首页 |元器件品牌

TPC15HM3_A/H [VISHAY]

Trans Voltage Suppressor Diode, 1500W, 12.1V V(RWM), Unidirectional, 1 Element, Silicon, TO-277A,;
TPC15HM3_A/H
型号： TPC15HM3_A/H
厂家： VISHAY    VISHAY
描述：

Trans Voltage Suppressor Diode, 1500W, 12.1V V(RWM), Unidirectional, 1 Element, Silicon, TO-277A,

局域网 光电二极管
文件： 总5页 (文件大小：94K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
TPC6.8 thru TPC51A  
Vishay General Semiconductor  
www.vishay.com  
Surface Mount PAR® Transient Voltage Suppressors  
Uni-directional 1500 W TVS in TO-277 (SMPC) Package  
FEATURES  
eSMP® Series  
Available  
• Junction  
passivation  
optimized  
design  
passivated anisotropic rectifier technology  
A
• TJ = 185 °C capability suitable for high reliability  
and automotive requirement  
• Very low profile - typical height of 1.1 mm  
• Ideal for automated placement  
• Uni-direction only  
1
2
TO-277A (SMPC)  
• Excellent clamping capability  
• Low incremental surge resistance  
• Very fast response time  
Cathode 1  
A
Anode  
Cathode 2  
• Meets MSL level 1, per J-STD-020  
• AEC-Q101 qualified  
• Material categorization: for definitions of compliance  
please see www.vishay.com/doc?99912  
PRIMARY CHARACTERISTICS  
VWM  
5.50 V to 43.6 V  
6.8 V to 51 V  
1500 W  
VBR  
PPPM  
MECHANICAL DATA  
TJ max.  
Polarity  
Package  
185 °C  
Case: TO-277A (SMPC)  
Molding compound meets UL 94 V-0 flammability rating  
Uni-directional  
TO-277A (SMPC)  
Base P/NHM3  
AEC-Q101 qualified  
Base P/NHM3_X  
-
halogen-free, RoHS-compliant, and  
-
halogen-free, RoHS-compliant and  
AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ...,  
TYPICAL APPLICATIONS  
revision code only applicable for part number with  
tolerance)  
5 %  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching and lighting  
on ICs, MOSFET, signal lines of sensor units for consumer,  
computer, industrial, automotive, and telecommunication.  
Terminals: matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
HM3 suffix meets JESD 201 class 2 whisker test  
MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)  
PARAMETER  
SYMBOL  
PPPM  
IPPM  
VALUE  
1500  
UNIT  
W
Peak power dissipation with a 10/1000 μs waveform (fig. 3) (1)(2)  
Peak power pulse current with a 10/1000 μs waveform (fig. 1) (1)  
Peak forward surge current 8.3 ms single half sine-wave (2)  
Maximum instantaneous forward voltage at 100 A (3)  
Operating junction and storage temperature range  
See next table  
200  
A
IFSM  
A
VF  
3.5  
V
TJ, TSTG  
-65 to +185  
°C  
Notes  
(1)  
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2  
Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum  
Pulse test: 300 μs pulse width, 1 % duty cycle  
(2)  
(3)  
Revision: 15-Aug-16  
Document Number: 89056  
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
TPC6.8 thru TPC51A  
Vishay General Semiconductor  
www.vishay.com  
ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)  
BREAKDOWN  
MAXIMUM  
REVERSE  
LEAKAGE  
AT VWM  
MAXIMUM  
PEAK  
MAXIMUM  
MAXIMUM  
CLAMPING  
VOLTAGE  
AT IPPM  
VOLTAGE  
TEST  
CURRENT  
IT  
STAND-OFF  
VOLTAGE  
VWM  
DEVICE  
MARKING  
CODE  
REVERSE  
LEAKAGE  
AT VWM  
VBR (1) AT IT (V)  
PULSE  
DEVICE  
TYPE  
SURGE  
(mA)  
(V)  
TJ = 150 °C  
CURRENT  
MIN.  
MAX.  
IR (μA)  
VC (V)  
ID (μA)  
IPPM (2) (A)  
TPC6.8  
TPC6.8A  
TPC7.5  
TPC7.5A  
TPC8.2  
TPC8.2A  
TPC9.1  
TPC9.1A  
TPC10  
DDP  
DEP  
DFP  
DGP  
DHP  
DKP  
DLP  
DMP  
DNP  
DPP  
DQP  
DRP  
DSP  
DTP  
DUP  
DVP  
DWP  
DXP  
DYP  
DZP  
EDP  
EEP  
EFP  
EGP  
EHP  
EKP  
ELP  
EMP  
ENP  
EPP  
EQP  
ERP  
ESP  
ETP  
EUP  
EVP  
EWP  
EXP  
EYP  
EZP  
FEP  
FGP  
6.12  
6.45  
6.75  
7.13  
7.38  
7.79  
8.19  
8.65  
9.0  
7.48  
7.14  
8.25  
7.88  
9.02  
8.61  
10.0  
9.55  
11.0  
10.5  
12.1  
11.6  
13.2  
12.6  
14.3  
13.7  
16.5  
15.8  
17.6  
16.8  
19.8  
18.9  
22.0  
21.0  
24.2  
23.1  
26.4  
25.2  
29.7  
28.4  
33.0  
31.5  
36.3  
34.7  
39.6  
37.8  
42.9  
41.0  
47.3  
45.2  
49.4  
53.6  
10  
10  
5.50  
5.80  
6.05  
6.40  
6.63  
7.02  
7.37  
7.78  
8.10  
8.55  
8.92  
9.40  
9.72  
10.2  
10.5  
11.1  
12.1  
12.8  
12.9  
13.6  
14.5  
15.3  
16.2  
17.1  
17.8  
18.8  
19.4  
20.5  
21.8  
23.1  
24.3  
25.6  
26.8  
28.2  
29.1  
30.8  
31.6  
33.3  
34.8  
36.8  
40.2  
43.6  
1500  
1500  
500  
500  
200  
200  
50  
10 000  
10 000  
5000  
5000  
2000  
2000  
500  
500  
200  
200  
50  
139  
143  
10.8  
10.5  
11.7  
11.3  
12.5  
12.1  
13.8  
13.4  
15.0  
14.5  
16.2  
15.6  
17.3  
16.7  
19.0  
18.2  
22.0  
21.2  
23.5  
22.5  
26.5  
25.2  
29.1  
27.7  
31.9  
30.6  
34.7  
33.2  
39.1  
37.5  
