TPSMA18A-M3/5AT [VISHAY]
DIODE 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN, Transient Suppressor;
| 型号： | TPSMA18A-M3/5AT |
| 厂家： | 
VISHAY |
| 描述： | DIODE 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN, Transient Suppressor 局域网 光电二极管 电视 |
| 文件： | 总5页 (文件大小：80K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
New Product
TPSMA6.8 thru TPSMA43A
Vishay General Semiconductor
Surface Mount PAR® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Junction
passivation
optimized
design
passivated anisotropic rectifier technology
• TJ = 185 °C capability suitable for high reliability
• Available in uni-directional polarity only
• 400
W
peak pulse power capability with
a
10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
• Excellent clamping capability
DO-214AC (SMA)
• Very fast response time
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
• Halogen-free according to IEC 61249-2-21 definition
VBR
PPPM
PD
6.8 V to 43 V
400 W
1.0 W
40 A
MECHANICAL DATA
Case: DO-214AC (SMA)
IFSM
Molding compound meets UL 94 V-0 flammability rating
TJ max.
185 °C
Base P/N-M3
- halogen-free, RoHS compliant, and
commercial grade
TYPICAL APPLICATIONS
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
W
(1)(2)
Peak power dissipation with a 10/1000 μs waveform (fig. 3)
Peak power pulse current with a 10/1000 μs waveform (fig. 1)
Power dissipation at TA = 25 °C
PPPM
IPPM
PD
400
See next table
1.0
(1)
A
(4)
W
(3)
Peak forward surge current 8.3 ms single half sine-wave
Maximum instantaneous forward voltage at 25 A
Operating junction and storage temperature range
IFSM
40
A
(3)
VF
TJ, TSTG
3.5
V
- 65 to + 185
°C
Notes
(1)
(2)
(3)
(4)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads attached to each terminal
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum
Mounted on minimum recommended pad layout
Document Number: 89403
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
TPSMA6.8 thru TPSMA43A
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
VOLTAGE
VBR (1) AT IT
(V)
MAXIMUM
REVERSE
LEAKAGE
AT VWM
TJ = 150 °C
MAXIMUM
MAXIMUM
MAXIMUM
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
DEVICE
MARKING
CODE
PEAK PULSE CLAMPING
DEVICE
REVERSE
SURGE
CURRENT
IPPM (2) (A)
VOLTAGE
AT IPPM
VC (V)
LEAKAGE AT VWM
ID (μA)
(mA)
(V)
IR (μA)
MIN.
6.12
6.45
6.75
7.13
7.38
7.79
8.19
8.65
9.00
9.50
9.90
MAX.
7.48
TPSMA6.8
TPSMA6.8A
TPSMA7.5
TPSMA7.5A
TPSMA8.2
TPSMA8.2A
TPSMA9.1
TPSMA9.1A
TPSMA10
TPSMA10A
TPSMA11
TPSMA11A
TPSMA12
TPSMA12A
TPSMA13
TPSMA13A
TPSMA15
TPSMA15A
TPSMA16
TPSMA16A
TPSMA18
TPSMA18A
TPSMA20
TPSMA20A
TPSMA22
TPSMA22A
TPSMA24
TPSMA24A
TPSMA27
TPSMA27A
TPSMA30
TPSMA30A
TPSMA33
TPSMA33A
TPSMA36
TPSMA36A
TPSMA39
TPSMA39A
TPSMA43
TPSMA43A
ADP
AEP
AFP
AGP
AHP
AKP
ALP
AMP
ANP
APP
AQP
ARP
ASP
ATP
AUP
AVP
AWP
AXP
AYP
AZP
BDP
BEP
BFP
BGP
BHP
BKP
BLP
BMP
BNP
BPP
BQP
BRP
BSP
BTP
BUP
BVP
BWP
BXP
BYP
BZP
10
10
5.50
5.80
300
300
150
150
50
1000
1000
500
500
200
200
50
37.0
38.1
34.2
35.4
32.0
33.1
29.0
29.9
26.7
27.6
24.7
25.6
23.1
24.0
21.1
22.0
18.2
18.9
17.0
17.8
15.1
15.9
13.7
14.4
12.5
13.1
11.5
12.0
10.2
10.7
9.2
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.0
15.0
14.5
16.2
15.6
17.3
16.7
19.0
18.2
22.0
21.2
23.5
22.0
26.5
25.5
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.0
45.7
52.0
49.9
56.4
53.9
61.9
59.3
7.14
8.25
10
6.05
7.88
10
6.40
9.02
