2.0  
1
10  
t - Time (ms)  
Number of Cycles at 60 Hz  
Fig. 3 - Pulse Waveform  
Fig. 6 - Maximum Non-Repetitive Forward Surge Current  
Revision: 22-Jul-16  
Document Number: 88404  
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
TMPG06-10 thru TMPG06-43A  
www.vishay.com  
Vishay General Semiconductor  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
MPG06  
1.0 (25.4)  
MIN.  
0.100 (2.54)  
0.090 (2.29)  
DIA.  
0.125 (3.18)  
0.115 (2.92)  
1.0 (25.4)  
MIN.  
0.026 (0.66)  
0.023 (0.584)  
DIA.  
Revision: 22-Jul-16  
Document Number: 88404  
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of  
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding  
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a  
particular product with the properties described in the product specification is suitable for use in a particular application.  
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over  
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.  
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for  
such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document  
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Revision: 13-Jun-16  
Document Number: 91000  
1

相关型号：

TMPG06-11

 AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR
VISHAY

TMPG06-11

 Automotive Transient Voltage Suppressors
TAYCHIPST

TMPG06-11-3-E3

 DIODE 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, MPG06, 2 PIN, Transient Suppressor
VISHAY

TMPG06-11-E3

 Trans Voltage Suppressor Diode, 400W, 8.92V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, MPG06, 2 PIN
VISHAY

TMPG06-11-E3/1

 DIODE 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, MPG06, 2 PIN, Transient Suppressor
VISHAY

TMPG06-11-E3/23

 DIODE 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, MPG06, 2 PIN, Transient Suppressor
VISHAY

TMPG06-11-E3/4

 DIODE 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, MPG06, 2 PIN, Transient Suppressor
VISHAY

TMPG06-11-E3/50

 DIODE 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, MPG06, 2 PIN, Transient Suppressor
VISHAY

TMPG06-11-E3/54

 TVS SGL UNI-DIR 8.92V 400W 2PIN CASE MPG06 - Tape and Reel
VISHAY

TMPG06-11/1-E3

 DIODE 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, MPG06, 2 PIN, Transient Suppressor
VISHAY

TMPG06-11/4

 Trans Voltage Suppressor Diode, 400W, 8.92V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, MPG06, 2 PIN
VISHAY

TMPG06-11A

 AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR
VISHAY
©2020 ICPDF网 联系我们和版权申明