43.5  
41.4  
47.7  
45.7  
52.0  
49.9  
56.4  
53.9  
61.9  
59.3  
64.8  
70.1  
10  
128  
10  
133  
10  
120  
10  
124  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
109  
50  
112  
20  
100  
TPC10A  
TPC11  
9.5  
20  
103  
9.9  
5.0  
5.0  
2.0  
2.0  
2.0  
2.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
92.6  
96.2  
86.7  
89.8  
78.9  
82.4  
68.2  
70.8  
63.8  
66.7  
56.6  
59.5  
51.5  
54.2  
47.0  
49.0  
43.2  
45.2  
38.4  
40.0  
34.5  
36.2  
31.4  
32.8  
28.8  
30.1  
26.6  
27.8  
24.2  
25.3  
23.1  
21.4  
TPC11A  
TPC12  
10.5  
10.8  
11.4  
11.7  
12.4  
13.5  
14.3  
14.4  
15.2  
16.2  
17.1  
18.0  
19.0  
19.8  
20.9  
21.6  
22.8  
24.3  
25.7  
27.0  
28.5  
29.7  
31.4  
32.4  
34.2  
35.1  
37.1  
38.7  
40.9  
44.7  
48.5  
50  
10  
TPC12A  
TPC13  
10  
10  
TPC13A  
TPC15  
10  
10  
TPC15A  
TPC16  
10  
10  
TPC16A  
TPC18  
10  
10  
TPC18A  
TPC20  
10  
10  
TPC20A  
TPC22  
10  
10  
TPC22A  
TPC24  
10  
10  
TPC24A  
TPC27  
10  
10  
TPC27A  
TPC30  
10  
10  
TPC30A  
TPC33  
10  
10  
TPC33A  
TPC36  
10  
15  
TPC36A  
TPC39  
15  
15  
TPC39A  
TPC43  
15  
20  
TPC43A  
TPC47A  
TPC51A  
20  
20  
20  
Notes  
(1)  
(2)  
(3)  
VBR measured after IT applied for 300 μs, IT = square wave pulse or equivalent  
Surge current waveform per fig. 3 and derated per fig. 2  
All terms and symbols are consistent with ANSI/IEEE C62.35  
Revision: 15-Aug-16  
Document Number: 89056  
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
TPC6.8 thru TPC51A  
Vishay General Semiconductor  
www.vishay.com  
ORDERING INFORMATION (Example)  
PREFERRED P/N  
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY  
DELIVERY MODE  
TPC10AHM3/86A (1)  
TPC10AHM3/87A (1)  
TPC10AHM3_A/H (1)  
TPC10AHM3_A/I (1)  
0.10  
0.10  
0.10  
0.10  
86A  
87A  
H
1500  
6500  
1500  
6500  
7" diameter plastic tape and reel  
13" diameter plastic tape and reel  
7" diameter plastic tape and reel  
13" diameter plastic tape and reel  
I
Note  
(1)  
Automotive grade  
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C, unless otherwise noted)  
100  
10  
1
150  
100  
50  
TJ = 25 °C  
Pulse Width (td)  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
TA = 25 °C  
Non-Repetitive Pulse  
Waveform shown in Fig. 3  
tr = 10 µs  
Peak Value  
IPPM  
Half Value -  
IPP  
2
IPPM  
10/1000 µs Waveform  
as defined by R.E.A.  
td  
0.1  
0.1 µs  
0
1.0 µs  
10 µs  
td - Pulse Width (s)  
Fig. 1 - Peak Pulse Power Rating Curve  
100 µs  
1.0 ms  
10 ms  
1.0  
3.0  
4.0  
0
2.0  
t - Time (ms)  
Fig. 3 - Pulse Waveform  
10 000  
100  
75  
50  
25  
0
VR, measured at  
Zero Bias  
VR measured at  
Stand-Off Voltage, VWM  
1000  
TJ = 25 °C  
f = 1.0 MHz  
Vsig = 50 mVp-p  
100  
1
10  
100  
50  
TJ - Initial Temperature (°C)  
0
100  
150  
200  
VBR - Breakdown Voltage (V)  
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature  
Fig. 4 - Typical Junction Capacitance  
Revision: 15-Aug-16  
Document Number: 89056  
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
TPC6.8 thru TPC51A  
Vishay General Semiconductor  
www.vishay.com  
100  
10  
1
RthJA, by mounted  
on recommended  
PCB 2 oz. area  
0.1  
0.01  
0.1  
1
10  
100  
1000  
Tp - Pulse Duration (s)  
Fig. 5 - Typical Transient Thermal Impedance  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
TO-277A (SMPC)  
0.187 (4.75)  
0.175 (4.45)  
0.016 (0.40)  
0.006 (0.15)  
A
0.262 (6.65)  
0.250 (6.35)  
0.242 (6.15)  
0.238 (6.05)  
2
1
0.047 (1.20)  
0.039 (1.00)  
0.171 (4.35)  
0.167 (4.25)  
0.146 (3.70)  
0.134 (3.40)  
Mounting Pad Layout  
0.087 (2.20)  
0.075 (1.90)  
0.189 (4.80)  
MIN.  
0.189 (4.80)  
0.173 (4.40)  
0.186 (4.72)  
MIN.  
0.268  
(6.80)  
0.155 (3.94)  
NOM.  
0.030 (0.75) NOM.  
0.049 (1.24)  
0.037 (0.94)  
0.050 (1.27)  
MIN.  
0.084 (2.13) NOM.  
0.053 (1.35)  
0.041 (1.05)  
0.041  
(1.04)  
0.055 (1.40)  
MIN.  
Conform to JEDEC® TO-277A  
Revision: 15-Aug-16  
Document Number: 89056  
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of  
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding  
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a  
particular product with the properties described in the product specification is suitable for use in a particular application.  
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over  
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.  
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for  
such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document  
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Revision: 13-Jun-16  
Document Number: 91000  
1