10
6.63
8.61
10
7.02
50
10.00
9.55
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
7.37
10
7.78
10
50
11.00
10.50
12.10
8.10
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
20
8.65
20
8.92
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
10.50 11.60
10.80 13.20
11.40 12.60
11.70 14.30
12.40 13.70
13.50 16.30
14.30 15.80
14.40 17.60
15.20 16.80
16.20 19.80
17.10 18.90
18.00 22.00
19.00 21.00
19.80 24.20
20.90 23.10
21.60 26.40
22.80 25.20
24.30 29.70
25.70 28.40
27.00 33.00
28.50 31.50
29.70 36.30
31.40 34.70
32.40 39.60
34.20 37.80
35.10 42.90
37.10 41.00
38.70 47.30
40.90 45.20
9.40
9.72
10.20
10.50
11.10
12.10
12.80
12.90
13.60
14.50
15.30
16.20
17.10
17.80
18.80
19.40
20.50
21.80
23.10
24.30
25.60
26.80
28.20
29.10
30.80
31.60
33.30
34.80
36.80
9.7
8.4
8.8
7.7
8.0
7.1
7.4
6.5
6.7
Notes
(1)
(2)
(3)
VBR measured after IT applied for 300 μs, IT = square wave pulse or equivalent
Surge current waveform per fig. 3 and derated per fig. 2
All terms and symbols are consistent with ANSI/IEEE C62.35
www.vishay.com
2
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 89403
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
TPSMA6.8 thru TPSMA43A
Vishay General Semiconductor
ORDERING INFORMATION (Example)
PREFERRED P/N
TPSMA6.8A-M3/61T
TPSMA6.8A-M3/5AT
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.064
61T
5AT
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
0.064
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
100
150
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
tr = 10 µs
Peak Value
IPPM
10
100
50
0
Half Value -
IPP
2
IPPM
1.0
10/1000 µs Waveform
as defined by R.E.A.
0.2 x 0.2" (5.0 x 5.0 mm)
Copper Pad Areas
td
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1.0
3.0
4.0
0
2.0
t - Time (ms)
td - Pulse Width (s)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 3 - Pulse Waveform
100
10 000
1000
100
VR measured
at Zero Bias
75
50
25
V
R measured at
Stand-Off, VWM
TJ = 25 °C
f = 1.0 MHz
sig = 50 mVp-p
V
0
10
1
10
VBR - Breakdown Voltage (V)
100
0
50
100
150
200
TJ - Initial Temperature (°C)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 4 - Typical Junction Capacitance
Document Number: 89403
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
TPSMA6.8 thru TPSMA43A
Vishay General Semiconductor
200
TJ = TJ max.
8.3 ms Single Half Sine-Wave
100
50
10
1
5
10
50
100
Number of Cycles at 60 Hz
Fig. 5 - Maximum Non-Repetitive Peak Forward Surge Current
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.074 (1.88)
MAX.
0.066 (1.68)
MIN.
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
www.vishay.com
4
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 89403
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
TPSMA18A-M3/61T
Trans Voltage Suppressor Diode, 400W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
TPSMA18AHE3/5AT
Trans Voltage Suppressor Diode, 400W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
TPSMA18AHE3/61T
Trans Voltage Suppressor Diode, 400W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
TPSMA18AHE3_B/H
Trans Voltage Suppressor Diode, 400W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, SMA, 2 PIN
VISHAY
TPSMA18AHE3_B/I
Trans Voltage Suppressor Diode, 400W, 15.3V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, SMA, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明