TPC13CA [VISHAY]

Surface Mount PAR Transient Voltage Suppressors Bi-directional 1500 W TVS in TO-277 (SMPC) Package;


型号：	TPC13CA
厂家：	VISHAY
描述：	Surface Mount PAR Transient Voltage Suppressors Bi-directional 1500 W TVS in TO-277 (SMPC) Package PC 电视
文件：	总5页 (文件大小：88K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TPC11CA thru TPC36CA

Vishay General Semiconductor

www.vishay.com

Surface Mount PAR^®Transient Voltage Suppressors

Bi-directional 1500 W TVS in TO-277 (SMPC) Package

FEATURES

• Junction passivation optimized PAR^®design

eSMP^®Series

• T_J= 185 °C capability suitable for high reliability

and automotive requirement

• Very low profile - typical height of 1.1 mm

• Ideal for automated placement

• Bi-direction only

• Excellent clamping capability

• Low leakage current

• Very fast response time

TO-277A (SMPC)

• AEC-Q101 qualified available

- Automotive ordering code: base P/NHM3

Terminal 1

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

Terminal 2

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

PRIMARY CHARACTERISTICS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for automotive,

consumer, computer, industrial, and telecommunication.

V_WM

_BR(Bi-directional)

P_PPM

10.5 V to 37.8 V

11 V to 36 V

1500 W

T_Jmax.

185 °C

MECHANICAL DATA

Polarity

Bi-directional

TO-277A (SMPC)

Case: TO-277A (SMPC)

Molding compound meets UL 94 V-0 flammability rating

Package

Note

Base P/NHM3

AEC-Q101 qualified

- halogen-free, RoHS-compliant, and

•

All electrical characteristics are only applicable when two

identical polarity terminals are connected.

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

HM3 suffix meets JESD 201 class 2 whisker test

Polarity: no marking on bi-directional types

MAXIMUM RATINGS (T_A= 25 °C, unless otherwise noted)

PARAMETER

SYMBOL

P_PPM

VALUE

1500

UNIT

Peak power dissipation with a 10/1000 μs waveform ⁽¹⁾

Peak pulse current with a 10/1000 μs waveform ⁽¹⁾

Operating junction and storage temperature range

I_PPM

See next table

-65 to +185

T_J, T_STG

°C

Note

(1)

Non-repetitive current pulse per fig.3 and derated above T_A= 25 °C

Revision: 09-Sep-16

Document Number: 87649

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TPC11CA thru TPC36CA

Vishay General Semiconductor

www.vishay.com

ELECTRICAL CHARACTERISTICS (T_A= 25 °C, unless otherwise noted)

MAXIMUM

PEAK PULSE

SURGE

MAXIMUM

CLAMPING

VOLTAGE

AT I_PPM

V_C

DEVICE

MARKING

CODE

TEST

CURRENT

I_T

STAND-OFF

VOLTAGE

V_WM

REVERSE

LEAKAGE

AT V_WM

I_D

BREAKDOWN

VOLTAGE

V_BR⁽¹⁾AT I_T

(V)

DEVICE

TYPE

CURRENT

(2)

(mA)

(V)

I_PPM

(μA)

(A)

(V)

MIN.

10.5

11.4

12.4

14.3

15.2

17.1

19.0

20.9

22.8

25.7

28.5

31.4

34.2

MAX.

11.6

12.6

13.7

15.8

16.8

18.9

21.0

23.1

25.2

28.4

31.5

34.7

37.8

TPC11CA

TPC12CA

TPC13CA

TPC15CA

TPC16CA

TPC18CA

TPC20CA

TPC22CA

TPC24CA

TPC27CA

TPC30CA

TPC33CA

TPC36CA

BAF

BAG

BAH

BAI

1.0

9.40

10.2

11.1

12.8

13.6

15.3

17.1

18.8

20.5

23.1

25.6

28.2

30.8

5.0

2.0

1.0

96.2

89.8

82.4

70.8

66.7

59.5

54.2

49.0

45.2

40.0

36.2

32.8

30.1

15.6

16.7

18.2

21.2

22.5

25.2

27.7

30.6

33.2

37.5

41.4

45.7

49.9

BAJ

BAK

BAL

BAM

BAN

BAO

BAP

BAQ

BAR

Notes

•

All terms and symbols are consistent with ANSI/IEEE C62.35

V_BRmeasured after I_Tapplied for 300 μs, I_T= square wave pulse or equivalent

Surge current waveform per fig.3

(1)

(2)

ORDERING INFORMATION (Example)

PREFERRED P/N

TPC11CAHM3/H ⁽¹⁾

TPC11CAHM3/I ⁽¹⁾

UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY

DELIVERY MODE

0.10

1500

6500

7" diameter plastic tape and reel

13" diameter plastic tape and reel

Note

(1)

AEC-Q101 qualified

Revision: 09-Sep-16

Document Number: 87649

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TPC11CA thru TPC36CA

Vishay General Semiconductor

www.vishay.com

RATINGS AND CHARACTERISTICS CURVES (T_A= 25 °C, unless otherwise noted)

100

150

100

t_r= 10 μs

T_J= 25 °C

pulse width (t_d) is deﬁned

as the point where the peak

Peak value I_PPM

Half value - I_PP/2

I_PPM

10/1000 μs waveform

as deﬁned by R.E.A.

t_d

0.1

100

1000

10 000

0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0

t_d- Pulse Width (μs)

Fig. 1 - Peak Pulse Power Rating Curve

t_p- Time (ms)

Fig. 3 - Pulse Waveform

100

10 000

1000

100

Measured at zero bias

Measured at stand-off

voltage, V_WM

T_J= 25 °C

f = 1.0 MHz

100

125

150

175

100

T_J- Initial Temperature (°C)

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

V_BR- Breakdown Voltage (V)

Fig. 4 - Typical Junction Capacitance

Note

Fig.1 power calculation is based on I_PPM, times defined maximum clamping voltage by pulse width.

•

Revision: 09-Sep-16

Document Number: 87649

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TPC11CA thru TPC36CA

Vishay General Semiconductor

www.vishay.com

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

TO-277A (SMPC)

0.187 (4.75)

0.175 (4.45)

0.016 (0.40)

0.006 (0.15)

0.262 (6.65)

0.250 (6.35)

0.242 (6.15)

0.238 (6.05)

0.047 (1.20)

0.039 (1.00)

0.171 (4.35)

0.167 (4.25)

0.146 (3.70)

0.134 (3.40)

Mounting Pad Layout

0.087 (2.20)

0.075 (1.90)

0.189 (4.80)

MIN.

0.189 (4.80)

0.173 (4.40)

0.186 (4.72)

MIN.

0.268

(6.80)

0.155 (3.94)

NOM.

0.030 (0.75) NOM.

0.049 (1.24)

0.037 (0.94)

0.050 (1.27)

MIN.

0.084 (2.13) NOM.

0.053 (1.35)

0.041 (1.05)

0.041

(1.04)

0.055 (1.40)

MIN.

Conform to JEDEC^®TO-277A

Revision: 09-Sep-16

Document Number: 87649

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 13-Jun-16

Document Number: 91000

TPC13CA [VISHAY]

相关型号：

TPC13CAHM3/H

TPC13CAHM3/I

TPC13HE3/86A

TPC13HM3/86A

TPC13HM3/87A

TPC1425FN-84C

TPC1425FN84C

TPC1425GB-133C

TPC1425GB-133I

TPC1425GB133C

TPC1425GB133I

TPC1425VE160C