相关型号：

TPC16

 Surface Mount Automotive Transient Voltage Suppressors
VISHAY

TPC16/3-STF-10,16GY

 Barrier Strip Terminal Block,
PHOENIX

TPC160A12

 SINGLE UNIDIRECTIONAL BREAKOVER DIODE|213V V(BO) MAX|300MA I(S)|TO-220
ETC

TPC160A18

 SINGLE UNIDIRECTIONAL BREAKOVER DIODE|213V V(BO) MAX|300MA I(S)|TO-220
ETC

TPC160B12

 SINGLE UNIDIRECTIONAL BREAKOVER DIODE|193V V(BO) MAX|300MA I(S)|TO-220
ETC

TPC160B18

 SINGLE UNIDIRECTIONAL BREAKOVER DIODE|193V V(BO) MAX|300MA I(S)|TO-220
ETC

TPC16A

 Surface Mount Automotive Transient Voltage Suppressors
VISHAY

TPC16AHE3/86A

 Trans Voltage Suppressor Diode, 13.6V V(RWM), Unidirectional,
VISHAY

TPC16AHE3/87A

 Trans Voltage Suppressor Diode, 13.6V V(RWM), Unidirectional,
VISHAY

TPC16AHM3/86A

 DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMPC, 3 PIN, Transient Suppressor
VISHAY

TPC16AHM3/87A

 DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMPC, 3 PIN, Transient Suppressor
VISHAY

TPC16AHM3_A/H

 Trans Voltage Suppressor Diode, 1500W, 13.6V V(RWM), Unidirectional, 1 Element, Silicon, TO-277A,
VISHAY
©2020 ICPDF网 联系我们和版权申明